some of you get an error or hanging on superoneclick step6
or just with superoneclick.
KPE
this rooting package ( i found here: androidadvices.com/root-samsung-galaxy-sl-i9003-gingerbread-xxkpe-234-firmware/3/ ) is including cwm ,superuser and tweak manager
1. Download androidadvices.com/downloads/I9003XXKPE_RootingPackage.zip (rooting package)
:: extract - if it prompts you to enter in the password then enter the password as “androidadvices.com” without the inverted comas.
2. Start the Odin.exe
:: select the “CF-ROOT – I9003 – Beta.tar” file on the PDA-tab
3. Turn off and then on into download mode (hold buttons:
- volume down
- power
- home)
4. If Odin shows ID : COM press Start
5. finished root if it shows green field ;D
Some are reporting Kernel Panic Upload Mode (its the android bluescreen).
I have it after first time booting - take out battery to "ignore" these errors
KPH
this rooting package ( i found here: forum.xda-developers.com/showthread.php?t=1201062 ) is including the same like KPE
1. Download forum.xda-developers.com/attachment.php?attachmentid=710540&d=1315210336 (rooting package)
:: extract
2. Start Odin
:: select the downloaded file on the PDA-tab
3. Turn off and then on into download mode (hold buttons:
- volume down
- power
- home)
4. If Odin shows ID : COM press Start
5. finished root if it shows green field ;D
the kph doesnt contains kernel panic errors =)
well we are all focusing on things that are KPH and i dont think anyone has KPE installed.....but thanks
KPH added. testet on my new i9003 - works fine
hi. i had installed xxkpe and rooted using the file provided using the steps as mentioned by you. i face kernel panic. so i upgraded to xxkph and i do not face kernel panic but my phone randomly reboots itself and ends in a bootloop till i take the battery out. when i do, my phone does a soft reset and i lose all my data. can anyone help? this happens on kpe/kph and kpm alike.
when already we have cf root why to do all these un-necessary steps...?
Because it doesnt exist the mome.t i post it
Sent from my GT-I9003 using XDA App
hey guys,
i've a big problem with my Samsung P6800.
After problems with CM9, i got a Bootloop and an error within CWM: Davlik Cache -> E:unknown volume for path [sd-ext]
So I tried restoring an old NAND-Backup, but of course without SD access I wasn't successful.
Next option: Get back to Stock Rom via ODIN (the first time ODIN was closed by Windows during the flash action):
1. Start Odin and select the pit file from Sammobile
2. Plug in Tab in Download Mode
3. "Start" -> Success
4. Unplug
5. Select the newest ATO (P6800XXLQ2_P6800OXALQ2_ATO) in "PDA"-Field
6. Plug in Tab in Download Mode
7. "Start" -> Fail-Message when trying to Flash "KERNEL".
What can I do? Is it right to only select the ROM in the PDA field?
I don't have any access to the recovery anymore.
If you have any solution or tipp, please let me know
greetz!
Thomas
I want to install a custom rom on my phone for the first time,,, I am a noob, so can any one guide me the exact process what i have to do to install a custom jelly bean rom.
My phone is currently on stock gingerbread 2.3.6
My phone is unrooted, so please guide me step by step, to root it and to install a custom rom.... I hope somebody helps me...
I think after some search you should have learnt :thumbup:
But i'll give an advise ,firstly search cf root file which is suitable one according to your baseband like xxkpq etc.
Sent from my GT-I9003 using xda app-developers app
best way to do it bug free is...
first get the odin software in pc , then download the stock xxkpe rom (google them to get) . Now download the cf-root for xxkpe rom (i9003) .
mostly you will get the procedure for installing and rooting on the same page from where u'll download the above mentioned files (its in very easy steps).. Now when you are successfully rooted , download the CM10 alpha 4 (jelly bean for i9003) from xda , also get the latest gapps file.
Now store these two zip files (DO NOT EXTRACT THEM) in your memory card (don't put them in folders) , now power off the phone & restart in recovery mode (vol up+ home+power) then go to wipe data/fact. reset and hit ok, also clear the db data in advance menu , once done go to 'install zip from sd card' then select the CM10 file & install ....after installing , again do wipe data then go to 'reboot in recovery' (this will reboot ur phone and take u back to recovery menu) . Now again install zip from sd card & this time select the gapps file. once done go to reboot device. Now ur phone will boot in CM 10 style (first boot takes much time so be patient) & DONE ......congo, you have now a galaxy i9003 with jelly bean ........and now you are free to try all cm10 based roms like x-gamerz, ehndroix , etc just flash them from recovery as directed by the developer of that specific rom......hope it helped..
