stuck with the error plzz help flashed stock with odin but remains at setup connection
screenshot
It happened with me sometime back; I tried download mode & it worked. However, recovery mode Home & Power buttons is not accesible.
Take out battery. Re-insert it & "cafefully" press & hold Volume down & Home & Power buttons together & u will enter download mode(yellow triangle). Flash the firmware as usual & see if it works.
not working with one package file it remain at setup connection
1st goto download mode & flash via Odin. U still HAVE download mode. Download mode doesn't vanish in such a case.
This screen in the pic appears when u access download mode & without proper flashing, trying to switch on the phone again. So it shows that symbol.
Do as what I said in the post above.
while using odin
after some process
it get stuck on setup connection
Sanjay(SUN) said:
while using odin
after some process
it get stuck on setup connection
Click to expand...
Click to collapse
Have u made it to download mode or not yet?
done
Which firmware r u flashing? Use Odin v4.42 & filename of ops file should be exactly as BENI_v1.0.ops
I guess u need a froyo(4pkg) firmware.
I tried searching for nearly an hour but couldn't find.
Found the package file
Plz tell me the procedure to flash
Strictly follow the steps mentioned below:
Remember: Don't ever use firmwares made for GT-S5670i/GT-S5670L...etc. on devices like GT-S5670 (no appended alphabet here), coz it will brick ur phone.
First of all,
* Install samsung mobile driver on pc.
* Uninstall Kies(if installed); In some cases, it's also required to disable antivirus/firewall,...etc.(I don't know why).
* Preferably use laptop(for power backup & also it has good usb ports) with XP/Windows7(not Windows8)
* Goto "download mode" in the phone. Then connect it to pc.
* Open Odin v4.42.exe as administrator & you'll see "COM PORT MAPPING" box turned yellow(indicating that you've connected the phone to pc).
Please note that as soon as u select OPS file in the OPS field of Odin, the Odin straightaway displays the device model number in its title bar, regardless of whether ur phone is physically connected to pc or not.
Now set the files(according to which firmware u have) as follows:
For firmware containing 4 files(Note the beginning filenames)
OPS: BENI_v1.0.ops
BOOT: APBOOT_S5670.....
PHONE: MODEM_S5670.....
PDA: CODE_S5670.....
CSC: CSC_5670.....
Click "Start" & wait till Odin says "PASS". Don't touch ur phone during the process. Ur phone will reboot during the process & that's perfectly normal.
OR for firmware containing one file(Note the beginning filename)
Tick "One Package" field(below com port).
Now set the files as follows:
OPS: BENI_v1.0.ops
One Package: S5670...._HOME.tar.md5
Click "Start" & wait till Odin says "PASS". Don't touch ur phone during the process. Ur phone will reboot during the process & that's perfectly normal.
* Now ur firmware would have been flashed successfully. If ur phone bootloops(showing bootanimation again'n'again) then goto RECOVERY MODE(Press & hold Home+Power keys) & select "wipe data/factory reset" & "wipe cache partition"(Use "Volume up/down" to navigate up/down & "Home button" to select & "Power button" to go back to previous menu). Then select "reboot system now".
*DONE!!
Ur phone would be 100% alright now.
Please follow the sequence exactly as mentioned. U will not find any other way than this one. Although Screenshots are messy...I'm on mobile rite now
Hope this helps...!!
Using window xp but while running through administrater it ask for password but I have never done something like that
Sent from my A13-MID using XDA Premium 4 mobile app
Enter ur login password :- The password that u use when the pc is turned/powered ON.
& if u don't know of such thing then ask it from the system administrator.
Can u plzzz tell me the procedure
Sent from my A13-MID using XDA Premium 4 mobile app
I guess u don't know. So, only thing u can do(if u use others' pc/laptop) is kindly request them to allow u admin rights. Tell them ur phone's life is hanging in the balance & only they can save it.
