Hi everyone,
I am a user of Samsung i5801. My device has been already rooted and ran with serveral root apps. Now, I would like to overclock my phone. I can only hold the frequency at 667Mhz with SetCPU, but I cannot set it to a higher one. How can I solve this problem? I really want to make my device running faster.
I am looking forward to your reply, thank you!
me 2!!
same fr me i want to overclock my rooted i5801...some 1 pls help!!
and if possible for the froyo version 2!!
iv searched the web but cant find any roms for the 15800 or i5801..
@unreal: yeh, even i waz searchin' lyk a hell for froyo on ma i5801 device but now no more search coz i already installed froyo on ma apollo i5801..
juz follow the steps:
What you will NEED!
1. A Samsung Galaxy 3 (DUH!).
2. The 2.2 Firmware
3. ODIN downloader
4. OPS files
5. A windows PC + samsung data cable.
download files:
firmware: I5800XXJPA.rar (108.32 MB)
Odin downloader : I5800_Odin_Multi_Downloader_v4.252.exe (435 KB)
ops files :apollo_0531.zip (207 Bytes)
then back up ya device with latest kies,afta back up juz reset to factory settings by typing *#*#7780#*#* in case not necessary though,
STEP 1
Download all the files above, and make sure you have the latest version of KIES software installed.
STEP 2
Extract the RAR to get a .tar file.
STEP 3
Open ODIN Downloader.
MAKE SURE you select One Package, Auto Reboot and Protect Ops checkboxes.
Select the Ops file (the file we downloaded earlier).
And finally select the tar package we extracted from the RAR earlier.
NOW CLOSE ODIN.
STEP 4
Backup you phone and data with the KIES software (after you are done exit KIES)
Turn OFF the Galaxy 3 and remove the Battery
Reinsert The Battery and Press the following buttons together
Home + Menu + Volume + Power
(it could be volume up / volume down / volume up+down , So, try all three)
Hold the buttons together till you see the downloading screen.
Step 5
Now Connect your Phone with your PC using the ORIGINAL DATA cable and wait for windows to finish installing the hardware
Once you get a prompt – “the device is ready to use”
Fire up ODIN DOWNLOADER (make sure the settings are same as before) Your phone will now show up connected in Com Port
STEP 6 (Final Step)
CLICK START and wait for process to finish, once done your device will automatically reboot and will have Android 2.2 running on it.
Enjoy!
I am a Hong Kong user, can I use this firmware update?
Overclocking
Dude you need a kernel that supports overclocking. obviously stock ROM doesn't suuport.
some links for kernels:
best out there : http://forum.xda-developers.com/showthread.php?t=997367
g3mod: http://forum.xda-developers.com/showthread.php?t=1252707
enjoy ...
My phone gives black screen almost 5 to 6 times an hour.I have to 're insert the battery n reboot it. I think it's a soft brick. What I did was
I was on kpu using thefrankenstien rom then went on to kpe>kpe>kpq>remics v1.5.
Please help.
Sent from my GT-I9003 using xda app-developers app
Come on!.no one to help me here? Need urgent help.
Sent from my GT-I9003 using xda app-developers app
I think u have to make a clean install with pit->kpe->kph->kpq->kpu with the latest cf-root and then the Rom from ext.sd via cwm
Sent from my GT-I9003 using xda app-developers app
ollivong said:
I think u have to make a clean install with pit->kpe->kph->kpq->kpu with the latest cf-root and then the Rom from ext.sd via cwm
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hey. It would be really nice if you could give me step wise instructions or give me a link that could guide me. I don't want to risk it . Thanx
Sent from my GT-I9003 using xda app-developers app
I have there a Problem.i'm from germany
Sent from my GT-I9003 using xda app-developers app
Hi Herr US something
Note: XXKPQ can only be flashed with help from it's supporting predecessor XXKPE like the XXKPN/XXKPH/XXKPM series, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot.
