Database Info

[Firmware]Odin Firmware Collection for the Samsung Galaxy S4{Latest}

Firm Ware Collection For The Samsung Galaxy S4 {Android 4.2.2} GT-I9500 Only !!!
China :I9500ZCUAMDG_I9500CHNAMDG_CHN.zip
Argentina:I9500UBUAMDE_I9500UWAAMDE_CTI.zip
Russia:I9500XXUAMDK_I9500SERAMDK_SER.zip
Nijeria:I9500XXUAMDE_I9500OJVAMDC_ECT.zip
Pakistan:I9500XXUAMDE_I9500OJVAMDC_PAK.zip
Bengladesh:I9500XXUAMDE_I9500ODDAMDC_TML.zip
Egypt:I9500XXUAMDE_I9500OJVAMDC_EGY.zip
Morocco:I9500XXUAMDE_I9500OJVAMDC_MWD.zip
India:I9500XXUAMDE_I9500ODDAMDC_INU.zip
Saudi Arabia:I9500XXUAMDE_I9500OJVAMDC_KSA.zip
United Arab Emarates:I9500XXUAMDE_I9500OJVAMDC_XSG.zip
Germany:I9500XXUAMDE_I9500MBCAMD6_MBC.zip
Ecadur:I9500UBUAMDE_I9500UWAAMDE_ECO.zip
Iran:I9500XXUAMDE_I9500OJVAMDC_THR.zip
Turkey:I9500XXUAMDE_I9500OJVAMDC_TUR.zip
Kenya:I9500XXUAMDE_I9500OJVAMDC_AFR.zip
Taiwan:I9500ZSUAMDE_I9500OZSAMDE_BRI.zip
​
How to Install :
Go Download ODIN From ChainFire {Special thanks}
Then DownLoad The Firmware.
Unpack And you will get .tar.md5 file and a .dll file.
Then Switch off the phone and put it on the Download Mode. To do this, press Volume Down + Home + Power buttons and then press Volume Up when the warning message appears.
Run Odin v3.07.exe as an Administrator.
Connect Device.
If the phone is connected properly, you will see that the ID: COM section turns Yellow and a message will appear in Odin’s message box saying “Added!!” If not, check whether the USB drivers are installed properly in your computer.
In Odin, click on PDA and select the .tar.md5 file that you have got after extracting the Firmware Package
In the Odin, make sure that Auto Reboot and F. Reset Time checkboxes are selected. If you are using a .pit file, ensure that re-partition checkbox is selected. Otherwise, leave it unchecked.
Click on the Start button in Odin to begin the installation process.
After the installation is complete, the device will restart on its own. Once you get the Samsung logo on the home screen, unplug the device from the computer.
Thnaks For IbtimesFor Giving Me the Leaked Firmwares {Special Thanks To george}
Pleaze Hit The Thanks Button ​

reserved

S.a.M.e.R_d said:
Firm Ware Collection For The Samsung Galaxy S4 {Android 4.2.2} GT-I9500 Only !!!
China :I9500ZCUAMDG_I9500CHNAMDG_CHN.zip
Argentina:I9500UBUAMDE_I9500UWAAMDE_CTI.zip
Russia:I9500XXUAMDK_I9500SERAMDK_SER.zip
Nijeria:I9500XXUAMDE_I9500OJVAMDC_ECT.zip
Pakistan:I9500XXUAMDE_I9500OJVAMDC_PAK.zip
Bengladesh:I9500XXUAMDE_I9500ODDAMDC_TML.zip
Egypt:I9500XXUAMDE_I9500OJVAMDC_EGY.zip
Morocco:I9500XXUAMDE_I9500OJVAMDC_MWD.zip
India:I9500XXUAMDE_I9500ODDAMDC_INU.zip
Saudi Arabia:I9500XXUAMDE_I9500OJVAMDC_KSA.zip
United Arab Emarates:I9500XXUAMDE_I9500OJVAMDC_XSG.zip
Germany:I9500XXUAMDE_I9500MBCAMD6_MBC.zip
Ecadur:I9500UBUAMDE_I9500UWAAMDE_ECO.zip
Iran:I9500XXUAMDE_I9500OJVAMDC_THR.zip
Turkey:I9500XXUAMDE_I9500OJVAMDC_TUR.zip
Kenya:I9500XXUAMDE_I9500OJVAMDC_AFR.zip
Taiwan:I9500ZSUAMDE_I9500OZSAMDE_BRI.zip
​
How to Install :
Go Download ODIN From ChainFire {Special thanks}
Then DownLoad The Firmware.
Unpack And you will get .tar.md5 file and a .dll file.
Then Switch off the phone and put it on the Download Mode. To do this, press Volume Down + Home + Power buttons and then press Volume Up when the warning message appears.
Run Odin v3.07.exe as an Administrator.
Connect Device.
If the phone is connected properly, you will see that the ID: COM section turns Yellow and a message will appear in Odin’s message box saying “Added!!” If not, check whether the USB drivers are installed properly in your computer.
In Odin, click on PDA and select the .tar.md5 file that you have got after extracting the Firmware Package
In the Odin, make sure that Auto Reboot and F. Reset Time checkboxes are selected. If you are using a .pit file, ensure that re-partition checkbox is selected. Otherwise, leave it unchecked.
Click on the Start button in Odin to begin the installation process.
After the installation is complete, the device will restart on its own. Once you get the Samsung logo on the home screen, unplug the device from the computer.
Thnaks For IbtimesFor Giving Me the Leaked Firmwares {Special Thanks To george}
Pleaze Hit The Thanks Button ​
Click to expand...
Click to collapse
Awesome tks
Sent from my GT-I9500 using Tapatalk 2

