Related
. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/show....php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.
yargdpirate said:
OK so here's the list of instructions I'm using to root my Skyrocket:
I have completed everything through step 4. I completely do not understand what to do after that. So, like I'm a 40 year old soccer mom, can you explain what I'm supposed to do to fulfill step 5? Is it through the odin app on my pc? Is this completed on my phone? The link provided that ostensibly explains to noobs how to do this (http://forum.xda-developers.com/showthread.php?t=1777970) doesn't adequately explain to me what I'm doing and where.
Help, please!
Click to expand...
Click to collapse
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
CodeNameRedNeck said:
Assuming that you have successfully installed your custom recovery you then need to know which recovery you installed before you update it. If you used CWM you can get the updated version from the Skyrocket development thread. Put the updated CWM file on your SD card and flash that zip while in recovery. If you used TWRP you can update it through the app that it installed if it did install one. GooManager (someone correct me if I am wrong on the name) I think GooManager needs suoeruser privileges. So which recovery did you flash?
Click to expand...
Click to collapse
Put the updated CWM file on your SD card and flash that zip while in recovery?
Click to expand...
Click to collapse
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
yargdpirate said:
It's CWM. How do I
A. Put the updated CWM file on my SD card and
B. Flash that zip while in recovery? Is that through Odin, or what?
Thanks
Click to expand...
Click to collapse
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Vincom has a point. I taught myself through these forums and Google how to do it back in October of 2011. I flashed many a ROM and many files since then until I bricked mine Thursday. Now I have to pay 60 dollars to get it fixed. But on the upside I now have a Note II to play with.
Edit: She is asking for help though and she did ask in the right thread. Some people need more help than others.
vincom said:
i think you should stay on stock, read more b4 you brick your phone, no sense in rooting/installing custom roms when you dont know how to install a file on your scard, im not putting you down but trying to give you friendly advice
Click to expand...
Click to collapse
Oh. ****. I don't even want a custom ROM. I just want to be rooted and run stock with rooted google play store apps. Am I there?
I just want to run rooted apps with no ROM flashing...oh god why...where is the guide to root and only root?
You'd think this http://forum.xda-developers.com/showthread.php?t=1652398 would be where to go to do that, but evidently it's sending me down the road to custom ROM flashing. AGHGHGhjkdashbdas. Do not want.
Ok, so here's where I am, I have finished step 8:
1. Download Odin 1.85 .
2. Download(USE FIREFOX!) ClockworkMod TOUCH 5.5.0.4 OR TWRP 2.2.2.0, they are both named "recovery.tar.md5" and will be downloaded as "recovery.tar.md5", DO NOT CHANGE the filename or else it wont install.
3. Extract the contents of odin-185.zip to a folder.
4. Run Odin 1.85.exe from the folder you extracted it to.
5. Prepare Odin: Check "auto-reboot" and UNCHECK ALL OTHER OPTIONS. SEE COMPUTER SREEN PICS BELOW.
6. Only Click "PDA" and select the recovery.tar.md5 file you downloaded. SEE COMPUTER SREEN PICS BELOW.
7. How To Put your device into Download Mode: DO NOT TOUCH THE POWER BUTTON FOR THIS PROCEDURE. - download mode is NOT the same as recovery mode
a. Connect the USB cable to your PC, but NOT to your phone.
b. Remove the battery.
c. Reinsert the battery.
d. ATT PHONES - Press and keep down both Volume Up and Volume Down keys simultaneously.
ROGERS PHONES - Press and keep down only the Volume Down key.
DO NOT RELEASE THE VOLUME KEY(S) UNTIL INSTRUCTED TO DO SO IN STEP (f)
e. Insert the USB cable into your device. The phone will turn itself on when usb cable is inserted - DO NOT TOUCH THE POWER BUTTON.
f. You will now see a screen w/a yellow triangle warning you about installing a rom . Now release the volume key(s) - SEE PHONE PICS BELOW
g. Press and release the "Volume Up" key to enter into download mode - SEE PHONE PICS BELOW
h. You should now be at the Download Mode screen w/odin recognizing your phone. SEE COMPUTER SREEN PICS BELOW.