Note: For those of you receiving WiFi drop issues, Assign a static IP using
Static IP [Download Here], hit the advanced tab and let it auto configure. Credit to [thatguyonfacebookiforgot]
1. Firstly, Download the 2.3.6 firmware from Przekret's thread
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPQ
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPQ_I9003XXKPQ_I9003SERKPQ_HOME.tar.md5 as PDA
16. Click on Start to flash XXKPQ PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPQ
18. Factory reset and enjoy
Note: XXKPN can only be flashed with help from it's supporting predecessor XXKPE like the XXKPH/XXKPM series, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot. This firmware is to fix the issues that pertained and caused some WiFi issues for other's
1. Firstly, Download the 2.3.5 firmware from Przekret's thread
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPN
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPN_I9003XXKPN_I9003SERKPN_HOME.tar.md5 as PDA
16. Click on Start to flash XXKPN PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPN
18. Factory reset and enjoy
Note: XXKPM can only be flashed with help from it's supporting predecessor XXKPE like the XXKPH series, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot.
1. Firstly, Download the 2.3.5 firmware from Przekret's thread
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPM
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPM_I9003XXKPM_I9003SERKPM_HOME.tar.md5 as PDA
16. Click on Start to flash XXKPM PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPM
18. Factory reset and enjoy
From Custom ROM's [Must be GINGERBREAD, Not Froyo, I am not responsible if your phone ends in a bootloop from ignorance]:
1. Just flash I9003XXKPM_I9003XXKPM_I9003SERKPM_HOME.tar.md5 in PDA as usual.
2. The phone will end up in a bootloop due to ext4 conversion, Proceed to step 3.
3. Flash Skin's CFRoot in respective PDA.
4. Boot into Custom Recovery via 3 Button Combo.
5. Select option's Wipe Cache and Factory Reset
6. Voila, Enjoy your new easy flashable method.
Note: XXKPH can only be flashed with help from it's supporting predecessor XXKPE, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot.
1. Firstly, Download the link from spacebar's XXKPH Feedback thread.
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPH
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar as PDA
16. Click on Start to flash XXKPH PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPH
18. Factory reset and enjoy
1. Firstly, Download the link from Krazzy's stock firmware thread.
2. Run Odin3 v1.83
3. Check Re-Partition, Auto Reboot and F. Reset Time.
4. Click PIT button and select this file: latona_20110114.pit
5. Set it to download mode : Press Volume down + OK first, then hold Power button.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir]
9. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
11. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
13: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!]
14. Click Start button to flash these files to phone.
15. Do not touch anything till you see PASS on the program window.
16. Factory reset
17. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
1. Make all your backups using TB. Don't forget to move the TB folder to Ext_SD or PC after backing up.
2. Factory reset phone using manual code. (*2767*3855#)
3. Get into recovery mode and wipe all.
4. Now flash the new ROM as usual (latona and then the remaining 4 files.) Be sure not to make any lame errors here.
5. Factory reset again using manual code.
6. Now check to see if the power button functions and the phone reboots when you ask so. (It should work.)
7. Check camera. If you have a black screen, its okay.
8. Factory reset again using manual code.
9. Redo flash procedure again.
10. Factory reset again.
11. Check power button issue and camera. Both should be totally fine.
12. Press power button to lock and leave device for 10 mins. Now, press power button to check if the device wakes up as normal. It should. If you want to avoid the device being woken up by calls or texts or other notifications, just put it into flight mode and turn off Wi-Fi.
13. Root using SuperOneClick. It will show up Kernel Panic error in the end, but its no problem.
14. Just pull battery after that and restart phone. You should see SuperUser installed and working. Upgrade Busybox to 1.18.4 by Stericson.
15. Now install TB and go about your restoring business. DO NOT restore any system apps. Just restore User Apps and data.
16. If you didn't **** up any of the above, you should be up and running 2.3.4 without any issues (yet!).
thanks to spacebar2011 for his version.
