LiquiDuos2 A.I. PIMP my ROM
x
Acer Liquid Gallant Duo E350 (C8)
by Lucky76
(erlucky)
PLEASE READ BEFORE CONTINUING ATTENTAMEMTE FOLLOWING LINES. Thank you.
ATTENTION as always for clarity and do not take any responsibility for any malfunctions BRICK or several of your Acer E350 Liquid Gallant Duo due to the use of the changes, files and guides that I have proposed here, then do these steps at your own risk danger, and I recommend you perform them only after being certain that you understand what you do and you understand the meaning and having read and re-read this post and the various guides that you will find.
Any operating errors could affect the use of your smartphone forcing you to send it in for repair in service.
Flashing is a dangerous action and should be done very carefully.
First custom rom for this new device of Acer with dual sim. I created this rom is a first base for those who want to try their hand at their own customizations and various modding. The changes made are few so this first custom rom stays true to the original graphics as well as to present the app with only the addition of two new (Quick Boot and NofrillCPU). Do not think in exceptional increases the performance of your device, the purpose is to be a base to start working. Of course, this custom rom is already including Root with SuperUser.
Being the first custom rom for this device and one of the few around these devices based mtk65xx I wanted to BETA version for any bugs that may arise.
In the following lines I will try to make a detailed guide to installing a custom rom.
TECHNICAL SECTION
Type Device: Acer Liquid Gallant Duo E350 (C8).
Base Rom Used: OS_Acer_E350_1.000.18 EMEA.FR_A40I_A ---> used files: system.img and boot.img taken from the downloaded zip file.
Acer Rom Date: 25/10/2012
Links Official Acer Rom: Here
Links Official Acer France: Here
System Android: 4.0.3 ICS
INSTALLATION GUIDE
1. Pre Installation (Root, Recovery Mod and Advice)
A. Having the battery to 100%
B. Having a microSD almost 4 gb
C. Read and re-read again carefully review this guide and the guides for the root and recovery.
D. If you have not installed the SuperRecovery with Root passed through this Post and follow the step by step guide of ROOT. Then come back here and go to step E.
E. If you already have or you have just installed the SuperRecovery with Root continue with the installation of ClockworkMod 6.0.2.8 Beta 1 following the guidance found in this Post and then come back here and continue to drive through to step 2.
At this point, the first part is over and you will have your Gallant Duo with the permissions of the new Root and ClockworkMod Recovery installed.
2. Backup (System and Applications)
A. The market download a backup app like Titanium Backup (free) and take a backup of your applications that you have downloaded and installed earlier. Wipe carefully with you also lose all your sms and mms so if you do not want to lose save them with an app that you will surely find the Play Store.
B. Also from the market for those who have problems getting into Recovery with Vol + and Power download Quick Boot (Free).
C. Enter now in recovery using Quick Boot (if downloaded) Recovery choosing the menu for this app otherwise you have to turn off your device and enter the combination of the Vol + and Power.
D. Now you have to do a full backup system for restoring. Use the Volume keys go to the Backup and Restore menu and enter the Power Button.
E. In this sub menu drop down to the line "choose backup format" and confirm by pressing Power now get a line on the choice tar and confirm again with Power. You will set up the compression format. Tar.
F. Confirm that you see now on the first choice and that is "up" with the usual power button. Now just wait until the full backup! your Device (boot.img, recovery.img, System, Data and Cache).
G. Using the Volume keys go to the line + + + + + Go Back + + + + + and press Power.
H. Finally, again by pressing Power up line reboot system now to restart your device.
I. With the device turned on connect it to your PC using the USB cable and you will see the microSD ext (sdcard2) a new folder "ClockworkMod" for further safety advice to copy it to your PC. Else within the full backup of your system and then again get done just before a backup inside your PC.
Now the second point is finished so if you're still not convinced continue with the guide and go to step 3 to flash the custom rom.