8. Click Start in Odin. It will flash the new recovery and will reboot the phone when completed. Your device will autoreboot into android. You are done using ODIN.
9. UPDATING CWM OR TWRP:
Now you need to udate CWM, download and copy cwm6027touch_v14.4.6_skyrocket.zip file to your sdcard, boot into recovery and choose "INSTALL FROM SDCARD" from recovery, install the file and reboot back into recovery to see if it installed correctly.
sk8erwitskil's CWM thread is here HERE , check to see if above file is the latest or dl the "Flashable zip" CWM file from there.
If upgrading TWRP go here HERE and follow the dev's instructions on using goo app, or you can use the flashable TWRP 2.4.1.0 file HERE and copy that file to your sdcard, boot into recovery and pick "INSTALL" from recovery, install the file and reboot back into recovery to see if it installed correctly.
How to enter recovery read section #2 below.
How to use cwm read THIS, also read Q&A on recoveries
You can upgrade to either CWM OR TWRP from which ever recovery TAR file you used in ODIN in step #2 from above.
10. You're done newbie and soon to be a power user, read and educate yourself as much as you can before flashing, happy flashing.
Click to expand...
Click to collapse
I don't know how to do step 9. Do I even need it? I have no desire to run a custom ROM.
For just rooting u have to run the superuser zip through your recovery
Oh and if you are not understanding what the stickies are saying to do then look it up on youtube because there are a lot of step by step instructions there.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
droidbabyxda said:
a. put updated file in your micro sd card.... plug ur micro sd card to pc... drag file and drop it in your micro sd card. put the micro sd card back in phone.
b. to go to recovery press power button + vol+ + vol- all at once and hold.
why do u need to unlock play store app? playstore is accessible completely even without root. you can also sideload Amazon appstore and other apps without root. no need to get all bricked up just to run playstore. i'm confused what are you trying to do again?
Click to expand...
Click to collapse
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
vincom said:
im guessing he wants to run apps from play that require root, eg titanuim backup, but he doesnt know how to put a file on his sdcard, but then he has to learn how to install zips from recovery which someones got to teach him since he doesnt want to read/learn/search for the answers. he seems to be impatient and wants it done "now", its a brick waiting to happen, my advice to him was to slowdown and learn
Click to expand...
Click to collapse
agree and such bad attituted too. i wouldn't want to help anybody who cusses in every conversation geez little respect goes a long way
It you just want to root and not want to flash any custom ROMs or anything related to it,I will tell you how to from total beginning
ALL DATA WILL BE LOST , BACKUP EVERYTHING
In order to root Android 4.2 the following three requirements must be satisfied beforehand:
The Android SDK, which you can download from Google Developers
A custom recovery like ClockworkMod (CWM) or Team Win Recovery Project (TWRP)
SuperSU, which you can download from CF-Root
There are no major differences between the two, but TWRP is more touch-oriented thanks to larger buttons. CWM is also available in a touch-compatible variant, but it has much smaller buttons. It's a matter of personal preference between the two though, but you have to choose one.
Before starting the process I urge you to perform a backup, as all data might be lost afterwards. You can copy the contents of the SD card to a safe external location such as cloud storage service or computer hard drive.
The first step that needs to be performed after all the files are downloaded is to install the Android SDK. Afterwards open the Android SDK Manager and select the following two items:
Android SDK Platform-tools -- it contains the required programs to install Android 4.2 Jelly Bean
Google USB Driver -- it contains the necessary drivers for the Nexus device
Then you should create a folder in an easily accessible location within the command line. In this example I will use a folder named "Root" in my C:\ drive in Windows. The path name will therefore be: "C:\Root".
From the folder where Android SDK Platform-tools is installed (in my case it is "C:\Program Files x86)\Android\android-sdk\platform-tools" copy the following files to the previously created "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
The following files must also be copied to the "Root" folder:
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery that you previously downloaded for your specific device (please see below)
For my 8 GB nexus 7 wifi(codename "grouper" I will use TWRP with the name "openrecovery-twrp-2.3.1.0-grouper.img".