1. Firstly, Download the link from Krazzy's stock firmware thread. [Apprently it's been proven recently its 2.3.4 GingerBread and not 2.3.3 ] [Link Below]
2. Run Odin3 v1.83
3. Check Re-Partition, Auto Reboot and F. Reset Time.
4. Click PIT button and select this file: latona_20110114.pit
5. Set it to download mode : Press Volume down + OK first, then hold Power button.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir]
9. Click PDA button and select this file: CODE_I9003XXKP7_CL280937_REV08_eng_mid_ship.tar
10. Click PHONE button and select this file: MODEM_I9003XXKP7_REV_00_CL1021949.tar
11. Click BOOTLOADER button and select this file: APBOOT_I9003XXKP7_CL280937_REV08_eng_mid_ship
12. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKP7.tar
13: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!]
14. Click Start button to flash these files to phone.
15. Do not touch anything till you see PASS on the program window.
16. Factory reset
Note: At this point tested and discussed with many users, Update at your own risk, Help will be provided considering it doesn't go off topic.
Also take note, This is a DEV RELEASE, Its bearable. But worth to kill your curiosity over.
KPE Feedback Thread credits go to ephraim
KP9 Feedback Thread credits go to rb210
Falex FAQ on EVERYTHING you need to know about your phone.
DOWNLOAD THE FIRMWARES FROM THIS THREAD : http://forum.xda-developers.com/showthread.php?p=12310841#post12310841
Credit to Krazy for his time and effort in updating the thread. And to everyone in the Gingerbread I9003 Feedback thread.
Notes: I have removed the findings as I have already linked the Feedback threads for the respective firmwares, Please read the feedback to know the problems for the respective GB firmwares.
3:36 Decided to give the thread a whole clean new look 
4:20 Added falex FAQ to feedback.
-----------
3:43 Added XXKPH Guide Updated.
------------
7:53 Oct 20, Added XXKPM Guide.
Note : When I have time to download the other azn version's I will write up a guide. Kindly post the firmware ID for which firmware you need a guide.
Sent from my GT-I9003 using xda app-developers app
Hey can u give me files for xxkpm that you've selected in pda that code_xx
And selected in phone
Sent from my GT-S5570 using xda premium
Hii guyz here is the collection of some of the original roms of Samsung Galaxy S i9003 and if you want to check your firmware version then just type *#1234# in the dialpad
FROYO :
1.I9003XXJL9 - http://www.fileserve.com/file/jf7HvgM/I9003_XXJL9.rar
2.I9003ZCKA6 - http://hotfile.com/dl/99699364/58a8b10/I9003ZCKA6.rar.html
3.I9003XXKA7 - http://hotfile.com/dl/104906620/d07f91d/I9003_XXKA7.rar.html
4.I9003XXKA8 - http://hotfile.com/dl/100569734/423c587/I9003XXKA8.rar.html
5.I9003XXKA9 - http://hotfile.com/dl/104942852/338402d/I9003_XXKA9.rar.html
6.I9003XXKB1 - http://hotfile.com/dl/104985993/f064b46/I9003_XXKB1.rar.html