Btw procedure is simple...U just need to enter admin username(if asked) & password in the "Open As Admin" dialog box of Odin.:thumbup:
And if u have ur own pc then u shouldn't have faced this problem.
my big bro have an laptop and when it boot it doesnot need password but while using run as adminstrator it is asking for a password
the only need is to make this phone a portable router i am having 2 pices of fit
Related
Samsung Galaxy Fit is one of the most famous device which is known because of it’s affordability and great price. Galaxy Fit users can now enjoy Rooting the device, and due course of this article we will tell you how you can install Custom Recovery on your device after Rooting it..
Warning for Beginners:
Note: This is an rooting and installing process for the mobile phone named Galaxy Fit S5670 and has to be applied to the Mobile phone using the Recovery Mode in the mobile phone. The steps which are included in this guide are very risky and can even brick off your mobile phone. Unless you are aware with Custom ROMS, Firmwares and ODIN, don’t even try these things on your mobile phone..
Pre-Requisites to Root and Install Custom Recovery on your Samsung Galaxy Fit
The instructions are working for Samsung Galaxy Fit, S5670 Originally manufactured.
Backup all of your SMS Messages using SMS Backup Application.
Sync all of your Contacts with the Gmail Application.
Copy all of your notes manually to somewhere else, as if in case your mobile phone gets bricked these notes will be deleted from the mobile phone.
Take a backup of call logs, APN Settings, and other important things.
Charge your mobile phone so that it would be having more than 60% battery.
Now, enable USB Debugging Mode in your mobile phone (Settings > Applications >Development > USB Debugging).
Samsung Device drivers installed in your computer.
Follow all steps carefully in order to get 100% assured success.
How To Root and Install Custom Recovery on your Samsung Galaxy Fit
Note: We have written each and every step clearly in order to make the rooting process successful but if any wrong step is taken then Neither me nor thedroidnation.com will be held responsible in case your device gets bricked.
Download Odin, Rooting File and the OPS File from the links to your computer and move them to a new folder in order to prevent any confusions.
Turn off your mobile phone and bring the mobile phone to download mode (hold the Volume Down button + Home Key + Power Button and the device will start itself).
Now, Shoot up the ODIN executable file.
Click on the OPS Tab in the ODIN window and select the “BENI_v1.0.ops” file after that tick the “One Package” option and select the file “beni_cwm-5_ext4_v2“.
Connect your mobile phone to the computer, and wait for the device drivers to get installed. After the installation of drivers is complete then the ID:COM section in the ODIN downloader window will turn yellow.
Wait for some time, and as soon as the installation is complete the phone will reboot itself. Now, you can remove the USB cable.
Now, You can access recovery mode on your mobile phone by holding Volume Up + Home Button + Power Key and the device will start itself.
Now, select “Wipe data/factory reset” & “Wipe Cache partition” one-by-one and the device caches will be cleared off. After this select “Wipe dalvik cache“.
Congratulations!! You’ve successfully installed Custom Recovery in your Samsung Galaxy Fit...
Press Thanks button If I help U in any manner...
Source
http://thedroidnation.com/samsung/g...s5670-root-install-custom-recovery-image.html
Aspire said:
Source
http://thedroidnation.com/samsung/g...s5670-root-install-custom-recovery-image.html
Click to expand...
Click to collapse
Thankss for d souce..
copied
samo_gf said:
copied
Click to expand...
Click to collapse
Everything he puts on this portal is a copied.
Universal Gingerbread Root & Unroot 2.3.3 -> 2.3.7+
If somebody want to ROOT and UNROOT on Gingerbread you can follow me here: GT-S5670, GT-S5670B, GT-S5670L
I get stuck at RAMDUMP Mode (ARM9 mode) D:
Did i do something wrong? (when accessing the recovery)
Hello!
This process works on GT-S5670B?
Thank you! =D
Alternative Way Of Rooting Your Mobile
1.Download The update.zip from this link
2.Put In the sdcard.
3.Boot In the recovery menu by pressing "home + power" button.
4. select "apply update.zip" from the menu.
