Database Info

[Q] How can I overclock my i5801?

Hi everyone,
I am a user of Samsung i5801. My device has been already rooted and ran with serveral root apps. Now, I would like to overclock my phone. I can only hold the frequency at 667Mhz with SetCPU, but I cannot set it to a higher one. How can I solve this problem? I really want to make my device running faster.
I am looking forward to your reply, thank you!

me 2!!
same fr me i want to overclock my rooted i5801...some 1 pls help!!
and if possible for the froyo version 2!!
iv searched the web but cant find any roms for the 15800 or i5801..

@unreal: yeh, even i waz searchin' lyk a hell for froyo on ma i5801 device but now no more search coz i already installed froyo on ma apollo i5801..
juz follow the steps:
What you will NEED!
1. A Samsung Galaxy 3 (DUH!).
2. The 2.2 Firmware
3. ODIN downloader
4. OPS files
5. A windows PC + samsung data cable.
download files:
firmware: I5800XXJPA.rar (108.32 MB)
Odin downloader : I5800_Odin_Multi_Downloader_v4.252.exe (435 KB)
ops files :apollo_0531.zip (207 Bytes)
then back up ya device with latest kies,afta back up juz reset to factory settings by typing *#*#7780#*#* in case not necessary though,
STEP 1
Download all the files above, and make sure you have the latest version of KIES software installed.
STEP 2
Extract the RAR to get a .tar file.
STEP 3
Open ODIN Downloader.
MAKE SURE you select One Package, Auto Reboot and Protect Ops checkboxes.
Select the Ops file (the file we downloaded earlier).
And finally select the tar package we extracted from the RAR earlier.
NOW CLOSE ODIN.
STEP 4
Backup you phone and data with the KIES software (after you are done exit KIES)
Turn OFF the Galaxy 3 and remove the Battery
Reinsert The Battery and Press the following buttons together
Home + Menu + Volume + Power
(it could be volume up / volume down / volume up+down , So, try all three)
Hold the buttons together till you see the downloading screen.
Step 5
Now Connect your Phone with your PC using the ORIGINAL DATA cable and wait for windows to finish installing the hardware
Once you get a prompt – “the device is ready to use”
Fire up ODIN DOWNLOADER (make sure the settings are same as before) Your phone will now show up connected in Com Port
STEP 6 (Final Step)
CLICK START and wait for process to finish, once done your device will automatically reboot and will have Android 2.2 running on it.
Enjoy!

I am a Hong Kong user, can I use this firmware update?

Overclocking
Dude you need a kernel that supports overclocking. obviously stock ROM doesn't suuport.
some links for kernels:
best out there : http://forum.xda-developers.com/showthread.php?t=997367
g3mod: http://forum.xda-developers.com/showthread.php?t=1252707
enjoy ...

Update Samsung Galaxy FIT S5670 with Official Gingerbread DDKT1 2.3.6 Firmware

pre Requisites:
- All the data present in your Galaxy FIT needs to be backed up ONLY by following the below mentioned steps so as to ensure that just in case if the data gets lost or corrupted.
- Charge left in the device should be minimum 60% so as to make sure that the phone doesn’t get turned Off in the middle of firmware update. Enable the USB Debugging in your device from the path “Settings > Applications > Development > USB debugging”
So,assuming that you have followed all the instructions mentioned above you now need to proceed further for procedure.
Procedure to Update
- Download Gingerbread 2.3.6 Package & odin-beni-ss.dll for Fit.zip in your computer after which you need to extract the same.If Promted For Password then You Should Enter Password as “sampro.pl”.
For 2.3.6 Update Package- http://hotfile.com/dl/140199372/0b98375/GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1.rar.html
- Match the extracted files from the below shown screen capture, even if single file is missing then you need to check with the extraction or download process.
- From extracted files, open Odin executable file and turn Off the phone so as to enter the device in the download mode.
- Now, you need to enter the by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. Just in case if the device boots in the normal mode then you will have to again try the process of entering into the download mode
- After entering the phone in the download mode, connect the device to the computer while keeping the Odin opened. Within a minute, the ID : COM section will turn yellow which will mean that all the drivers have been successfully installed and you are now ready to proceed to the next step.
- Click on the “OPS” option in the Odin to select the below mentioned file, tick on “One Package” option and then select the One Package option as mentioned below.
OPS – BENI_v1.0.ops
One Package – S5670DDKT1_S5670ODDKT1_S5670DDKT1_HOME.tar.md5
- Click on Start and then wait for the device to get restarted. Once the device gets restarted, you will be asked to enter the Google Account credentials. Once you see the home screen in your phone, disconnect the connected phone.
Congratulations!!! You have successfully update ur android with 2.3.6 Gingerbread Firmware
_______________________________________________________________
Press THANKS button If I help U in any manner