3. Installing Custom Rom (Download, Wipe, Flash)
A. Downloaded from the link at the bottom of the page in the section DOWNLOAD my custom rom.
B. Copy it into your microSD
C. Restart your Gallant Duo Recovery with Quick Boot or Off with the usual combination of buttons Vol + and Power
D. First of all we have to do a clean install to make the two Wipe in the recovery. Then go to the line "wipe data / factory reset" and confirm by pressing Power. Do the same with the next choice "wipe cache partion". You will have reported at this point your device to factory state as the first starting of the engine.
E. Finally you are ready to flash your custom rom going on line "install zip from sdcard" and confirm by pressing Power.
F. Again confirmed on the first choice "choose zip from sdcard" with Power.
G. Now you have to choose the file you want to install name_custom_rom.zip. For my custom rom LiquiDuos.zip confirming with the usual Power button.
H. Finally get off the line and confirmed - Yes - Install LiquiDuos.zip. ----> Finally will start the installation.
I. Wait until the installation is finished.
L. Restart your device confirming the line reboot system now.
M. Reset all like the first time. If you synchronize your account you will download the app you previously installed and any updates. Otherwise downloaded from the market or install Titanium Backup and reinstall the app that you had previously saved at the beginning of this guide.
SECTION DOWNLOAD
Link custom rom LiquiDuos 2 A.I. PMR ---> Here
md5sum ---> b2e959c886a9b2c3e50f53f37cfebbc9
Link custom rom LiquiDuos 1 beta ---> Here
md5sum ---> b21f4aa8e8b038a4bf438d7a7f4aa660
SECTION CHANGELOG
LiquiDuos 2 A.I. PMR
1. Installation with Aroma Installer
2. Set your rom
3. Aroma Installer with Pimp my Rom
4. Possibility of choice for memory Internal/External
5. Added Apps from 4.2 JB
6. Altro
Click to expand...
Click to collapse
LiquiDuos 1 beta
1. Added SuperUser for Root
2. Added Busybox
3. De-ODEX files
4. Added function / data / app
5. Added function / etc / init.d
6. Adding app Quick Boot
7. Adding app noFrillCpu
8. Changed ro.secure=0 on Boot
9. Added ADB Boot
Click to expand...
Click to collapse
SECTION BUG SOFTWARE and HARDWARE
SOFTWARE BUG:
BUG HARDWARE:
If you find any bugs please report hardware or software in this post so you will to solve them.
SECTION CREDITS
PaulOBrien ---> For its SuperRecovery with Root. (MoDaCo) ---> Link
Bin4ry ----> for his root method
dsixda ---> For your HTC Android Kitchen 0.220. (XDA) ---> Link
Koush Dutta ---> For its ClockworkMod ---> Link
Tuttoandroid.net ---> To web space and exclusive of my rom ---> Link
XDA Forum
Amarullz ---> For Aroma Installer ---> Link
Androguide.fr ---> Per il loro PIMP my ROM (ver. A.I.) ---> Link
Bye
I'm using it since two days, and it's working well :good:
Thanks
groovyloul said:
I'm using it since two days, and it's working well :good:
Thanks
Click to expand...
Click to collapse
Thank you....
Hello Erlucky,
Can you please post LiquiDuos 2 here to I am not allowed to download in the Italian forum and my registration was not a success due to lack off my Italian.
johnny7556 said:
Hello Erlucky,
Can you please post LiquiDuos 2 here to I am not allowed to download in the Italian forum and my registration was not a success due to lack off my Italian.
Click to expand...
Click to collapse
I did....
I have posted here.
Bye.
is this JB rom?
thanks in advance
hi to all,
I just wanted to say that i have updated my gallant duo to a new version of android (always ICS): the "Acer_AV40I_E350_1.000.23_EMEA.FR"
I think that the this rom should be updated because it is stopped to "Acer_E350_1.000.18 EMEA.FR_A40", i'm not able but if someone could it will be great
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
Radeon ROM - http://d-h.st/PnP
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WBY4ca
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Facebook Support Group - https://www.facebook.com/groups/Micromaxcanvas2
kishoredroid said:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
DZire ROM - http://bit.ly/TT21dQ
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WlCPL6
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Click to expand...