5.wait 2-5 seconds to take the effect
6. Now select "reboot system".
4.Thats It.... You've Rooted Your Phone And have Got The SuperUser Access!!
Thank You!!
Thanks a lot!!!
asen121 said:
1.Download The update.zip from this link
2.Put In the sdcard.
3.Boot In the recovery menu by pressing "home + power" button.
4. select "apply update.zip" from the menu.
5.wait 2-5 seconds to take the effect
6. Now select "reboot system".
4.Thats It.... You've Rooted Your Phone And have Got The SuperUser Access!!
Thank You!!
Click to expand...
Click to collapse
this is the best method ive ever seen to root a device
easy and safe...it can b done eyes closed!!!
asen121 said:
1.Download The update.zip from this link
2.Put In the sdcard.
3.Boot In the recovery menu by pressing "home + power" button.
4. select "apply update.zip" from the menu.
5.wait 2-5 seconds to take the effect
6. Now select "reboot system".
4.Thats It.... You've Rooted Your Phone And have Got The SuperUser Access!!
Thank You!!
Click to expand...
Click to collapse
is it for gingerbread 2.3.4version?? and if not will it work for that version..??
adyt5 said:
is it for gingerbread 2.3.4version?? and if not will it work for that version..??
Click to expand...
Click to collapse
yup!
it works!
Use Root Genius or srs root...
pre Requisites:
- All the data present in your Galaxy FIT needs to be backed up ONLY by following the below mentioned steps so as to ensure that just in case if the data gets lost or corrupted.
- Charge left in the device should be minimum 60% so as to make sure that the phone doesn’t get turned Off in the middle of firmware update. Enable the USB Debugging in your device from the path “Settings > Applications > Development > USB debugging”
So,assuming that you have followed all the instructions mentioned above you now need to proceed further for procedure.
Procedure to Update
- Download Gingerbread 2.3.6 Package & odin-beni-ss.dll for Fit.zip in your computer after which you need to extract the same.If Promted For Password then You Should Enter Password as “sampro.pl”.
For 2.3.6 Update Package- http://hotfile.com/dl/140199372/0b98375/GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1.rar.html
- Match the extracted files from the below shown screen capture, even if single file is missing then you need to check with the extraction or download process.
- From extracted files, open Odin executable file and turn Off the phone so as to enter the device in the download mode.
- Now, you need to enter the by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. Just in case if the device boots in the normal mode then you will have to again try the process of entering into the download mode
- After entering the phone in the download mode, connect the device to the computer while keeping the Odin opened. Within a minute, the ID : COM section will turn yellow which will mean that all the drivers have been successfully installed and you are now ready to proceed to the next step.
- Click on the “OPS” option in the Odin to select the below mentioned file, tick on “One Package” option and then select the One Package option as mentioned below.
OPS – BENI_v1.0.ops
One Package – S5670DDKT1_S5670ODDKT1_S5670DDKT1_HOME.tar.md5
- Click on Start and then wait for the device to get restarted. Once the device gets restarted, you will be asked to enter the Google Account credentials. Once you see the home screen in your phone, disconnect the connected phone.
Congratulations!!! You have successfully update ur android with 2.3.6 Gingerbread Firmware
_______________________________________________________________
Press THANKS button If I help U in any manner
Hi!
Does this firmware includes greek language?Thanks!
may be no...
Because DD is for india:thumbup:
Sent from my GT-S5670 using xda app-developers app
Do you know where i can find or what is the name for the firmware to search?Also i have a greek galaxy fit with 2.3.6,do you know how to make a full backupo of this firmware?Thanks!
i guess everyone knows this
zafisinl said:
Do you know where i can find or what is the name for the firmware to search?Also i have a greek galaxy fit with 2.3.6,do you know how to make a full backupo of this firmware?Thanks!
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/
In search write s5670.
password
what is the password for this file????
It's witten over there on sammobile
Sent Via XDA™ Premium
Password
rajmi said:
what is the password for this file????