These are the latest firmware collection

YOU WANT TO JOIN KINGCOBRA TEAM ?
PLEASE FEAL FREE TO FILL THIS APPLICATION
https://docs.google.com/forms/d/1oP7sYBgk6XXgMg_6aqtjHGrgV5ZuwGnlSG3GvUghFAU/viewform

[Guide] [How to] Update Samsung S5282 Galaxy Star Duos Firmware

What is This Guide:
This guide will give you the complete and easy steps to follow when you want to update the firmware version of your Samsung Galaxy Star Duos S5282, The main goal of this guide is to update your Galaxy Star Duos by yourself and by using Free tools and files only, No need to buy or pay for anything at all, We bring you everything you need to perform the update so all you should do is reading the guide and start working.
Important Steps:
- Backup any wanted data before starting the update process, Read our online guide (How to Backup your Samsung Mobile Phone).
- Charge your mobile phone to be at least at 70% of its charging level.
- Write down the current firmware version of your mobile phone, You may need it in case of anything happen during the update process.
Tools, Files and programs:
- Stock official firmware of Samsung S5282 Galaxy Star Duos (Download and extract the package).
- USB drivers for your S5282 ( Download and install it, Then restart the computer).
- Odin flasher (Download and extract).
- Suitable USB cable for Samsung S5282 Galaxy Star Duos.
- A computer with Windows OS installed.
Samsung S5282 Galaxy Star Duos Firmware Update Steps:
- Turn off the phone.
- Take out any SIM cards or memory card of it.
- Run Odin.exe program.
- Check the following settings: Auto Reboot, F.Reset Time, Nand Erase all.
- Click Bootloader button and select: BOOTSPL_S5282xxxxxx_..._REV03_user_low_ship.tar
- Click PDA button and select: CODE_S5282xxxxxx_1127854_REV03_user_low_ship.tar
- Click PHONE button and select: MODEM_S5282xxxxx_REV03.tar
- Click CSC button and select: CSC_Oxx_S5282Oxxxxxx_1127854_REV03_user_low_ship.tar
(In-case you'd like to re-partition, check "re-partition" and select the mint.pit file)
- Put your Samsung S5282 Galaxy Star Duos device into Download Mode:
Press and Hold Volume Down key + Home key + Power key, When you see the warning message release all keys, And press Volume Up key to enter the phone into Download Mode.
- Connect the device to your PC using the USB cable.
- Wait for Windows to install the needed USB drivers.
- Look at Odin's window and check if the COM port of your device is detected (0:[COMxxx]).
- Click on Start button.
- Odin will install the new firmware files into your Galaxy Star Duos, Just wait for it to be done.
- The device will be rebooted after installing the new firmware.
- Look at Odin's window and if you see PASS! Word then the update was successful.
- Disconnect the USB cable from phone.
- Wait for the device to be fully on and check the new firmware version bu this code *#1234#
- Now you can turn the mobile off, Insert SIM Cards, Memory card, Then turn it on again.
- When the device is on again you are free to customize it and restore your backup (In case you have made one), Then enjoy your perfect work.
IMPORTANT​Notice: When you have a firmware package with one file inside, Then no need to check Re-Partition option, And never use PIT file too, All you should do is selecting the one file as PDA file, and perform the other explained steps.

