I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
And for mod, please make sticky for this thread, so for Samsung owner can easily find it
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For smarphone : hold power button+menu button+volume down (vol -)
- For tablet : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
Credit goes to
@nasheich (For the tutorials)
@daerragh (For Usb Driver and Odin)
Thanks for ur reply, but in my case,device can't go into download mode,it only go in cwm recovery mode with all effort,
So what to do now?
zeeshantayyab said:
Thanks for ur reply, but in my case,device can't go into download mode,it only go in cwm recovery mode with all effort,
So what to do now?
Click to expand...
Click to collapse
if you can't go to the download mode, you should find other custom rom fir your device and flash it through recovery,
make sure it's custom recovery, not Recovery that came from the device(Samsung)
Samsung firmware sites has been fixed
Related
***Disclaimer is the usual***
!EE4! (Just sharing the knowledge I was given, All files for download are posted below) [THIS WILL TAKE YOU BACK TO STOCK UNROOTED FOR A FRESH START]
1. Assuming you have had a bad flash, you are stuck in recovery!?!? Well dont panic, *Attempt to flash another ROM and let it reboot into recovery where you are stuck. [For me this applied for the CWM look alike with the banana man] The attempt will make sure we get into download mode [Yellow triangle with Android man doing shovel construction]
2. Remove the battery from the device and open ODIN*
3. Hold VOLUME DOWN then plug the phone in via usb, you should have download mode screen and ODIN should recognize. If not, Download the SAMSUNG DRIVERS. (Again, links are posted below) After those download, try step 3 again.
4. In ODIN, Place the chare.pit file in the PIT section
5. Place the md5 tar file in the PDA section. !***MAKE SURE PDA BOX IS CHECKED***!!***CHECK RE PARTITION BOX***!!***UN CHECK AUTO REBOOT***!!
6. Okay SO, ODIN should say COM port in yellow meaning its being read, says its been added in the message box, etc. You have the boxes checked and unchecked, phone is in downloading mode, files are loaded in, and ALL PROGRAMS RUNNING ARE DISABLED AND CLOSED.
7. Press start and you should be good, let it do its thing!
****IF your phone is flashing the backlight keys and just wont be read or go to downloading mode make sure your are holding volume down then plug it in via usb. The samsung charger cord that the phone came with is your best bet for the results.
****IF your phone is soft bricked and you have the screen described as this.... (PHONE ICON).....(TRIANGLE).....(COMPUTER ICON). Please put battery in phone, then hold volume down and plug in via usb. (That should have it in downloading mode and read)
Thanks go to anoninja118!!!!!!!!!!!!
Any questions? Go for it. Ill be happy to guide.
-ODIN. http://www.megaupload.com/?d=J4Y10P6G
-File to go in PDA section http://www.multiupload.com/MG4H7JJMPN
-PIT file in PIT section http://www.mediafire.com/?kk62yxpp8b8x918
- Unzip the PDA file with this - http://fyzip.com/
Again, make sure all is correct and all is matching these directions.
I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For device with Menu button : hold power button+menu button+volume down (vol -)
- For device without Menu button : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For device with Menu button : hold power button+menu button+volume down (vol -)
- For device without Menu button : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
HI all,
I saw the need of reposting my post #282 (main ZOPO ZP999 thread) for people who want to root, flash recovery or for some reason lost control of their precious Zopo and want to regain it
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have noticed that the link sometimes is unavailable : Mod edit sales link removed
Therefore i post it here again : also THANKS TO JASPER===JG77 and Ghost45
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is what you have to do:
- Preferably use a Windows 7 (x32 or x64) system
- Download and install drivers http://www.4shared.com/rar/f0a9TeP8ba/Zopo_ZP999-3X_32-64bit.html
- Download the firmware and extract it (a stock ROM) http://www.zopomobileshop.com/content/9-download-zopo-mobile-latest-rom
- Download a recovery (I used CarlivTouch) http://www.4shared.com/file/xKa5nYyuce/recovery_CarlivTouch_30_ZP999.html
- Download SP Flashtool and extract http://www.4shared.com/zip/FlMUfELsba/SP_Flash_Tool_exe_Windows_v514.html
- Download SuperSu https://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
- Boot your phone and connect to your PC and copy the SuperSu zip to your SD (I used a micro SDcard and not phone storage)
- Disconnect and shutdown the phone
- Start SP Flashtool (as administrator)
- Click 'Scatter-Loading' and select the 'MT6595_Android_Scatter.txt' from the downloaded Firmware! Picture 1
- Remove all selections except (!) recovery
- Click on the location of the recovery
- Select the custom downloaded recovery file (in my case recovery_CarlivTouch_30_ZP999.img) Picture 2
- Remove the battery from your phone (DON'T CONNECT YET) (battery pull :not necessary i think...but does not harm )
- Make sure you see 'Download Only' in SP Flashtool and click the 'Download' button
- Now connect your phone to your computer and leave the battery out of it!
- Wait till you see a green sign Picture 3
- Disconnect your phone but the battery back in but (!) DON'T BOOT
- Connect the phone to a charger and wait till it shows the battery level
- Press the buttons Volume-Up and Power and hold them
- After the first Zopo screen release Power (I kept holding Volume-Up)
- If all is well you now see the custom recovery! (you can let go of the volume button ) (if it didn't work the first time because of wrong timing, just shut down again and retry)
- Immediately install the SuperSU ZIP file (install zip-> Choose zip from /storgage/sdcard1)
- When done choose reboot and if you get questions about fixing to keep the custom recovery and fix root, say YES
- Let it boot into Android and Check ROOT with f.e. rootchecker
- Go to Google Play Store and install Busybox (not necessary)
- Start Busybox and make sure you give it Root right (not necessary)
- Press Install, if it fails the first time do it a second time. You should see an OK message if all is well. (not necessary)
- Reboot your phone, and PRESTO, your phone is rooted.
If you would install MobileUncle Tools from Google Play Store you can see you are rooted. (Here you allways can go in recovery without any problems)
Thanksbutton appreciated
@raystef66,
New Zopo Official have taken new Forum of Zopomobileshop original first Zopo Forum.
So New threads are always here in Xda ...look for them.
So first,
Download ODIN on your PC, grab the firmware from SamMobile (in case anything goes wrong), unlock OEM unlocked in developer settings on your phone and USB debugging.
Let's start!
1) google this: [RECOVERY][TWRP 3.3.0][7.0/8.1/9.0] Galaxy J5 (2017) [17.04.2019]
2) go to "downloads"
click the lates release, it will redirect you to a github page.
CTRL+F and search "releases" or just click the releases button if you know where it is
scroll down on the page and click the "assets" button
download the TWRP-3.3.0-j5y17lte-20190417.tar file
2) Go into download mode on your phone, connect it to the PC
3) !!!VERY IMPORTANT!!! (i thinks ) go to settings in odin and untick "auto-reboot" just to be safe.
4) Go back in odin's first tab, click AP and get the TWRP-3.3.0-j5y17lte-20190417.tar from Downloads floder
5) Now you can finally click Start in Odin.
6) Wait a tiny little bit
7) Hold Volume Down and Power buttons till the phone is out of download mode
8) Hold Volume Up, Power button and Home button to go into TWRP.
Congratulations! You installed TWRP.
(I can't post links sorry you gotta google the things yourself but this should make even total newbies understand how to do these things)
(can't post in j530f forum either, hope you found this easily)