7.I9003XXKB1-CSC-DBTKB2 - http://hotfile.com/dl/108472094/caf22ab/I9003_XXKB1-CSC-DBTKB2.rar.html
8.I9003XEKB1- http://hotfile.com/dl/103455459/5de363e/I9003XEKB1.rar.html
9.I9003XXKB3 : http://hotfile.com/dl/109632538/8b50540/I9003XXKB3.rar.html
10.I9003DXKB2 : http://hotfile.com/dl/112533344/d0ffba9/I9003DXKB2.rar.html
11. I9003ZTKC1_ZZTKC1 : http://hotfile.com/dl/114690468/e631c21/I9003ZTKC1_ZZTKC1.rar.html
12. I9003JPKD1 : http://hotfile.com/dl/115297948/cd1ebc2/I9003JPKD1.rar.html
13. I9003DDKB2 : http://hotfile.com/dl/118886369/41e2d28/I9003DDKB2_ODDKA6_DDKA5.rar.html
14. I9003ZCKC1: http://hotfile.com/dl/115955648/5e2fbcb/I9003ZCKC1.rar.html
15. I9003JBKE1 : http://hotfile.com/dl/120663910/f3ff0d9/I9003JPKE1_OJPKC2_JXKA4.rar.html
16. I900XXKC1 (EUROPEAN) :http://narod.ru/disk/14574272001/I9003.ZIP.html
17. I9003DXKE1 : http://hotfile.com/dl/121540531/c22acf2/I9003DXKE1_OLBKB2_DXKB2.rar.html
18. I9003ZCKE1 : http://hotfile.com/dl/121547281/fcf48e9/I9003ZCKE1_OZH1009173_ZCKE1.rar.html
19. I9003XEKE1 : http://hotfile.com/dl/121542297/63b4dc5/I9003XEKE1_UCLKE4_XXKB1.rar.html
20. I9003DXKF1 : http://hotfile.com/dl/125254491/fc97d74/I9003DXKF1.rar.html
LATEST firmware : I9003DXKf1 (ASIAN) : http://hotfile.com/dl/125254491/fc97d74/I9003DXKF1.rar.html
GINGERBREAD 2.3.4 , 2.3.5 AND 2.3.6
1. I9003XXKP7
Download: http://hotfile.com/dl/145770427/e513390/I9003XXKP7.zip.html
WARNING: DEV/BETA/TEST VERSION | NOT AN OFFICIAL RELEASED SAMSUNG STOCK ROM!
BUGS: YES, id est: SOD, KP, etc.
KIES: NO.
KIES FW INFORMATION: Unknown.
Password: samfirmware.com
2. I9003XXKP9(Android 2.3.4 Build date : Tue Jun 21 22:40:06 KST 2011)
Download: http://hotfile.com/dl/145770782/0762ef0/I9003XXKP9.zip.html
Password: samfirmware.com
WARNING: DEV VERSION | NOT AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: YES, less bugs compared with XXKP7
KIES:YES.
KIES FW INFORMATION: "This version of the device cannot be updated.", unless "maybe" you're from Korea.
For Discussion, proceed here: http://forum.xda-developers.com/showthread.php?t=1148158L]
THANX TO Sine. FOR MIRRORS!
3. I9003XXKPE
Download: http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
Password: samfirmware.com
WARNING: DEV VERSION | NOT AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO, More Stable than XXKP9
KIES:YES
Mirrors: Multiupload
THANX TO JAMSOORI FOR MIRROR!
4. I9003XXKPH
Download: http://hotfile.com/dl/145784146/61cb31c/I9003XXKPH_I9003XXKPH_I9003SERKPH.zip.html
Password: samfirmware.com
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO, More Stable than XXKPE
KIES:YES
MIRROR : http://leechfactory.com/9xq0eg11b48g/I9003XXKPH_I9003XXKPH_I9003SERKPH.rar.html
MIRROR : http://oron.com/9nbe4mx50e7u/I9003XXKPH_I9003XXKPH_I9003SERKPH.rar.html
Thanks to Aaditya for the resumable dl link, mjbri0613 & Sine for the mirrors.