Boot loop occurs
Can you give me the link ???,I goolged always getting.. a sigle flashable file. When i flash with that, always boot loop occurs..
Any advise pls...

subinkoovery said:
Can you give me the link ???,I goolged always getting.. a sigle flashable file. When i flash with that, always boot loop occurs..
Any advise pls...
Click to expand...
Click to collapse
Use single one in pda download from samsung-updates.com
Sent from my Micromax A58 using XDA Free mobile app

Please Help Me
After installing stock rom in galaxy star (GT-S5282) , I got something on my screen showing some details like pda, etc (picture attached with this post). and it is staying forever. Also when i long press power button, it is directly sutting down without showing any menu. screen is not locking.And also showing internal memory as 0. When I try to install any custom rom, device is going into boot loop. PLEASE HELP ME!!!

Yes same here please help my friends wanna need my help

[Q] S3 working with tmobile but need help changing baseband

Hey everyone,
I recently was given a Verizon galaxy s3 I want to use it with tmobile. I used these steps
a) Download Samsung Drivers if you do not already have them. It is an Exe file: DOWNLOAD
b) Run what you just downloaded, to install the drivers.
c) Download the ODIN3 Software, this software lets you flash (which means write to the hardware of your computer which is normally not possible) your phone. The file you are downloading is compressed, which means you need to first uncompress it. DOWNLOAD
d) Extract (Uncompress) the folder you just downloaded, and run ODIN3 which will be one of the files inside the folder you just extracted.
NOTE ODIN3 is an Executable File, which means you do not install it, you just click on it to run it.
e) Now we need to download the file VRALEC Bootchain. This file will be used by to allow us to flash (using the ODIN3 software) a customized recovery image on to your phone. DOWNLOAD
NOTE: What an image is, is simply a snap shot of a harddrive, sort to speak. Someone who has advanced knowledge of the Android OS, created a snap shot of their Phone "Harddrive" (firmware) so that others could simply replace their current Android OS, with the customized one.
f) Turn off your phone. HOLD DOWN the Volume Down Key, Home Key, and the POWER down key. As soon as the phone Vibrates release the POWER button only. Once the ODIN Screen comes up, release the other two buttons and hit the Volume UP key.
g) Now connect your phone to your computer using your USB Cable.
h) Now on your computer, bring up ODIN3 and click on PDA, this will bring up a file selector. You want to select the VRALEC Bootchain you just downloaded (VRALEC.bootchain.tar.md5 for example).
WARNING: DO NOT CLICK ANY CHECK-BOXES, YOU WILL DAMAGE YOUR PHONE.
NOTE: After you select the file, the box next to the PDA button should now be populated with the location of the file: C:\Users\yourname\Downloads\VRALEC.bootchain.tar.md5.
i) Now locate the Start button, located below the PDA button.
WARNING: DO NOT UNPLUG YOUR PHONE OR TURN IT OFF DURING THIS PROCESS.
NOTE: Once it is complete, your phone will restart.
j) After your phone restarts, go back to ODIN3 and click the Reset button, it is located right next to the Start button.
k) Unplug your phone and then turn it off, and finally take the back cover off.
l) We need to get back to the ODIN mode. Turn off your phone (if its not off already). Push and hold down the Volume Down Button, Home Button, and the POWER Button. As soon as the phone Vibrates release the Power Button only. Once the ODIN Screen comes up, release the other two buttons and hit the Volume UP Button.
m) Once you are in ODIN Mode connect your phone again to your computer
n) Now you need to download ClockworkMod Touch Recovery 6.0.2.3 (a recover image that you will use to replace your current Android OS with a Unlocked one). DOWNLOAD
o) After you download it, bring up the ODIN3 software again, and this time you want to UNCHECK Auto-Reboot. This is very important, after you uncheck it, the only option that should be CHECKED is the F.Rest Time option.
p) Now click on the Bootloader button and select the Clockwork recovery image we downloaded at step n. (CWM6023TouchVZW.tar.md5 for example)
NOTE: After you select the recovery image, the box next to the should display the location of the; C:\Users\yourname\Downloads\CWM6023TouchVZW.tar.md5