Click to collapse
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
afzi said:
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
Click to expand...
Click to collapse
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Give the right way
kishoredroid said:
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Click to expand...
Click to collapse
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
afzi said:
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
Click to expand...
Click to collapse
This ROM does not work. so removing it from the post.
sunilnair007 said:
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
Click to expand...
Click to collapse
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Removed system file from Micromax A110
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
maverick083 said:
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
Click to expand...
Click to collapse
Did you try flashing stock ROM V2 with the flash tool in the post? That will rewrite everything.
kishoredroid said:
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Click to expand...
Click to collapse
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
sunilnair007 said:
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
Click to expand...
Click to collapse
Cant get what you are trying to say. But download and install the drivers from the given link and try flashing your phone to stock ROM V2
Guys who would like to try out xperia launcher for their handsets can visit :
http://forum.xda-developers.com/showthread.php?t=2095956
Recovery not working
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
The stock V2 ROM..!
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
nehalchoraria said:
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Click to expand...
Click to collapse
you cannot flah T2 via flash tool. go to /system/recovery-from-boot.p and rename it to 'recovery-from-boot.p.bak' and then try to flash stock recovery from MUT
violin.siva said:
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Flash it through CWM recovery
Arnav06 said:
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
Click to expand...
Click to collapse
Yes.. you successfully flashed V2!
Cynus T2 ROM
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
JogyGeorge said:
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
Click to expand...
Click to collapse
Im on T2, no niggles. And it is getting detected without issues on the same win 7. When you connect your phone in factory mode, t2 will be recognized.
this tutorial will help you root and install clockwork recovery and it is not my creation .you can find the tutorial here
the creator of the topic on this forum is to be given thnks for the collective info.myself i gathered all the infos here
if you suceed and install recovery on zte u950 probably you will see a chinese recovery menu ,as the huwai quad core use the same geno mod recovery the explanation of the recovery is as follow.
to flash custom rom follow steps 3-4-5.
[*] Reboot system now
[*] Select zip to flash/install
[*] Wipe data
[*] Wipe cache
[*] Backup and restore
[*] Flash memory/Format
[*] Advanced setting
[*] Turn off phone
Click to expand...
Click to collapse
3. Scroll to select option 3 (Wipe data), confirm the wipe
4. Scroll to select option 4 (Wipe cache), confirm the wipe as well
5. Scroll to select option 2 (Select zip to flash/install)
I am not to blame if you didnt follow the steps correctly as i am not a dev myself .but i did search a lot for those infos so a thnks button if all is ok will be appreciated
Thank You for the tutorial
Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.
Battery Draining issue!
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!
ubaid88 said:
Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.
Click to expand...
Click to collapse
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update
azhar63 said:
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update
Click to expand...
Click to collapse
I'm still using this fantastic rom and want its update. So if any body finds please inform me.
malick186 said:
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!
Click to expand...
Click to collapse
I don't have any battery draing issue in this fixed ROM
Any method to flash jellybean via odin....
How to put a custom rom on your mediatek device
this tuturial os for OEM rebrands of "Chinese Manufactured" phones
Warning: if your phone isnt has a commercial OEM Brand, think twice before putting a custom rom on it, you must find a experience about Mediatek devices, before you proceed.
Requirements:
1. Fully Working Unit ( with atleast 50% battery )
2. Relaible Internet connection
3. Good Google Search Skills
4. Lasest Mobile Uncle App ( Link here )
5. Recovery ( its a ".img" file )
6. Custom Rom ( its a ".zip" file )
What will Happen After:
1. All your Apps would possibly be gone ( you can redownload )
2. you have root privalages
3. you Have a custom rom on device
Step 1: first you must root your device
Step 1.1: list of Rooting Apps for PC and Android
Step 2: Find an Apropriate Recovery and Custom Rom( must be the exact recovery/rom for your device, unless it wont work )
Step 2.1: Google the Following Terms:
- "[name/model of Device] CWM Recovery"
- "[name/model of Device] TWRP Recovery"
- "[name/model of Device] Custom roms"
Goal: the goal is to find the ".img" file recovery, and the ".zip" file Custom Rom
Note: from there, you are on your own on how to download those files.