5. I9003JPKP5
Download : http://hotfile.com/dl/128277760/323a3f0/I9003JPKP5.rar.html
Password: samfirmware.com
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
MIRROR: http://www.mediafire.com/?swsk4j35zejt1ck
MIRROR : http://www.4shared.com/file/KnWnCI9B/I9003JPKP5.html
6. I9003XXKPM (2.3.5)
Download : http://hotfile.com/dl/132666832/c6474bf/GT-I9003_SER_I9003XXKPM_I9003XXKPM_I9003SERKPM.rar.html
Password: sampro.pl
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
6. I9003ZCKP5 (2.3.5)
Download : http://www.multiupload.com/RA1MNES66N
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
THANKS TO HKF2005HK
7. I9003XXKPN (2.3.5)
Download :http://hotfile.com/dl/145831953/e230a2a/I9003XXKPN_I9003SERKPN_SER.zip.html
Pass: sampro.pl
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
THANKS TO PRZEKRET
8. I9003DXKP9 (2.3.5)
Download : http://www.multiupload.com/1PQLH31F3L (THANKS TO SINE)
Pass: sampro.pl
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
9. I9003ZCKP9 (2.3.5)
Download : http://www.multiupload.com/QZNQWL253S (THANKS TO SINE)
Pass: sampro.pl
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
10. I9003POKP3 (2.3.5)
Download : http://www.multiupload.com/GUDBUFR46U (THANKS TO SINE)
Pass: sampro.pl
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
11. I9003XWKPG (2.3.5)
Download : http://www.multiupload.com/90HCRDPADU (THANKS TO SINE)
Pass: sampro.pl
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
12. I9003XXKPQ (2.3.6)
Download : http://hotfile.com/dl/145857619/824249e/I9003XXKPQ_I9003SERKPQ_SER.zip.html (THANKS TO SINE)
Pass: sampro.pl
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
13. I9003UBKPD (2.3.6)
Download : http://www.megaupload.com/?d=L9SKRMSS(THANKS TO Uan_ar)
Password: grupoandroid.com
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
14. I9003XXKPU (2.3.6)
Download:http//www.hotfile.com/dl/148016499/9f88f11/I9003XXKPU_I9003SERKPU_SER.zip.html
Password: samfirmware.com or sampro.pl
VERSION : AN OFFICIAL SAMSUNG RELEASED STOCK ROM!
BUGS: NO.
KIES:YES
15. I9003XWLF2 (2.3.6)
Download: https://hotfile.com/dl/161664001/2936958/GT-I9003_XEO_I9003XWLF2_I9003OXXLF1_I9003XXLE4.zip.html
Password: samfirmware.com or sampro.pl
VERSION : VALUE PACK
BUGS: NO.
KIES:YES
16. I9003DDLF2 (2.3.6)
Download: http://www.hotfile.com/dl/161660941/8fd61ef/I9003DDLF2_I9003ODDLF2_INU.zip.html
Password: samfirmware.com or sampro.pl
VERSION : VALUE PACK
BUGS: NO.
KIES:YES
FEEDBACK THREAD : http://forum.xda-developers.com/showthread.php?t=1222288
WILL UPDATE THIS THREAD REGULARLY
PRESS THE THANKU BUTTON IF YOU LIKE MY POST
All thanks to krazy for his work
Sent from my GT-I9003 using xda app-developers app
ollivong pls give credits to kkrraazzy for its his work, you merely copied and pasted.
Sent from my GT-I9003 using xda app-developers app
I'm sorry when i did something wrong. I'm new Herr.what do you mean with credits?
Sent from my GT-I9003 using xda app-developers app
@oliver i would try it out and let you know the result! i would go for kpq!
ollivong said:
I'm sorry when i did something wrong. I'm new Herr.what do you mean with credits?
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
He meant rather than copy paste the whole post by kkrraazzyy, you should have just posted a link to his thread.
Or atleast, you should have mentioned where did you get this info from.
That is how open-source works. :angel:
Hetalk said:
He meant rather than copy paste the whole post by kkrraazzyy, you should have just posted a link to his thread.
Or atleast, you should have mentioned where did you get this info from.
That is how open-source works. :angel:
Click to expand...
Click to collapse
Yup @ollivong. Don't worry abt it though . We're nice people as long as you are polite.
Sent from my GT-I9003 using xda app-developers app
bscraze said:
Don't worry abt it though . We're nice people as long as you are polite.
Click to expand...