Sent from my GT-I9003
HIT THANKS IF HELPED!!!
glydarzx said:
best way to do it bug free is...
first get the odin software in pc , then download the stock xxkpe rom (google them to get) . Now download the cf-root for xxkpe rom (i9003) .
mostly you will get the procedure for installing and rooting on the same page from where u'll download the above mentioned files (its in very easy steps).. Now when you are successfully rooted , download the CM10 alpha 4 (jelly bean for i9003) from xda , also get the latest gapps file.
Now store these two zip files (DO NOT EXTRACT THEM) in your memory card (don't put them in folders) , now power off the phone & restart in recovery mode (vol up+ home+power) then go to wipe data/fact. reset and hit ok, also clear the db data in advance menu , once done go to 'install zip from sd card' then select the CM10 file & install ....after installing , again do wipe data then go to 'reboot in recovery' (this will reboot ur phone and take u back to recovery menu) . Now again install zip from sd card & this time select the gapps file. once done go to reboot device. Now ur phone will boot in CM 10 style (first boot takes much time so be patient) & DONE ......congo, you have now a galaxy i9003 with jelly bean ........and now you are free to try all cm10 based roms like x-gamerz, ehndroix , etc just flash them from recovery as directed by the developer of that specific rom......hope it helped..
Sent from my GT-I9003
HIT THANKS IF HELPED!!!
Click to expand...
Click to collapse
Dude you forget ddlf2 step!!!!!
Correct steps: xxkpe/ddlf2/root ddlf2/flash cm10/enjoy...
Sent from my GT-I9003 using xda premium
No dude,this is also a possible way,as i did.
-xgamerz v3-
I followed these videos to root my i9003 and install Jelly Bean:
hello guys,
i have recently purchased a Galaxy S dous S7562.....
but did not found a good & working method for rooting & unrooting this Phone Model.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so i tried methods like this --> method1 & method2 ,etc....
But the one which is easiest & secure is using a software called :-> UnlockRoot Pro
It is One Click Tool which can Root / Unroot our device [tested by me] :--> download from here
Requirements :--->
1. UnlockRoot Pro/free
2. Samsung USB Drivers
3. USB cable
4. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
Rooting Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. download the unlockroot free tool & extract on desktop or anywhere.
4. On ur phone >> goto Settings>Development> tick the option USB Debugging
5. Now Attach ur Phone with PC using Original USB cable.
6. open the "unlockroot.exe" extracted on desktop
7. u will see a dialog box that "do you want to add a battery saver app on ur phone"
8. u can click on yes or no according to ur need.
9. then u will be asked to "rooted successfully & reboot ur device"
10. click on "yes" & ur device will be automatically rebooted & u will see a new app [ supersu in ur AppDrawer ]
11. Ur phone is rooted now...
12. enjoy :good::victory:
UnRooting Tutorial :-->
1. same as above .......just choose on "unroot" option @ 6th step
2. follow onscreen instruction
3. Enjoy..:good::victory:
I think this is the easiest method & secure method of rooting ur device
regards,
abhi922.
No Need to say thanks, just press thanks button ..
How to Update Samsung Galaxy S Duos S7562 model to Official Stock Roms
This tutorial shows you how to Flash stock Firmware using Odin on Galaxy S Dous [S7562]
Requirements :--->
1. ODIN 3.07
2. Samsung USB Drivers
3. Stock Firmware
4. Official USB cable
5. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
Flashing Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. Download the ODIN 3.07 & save it in your PC and extract its content to Desktop.
4. Download the update firmware.zip && save it in your PC and extract the update file on your Desktop.
5. Now, turn off your Samsung Galaxy S duos device
6. Boot your S Duos device into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
7. now ur phone will boot into download mode ........u will see a "WARNING" like following pic.....
8. now press "VOLUME UP" button to enter into download mode :--> like the following pic -->
9. Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10. When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11. click on PDA button && select the S7562XXXXXX_S7562XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12. now click on "START" button & it will take some time to flash the firmware ....
Note:-> DON'T interrupt the flashing process, it may brick ur device [ soft or hard brick]
13. U will see a "PASS" & "RESET" on ODIN application...
14. Ur phone will reboot automatically & u should be booted successfully ....
15. enjoy :good::victory: [ u have flashed stock firmware successfully on ur device ].
F.A.Q :->
1.) If the ODIN get stuck ?
ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
2.) If your device gets a Boot Loop [ boot animation agian & agian ] ?
ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
Direct download links for latest firmwares of some countries :---------->
1. Latest INDIAN Firmware :--> http://www.hotfile.com/dl/229449042/0829279/S7562XXBMF2_S7562ODDBMF1_INS.zip.html
2. Latest Pakistan Firmware :-> http://www.hotfile.com/dl/182607517/5c4a6e7/S7562XXALJ4_S7562OJVALJ1_PAK.zip.html
3. Latest Australia Firmware :-> http://www.hotfile.com/dl/182237627/6d44880/S7562XXALIC_S7562XSAALI4_XSA.zip.html
3. Latest Malaysia Firmware :-> http://www.hotfile.com/dl/181722186/1341499/S7562XXALJ4_S7562OLBALH5_XME.zip.html
3. Latest Sri Lanka Firmware :-> http://www.hotfile.com/dl/229450235/834a3ca/S7562XXBMF2_S7562ODDBMF1_SLK.zip.html
regards,
abhi922.
This tutorial shows you how to install cwm recovery using Odin on Galaxy S Dous
This tutorial shows you how to install cwm recovery using Odin on Galaxy S Dous [S7562]
Requirements :--->
1. ODIN 3.07
2. Samsung USB Drivers
3. Custom recovery [cwm] [custom by vikassaini01 ]
4. Official USB cable
5. Rooted rom.
6. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
Tutorial :-->
1. install any root file explorer like root explorer,root manager.
2. goto system>etc>
3. delete install-recovery.sh file or change its extension like install-recovery.sh.bak
4. now follow the above Flashing procedure [from post-2] [step from 1 to 3]
5. then download the above recovery.tar
6. follow the above Flashing procedure [post-2] [step from 5 to 10]
7. then choose "recovery.tar" in PDA section
8. follow the above Flashing procedure [post-2] [step from 12 to 15]
reboot & u have cutom recovery [cwm] in ur phone....
How to access cwm recovery :--->
Method 1 :-->
1. switch of ur phone.
2. press combination of keys [ Vol_Up + Vol_Down + Power + Home ]
3. u will be in cwm recovery
4. take backup & restore & flash custom roms , etc....
5. enjoy.
Method 2 :-->
1. install ClockworkMod ROM Manager.apk
2. open it & choose 2nd option---> " reboot into recovery "
3. u will se popup for confirmation & click on "yes"
4. ur phone will boot into recovery automatically.
[ warning : ClockworkMod ROM Manager has bricked so many phones so beware of using it ... ]
Remove Yellow triangle from boot menu ...
This tutorial shows you how to remove yellow triangle
from Galaxy S Dous [S7562] BOOT Menu ..
Requirements :--->
1. Triangle away app
2. stock firmware [ refer 2nd POST ]
note :-> click on above requirements to download them..
Tutorial :-->
1. FIRST of all flash stock firmware using ODIN [tutorial from 2nd post of this thread ]
2. Root ur stock rom without ODIN [ follow tutorial on 1st post ]
3. then install this triangle away app from above link
4. give root permissions & choose option "reset flash counter"
5. now u can UnRoot ur phone to get factory reset phone [ follow 1st post ]
6. enjoy
[ NOTE :-> This method is useful when u need to repair ur phone from official samsung center ]
stock deodexed rom by me comming soon...................
may be in btw a week
last one reserved..
UnlockRoot Pro worked for me
i find update for Superuser from the installed version (0.96)by UnlockRoot Pro to 1.34
is there any need to update , will work fine,
please confirm
ps : i did install busy-box (needed for some rooted apps to work)
gn_hanna said:
UnlockRoot Pro worked for me
i find update for Superuser from the installed version (0.96)by UnlockRoot Pro to 1.34
is there any need to update , will work fine,
please confirm
ps : i did install busy-box (needed for some rooted apps to work)
Click to expand...
Click to collapse
yes , there is no problem if u update it from playstore...
so update it if u want.
also u have to install busy-box to make some apps work like pimp up my rom.........
regards,
abhi922.
can we use I9190 Official Rom??
there is a link to download Samsung Galaxy S4 Mini Duos (GT-I9192) firmware.
it can be downloaded from here: http://www.sammobile.com/firmwares/
can we modify this rom for Galaxy S Duos??
shayanagha85 said:
there is a link to download Samsung Galaxy S4 Mini Duos (GT-I9192) firmware.
it can be downloaded from here: http://www.sammobile.com/firmwares/
can we modify this rom for Galaxy S Duos??
Click to expand...
Click to collapse
MAY BE
i will take a look at this....
help
I think i have bricked my s duos while trying to flash a kernel using odin now it is showing an error updating firmware get into recovery mode using kies. what should i do , flash a stock rom using odin??please help me solve this problem ...:angel:
@abhi922 please please upload stock deodexed rom
im gonna try this :good:
abhi922, mate i wanna ask if any flash file i mean the country it is possible use to Galaxy S duos?
That worked on my S Duos.