q) Now locate and click the Start button again, located at the bottom of the ODIN3 Panel
WARNING: DO NOT UNPLUG YOUR PHONE OR TURN IT OFF DURING THIS PROCESS.
r) After it has finished running, disconnect your phone, turn it off, and take out the battery. Leave the battery out for at least 20 seconds.
s) We need to now turn on the Phone into Recovery. To get into Recovery mode follow these steps; Turn off your phone (if its not off already). Push and hold down the Volume UP Button, Home Button, and the POWER Key. As soon as the phone Vibrates release the Power Button only.
NOTE Once you see "Recovery Mode..." at the top left of the screen you can let go of the buttons.
t) Once in recover mode, select reboot system now, after you click it, it will ask you if you want to disable recovery flash. YOU MUST SELECT "Yes - Disable recovery flash"
ATTENTION : The following step is very important, you must select Yes - Disable recovery flash
u) We need to now download the Super User Package to grant us Root. DOWNLOAD
NOTE: This package is a compressed zip file. DO NOT UNCOMPRESS THIS FILE, YOU NEED IT TO BE COMPRESSED.
v) Connect your phone back to your computer, and copy the zip file you just downloaded in step u, to your phone's External SD card. (SuperSU_Bootloader_FIXED.zip for example, will be the name of the file that you will copy over)
w) We now need to get into Recovery mode again. To get into Recovery mode follow these steps; Turn off your phone. Push and hold down the Volume UP Button, Home Button, and the POWER Key. As soon as the phone Vibrates release the Power Button only.
NOTE Once you see "Recovery Mode..." at the top left of the screen you can let go of the buttons.
x) Once you are in recovery mode, select "- install zip from sdcard"
y) Then click on "- choose zip from external sdcard"
z) Now find the file you downloaded and copied over. (SuperSU_Bootloader_FIXED.zip for example) and select it.
NOTE: if you can't see the file, you may need to scroll down, to find it.
Sigh... this is a long process.... I am past step z!
z1) Click on "- Yes - Install SuperSU_Bootloader_FIXED.zip"
z2) After its finished, a you will see the menu again. Click on "++++++ Go Back+++++++"
z3) Click on "- reboot system now" your system should now be restarting.
We are not done yet, we now need to add the Tmobile APNs to our phone, however, the phone is set up to prevent you to do this, because of greed, corruption and a broken system.
Here are the original instructions to allow APNs unlocking in its entirety : Full Guide
z4) go to the Play Store, then search for and install BuildProp Editor
z5) Once it is installed, open it up and it will as you to grant the application superuser access, click on "GRANT"
z6) click the phone Menu Button, and when the menu comes up, click on Edit
z7) Scroll all the way to the botton, and add these two lines to it:
ril.sales_code=LOL
ro.csc.sales_code=LOL
z8) After entering the new in the two new lines, click on Save Icon located top right. It will pop up a message near the bottom center that will let you know it was saved.
z9) After you save it, restart your phone.go to
•Settings
•More Settings
•Mobile Networks
•Access Point Names
Here are the original instructions to set up Tmobile APN in its entirety : Full Guide
z10) Click on the phones Menu Button and click on "+ New APN"
z11) Click on Name, set it "T-Mobile" then click OK
z12) Click on APN, and set it to "epc.tmobile.com" then click OK
z13) Click on MMSC and set it to "mms.msg.eng.t-mobile.com/mms/wapenc" then Click OK
z14) Click on the phones Menu Button and click on "Save"
z15) Click on "T-Mobile" and then restart your phone.
THATS IT! We are done... man
to root and unlock the bootloader and shows my phone is rooted but in step t I did not get the "Yes - Disable recovery flash" message. I did continue to the rest of the steps and it shows that my phone is rooted but I still can not stick to tmobiles towers and I keep getting a pop up asking if I want to switch to global. Does not clicking "Yes - Disable recovery flash" make the difference to making it work with tmobile? If so how can I fix this. Also, I still can not send or receive picture messages. I have the Samsung galaxy s3 i535 4.1.2. baseband version i535vrbmf1. I hope someone can help me

Instead of selecting global, try GSM/UTS
Sent from my Last Ever Samsung Device.