Click to collapse
Thanks men. With The xda-app isn't it so easy to learn but i will learn it
Sent from my GT-I9003 using xda app-developers app
ollivong said:
Thanks men. With The xda-app isn't it so easy to learn but i will learn it
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hey i tried your method of installin kpq. But the problem still exists though the frequency of black screen has decreased.
Sent from my GT-I9003 using xda app-developers app
i have a small douts on my mobile
hey im using galaxy sl(i9003xwkpg) i have rooted with this software 'unlockroot' and in rom manager i trying to install cwm means its asking to select model no, its showing only two model nos that is samsung i9000 and samsung 4gepic but my model no is nt showing(i9003)
how can i install cwm pls help me
navinash.avi said:
hey im using galaxy sl(i9003xwkpg) i have rooted with this software 'unlockroot' and in rom manager i trying to install cwm means its asking to select model no, its showing only two model nos that is samsung i9000 and samsung 4gepic but my model no is nt showing(i9003)
how can i install cwm pls help me
Click to expand...
Click to collapse
Use universal cfroot. U get root & cwm in 1 pack.
Find it at development threat.
Sent from my GT-I9003 using Tapatalk 2
chongns said:
Use universal cfroot. U get root & cwm in 1 pack.
Find it at development threat.
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
i have to again un root n i should use universal cfroot na and if in any resaons i get again unroot from universial cfroot
Buddy the easiest way i found is , flash it with a exixting and working CFRoot or any other Kernal compatable with your rom , that should correct it , or do a Titanium backup and Flash the firmware again ..
Hit Thanks If It Helped
I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
And for mod, please make sticky for this thread, so for Samsung owner can easily find it
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For smarphone : hold power button+menu button+volume down (vol -)
- For tablet : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
Credit goes to
@nasheich (For the tutorials)
@daerragh (For Usb Driver and Odin)
Thanks for ur reply, but in my case,device can't go into download mode,it only go in cwm recovery mode with all effort,
So what to do now?
zeeshantayyab said:
Thanks for ur reply, but in my case,device can't go into download mode,it only go in cwm recovery mode with all effort,
So what to do now?
Click to expand...
Click to collapse
if you can't go to the download mode, you should find other custom rom fir your device and flash it through recovery,
make sure it's custom recovery, not Recovery that came from the device(Samsung)
Samsung firmware sites has been fixed
stuck with the error plzz help flashed stock with odin but remains at setup connection
screenshot
It happened with me sometime back; I tried download mode & it worked. However, recovery mode Home & Power buttons is not accesible.
Take out battery. Re-insert it & "cafefully" press & hold Volume down & Home & Power buttons together & u will enter download mode(yellow triangle). Flash the firmware as usual & see if it works.
not working with one package file it remain at setup connection
1st goto download mode & flash via Odin. U still HAVE download mode. Download mode doesn't vanish in such a case.
This screen in the pic appears when u access download mode & without proper flashing, trying to switch on the phone again. So it shows that symbol.
Do as what I said in the post above.
while using odin
after some process
it get stuck on setup connection
Sanjay(SUN) said:
while using odin
after some process
it get stuck on setup connection
Click to expand...
Click to collapse
Have u made it to download mode or not yet?
done
Which firmware r u flashing? Use Odin v4.42 & filename of ops file should be exactly as BENI_v1.0.ops
I guess u need a froyo(4pkg) firmware.
I tried searching for nearly an hour but couldn't find.
Found the package file
Plz tell me the procedure to flash
Strictly follow the steps mentioned below:
Remember: Don't ever use firmwares made for GT-S5670i/GT-S5670L...etc. on devices like GT-S5670 (no appended alphabet here), coz it will brick ur phone.
First of all,
* Install samsung mobile driver on pc.
* Uninstall Kies(if installed); In some cases, it's also required to disable antivirus/firewall,...etc.(I don't know why).