Click to expand...
Click to collapse
Read the first post carefully
Pasword : sampro.pl
The rar file just has the md5 file, where can I find the other files? I tried manually downloading the files from different locations but it just sits at downloading mibib and doesn't do anything. The flashing process just sits at downloading MIBIB and doesn't go anywhere, I have tried waiting for as long as 30mins, now the mobile doesn't even start with the previous firmware. When started it shows an icon like connection problem between a computer and mobile right after the initial samsung logo and sits there.Please help
zafisinl said:
Hi!
Does this firmware includes greek language?Thanks!
Click to expand...
Click to collapse
Most probably it does.I flashed mine with a stock russian rom.the phone started in russian but you can easily navigate through the icons to settings and change the language.I turned it to greek
In this tutorial, i will show you how can you recover you phone and get the stock firmware..
Requirements:-
1) Odin3 v1.85 (check below for attached one).
2) Latest/Any S7562 flash file.
3) PC running Windows XP SP2/SP3, Windows 7/Vista SP1/SP2 or Windows 8
4) A Samsung Certified Data Cable (Usually found in the phone box)
5) Samsung Galaxy S Duos with Battery at least 40% charged:laugh:
Procedure:-
1) Download Odin (Check Below)
2) Download the latest flash file, Just search S7562 Firmware in Google
3) Extract the Odin3 v1.85.zip file, there you'll find three files.
4) Run Odin3 v1.85.exe
5) Make sure that only "Auto Reboot" and "F. Reset Time" is ticked.
6) Now extract the downloaded flash file, it will have the md5/tar file.
7) Now go back to Odin and click on PDA and locate the md5/tar file stored in your pc.
8) Now you have to boot your phone into Download Mode . Press Volume DOWN + Home + Power Key, wait for the download mode options to come and then press Volume UP key to enter/continue to Download Mode.
9) Connect phone to PC/Laptop and Check Odin It will show COM Port And Now Click on Start in Odin and wait for the task to finish.
10) Disconnect your phone after the Odin shows Pass! ... And you're done.
Things to Note:-
1) Your laptop should be at least 50% Charge to ensure no Power Failure.
2) Do not disconnect the phone while the flashing process is running.
3) Do not use USB HUBs to connect device to Laptop.
4) Perform this only if you want to get the Stock Firmware back, else use Reset option.
Please do ask if you find this difficult to perform. Reply here..
For any Question, post here or message me..!
Sent from my GT-S7582 using XDA Premium 4 mobile app
Reset?
Amosthecoolboy said:
For any Question, post here or message me..!
Sent from my GT-S7582 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay, so does the reset option factory data reset? Like wipe /data? Just curious.
K****ij0211 said:
Okay, so does the reset option factory data reset? Like wipe /data? Just curious.
Click to expand...
Click to collapse
F reset ? Function?
Sent from my GT-S7582 using XDA Premium 4 mobile app
Hey everyone,
I recently was given a Verizon galaxy s3 I want to use it with tmobile. I used these steps
a) Download Samsung Drivers if you do not already have them. It is an Exe file: DOWNLOAD
b) Run what you just downloaded, to install the drivers.
c) Download the ODIN3 Software, this software lets you flash (which means write to the hardware of your computer which is normally not possible) your phone. The file you are downloading is compressed, which means you need to first uncompress it. DOWNLOAD
d) Extract (Uncompress) the folder you just downloaded, and run ODIN3 which will be one of the files inside the folder you just extracted.