0331 said:
Instead of selecting global, try GSM/UTS
Sent from my Last Ever Samsung Device.
Click to expand...
Click to collapse
I have and still nothing. I have also tried to network unlock Via secret menu umts,debug screen,phone control, network lock but after that their is no options. Anyway to manually change the bandbase?

The baseband can be changed by flashing a different modem, I believe. What do you want to change it to?
The messages issue sounds like an APN issue to me.
Sent from my Last Ever Samsung Device.
---------- Post added at 03:51 PM ---------- Previous post was at 03:46 PM ----------
Where did you find the guide that you followed? Can you provide a link?
Sent from my Last Ever Samsung Device.

0331 said:
The baseband can be changed by flashing a different modem, I believe. What do you want to change it to?
The messages issue sounds like an APN issue to me.
Sent from my Last Ever Samsung Device.
---------- Post added at 03:51 PM ---------- Previous post was at 03:46 PM ----------
Where did you find the guide that you followed? Can you provide a link?
Sent from my Last Ever Samsung Device.
Click to expand...
Click to collapse
I was told by tmobile I need to unlock the phone and then change the baseband. I was able to change the apn without any app.

developers plzzzz help

stuck with the error plzz help flashed stock with odin but remains at setup connection

screenshot

It happened with me sometime back; I tried download mode & it worked. However, recovery mode Home & Power buttons is not accesible.
Take out battery. Re-insert it & "cafefully" press & hold Volume down & Home & Power buttons together & u will enter download mode(yellow triangle). Flash the firmware as usual & see if it works.

not working with one package file it remain at setup connection

1st goto download mode & flash via Odin. U still HAVE download mode. Download mode doesn't vanish in such a case.
This screen in the pic appears when u access download mode & without proper flashing, trying to switch on the phone again. So it shows that symbol.
Do as what I said in the post above.

while using odin
after some process
it get stuck on setup connection

Sanjay(SUN) said:
while using odin
after some process
it get stuck on setup connection
Click to expand...
Click to collapse
Have u made it to download mode or not yet?

done

Which firmware r u flashing? Use Odin v4.42 & filename of ops file should be exactly as BENI_v1.0.ops
I guess u need a froyo(4pkg) firmware.
I tried searching for nearly an hour but couldn't find.

Found the package file
Plz tell me the procedure to flash

Strictly follow the steps mentioned below:
Remember: Don't ever use firmwares made for GT-S5670i/GT-S5670L...etc. on devices like GT-S5670 (no appended alphabet here), coz it will brick ur phone.
First of all,
* Install samsung mobile driver on pc.
* Uninstall Kies(if installed); In some cases, it's also required to disable antivirus/firewall,...etc.(I don't know why).
* Preferably use laptop(for power backup & also it has good usb ports) with XP/Windows7(not Windows8)
* Goto "download mode" in the phone. Then connect it to pc.
* Open Odin v4.42.exe as administrator & you'll see "COM PORT MAPPING" box turned yellow(indicating that you've connected the phone to pc).
Please note that as soon as u select OPS file in the OPS field of Odin, the Odin straightaway displays the device model number in its title bar, regardless of whether ur phone is physically connected to pc or not.
Now set the files(according to which firmware u have) as follows:
For firmware containing 4 files(Note the beginning filenames)
OPS: BENI_v1.0.ops
BOOT: APBOOT_S5670.....
PHONE: MODEM_S5670.....
PDA: CODE_S5670.....
CSC: CSC_5670.....
Click "Start" & wait till Odin says "PASS". Don't touch ur phone during the process. Ur phone will reboot during the process & that's perfectly normal.
OR for firmware containing one file(Note the beginning filename)
Tick "One Package" field(below com port).
Now set the files as follows:
OPS: BENI_v1.0.ops
One Package: S5670...._HOME.tar.md5
Click "Start" & wait till Odin says "PASS". Don't touch ur phone during the process. Ur phone will reboot during the process & that's perfectly normal.
* Now ur firmware would have been flashed successfully. If ur phone bootloops(showing bootanimation again'n'again) then goto RECOVERY MODE(Press & hold Home+Power keys) & select "wipe data/factory reset" & "wipe cache partition"(Use "Volume up/down" to navigate up/down & "Home button" to select & "Power button" to go back to previous menu). Then select "reboot system now".
*DONE!!
Ur phone would be 100% alright now.
Please follow the sequence exactly as mentioned. U will not find any other way than this one. Although Screenshots are messy...I'm on mobile rite now
Hope this helps...!!