Hi!
Does this firmware includes greek language?Thanks!

may be no...
Because DD is for india:thumbup:
Sent from my GT-S5670 using xda app-developers app

Do you know where i can find or what is the name for the firmware to search?Also i have a greek galaxy fit with 2.3.6,do you know how to make a full backupo of this firmware?Thanks!

i guess everyone knows this

zafisinl said:
Do you know where i can find or what is the name for the firmware to search?Also i have a greek galaxy fit with 2.3.6,do you know how to make a full backupo of this firmware?Thanks!
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/
In search write s5670.

password
what is the password for this file????

It's witten over there on sammobile
Sent Via XDA™ Premium

Password
rajmi said:
what is the password for this file????
Click to expand...
Click to collapse
Read the first post carefully
Pasword : sampro.pl

The rar file just has the md5 file, where can I find the other files? I tried manually downloading the files from different locations but it just sits at downloading mibib and doesn't do anything. The flashing process just sits at downloading MIBIB and doesn't go anywhere, I have tried waiting for as long as 30mins, now the mobile doesn't even start with the previous firmware. When started it shows an icon like connection problem between a computer and mobile right after the initial samsung logo and sits there.Please help

zafisinl said:
Hi!
Does this firmware includes greek language?Thanks!
Click to expand...
Click to collapse
Most probably it does.I flashed mine with a stock russian rom.the phone started in russian but you can easily navigate through the icons to settings and change the language.I turned it to greek

[GUIDE] How to Flash Stock ROM or Unbrick any Samsung Phone?? (Lower End Phones)

Note: This guide is only applicable for lower end devices like Galaxy Mini, Fit, Ace & Suit
If you have bricked your phone you don't have to worry anymore, this method helps you to do a complete reset and unbrick your Phone.
This also helps if your phone is laggy and you want to revert back to Stock ROM.
What all you need??
→ Stock Firmware for your Phone (You can get it from www. sammobile.com/firmwares) - Remove Spaces
→ Samsung Drivers, if you don't have (You can download from http:// developer. samsung. com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows) - Remove Spaces
→ Odin MultiDownloader (Google this with Name & Model number of your phone)
→ OPS file (Google this with Name & Model number of your phone and download)
How to do??
→ First of all Install the Drivers if you don't have it installed in your Computer
→ Now Open Odin Multidownloader
→ Now you'll have to tick the check-boxes "One Package, Auto Reboot and Protect OPS"
→ Now at the right side you'll be able to select the files option. Click on OPS and select your OPS file by navigating into directory, similarly select One Package and select the md5 or md5.tar file (that's the firmware file)
→ That's it.. Now enter into the download mode in your phone, in most phones it is Turn Off your phone.. Hold "vol down+home+power" and leave when you see Samsung logo
→ Connect your phone to system via USB, you'll see your phone getting detected on Odin, your COM port will be shown
after your phone gets detected
→ That's it! You are done setting up Odin.. Click on Start and wait for few minutes, your phone will be flashed with stock Firmware
→ After it's done flashing the stock ROM, you'll see a successful message (Your yellow box gets blue and says "PASS" or Pop Up saying "Done")
→ Done! You'll have flashed the stock ROM or have unbricked your device! Now remember that you go to recovery mode and "Factory Reset" & "Clean Cache", You can enter recovery mode by holding "menu+power button" (on many devices)
See this post on my blog "www. androidpagez .tk/2013/11/how-to-unbrick-or-flash-stock-firmware .html" - Remove Spaces

paccha said:
How to do??
→ First of all Install the Drivers if you don't have it installed in your Computer
→ Now Open Odin Multidownloader
Click to expand...
Click to collapse
FYI not all Samsung phones can use Odin Multi downloader, the guide refers to
Odin version 4.38 is only meant for
Samsung Galaxy Mini S5570
Samsung Galaxy Fit S5670
Samsung Galaxy Suit S5670
Samsung Galaxy Ace S5830
and not all Samsung Phones uses ops. files
as such this guide is not for any but above models, please correct your Title
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
FYI not all Samsung phones can use Odin Multi downloader, the guide refers to
Odin version 4.38 is only meant for
Samsung Galaxy Mini S5570
Samsung Galaxy Fit S5670
Samsung Galaxy Suit S5670
Samsung Galaxy Ace S5830
and not all Samsung Phones uses ops. files
as such this guide is not for any but above models, please correct your Title
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
Thanks for notifying.. I've changed the Title!!

[GUIDE] Recover Samsung Device from Bootloop/Back to Stock Rom(Almost for All Model)

I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
And for mod, please make sticky for this thread, so for Samsung owner can easily find it
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For smarphone : hold power button+menu button+volume down (vol -)
- For tablet : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
Credit goes to
@nasheich (For the tutorials)
@daerragh (For Usb Driver and Odin)

Thanks for ur reply, but in my case,device can't go into download mode,it only go in cwm recovery mode with all effort,
So what to do now?

zeeshantayyab said:
Thanks for ur reply, but in my case,device can't go into download mode,it only go in cwm recovery mode with all effort,
So what to do now?
Click to expand...
Click to collapse
if you can't go to the download mode, you should find other custom rom fir your device and flash it through recovery,
make sure it's custom recovery, not Recovery that came from the device(Samsung)

Samsung firmware sites has been fixed

Update Samsung Galaxy On5 SM-G550FY (non-Pro) to Nougat Pro firmware - Detailed

As one of the previous threads in this section mentioned the same (that On5 Pro firmwares work on non-Pro On5 models also), I can confirm that it works on Samsung Galaxy On5 SM-G550FY (2015 non-Pro) model. The downloaded firmware was a latest On5-Pro Nougat version that I could find on https://updato.com but works with old non-Pro On5 model as well.
This post is "only" meant to chalk out the complete process.
Detailed instructions for people who've not rooted their Samsung devices before:
Steps to replicate the process:
Preparation for rooting first:
Make sure your phone battery is charged to 70% or more
Backup your device data
Make sure you install Samsung's Android USB Driver for Windows on your PC, if you haven’t already. >> Official link
Download the latest .tar image of TWRP for Galaxy On5 (it is compatible) >> Official link
Download and Unzip the latest version of Odin version >> Official link
Download the latest Super SU >> Official link
Now follow the instructions:
First you should enabled Developer options. If Developers Option is hidden, go to Settings > About Phone > Built Number (tap on it for 5-8 times)
Enabled USB Debugging and OEM unlock.
Install Android USB Drivers on your PC.
Connect the phone to you PC using the USB cable and copy the SuperSU.zip file into any directory of your internal storage.
Turn off your Samsung Galaxy Boot the device into Download Mode as follows: press and hold Volume Down, Home and Power buttons together.
When a warning triangle appears on screen, press Volume Up button to enter Download Mode.
Launch Odin.exe by click right and run as administrator on computer.
Connect your phone to the computer. Odin will automatically detect your phone and show the “added" message.
In Odin, tap AP button and find the TWRP Recovery file you downloaded earlier and select it.
Uncheck Auto-reboot in the options tab in Odin
Click Start in Odin.
Once the root installation is done, your phone will reboot and soon a PASS message with a green background appears in the left-most box at the very top of Odin.
Remove the battery and then re-insert it again.
Boot into “recovery mode”, by pressing and hold Volume Up + Home +Power buttons simultaneously
In the TWRP mode Swipe to Allow Modification
Tap ‘Install’
Select Storage and scroll to location of SuperSU.zip file.
Select the .zip file and swipe the bar to confirm. This will start flashing the .zip file.
Once the flashing finished you will see the ‘Reboot System’ option, click it to reboot your device.
After reboot, if the SuperSU App exist on your Application Menu on your smartphone it means you’ve successfully rooted your device.
Can take further help from here (works for this On5 model as well) >> https://forum.xda-developers.com/sa...nt/updated-root-instructions-samsung-t3747435
After rooting:
You can remove the bloatware first using any "root uninstaller" app from the Play Store. Be careful as to not uninstall any vital system apps.
Now go to >> https://updato.com and download the latest On5 SM-G550FY firmware (>1GB) by searching "On5" and sorting firmwares by date and selecting the region (for my model make the region was India (INS) >> You can use this Working link directly, as well
The above version is an On5 Pro Nougat version but works in old On5 models as well.
Final Steps:
Now again launch Odin.exe by click right and run as administrator on computer.
Connect your phone to the computer. Odin will automatically detect your phone and show the “added" message.
In Odin, tap AP button and find the firmware file you downloaded earlier and select it. You might need to first extract the firmware file.
Click Start in Odin.
The phone will reboot and you'll have updated your Lollipop/Marshmallow device to Nougat.