You can easily find the codename for your devoice by looking into Google
The custom recovery file differs for each device, please make sure you download the correct file
In order to make the process smoother for instance the SuperSU file can be renamed to "root.zip" and the custom recovery to "customrecovery.zip". It's a matter of convenience, but for accuracy I will stick to the original naming for this guide.
If the previous steps are completed you must have the following six files in your "Root" folder:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
CWM-SuperSU-v0.97.zip -- SuperSU file
The custom recovery. In my case it is "openrecovery-twrp-2.3.1.0-grouper.img"
From there, you can proceed to install the drivers for "fastboot mode". To install them, follow these steps:
Power off your Nexus device.
Press and hold Volume Up and Volume Down then press and hold the Power button; the device will now enter "fastboot mode".
Go to Device Manager (Computer -> Properties -> Device Manager in Windows 7/8) and identify the device; for me it shows up as Android 1.0.
Right click Android 1.0 and select "Update Driver Software," then select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer," then click "Next".
From "Have Disk..." option go to the folder where you have Google USB Driver installed (for me it's "C:\Program Files .(x86)\Android\android-sdk\extras\google\usb_driver" and select "android_winusb.inf".
Out of the three options select "Android ADB Interface" and validate any future warning window to install the driver.
Final preparations
Everything is prepared in order to start the installation process, but in order to do so a command window must be opened. Windows Key + R opens "Run"; type in "cmd" and the command window appears. Typing "cd C:\Root" and pressing Enter sets the "Root" folder as the working directory. Pressing the Shift key and right clicking inside the "Root" folder will also deliver the same result.
The device must be turned on in "fastboot mode" which I have explained at step no.2 during the driver installation process, and obviously plugged-in to the computer. You then have to type in the following commands while in "fastboot mode":
fastboot devices -- this is just for verification purposes; if there is no listed device then the drivers have been improperly installed and steps 1 through 7 must be redone.
fastboot oem unlock -> you have to accept the prompt in order to continue -- this command will unlock the bootloader, but it will also erase the data on the device which is why a backup is necessary.
fastboot reboot-bootloader -- this will reboot the bootloader.
fastboot flash recovery openrecovery-twrp-2.3.1.0-grouper.img -- this will flash the custom recovery --please use the specific file and name for your particular Nexus device!
fastboot erase cache -- this will erase the cache -- might not be necessary but it's just as a precaution.
fastboot reboot -- this will reboot the device.
After Android 4.2 is loaded and running the SuperSU file must be copied from the "Root" folder to the internal storage (shows up in Windows Explorer as a Nexus device). A simple copy and paste will do the trick here.
Then you have to power off the Nexus device and enter "fastboot mode" again. Use the Volume Up and Volume Down keys to navigate until you can select "Recovery Mode". After the power button is pressed the device will reboot in the new custom recovery.
Rooting your Nexus device
If you have ClockworkMod installed, you have to perform the following steps:
Select "install zip from sdcard"
Select "choose zip from sdcard"
Select "0" (zero) folder
Select "CWM-SuperSU-v0.97.zip"
Select "Yes - Install CWM-SuperSU-v0.97.zip"
Select "Go Back"
Select "reboot system now"
If you have Team Win Recovery Project installed, you have to perform the following steps:
Press "Install".\
Select "CWM-SuperSU-v0.97.zip" -- for me it's in the "0" (zero) folder
Swipe to confirm flash
Press "Wipe cache/dalvik" (just as a precaution)
Swipe to wipe
Press "Reboot System"
After Android 4.2 loads your device can run apps with elevated privileges (meaning it's rooted). A SuperSU app is installed in order to allow root requests, so please use your judgement on which apps you grant access.
If you experiences any problem, please reply and I will look into it.