Using window xp but while running through administrater it ask for password but I have never done something like that
Sent from my A13-MID using XDA Premium 4 mobile app

Enter ur login password :- The password that u use when the pc is turned/powered ON.
& if u don't know of such thing then ask it from the system administrator.

Can u plzzz tell me the procedure
Sent from my A13-MID using XDA Premium 4 mobile app

I guess u don't know. So, only thing u can do(if u use others' pc/laptop) is kindly request them to allow u admin rights. Tell them ur phone's life is hanging in the balance & only they can save it.
Btw procedure is simple...U just need to enter admin username(if asked) & password in the "Open As Admin" dialog box of Odin.:thumbup:
And if u have ur own pc then u shouldn't have faced this problem.

my big bro have an laptop and when it boot it doesnot need password but while using run as adminstrator it is asking for a password

the only need is to make this phone a portable router i am having 2 pices of fit

vibe shot 6.0 update and root and xposed

1st way :
Pulled full OTA file for Lenovo Vibe Shot - z90a40 ROW
Installation Procedures for the official rekaveri following:
Clean, not rutirovannaya and the changed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the file update.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select English and tychem to Install update.zip
What follows is some question about the installation. Select YES
The installation process is 100% dlitelnyy.Posle installation still some time to think. Do not panic.
After installation is complete, select the restart system . The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
2nd way :
How to install TWRP rekaveri for the following:
Installed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the archive TWRP_lenovoota.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select Install and update the file with.
Make wipes are cache, dalvik-cache, data and phone.
After installation is complete, reboot the system. The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
down load files : https://cloud.mail.ru/public/36qb/qhqsDGNVr
3rd: for who have problem with 1st & 2nd
1- download thise file :http://lenovo-forums.ru/topic/19311...363_160625_row/?do=findComment&comment=497835
2- Installing the firmware using QFIL on the Lenovo device based on Qualcomm chips:
(A)
We set vcredist_x86.exe , which go in the complete set with "proshivalschikom" itself;
set himself "flasher" - QPST.2.7.422.msi ;
install drivers for the Qualcomm chips - they are in the archive Qualcomm_USB_Drivers.7z
(B)
Completely turn off your device , and then we press the volume up key (Volume Up), and holding it connect the USB-cable which is already connected to the USB 2.0 port of your PC - in the Device Manager, you should see the device Qualcomm Lenovo HS-USB QDLoader 9008
3-Just install the firmware: -
(A)
Run the program QFIL
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn)
, for this click on Knop «the Browse» , in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then choose prog_emmc_firehose_89XX.mbn file and click "Open" . then click on digging "the Load the XML ..." , alternately choose in the window that opens - first rawprogram0.xml and click "Open", and then patch0.xml and also click "Open".
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-76252800-1419253051.png
(B)
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
The device should restart at the successful process of filling the firmware and boot into Android OS.
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-39327800-1419253052.png
for root :::::::::
1ST : Unlock BootLoader
1. Install the software package QPST and drivers LenovoUsbDriver , QualcommUSBDrivers on your computer ( drivers are archived Service QPST programs )
2. Unpack the archive Z90a40_Android-L_unlock_7M.7z to the root of any drive.
3. Connect the device ( Z90a40 ) to a PC via USB-cable.
4. On your device, turn on debugging by the ADB .
5. Run the utility QFIL :
- in the line Select Build Type , select the Flat the Build
- in line Select Programmer press the button Browse and specify the path to the unzipped files \ Z90a40_unlock_7M \ the img \ prog_emmc_firehose_8936.mbn
- click on the button Load XML and select the first rawprogram0.xml and then patch0.xml
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-1.png.661990ee862f9d3e35653a046c561c4a.png
6. Run Reboot_QDLoader.bat::
http://lenovo-forums.ru/uploads/mon...7M_3.png.3018b3c020fc59cdab5e8b73461cc42e.png
7. In the main program window to see that the device is switched to the mode Qualcomm HS-USB QDLoader 9008 .
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-2.png.a73fc14b40f138b5a2fa71480a6df072.png
8.Start the process of firmware bootloader unlocked by pressing the button Download .
(If you have not defined QFIL utility device Qualcomm HS-USB QDLoader 9008 mode, then you should check through the Device Manager on your PC - there are no problems with Qualcomm driver)
9. At the end of the process unlocked bootloader firmware to the device you will see a sign in the window Status QFIL program the following lines:
Download Succeed
the Finish Download
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-3.png.3a5566b24283b342edc285b724004305.png
10.Turning off the device from the USB-cable and clamp button Power to turn on the device (sometimes takes up to 10-20 seconds).
11. Open the main settings menu, the device and go to the " About phone -> Device Information " and press 7 times to select " Build number " until the display shows that you have become a developer.
12. Go back to the device's main Settings menu and go to the " For Developers " in " Factory Unlock " switch the toggle switch in the ON state .
13.Turn off the device (Z90a40), we press both volume buttons and connects to a PC via a USB-cable (the device enters the mode fastboot ), then run Unlock_Bootloader.bat
You should see the value of true if the secondary Bootloader check the status in the string the Device unlocked :
(Bootloader) Device tampered: false
(Bootloader) Device unlocked: true
(Bootloader) Charger screen enabled: false
(Bootloader) Display panel: A
OKAY [0.046s]
finished. total time: 0.046s
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-4.png.49581f68c35fd8e8922eaef936037988.png
14.So all of this unlocking process is completed successfully .
files need links :
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56368
2nd: to do ( install TWRP 3.0.2.0 for Lenovo Vibe Shot )
Extract the folder TWRP archive TWRP-3.0.2.0_Z90a40_by_SevenMaxs.7z to the root of any drive
Turn off the device ( Z90a40 ), we press both volume buttons and connects to a PC via a USB-cable; the device will go into fastboot mode (on the PC must be set for the driver ADB).
Connect your phone to a PC via usb-cable, and run the Flash-TWRP.bat ( the Run-TWRP.bat for a single run TWRP.)
We are waiting for the phone to boot into TWRP
You can now disconnect the usb-cord
Installation is finished!
links : http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56391
Login or TWRP:
On the device is turned off hold down both volume buttons and the inclusion of produce, release the power button immediately once the device is turned on and the volume buttons once away; boot logo TWRP.
3rd : install su from twrp
su.zip link : https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=sharing
4th: install xposed.zip ( the erorrs have been solved)
link :
soooooooooooooooooooooon
soz for error happen before
updated 23/8/2016
that's all