I was wondering what is our device name, I mean Galaxy Y is totoro explorer is Pico, what is S duos
Sent from my Surprise Galaxy S 3
Thanks for the guides, very usefull.
The rom I downloaded from sammobile was nearly 552mb and the one given in the kor thread is 882 mb
Why is the difference
Sent from my Rooted Galaxy S3
abhi922 said:
hello guys,
i have recently purchased a Galaxy S dous S7562.....
but did not found a good & working method for rooting & unrooting this Phone Model.
View attachment 2049695
so i tried methods like this --> method1 & method2 ,etc....
But the one which is easiest & secure is using a software called :-> UnlockRoot Pro
It is One Click Tool which can Root / Unroot our device [tested by me] :--> download from here
View attachment 2049626
Requirements :--->
1. UnlockRoot Pro/free
2. Samsung USB Drivers
3. USB cable
4. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
Rooting Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. download the unlockroot free tool & extract on desktop or anywhere.
4. On ur phone >> goto Settings>Development> tick the option USB Debugging
5. Now Attach ur Phone with PC using Original USB cable.
6. open the "unlockroot.exe" extracted on desktop
View attachment 2049661
7. u will see a dialog box that "do you want to add a battery saver app on ur phone"
8. u can click on yes or no according to ur need.
9. then u will be asked to "rooted successfully & reboot ur device"
10. click on "yes" & ur device will be automatically rebooted & u will see a new app [ supersu in ur AppDrawer ]
11. Ur phone is rooted now...
12. enjoy :good::victory:
UnRooting Tutorial :-->
1. same as above .......just choose on "unroot" option @ 6th step
View attachment 2049670
2. follow onscreen instruction
3. Enjoy..:good::victory:
I think this is the easiest method & secure method of rooting ur device
regards,
abhi922.
No Need to say thanks, just press thanks button ..
Click to expand...
Click to collapse
what if im running a custom rom ?
dont i have to flash the stock firmware after unrooting? :/
funnypharmacist said:
The rom I downloaded from sammobile was nearly 552mb and the one given in the kor thread is 882 mb
Why is the difference
Click to expand...
Click to collapse
My downloaded KOR has only 427.282.699 Bytes.
i have purchesed galaxy s duos. this phone shows network problem, no signal. what will i do? i rooted this phone.
---------- Post added at 04:45 PM ---------- Previous post was at 04:39 PM ----------
Omkar$ said:
@abhi922 please please upload stock deodexed rom
Click to expand...
Click to collapse
link to download any galaxy stock rom::http://samsung-updates.com/
BEST SITE, NO NEED SIGN IN< FIND UR MODEL AND DOWNLOAD.
Having A Problem with E://mount/cache,Installation Aborted!!?
Cracking ur head on what to do! Here is the solution-->
EXAMPLE:
Can't Root Your Device
Some Functions Doesn't Work
Can't Install CWM OR A Custom Recovery
BOOT LOOPS
Another Problems
Here Is How to Solve It !!
BEFORE WE START
WARNINGS
THIS WILL DELETE EVERY THING IN YOUR PHONE
MAKE A BACKUP!!!!!!!!
What You Need
1.Download The 4 Files Frimware + Pit File HERE: http://www.mediafire.com/download/va...E8_OXEAME4.zip
2.Odin 3.07 Here : http://www.mediafire.com/download/cx...jt/Odin307.rar
3.Download Another Frimware For I8262 From Sammobile.com
Installation!!
1.Open Odin
2.Put Your Phone In download Mode
3.Connect it To PC
4.Put The 4Files As Follow
5.Put The Pit File In Pit Section up As in the Photo
6.Another Warning This Will Delete All Your Data
7.Another Warning Displacing the files in a Different Way May Brick Your Phone LOOK AT THE Photo CAREFULLYYYYY
8.Click Start
9.After It Says Pass Wait Until The Phone Displays The First Setup Up Screen
10.After It Shows Up Take The Phone Battery out
11.Wait 10 Seconds
12.Put it Back
13.Go To Download Mode Again
14.Now Install The Sammobile Frim. That You Have Downloaded Using Odin
15.Some one Will Ask Me Why To Install A Frim Again
bec The 4Files + Pit File Is For FIXING PROBLEMS ONLY NOT FOR USE
16.After Odin Finish It May Stuck in The Logo
17.Don't Freak Out
18.Get Off The Battery
19.Go To Recovery Mode : Wipe Data / Wipe Cache / Wipe Dalvik cache
20.SETUP
Enjoy Finshed
If You Want Any Help Let Me Know In The Comment
This was originally posted by memoyasso,I shared it because of title!
IF I Helped You Just Please Press Thanks! Button