NOTE ODIN3 is an Executable File, which means you do not install it, you just click on it to run it.
e) Now we need to download the file VRALEC Bootchain. This file will be used by to allow us to flash (using the ODIN3 software) a customized recovery image on to your phone. DOWNLOAD
NOTE: What an image is, is simply a snap shot of a harddrive, sort to speak. Someone who has advanced knowledge of the Android OS, created a snap shot of their Phone "Harddrive" (firmware) so that others could simply replace their current Android OS, with the customized one.
f) Turn off your phone. HOLD DOWN the Volume Down Key, Home Key, and the POWER down key. As soon as the phone Vibrates release the POWER button only. Once the ODIN Screen comes up, release the other two buttons and hit the Volume UP key.
g) Now connect your phone to your computer using your USB Cable.
h) Now on your computer, bring up ODIN3 and click on PDA, this will bring up a file selector. You want to select the VRALEC Bootchain you just downloaded (VRALEC.bootchain.tar.md5 for example).
WARNING: DO NOT CLICK ANY CHECK-BOXES, YOU WILL DAMAGE YOUR PHONE.
NOTE: After you select the file, the box next to the PDA button should now be populated with the location of the file: C:\Users\yourname\Downloads\VRALEC.bootchain.tar.md5.
i) Now locate the Start button, located below the PDA button.
WARNING: DO NOT UNPLUG YOUR PHONE OR TURN IT OFF DURING THIS PROCESS.
NOTE: Once it is complete, your phone will restart.
j) After your phone restarts, go back to ODIN3 and click the Reset button, it is located right next to the Start button.
k) Unplug your phone and then turn it off, and finally take the back cover off.
l) We need to get back to the ODIN mode. Turn off your phone (if its not off already). Push and hold down the Volume Down Button, Home Button, and the POWER Button. As soon as the phone Vibrates release the Power Button only. Once the ODIN Screen comes up, release the other two buttons and hit the Volume UP Button.
m) Once you are in ODIN Mode connect your phone again to your computer
n) Now you need to download ClockworkMod Touch Recovery 6.0.2.3 (a recover image that you will use to replace your current Android OS with a Unlocked one). DOWNLOAD
o) After you download it, bring up the ODIN3 software again, and this time you want to UNCHECK Auto-Reboot. This is very important, after you uncheck it, the only option that should be CHECKED is the F.Rest Time option.
p) Now click on the Bootloader button and select the Clockwork recovery image we downloaded at step n. (CWM6023TouchVZW.tar.md5 for example)
NOTE: After you select the recovery image, the box next to the should display the location of the; C:\Users\yourname\Downloads\CWM6023TouchVZW.tar.md5
q) Now locate and click the Start button again, located at the bottom of the ODIN3 Panel
WARNING: DO NOT UNPLUG YOUR PHONE OR TURN IT OFF DURING THIS PROCESS.
r) After it has finished running, disconnect your phone, turn it off, and take out the battery. Leave the battery out for at least 20 seconds.
s) We need to now turn on the Phone into Recovery. To get into Recovery mode follow these steps; Turn off your phone (if its not off already). Push and hold down the Volume UP Button, Home Button, and the POWER Key. As soon as the phone Vibrates release the Power Button only.
NOTE Once you see "Recovery Mode..." at the top left of the screen you can let go of the buttons.
t) Once in recover mode, select reboot system now, after you click it, it will ask you if you want to disable recovery flash. YOU MUST SELECT "Yes - Disable recovery flash"
ATTENTION : The following step is very important, you must select Yes - Disable recovery flash
u) We need to now download the Super User Package to grant us Root. DOWNLOAD
NOTE: This package is a compressed zip file. DO NOT UNCOMPRESS THIS FILE, YOU NEED IT TO BE COMPRESSED.
v) Connect your phone back to your computer, and copy the zip file you just downloaded in step u, to your phone's External SD card. (SuperSU_Bootloader_FIXED.zip for example, will be the name of the file that you will copy over)
w) We now need to get into Recovery mode again. To get into Recovery mode follow these steps; Turn off your phone. Push and hold down the Volume UP Button, Home Button, and the POWER Key. As soon as the phone Vibrates release the Power Button only.
NOTE Once you see "Recovery Mode..." at the top left of the screen you can let go of the buttons.
x) Once you are in recovery mode, select "- install zip from sdcard"
y) Then click on "- choose zip from external sdcard"
z) Now find the file you downloaded and copied over. (SuperSU_Bootloader_FIXED.zip for example) and select it.