Everything is fine, but TWRP in Russian how to change it to English?
xposed mode is not installing
in TWRP its said that I/O error on system folder.
MOD EDIT: Please don't quote the OP

In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot

shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
Click to expand...
Click to collapse
Root successful :good:
but I cant able to xposed framework
because in TWRP its says "cp: can't stat "/system" I/O error"
---------- Post added at 03:49 AM ---------- Previous post was at 02:51 AM ----------
cant able to install xposed framework tried everything
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app

xposed worked with me and now erorr
sorry for that but it solved try agine

since root of the rom I tried about hundred times but still xposed framework not installed ?
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app

yasirriaz1977 said:
since root of the rom I tried about hundred times but still xposed framework not installed ?
Click to expand...
Click to collapse
Try new zip

shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Click to expand...
Click to collapse
All work now

elbhrawy said:
Try new zip
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app

yasirriaz1977 said:
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Click to expand...
Click to collapse
I will upload now

elbhrawy said:
I will upload now
Click to expand...
Click to collapse
eagerly waiting for xpposed to work on my charmed device

yasirriaz1977 said:
eagerly waiting for xpposed to work on my charmed device
Click to expand...
Click to collapse
Updated

elbhrawy said:
Updated
Click to expand...
Click to collapse
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again

yasirriaz1977 said:
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
Click to expand...
Click to collapse
its worked with me

elbhrawy said:
its worked with me
Click to expand...
Click to collapse
but its not worked for me, please do something
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app

i have problem with update
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance

il_milanese said:
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
Click to expand...
Click to collapse
use qfil better

I have the bootloader unlock and TWRP installed,
the TWRP recovery let me know that i have no SO installed.
how can I install/flash a rom without brick the phone with this recovery installed?
Things to mustnt do with TWRP installed?
i've been 2 days without phone(bricked). I need help
Thank you

a bit confussing cause the english not too good, look like translated from other language.
can somebody fix it?
so can i have root with marsmallow?

Thank U.
OTA update v363 Ok. Thank U.