Step 2.2: If you cant find any on those search terms, try these:
- "Rebrand of [name/model of Device]"
Goal: is to find the Rebrand Version ( means exact device but different country or brand ) of your device
Note: check "ALL" the specs of the device if its a match, if you found it proceed to "Step 2.3"
Step 2.3: Google...
- "[name/model of rebrand device] Custom Roms"
- "[name/model of rebrand device] CWM Recovery"
- "[name/model of rebrand device] TWRP Recovery"
Goal: is to find the custom rom and recovery for the rebrand device, which is can be used to yours.
Step 2.4: if you really cant find any, just log-in to your Facebook Account, and Search for a fan group of your device, from there you may find a Recovery and Custom Rom files
Step 3: now you have the requirements, lets install the Rom
Step 3.1: Copy your "Custom Rom" and "Recovery" on Internal "AND" External Storage of the Phone, if you dont have enough space, please delete or back up some of your files
Step 3.2: Install Mobile Uncle App
Step 3.3: After installing open Mobile Uncle App and "grant root access" on your device
Step 3.2: Now go to Recovery Update, and select the recovery.img you downloaded
Goal: is to install Custom Recovery, by installing the ".img" that you put on internal or external
Step 3.4: if its said reboot to recovery, click yes!
GOal: to go to the recovery, for few seconds it will reboot, and you will the the interface of the recovery, if it doenst go to recovery, you repeat the process of installing the recovery, or you got the wrong ".img" for your device, and you must find the proper one again.
Step 4: Back Up Current/Stock Rom
- For CWM Recovery ( ClockWorkMod )
How to Use: Volume UP = UP, Volume Down = Down, Power = Select, Back Button = Back )
Step 4.1: go to...
- Back up and restore
- Then select Back Up or Back up to internal/external SD Card
Warning: if it fails, reboot to Android, and delete/back up again all the files
- For TWRP Recovery ( Team Win Recovery Project )
How to use: it is touch based
Step 4.1: go to...
- Back Up
- Put "X" mark on each box ( "x" means select or "check" )
- Slide to Back up
Warning: if it fails, reboot to Android, and delete/back up again all the files
Note: it will now start to back up, you can charge the phone while backing up or connect it to your PC, and wait for the process to complete
Step 5: Put the Custom Rom on your device
- For CWM Recovery
Step 5.1: go to...
- Install Zip
- "Choose Zip from /sdcard" or "Choose Zip from extsdcard
- Then Find the ".zip" file you put there
- and click "yes"
Note: it will now start to Install the Rom, you can charge the phone while installing the rom or connect it to your PC, and wait for the process to complete
Warning: if it fails, you got a wrong/corrupt custom rom and you must download another or you must find a TWRP recovery for your device
- For TWRP Recovery
Step 5.2: go to...
- Install Zip
- Find the ".zip" file you put on both internal and external
- and Slide to Install
Note: it will now start to Install the Rom, you can charge the phone while installing the rom or connect it to your PC, and wait for the process to complete
Warning: if it fails, you got a wrong/corrupt custom romand you must download another or you must find a CWM recovery for your device
Step 5.3: if everything now goes smooth, it finnished the installing of the rom, without warning you must factory reset your device, to avoid Bootlopp ( Softbrick )
- For CWm
Step 5.3.1: go to...
- Wipe Data / Factory Reset
- and yes
- then Advanced
- Wipe Dalvik Cache ( Select "Yes" if it prompt )
- then Reboot
- For TWRP
Step 5.3.1: go to...
- Wipe
- Mark "x" only "Data", "Cache", "Dalvik Cache"
- Then Slide
- After Thar Reboot to System
Note: if you do exactly everything, it must boot to android, and everything should be working smoothly