NOTE: if you can't see the file, you may need to scroll down, to find it.
Sigh... this is a long process.... I am past step z!
z1) Click on "- Yes - Install SuperSU_Bootloader_FIXED.zip"
z2) After its finished, a you will see the menu again. Click on "++++++ Go Back+++++++"
z3) Click on "- reboot system now" your system should now be restarting.
We are not done yet, we now need to add the Tmobile APNs to our phone, however, the phone is set up to prevent you to do this, because of greed, corruption and a broken system.
Here are the original instructions to allow APNs unlocking in its entirety : Full Guide
z4) go to the Play Store, then search for and install BuildProp Editor
z5) Once it is installed, open it up and it will as you to grant the application superuser access, click on "GRANT"
z6) click the phone Menu Button, and when the menu comes up, click on Edit
z7) Scroll all the way to the botton, and add these two lines to it:
ril.sales_code=LOL
ro.csc.sales_code=LOL
z8) After entering the new in the two new lines, click on Save Icon located top right. It will pop up a message near the bottom center that will let you know it was saved.
z9) After you save it, restart your phone.go to
•Settings
•More Settings
•Mobile Networks
•Access Point Names
Here are the original instructions to set up Tmobile APN in its entirety : Full Guide
z10) Click on the phones Menu Button and click on "+ New APN"
z11) Click on Name, set it "T-Mobile" then click OK
z12) Click on APN, and set it to "epc.tmobile.com" then click OK
z13) Click on MMSC and set it to "mms.msg.eng.t-mobile.com/mms/wapenc" then Click OK
z14) Click on the phones Menu Button and click on "Save"
z15) Click on "T-Mobile" and then restart your phone.
THATS IT! We are done... man
to root and unlock the bootloader and shows my phone is rooted but in step t I did not get the "Yes - Disable recovery flash" message. I did continue to the rest of the steps and it shows that my phone is rooted but I still can not stick to tmobiles towers and I keep getting a pop up asking if I want to switch to global. Does not clicking "Yes - Disable recovery flash" make the difference to making it work with tmobile? If so how can I fix this. Also, I still can not send or receive picture messages. I have the Samsung galaxy s3 i535 4.1.2. baseband version i535vrbmf1. I hope someone can help me
Instead of selecting global, try GSM/UTS
Sent from my Last Ever Samsung Device.
0331 said:
Instead of selecting global, try GSM/UTS
Sent from my Last Ever Samsung Device.
Click to expand...
Click to collapse
I have and still nothing. I have also tried to network unlock Via secret menu umts,debug screen,phone control, network lock but after that their is no options. Anyway to manually change the bandbase?
The baseband can be changed by flashing a different modem, I believe. What do you want to change it to?
The messages issue sounds like an APN issue to me.
Sent from my Last Ever Samsung Device.
---------- Post added at 03:51 PM ---------- Previous post was at 03:46 PM ----------
Where did you find the guide that you followed? Can you provide a link?
Sent from my Last Ever Samsung Device.
0331 said:
The baseband can be changed by flashing a different modem, I believe. What do you want to change it to?
The messages issue sounds like an APN issue to me.
Sent from my Last Ever Samsung Device.
---------- Post added at 03:51 PM ---------- Previous post was at 03:46 PM ----------
Where did you find the guide that you followed? Can you provide a link?
Sent from my Last Ever Samsung Device.
Click to expand...
Click to collapse
I was told by tmobile I need to unlock the phone and then change the baseband. I was able to change the apn without any app.
Well i flashed android too many times now and always got lags/bugs/forceclosures/etc. But i started to wonder why, so i watched closely when i needed to flash my device again after firmware froze/broke.
And got really dumbstruck to see that the latest android mods just seemed to flash some kind of script instead of full firmware(at least for my Samsung Galaxy Tab 2 7.0 GT-P3110?). So i did a full cleanup of device and with help of PC using ODIN flashed the latest known LEGAL firmware and redone evry step from beginning to end. So here is steps i used.