* Preferably use laptop(for power backup & also it has good usb ports) with XP/Windows7(not Windows8)
* Goto "download mode" in the phone. Then connect it to pc.
* Open Odin v4.42.exe as administrator & you'll see "COM PORT MAPPING" box turned yellow(indicating that you've connected the phone to pc).
Please note that as soon as u select OPS file in the OPS field of Odin, the Odin straightaway displays the device model number in its title bar, regardless of whether ur phone is physically connected to pc or not.
Now set the files(according to which firmware u have) as follows:
For firmware containing 4 files(Note the beginning filenames)
OPS: BENI_v1.0.ops
BOOT: APBOOT_S5670.....
PHONE: MODEM_S5670.....
PDA: CODE_S5670.....
CSC: CSC_5670.....
Click "Start" & wait till Odin says "PASS". Don't touch ur phone during the process. Ur phone will reboot during the process & that's perfectly normal.
OR for firmware containing one file(Note the beginning filename)
Tick "One Package" field(below com port).
Now set the files as follows:
OPS: BENI_v1.0.ops
One Package: S5670...._HOME.tar.md5
Click "Start" & wait till Odin says "PASS". Don't touch ur phone during the process. Ur phone will reboot during the process & that's perfectly normal.
* Now ur firmware would have been flashed successfully. If ur phone bootloops(showing bootanimation again'n'again) then goto RECOVERY MODE(Press & hold Home+Power keys) & select "wipe data/factory reset" & "wipe cache partition"(Use "Volume up/down" to navigate up/down & "Home button" to select & "Power button" to go back to previous menu). Then select "reboot system now".
*DONE!!
Ur phone would be 100% alright now.
Please follow the sequence exactly as mentioned. U will not find any other way than this one. Although Screenshots are messy...I'm on mobile rite now
Hope this helps...!!
Using window xp but while running through administrater it ask for password but I have never done something like that
Sent from my A13-MID using XDA Premium 4 mobile app
Enter ur login password :- The password that u use when the pc is turned/powered ON.
& if u don't know of such thing then ask it from the system administrator.
Can u plzzz tell me the procedure
Sent from my A13-MID using XDA Premium 4 mobile app
I guess u don't know. So, only thing u can do(if u use others' pc/laptop) is kindly request them to allow u admin rights. Tell them ur phone's life is hanging in the balance & only they can save it.
Btw procedure is simple...U just need to enter admin username(if asked) & password in the "Open As Admin" dialog box of Odin.:thumbup:
And if u have ur own pc then u shouldn't have faced this problem.
my big bro have an laptop and when it boot it doesnot need password but while using run as adminstrator it is asking for a password
the only need is to make this phone a portable router i am having 2 pices of fit
Good GA3 (Galaxy Ace 3) follower ! As I put in my post of Stock Kernel , I'm doing little things in Ace 3 Development. Today I bring you something else: Stock Recovery .
It is the recovery mode (vol up + home + power) that comes by default . With it, you can not install tweaks , mods or ROMs , only minor official updates from Samsung. Therefore, only serves to make factory resets, wipe cache and little else.
NOTES:
- It do not delete data from the mobile
- You need Odin
Instructions:
- Download Stock Recovery: http://www.mediafire.com/download/4e...k+Recovery.tar
- Open Odin v3.07
- Put the phone in download mode ( Vol down + Home + Power) , Volume Up to accept and connect it to your computer
- If you have connected successfully, one of the boxes ID : COM turns yellow or blue with the number of COM port. This step may take a few minutes, but usually takes a few seconds.
- Place the tar file ( Recovery) in the PDA box
.
- Check on the boxes ODIN " automatic restart " options F. Reset Time " are checked.
- Click on START in ODIN and wait for it to finish , it takes a few minutes.
- When the process is finished , the phone will reboot , and READY .
Enjoy the Stock Recovery!
PS: do not post elsewhere without giving credits or asking permission
Awsome work dude:good: it really helped me a lot:highfive: