Database Info

ZUK ZUI Marshmallow version (2.3) [OFFICIAL]

ZUK ZUI Marshmallow version (2.3) link https://mega.nz/#!fYpwFRCT!RyQrvcXGVR5z9GokqgUc-pRbSdgK8uSUoiwmPorIwe8
stock ROM for Lenovo ZUK Z1 - Android 5.1.1 (Official Version:ZUI) Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729
This is ZUK Z1 zui version which is Chinese and you can change the language to English after the flash
Hey Guyzzz...
Last week i'm searching how to flash ZUK z1 zui version finally got some idea how to do that. so here i'm just posting my experience maybe it will hep for others as well. This is the first time I'm posting some thread related to mobile so obviously there should be some mistakes in typing and explaining. first of all i do apology for that.
Download the Full ROM file from here and extract to your computer. Here is the link https://mega.nz/#!fYpwFRCT!RyQrvcXGV...uSUoiwmPorIwe8
1. You need to install Qualcomm driver and ZUK Z1 driver to you PC, you can download it from this link https://mega.nz/#!7ZpXUSSK!Rx8IptfmNcu_5TORmR7Z2egWOJbDV8l_0gE3E5aevNY
2. The Qualcomm driver file shouldn't be signed so most of the windows operating system will not allow you to install, to install the Qualcomm driver you need to enable the unsigned driver installation.
If you are using windows 10 or windows 8. or 8.1 you can enable in this way. (go to the power option from the start menu hold the shift key from the keyboard and select restart option) for more information you can see this link http://www.howtogeek.com/167723/how-...igned-drivers/
If you are using windows 7 you can disable the driver signature verification from the boot menu. (when you see your computer motherboard name or pc logo just type F8 so there you can choose the option disable driver verification)
3. If you install the driver files successfully then you need to download and install the QFIL tool you can download the file from this link https://mega.nz/#!jYQh0bzS!Uvg2hqXOQ8Q2pyKBT6PkL8v4rRbde3l__ZXpY9yKMKs
open the QFIL tool you can see on the top "no port available" then just power off you mobile volume up key hold connect the usb cable to the computer then you can see the QFILL too will detect the driver the name like "Qualcomm HS-USB QDloader 9008 (COM4)" now the driver installation has completed.
Attachment 3573534
(Note the driver file will stay maximum 5 seconds before that you need to press the download key)
Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.
Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729 _qpst.rar file which is extracted earlier all files you will get it from the ROM folder.
if it's finished then your mobile will be restart automatically.
NOTE:- You will get new update but don't update it now install the recovery and flash the gapps file other wise if you updated to the newer version which is 1.2.0.40 then it's not easy to flash the recovery.
If you have any doubt please leave the comment. Be careful if you brick the mobile i will not responsible so if you have any doubt before you proceed please ask.

Ramshu97 said:
Stock ROM for Lenovo ZUK Z1 - Android 5.1.1 (Official Version:ZUI) Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729
This is ZUK Z1 zui version which is Chinese and you can change the language to English after the flash
Hey Guyzzz...
Last week i'm searching how to flash ZUK z1 zui version finally got some idea how to do that. so here i'm just posting my experience maybe it will hep for others as well. This is the first time I'm posting some thread related to mobile so obviously there should be some mistakes in typing and explaining. first of all i do apology for that.
Download the Full ROM file from here and extract to your computer. Here is the link https://mega.nz/#!rYgB2QpK!r2raxb6-Ms-Zz1MIiSw3MJJBozWNoFc-DXbb3U4YAMA
1. You need to install Qualcomm driver and ZUK Z1 driver to you PC, you can download it from this link https://mega.nz/#F!LcgDmRyC!4unf8UQqOBoZayAuv-D3Tg
2. The Qualcomm driver file shouldn't be signed so most of the windows operating system will not allow you to install, to install the Qualcomm driver you need to enable the unsigned driver installation.
If you are using windows 10 or windows 8. or 8.1 you can enable in this way. (go to the power option from the start menu hold the shift key from the keyboard and select restart option) for more information you can see this link http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/
If you are using windows 7 you can disable the driver signature verification from the boot menu. (when you see your computer motherboard name or pc logo just type F8 so there you can choose the option disable driver verification)
3. If you install the driver files successfully then you need to download and install the QFIL tool you can download the file from this link https://mega.nz/#!qIx0ybKC!YfeWZMHTF6WoNhI2DeJxIps93gK2v8rEqDr5rEOYUc4
open the QFIL tool you can see on the top "no port available" then just power off you mobile volume up key hold connect the usb cable to the computer then you can see the QFILL too will detect the driver the name like "Qualcomm HS-USB QDloader 9008 (COM4)" now the driver installation has completed.
View attachment 3573534
(Note the driver file will stay maximum 5 seconds before that you need to press the download key)
Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.
Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729_qpst.rar file which is extracted earlier all files you will get it from the ROM folder.
if it's finished then your mobile will be restart automatically.
NOTE:- You will get new update but don't update it now install the recovery and flash the gapps file other wise if you updated to the newer version which is 1.2.0.40 then it's not easy to flash the recovery.
If you have any doubt please leave the comment. Be careful if you brick the mobile i will not responsible so if you have any doubt before you proceed please ask.
Click to expand...
Click to collapse
can you take videos n share the links,
( this where will get it, and pls explain in better way Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.)

[email protected] said:
can you take videos n share the links,
( this where will get it, and pls explain in better way Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.)
Click to expand...
Click to collapse
@[email protected] Please check the below link it's not ZUK Z1 flashing but it's the same method just read the article.
https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/

Where exactly to obtain these files?
"prog_emmc_firehose_8974.mbn", "rawprogram0.xml" and "patch0.xml"
I don't see them included in the files with tools that you listed.

ferbulous said:
Where exactly to obtain these files?
"prog_emmc_firehose_8974.mbn", "rawprogram0.xml" and "patch0.xml"
I don't see them included in the files with tools that you listed.
Click to expand...
Click to collapse
It's not with tool, it's with the ROM file download the ROM from this link https://mega.nz/#!rYgB2QpK!r2raxb6-Ms-Zz1MIiSw3MJJBozWNoFc-DXbb3U4YAMA
and extract with winrar then you can see those files

Ramshu97 said:
It's not with tool, it's with the ROM file download the ROM from this link https://mega.nz/#!rYgB2QpK!r2raxb6-Ms-Zz1MIiSw3MJJBozWNoFc-DXbb3U4YAMA
and extract with winrar then you can see those files
Click to expand...
Click to collapse
Oh man, I didn't notice that
Thanks, that was bugging me the whole time where to get those files

hello where is the softwere toflash

lior1262 said:
hello where is the softwere toflash
Click to expand...
Click to collapse
Read the form properly

Marshmallow ZUI version is coming soon..... Just started uploading.
Official ZUI marshmallow version you can download from below link.
https://mega.nz/#!fYYh0QDA!nYf0vvXpzyl5q5t-8-cZQWENbYoIN__vaHO_Weyg-YU

Marshmallow screenies
Thanks Ramshu,
Can you post some screenshots in case you're running this version,
Any new features worth mentioning?
Thanks

Nickthegr8 said:
Thanks Ramshu,
Can you post some screenshots in case you're running this version,
Any new features worth mentioning?
Thanks
Click to expand...
Click to collapse
Currently i'm not using this version, i'm testing with other custom ROMS like CM13 unofficial if you want to know the details about ZUI please followup with below link.
http://bbs.zuk.cn/z1/t56977/

ZUI 1.6.225 (Android 6 Marshmallow) Stable flashable ZIP for TWRP
DOWNLOAD ROM Provided by Tymoon @ 4PDA.ru Forum
Included:
Unlocked Bootloader
SuperSU
Gapps:
DOWNLOAD GAPPS
Use morelocal 2 to change apps to your language
Best Rom for me... So much better than cm
Happy flashing

Thanks for the sharing, will check the version.

Raphi86 said:
ZUI 1.6.225 (Android 6 Marshmallow) Stable flashable ZIP for TWRP
DOWNLOAD ROM Provided by Tymoon @ 4PDA.ru Forum
Included:
Unlocked Bootloader
SuperSU
Gapps:
DOWNLOAD GAPPS
Use morelocal 2 to change apps to your language
Best Rom for me... So much better than cm
Happy flashing
Click to expand...
Click to collapse
Thanks for sharing

Raphi86 said:
ZUI 1.6.225 (Android 6 Marshmallow) Stable flashable ZIP for TWRP
DOWNLOAD ROM Provided by Tymoon @ 4PDA.ru Forum
Included:
Unlocked Bootloader
SuperSU
Gapps:
DOWNLOAD GAPPS
Use morelocal 2 to change apps to your language
Best Rom for me... So much better than cm
Happy flashing
Click to expand...
Click to collapse
Thank you! How is it going to work in the future for updates?

Ramshu97 said:
ZUK ZUI Marshmallow version link https://mega.nz/#!fYYh0QDA!nYf0vvXpzyl5q5t-8-cZQWENbYoIN__vaHO_Weyg-YU
stock ROM for Lenovo ZUK Z1 - Android 5.1.1 (Official Version:ZUI) Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729
This is ZUK Z1 zui version which is Chinese and you can change the language to English after the flash
Hey Guyzzz...
Last week i'm searching how to flash ZUK z1 zui version finally got some idea how to do that. so here i'm just posting my experience maybe it will hep for others as well. This is the first time I'm posting some thread related to mobile so obviously there should be some mistakes in typing and explaining. first of all i do apology for that.
Download the Full ROM file from here and extract to your computer. Here is the link https://mega.nz/#!rYgB2QpK!r2raxb6-M...Fc-DXbb3U4YAMA
1. You need to install Qualcomm driver and ZUK Z1 driver to you PC, you can download it from this link https://mega.nz/#F!LcgDmRyC!4unf8UQqOBoZayAuv-D3Tg
2. The Qualcomm driver file shouldn't be signed so most of the windows operating system will not allow you to install, to install the Qualcomm driver you need to enable the unsigned driver installation.
If you are using windows 10 or windows 8. or 8.1 you can enable in this way. (go to the power option from the start menu hold the shift key from the keyboard and select restart option) for more information you can see this link http://www.howtogeek.com/167723/how-...igned-drivers/
If you are using windows 7 you can disable the driver signature verification from the boot menu. (when you see your computer motherboard name or pc logo just type F8 so there you can choose the option disable driver verification)
3. If you install the driver files successfully then you need to download and install the QFIL tool you can download the file from this link https://mega.nz/#!qIx0ybKC!YfeWZMHTF...8rEqDr5rEOYUc4
open the QFIL tool you can see on the top "no port available" then just power off you mobile volume up key hold connect the usb cable to the computer then you can see the QFILL too will detect the driver the name like "Qualcomm HS-USB QDloader 9008 (COM4)" now the driver installation has completed.
Attachment 3573534
(Note the driver file will stay maximum 5 seconds before that you need to press the download key)
Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.
Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729 _qpst.rar file which is extracted earlier all files you will get it from the ROM folder.
if it's finished then your mobile will be restart automatically.
NOTE:- You will get new update but don't update it now install the recovery and flash the gapps file other wise if you updated to the newer version which is 1.2.0.40 then it's not easy to flash the recovery.
If you have any doubt please leave the comment. Be careful if you brick the mobile i will not responsible so if you have any doubt before you proceed please ask.
Click to expand...
Click to collapse
Password for "ZUK_Z1_1.5.215_M_ST_160105_Modifyed.zip" ?

Raphi86 said:
ZUI 1.6.225 (Android 6 Marshmallow) Stable flashable ZIP for TWRP
DOWNLOAD ROM Provided by Tymoon @ 4PDA.ru Forum
Included:
Unlocked Bootloader
SuperSU
Gapps:
DOWNLOAD GAPPS
Use morelocal 2 to change apps to your language
Best Rom for me... So much better than cm
Happy flashing
Click to expand...
Click to collapse
Can it be flashed with Breadcrust's twrp update 5 and can gapps be flashed back to back after flashing rom or do we need to reboot after flashing rom and then reboot back to recovery to flash gapps. Do we need to edit updater script to be able to flash via twrp and lastly will it erase internal data.
Sent from my Z1 using Tapatalk

os_man said:
Password for "ZUK_Z1_1.5.215_M_ST_160105_Modifyed.zip" ?
Click to expand...
Click to collapse
New link has updated with key, https://mega.nz/#!fYYh0QDA!nYf0vvXpzyl5q5t-8-cZQWENbYoIN__vaHO_Weyg-YU

ranka79 said:
Can it be flashed with Breadcrust's twrp update 5 and can gapps be flashed back to back after flashing rom or do we need to reboot after flashing rom and then reboot back to recovery to flash gapps. Do we need to edit updater script to be able to flash via twrp and lastly will it erase internal data.
Sent from my Z1 using Tapatalk
Click to expand...
Click to collapse
Just flash the rom and the gapps without a reboot in any twrp recovery. Internal data will not be erased. No edits needed

Zui device is code named k9 and cyanogenOS is code named hem, are you sure no need to edit updater script or it has already been modified, I'm currently on cos, will I be able to flash back cos in case something goes wrong. Sorry for noob questions
Sent from my Z1 using Tapatalk

Question Lenovo Phab PB1 770m no operating system help

Hi all i have new Lenovo PB1 770m I attempted to root it the TWRP was installed but it was not rooted
then I tried to update the firmware to the latest 151111 and no go, in the end i managed to delete the operating system so now I can boot to recovery mode only, When I try to restart it comes up with No OS Installed, I have tried to install xposed v79 sdk21 arm64zip no go, Ok now I know that I am an IDIOT for
not making a backup of original system and not cheking the firmware was the same as the root guide,
On the top of recovery screen is :- 2.8.7.7 SevenMaxs and TeamWin Recovery Project, I guess this could
be an expensive lesson, I have been looking for an original ROM with no luck so any help would be very
much appreciated, Thanks pluto1956, Mike
ps used info and files from here to try and root. http://forum.xda-developers.com/andr...oting-t3290347
UPDATE I managed to get a ROM from Russian site PB1-770M_S000156_150930_ROW_fastboot.7z 1.8gig
instructions say to be installed from computer via usb my problem is I can only access the internal storage or external SD card not the Usb-otg so it seems I can only update from the sd or internal memory
tried putting the rom on both but no go

Hi is there anybody that knows where and how to install the stock firmware for the phab PB1-770M

HELP
Same as above. need a stock rom. formatted internal storage mistakenly. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

naeemdurrani said:
Same as above. need a stock rom. formatted internal storage mistakenly. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.

Thanks brother, yesterday i downloaded one russian rom in zip format and there was a .bat file included in it. i only double clicked and it flashed through adb and fastboot and it was successfull. i got the operating system 5.0.2 but WLAN is not working, tried flashing several time but no luck. i learned that it is still under warranty ..so sent it to warranty. in a week it will be back with be for testing again hopefully.
well i will try your method as soon as i get my beast again. Thank you so much for helping out in timely manner, really appreciate it brother.
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
---------- Post added at 08:10 AM ---------- Previous post was at 08:06 AM ----------
it is very easy my friend just look into the only topic/thread about Phab plus in xda. it will guide you well.
if you get any error in recovery like footer is wrong/signature verification failed. connect your phone and first check if your device in being tracked by adb. use adb devices.
if your device appear in the list of devices ..use fastboot oem unlock then flash sevenmax twrp again after entering into temporary twrp as per phab plus thread.
0verdaflow said:
How can you root this damn phones.... i was trying like for 2 days....
Click to expand...
Click to collapse

jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
Could you please elucidate more? I downloaded the ROM and the flash program. However, I've no clue how to get going. I don't even see the xml files anywhere (as mentioned by you).
Just don't want to screw it up bad so being little more cautious.

jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
im getting this error
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
cant flash the stock rom

man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Wakatsik said:
im getting this error
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
cant flash the stock rom
Click to expand...
Click to collapse

naeemdurrani said:
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Click to expand...
Click to collapse
i cant use the .bat cause my phone is already bricked...it wont be recognize by the app...the only way is thru QFIL but the problem is that i always get the error above

Hi, same here. I tried using QFIL and getting Sahara Fail. Then tried clicking on the bat file but its not working since the phone is not recognized. Please help.
EDIT : I got the QFIL working just now and my phone is working. Flashed the stock rom and I think it will be just fine.

whiskey_1388 said:
Hi, same here. I tried using QFIL and getting Sahara Fail. Then tried clicking on the bat file but its not working since the phone is not recognized. Please help.
EDIT : I got the QFIL working just now and my phone is working. Flashed the stock rom and I think it will be just fine.
Click to expand...
Click to collapse
My phone was wiped by me . I have TWRP and my phone is read as ADB interface (when in recovery mode). I tried adb devices and it returned 1f82f24b recovery. I also can access my phone memory from PC when in TWRP recovery which enables me to transfer files.
My problem is it is only read as ADB interface not as Qualcom COM port device. When I try Download_with_partition.cmd I get the error that it can not distinguish devices and to try. Any solution by those managed to install it successfully?

For everyone landing in this page due to wiping his OS of Lenovo Phab Plus by mistake (like I did), please refer to this thread:
Lenovo Phab Plus PB1-770M Stock ROM needed

Thanks!
jotade said:
Well i did it. Is really simple but it seems nobody has this problem before. You need
- Download Stock Firmware from russian lenovo site
- The Tool i used is QPST_2.7.422 QFIL it cames with the Drivers (i used Win8.1)
- Put phone in Download mode (press vol up and down same time and connect phone to PC)
- Open QFIL program and select flat build
- In select programmer you select prog_emmc_firehose_8936.mbm
- In load xml i selected rawprogram_unsparse and path0
- After that you click download and wait like 4 min and when say finish succesfully you start phone manually
I hope this helps.
Click to expand...
Click to collapse
I was not doing the 8936.mbn part!
By default it is 8916 so it doesnt work. but after changing that setting, it work!:highfive::good:

I can't unbrick
Hi!
I have a Lenovo Phab PB1-770M, this phone won't turn on, only Lenovo logo, or fastboot or flashmode.
With Flashtool i can't flash. In Fastboot i flash a recovery or operating system, i reboot the phone and again only the Lenovo screen, operating system not starting.
What can i do?

naeemdurrani said:
man dont use Qfil program.
the rom which you downloaded should be in zip format, unzip it, there is a file download_with_partiotion.bat.
run it and sit back until it is finished.
Click to expand...
Click to collapse
this is what i get running the .bat command >
'adb' is not recognized as an internal or external command,
operable program or batch file.
╟δ╚╖▒ú╩╓╗·─▄╣╗╩╢▒≡adb╔Φ▒╕!╟δ╓╪╩╘úí
please ensure the phone can distinguish adb devices! Please retry!
Press any key to continue . . .

Lenovo K6 VIBE No OS Installed, Only TWRP but can't find stock ROM

Hello guys I hope you had a good day.
I recently tried to root my device but it didn't work and got into a loop boot. Later I wiped /system and /cache and some other important parts [Because of my lack of experience with phones] , Now the phone is OS-Less. I tried to search for a Stock ROM for 3 days but couldn't. Now I just have TWRP. What should I do? I just want anything that works right now, no specific needs.
EDIT: I also have Fastboot installed as well.
Thanks for helping me.

That's why you always do a backup before doing such dangerous things, bre. You should be ok by following @firemax13 "restore to factory state" guide https://forum.xda-developers.com/general/rooting-roms/lenovo-vibe-k6-note-guide-rooting-t3602763 (of course you should jump the unroot part and start at "turn the phone to download mode".

c00kiie said:
Hello guys I hope you had a good day.
I recently tried to root my device but it didn't work and got into a loop boot. Later I wiped /system and /cache and some other important parts [Because of my lack of experience with phones] , Now the phone is OS-Less. I tried to search for a Stock ROM for 3 days but couldn't. Now I just have TWRP. What should I do? I just want anything that works right now, no specific needs.
EDIT: I also have Fastboot installed as well.
Thanks for helping me.
Click to expand...
Click to collapse
@c00kiie
Ok that's a huge problem for you try to restore your phone here's the link https://forum.xda-developers.com/general/rooting-roms/lenovo-vibe-k6-note-guide-rooting-t3602763
Scroll down until you see my post related to restore.....yeah we have a stock rom but the problem you can't flash it via twrp....i will reply the method to restore your phone...
hope you understand...pls dont forget to subscribe my thread and hit like if it is working....it if is not working just tell me
---------- Post added at 06:44 AM ---------- Previous post was at 06:41 AM ----------
c00kiie said:
Hello guys I hope you had a good day.
I recently tried to root my device but it didn't work and got into a loop boot. Later I wiped /system and /cache and some other important parts [Because of my lack of experience with phones] , Now the phone is OS-Less. I tried to search for a Stock ROM for 3 days but couldn't. Now I just have TWRP. What should I do? I just want anything that works right now, no specific needs.
EDIT: I also have Fastboot installed as well.
Thanks for helping me.
Click to expand...
Click to collapse
Here's the method from my xda friend hope you success it
RESTORE PHONE TO FACTORY STATE
source: https://forum.xda-developers.com/ge...ide-restore-stock-recovery-rom-6-0-1-t3599360
Click to expand...
Click to collapse
Reguired Files
First Download all required files from here http://goo.gl/Gfs1zf
Install Drivers in 2_Driver.rar
Install softwares in 3_Microsoft C.rar (For 64bit Windows install Both)
Phone : In Developer Options >
Code:
>Turn on USB debugging
>Enable Oem Unlock
1. Uninstalling Root
We must uninstall root (supersu) on the device. Select supersu app and tap the settings.
Access > Default Access > Grant and Full Unroot > Continue > Yes > Yes
The phone is restarting now. Check the supersu app not in drawer.
Shutdown the phone.
Click to expand...
Click to collapse
2. Turn Phone To Download Mode.
Hold down together the Volume Up + Power button for a while. Release power key after lenovo logo shows up. On the menu select download. Download Mode dont have any screen. Screen is blank but working.)
Connect phone to PC
Click to expand...
Click to collapse
3. Flashing Rom
Unrar 5_K53_S123_170216_ROW_STOCK.rar (Latest) or 5_K53_S116_161115_ROW_STOCK.rar (Testing OTA)
Unrar 4_QcomDLoader.rar Open folder. Click and open QcomDloader.exe
On Downloder Window Click load button. (First on top left)
Select the directory of the rom files (The directory numbered 5 which contains many img files) Click OK.
Click settings button. (Second on top left)
Dont change anything. I was pre entered the options. Check the values. If wrong, correct.
Code:
Manifacture Order: EMPTY (Important)
Download Mode: UPGRADE
Chipset: 8937
Downloaded Rom: CHECKED
eMMC Programmer: prog_emmc_firehose_8937_ddr.mbn
Raw Program: rawprogram0.xml
patch0: patch0.xml
Click OK.
Click Start button. (Third on top left)
Status becomes Downloading. Wait for a while. Flashing finishes around 400-500 seconds.
Status becomes Finish. Progress Passed.
Disconnect the phone. Close the Downloader on PC.
Press Power button 10 seconds on phone. Device is restarting.
Wait a few minutes. Phone will be opened to first install mode . In language selection screen Shutdown the phone by pressing power button.
Click to expand...
Click to collapse
4. Installing ADB
Install 1_adb-setup-1.3.exe to the pc. (Select > Yes > Yes > Yes > Yes. In the opened window click Install)
Click to expand...
Click to collapse
5. Locking the Bootloader.
Restart phone in fastboot mode. (Hold down power + Volume DOWN keys. Fastboot Mode appairs left top of the screen.)
Connect phone to PC
Adb directory now located in C Drive. Open adb folder. Open a command window here. (CRTL+SHIFT right click on empty space. Select Open Command Prompt Here)
Type:
Code:
fastboot devices
then press enter. (Your device must be listing like: s356d3a9 fastboot)
Type:
Code:
fastboot oem lock
(OKAY [ 0.031s] finished. total time: 0.031s)
Type:
Code:
fastboot oem device-info
Control all options are false.
Disconnect the phone. Restart phone by pressing power button 10 seconds.
Finished...
Click to expand...
Click to collapse
This rom contains no bloatware except Lenovo Help (a.k.a Lenovo Companion)
Hit likes if working.:good::good::good::good::good::good::good:
If your phone has a trouble just post a message here.
DO IT YOUR OWN RISK I WILL NOT HANDLE ANY BRICK BUT YOU CAN POST A MESSAGE TO ME

[ROOT][RECOVERY]Asus Zenfone Max ZC550KL Qualcomm Snapdragon 615 MSM8939

Guide for rooting and Twrp installation for Zenfone max ZC550KL 615 MSM 8939 :
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
FILES NEEDED
DRIVERS\TOOLS
a. adb setup; http://www.mediafire.com/file/jsbx6isfpgle319/adb-setup-1.4.3.exe
b. Android usb drivers ;http://www.mediafire.com/file/57fzehmcfqk0y7t/ASUS_Android_USB_drivers_for_Windows_20150212.zip
c.minimal adb and fastboot : http://www.mediafire.com/file/0h36wb7e8aoimvb/minimal_adb_fastboot_v1.3.1_setup.exe
d. Asus bootloader unlock tool for 8939 device : http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
TWRP\ROOT FILES
e. custom recovery image file (Twrp) :
https://www.mediafire.com/file/1kyk0q3b99kcrue/Twrp_3.0.2.img
f. SuperSU file (root) : http://www.mediafire.com/file/dchiph3qkml3u8g/PRO-SuperSU-v2.67.zip
STEP BY STEP GUIDE
1. Download and install adb and Android usb drivers if you don't have them already installed, otherwise, you can skip
2. Download and install minimal adb and fastboot and put icon on desktop
3. Download the Asus bootloader unlock tool .apk file to your device and install like an application in order to unlock bootloader(follow on-screen messages)
4. Boot device into CSC MODE(fastboot\bootloader) and connect to PC via usb cable. (To boot into CSC MODE , press and HOLD "volume up key+power key")
5. open minmal adb and fastboot and enter the following commands:
Code:
[COLOR="Red"]fastboot devices[/COLOR]
hit enter on keyboard and the serial number of your device SHOULD show in minimal adb window, if it does'nt then you've not installed your Android usb drivers correctly !
Code:
[COLOR="Red"]fastboot flash recovery[/COLOR]
after this command press the SPACE KEY ON KEYBOARD AND DRAG THE "CUSTOM RECOVERY IMAGE FILE TO THE MINIMAL ADB WINDOW then hit the enter key on your keyboard and Twrp will be flashed .
IMPORTANT !!
After flashing the TWRP file, you should boot directly into recovery by holding VOLUME DOWN+POWER BUTTON do not allow device to boot into home screen at first boot, otherwise stock recovery will be restored !!!
6. After booting into TWRP , FLASH THE ROOT FILE IMMEDIATELY !
WARNING !
if you don't flash the root file once in twrp, you might encounter a bootloop!
some users report a password prompt while in Twrp, just press "cancel" then go to twrp home screen , WIPE-FORMAT DATA, after formatting data , go back to twrp home screen -REBOOT-RECOVERY , after that flash the root file (make sure your root file is on an external sd card .

Just followed instructions word by word and successfully rooted my Asus Max SD 615 !
Thanks !:good:

Plez upload video..
Please upload video for how to root,twrp and adb installing..because i m a android beginner.

Nandha2335 said:
Please upload video for how to root,twrp and adb installing..because i m a android beginner.
Click to expand...
Click to collapse
Well i guess if you follow it step by step there won't be any problem.If you get stuck at some point just comment here.And installing adb is just like the normal installation of any setup files in windows.Regarding the flashing of twrp there is nothing much to do than the steps mentioned above.If you still need a video go for this.https://youtu.be/kmq2Eyzl3wA NOTE:This video makes use of files for the sd410 model,so don't use the files in that video.Get the files from this post.This video can make you familiarize the process,but steps mentioned here is slightly different.

Nandha
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..

Nandha
Thank u so much bro ..i m following as per u r procedure now my mobile was rooted ...

Nandha2335 said:
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..
Click to expand...
Click to collapse
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).

Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193

jide1 said:
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193
Click to expand...
Click to collapse
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Bro how to change notification panel ..and status bar

Nandha2335 said:
Miui 8 rom properly working or not
don't ask me, i didn't post any rom here, ask him https://forum.xda-developers.com/showthread.php?p=73339833
Click to expand...
Click to collapse

Nandha2335 said:
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Bro how to change notification panel ..and status bar
Click to expand...
Click to collapse
Try using gravity box after installing xposed framework.There a lot of graphical tweaks in gravity box.

Internal Storage Files Missing
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.

Place the root file on an external sd card.

jide1 said:
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.
Click to expand...
Click to collapse
Thank for your fast reply. By following your steps, I was successful in rooting the phone but when rebooting back to home screen, the black screen's still there.

kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
I guess you have copied the super su file to external sd card.Formatting data as mentioned by jide1 did remove the encryption for me.If it doesn't work do advanced wipe with only the data,cache and dalvik cache boxes checked.Note:don't check any other box.Then reboot into twrp.Go to mount in twrp and see that your external sd is mounted.Now access the external sd card in install option and you will find the files of super su.

How to get into twrp recovery?
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost

6goyal said:
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost
Click to expand...
Click to collapse
Flash twrp again ,disconnect usb cable from pc, then press and HOLD "volume down" AND "power button" when device vibrates, RELEASE "power button" WHILE still holding "volume down" , that should do the job.

Need stock boot.img
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.

Volker802 said:
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.
Click to expand...
Click to collapse
Download the official firmware from Asus website and unpack the zip file, and you'll see the boot.img file there.

help me out

hi im using nokia 6 Ta-1021 indian model with android 8.....i have to downgrade 7.1.2.... plz help me out with this clearly post with link plz anyone thanks in advance

magikavi said:
hi im using nokia 6 Ta-1021 indian model with android 8.....i have to downgrade 7.1.2.... plz help me out with this clearly post with link plz anyone thanks in advance
Click to expand...
Click to collapse
First thing first, everything you do will be doing on your own risk, these steps are working perfectly but still if anything happened, i will be not responsible for it:
Follow the steps carefully:
First down load the required files
1. Firmware and flashing tool to downgrade from here
https://forum.xda-developers.com/nokia-6/how-to/nokia-6-official-firmware-mena-region-t3664441
2. July to January [2018 naugat] OTA from here
Download the February oreo OTA also( in case if you failed to flash your device)
https://forum.xda-developers.com/nokia-6/how-to/updated-mirror-link-ota-monthly-updates-t3733784
3. This whole process will also required a sd card or memory card
4. The instructions to flash the device is available on the firmware thread that i provided you.
Now
Install the tool that you downloaded from the link
Put all the OTA zips ok the sd card and reboot your device to recovery
To put it into recovery, power off your device properly
Plug your charger, and wait to see the battery charging animation
Once you see the battery icon, press and hold the power key and volume plus button together
Once you see the android logo, release the power button but keep holding volume plus button teel you see a screen with "no command" written
When you see the screen no command screen
Just hit these three button together simultaneously
Power button+volume plus+home key(fingerprint sensor)
For 2-3 times
You will see the recovery menu
Now select the option, update from sd card
Select the December OTA from sd card
Now it will give you error but it will change some files and nougat recovery menu
Reboot your device, it will take you to direct recovery menu
Now
The instructions will be for OST tool and for mena firmware
Install OST tool
Now
1. Open ur directory, c:/program files x86/OST and replace the online update tool from there and delete the config file,
AND REMEMBER THIS IS VERY IMPORTANT,
2. Open online update tool from ur directory only, from c:/program files x86/OST only, donot start it from any shortcut created on desktop or from start menu, just start it from its original directory,
if it still gives error about microsoft error warning, try fresh replacing ur online update tool again from the zip
And start the program from there only, once it successfully started
3. Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 file and put ur phone into bootloader, click next button, now the first time u may stuck on flashing splash file and ur phone could restarted
4. Follow all the same steps again
5. Start the tool again
The tool will surely give u error for Microsoft.net
Dont panic
Close it and replace the file again
6. Remember no matter if replace the file before error, it will give error for one time surely
7. Replace it again with online updating tool and the start it from the directory
8. Now Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 ( your one could be CNxxxx) file and put ur phone into bootloader
9. Now connect it and click next this time your phone will get flashed successfully...if it give error again, then try one more time u will be successfully installed the mena firmware
After this your device could ask you to reset your device. Just do it.
Now one thing to remember
The