1. Download to PC all necesary files for flashing/modding device.
2. CHARGE UR DEVICE FULL POWER AND THEN SET IT TO DOWNLOAD MODE.
3. First flashed the LEGAL Firmware and after reboot let it run so u can set the settings of device (DO NOT STARTUP ANY SERVICES LIKE WIFI/ACCOUNT/USE NAME/ETC BUT SKIP THOSE PARTS) and set date/time correctly.
Then set ur DEVELOPER MODE to active but DONT give it root access.
Now u should have basic core install. Now go back into DOWNLOAD MODE.
4. Using Pc Odin now flash the AUTO-ROOT from chainfire? and let reboot fully till device starts up, check if ROOT app is shown in settings menu and install backup script, then copy/paste ur previously downloaded files/apk's/etc to ur device's EXT-SDCARD. When done set device into DOWNLOAD MODE again.
5. Using PC ODIN flash the FIRST RECOVERY FILE and let device reboot.
6. Well thats the PC PART of this tutorial?, now u can unplug ur data/power cord. Now set ur device to RECOVERY SETTINGS.
7. Now this might sound weird to u but just follow lead?
Select the wipe options and wipe ONLY the DALVIC/ART option, then use settings install from external sd-card to flash the SECOND RECOVERY FILE and restart device into RECOVERY again.
8. Now u should have working RECOVERY?. Now use the additional wipe settings to wipe the first four options called DALVIC, SYSTEM, DATA, CACHE, DO NOT WIPE ANYTHING ELSE. Now RESTART device into RECOVERY mode again, dont worry about popup saying NO OS installed but continue, next popup u REALLY MUST set or u will LOOSE root access. Wait till device has restarted RECOVERY MODE.
9. Now u install ONLY the ROM FILE and then reboot device normally.
After restart let device start-up to set settings and as mentioned in line 3 skip wifi/account/set name/etc and set time/date. check device settings and reset DEVELOPER MODE, hmm lol almost forgot this ? but set device into DOWNLOAD MODE and connect to PC again and using ODIN flash the RECOVERY FILE again so its properly installed. Now reboot into RECOVERY MODE again.
10. Install the GAPPS FILE now then install the supersu update file and reboot device normally again.
11. Wait till device starts up fully and DONT start anything else then the device settings ADD ACCOUNT, u will set the wifi/account/etc in the progress. ALMOST DONE NOW?
12. LAST STEP IS THIS..... RESTART UR DEVICE 1X INTO RECOVERY MODE BF DOING ANYTHING THAT ADDS DATA AND MAKE AN BACKUP OF DEVICE THAT IS SMALL IN SIZE AND CLEAN AS AIR?
After u backed up ur device u reboot into normal mode. After device fully started do an RESTART DEVICE 2x so all data/info/etc is stored properly. Seems device needs 2x restart for any action done that gives a lot of data, like after installing apps/games/apk's it seems to run smoother after done those 2x reboot somehow??? Hope someone can confirm if thats true?. Well now u should have an smooth running device i hope???
An fanatic android user?
Sent from my GT-P3110 using XDA Free mobile app
These files i used for installing android 5.0.
usb file needed
SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.25.0-retail.exe
Odin file needed
Odin v3.10.rar
Legal Firmware file
PHN-P3110XXDNE1-20140519102636.zip
Auto-root file
CF-Auto-Root-espressowifi-espressowifixx-gtp3110.zip
Recovery file nr1
philz_touch_6.57.8-p3110.zip (for enabling install twrp)
Recovery file nr2
GT-P3110_TWRP_2.8.6.0.zip
Root update file
UPDATE-SuperSU-v2.46.zip
well hope thats it, just copy/paste the file name in google search to find the files cuz i aint that good in linking or uploading files yet but ill make an effort using google drive if someone wants me to?
Sent from my GT-P3110 using XDA Free mobile app