Sent from my Nexus 7 using xda app-developers app
Sent from my Nexus 7 using xda app-developers app
^^you want him todo that, lmao, he doesnt even know how to put a file on his sdcard to flash it in recovery, theres no way a computer newb is going to be able to follow what you posted
That's why I have not used the word flash anywhere, I know that he does not know how to flash , I have posted the right thing for a total noob,( at least if he knows how to use command in windows or install drivers)
I helped him in the way I could and what he requested
Sent from my Nexus 7 using xda app-developers app
You think that helped. LOL. Your telling him to do things that aren't even required to gain root with this device. Not everything is a nexus bro. Next time you wanna help study up on the phone your giving advice about. lol
Well , thanks for telling me that every android isn't rooted in same manner, I was thinking that all devices are rooted in same ways like for my nexus
Sent from my Nexus 7 using xda app-developers app
naman14, im not putting you down, your step by step howto is admirable, good work, but the problem is that the op is clueless on tech stuff, its not the word "flash" he has a problem with, i could of said "install" and it would lead to same conclusion, he doesnt know how to copy a file to his sdcard, if he cant do that he has no business in modding his phone until he learns more. anyhow the op is long gone by now
I upgraded my samsung skyrocket s2 version 2.3.6 to 4.0.4 through the Kies. Then I tried to install TWRP 2.2.0 and Odin 1.85. I saw COM 14 ; COM 17 when I hit start button .It said
FAILED. Now it showed a yellow triangle in the middle of phone & monitor pictures. ( including : Firmware upgrade encountered an issue . please select recovery mode in Kies & try again). Please help . Thank you very much.
I just tried other laptop . I saw COM 3 but it said it couldn't open the serial (COM )port . All thread completed (success 0/ failed 1)
Hello,
I'm a mega noob. Now that's out of the way I posted a question on tomshardware about a broken tablet. I was directed here when ASUS replied to my question. They said to hold the Power Button and the Volume Down button, if I got there then upload the firmware. I don't know the middle part though! So I see a screen with three options. The first one says "RCK", the second one is the Android Logo with the Android name below, finally there's a box with an arrow coming out pointing at a little android guy and the words "Wipe Data". What should I select, what should I do next?
It is running Android 4.2.1 stock, never unlocked
The tablet was working just fine until one day it got stuck on the loading screen and stayed at the screen. If I can fix it, It's mine!
Thank You,
Fast replies are appreciated.
First off, what is your problem? Also, whatever you do, DO NOT SELECT "WIPE DATA" OR YOU WILL BRICK!!!
Is your bootloader unlocked?
Edit
I updated the my Post with more information.
McGirk242 said:
I updated the my Post with more information.
Click to expand...
Click to collapse
I suggest downloading the firmware from Asus website and downloading the correct firmware. Take care as there are two different versions of the tablet TF300T and TF300G. Once you have downloaded the firmware place it on your SD card. Reboot into the three icon screen and press RCK menu and install/flash the downloaded firmware. If you would like to unlock and root the tablet then I can help you with that too.:good:
Yes you can try the above method to re-flash the stock firmware, however once you have downloaded the firmware zip before you put it on your microSD you will need to unzip this firmware zip and you will find a second zip inside - and this is the zip file that you need to put on your microSD card.
As stated above you can then boot to your bootloader screen and select the RCK which on stock will boot to the stock recovery which will be a green android which should then show a blue progress bar under the green android - let it complete and then the tab should reboot and be all good.
If it does not work you will see the android laying on it's back with chest open - if this is the case you can try the fastboot method to flash the system blob which seems to work even with a locked bootloader - link to my how-to can be found in my sig below, if you need help with any steps just let me know.
A few questions
pjc21 said:
Yes you can try the above method to re-flash the stock firmware, however once you have downloaded the firmware zip before you put it on your microSD you will need to unzip this firmware zip and you will find a second zip inside - and this is the zip file that you need to put on your microSD card.
As stated above you can then boot to your bootloader screen and select the RCK which on stock will boot to the stock recovery which will be a green android which should then show a blue progress bar under the green android - let it complete and then the tab should reboot and be all good.
If it does not work you will see the android laying on it's back with chest open - if this is the case you can try the fastboot method to flash the system blob which seems to work even with a locked bootloader - link to my how-to can be found in my sig below, if you need help with any steps just let me know.
Click to expand...
Click to collapse
So I need to unzip the file from ASUS.com when it's on the MicroSD before or after? Do I put the file on the internal or on an external SD Card? What is the zip file in the zip file called? Thank You, you guys have brought me one step closer to ending this thing.
McGirk242 said:
So I need to unzip the file from ASUS.com when it's on the MicroSD before or after? Do I put the file on the internal or on an external SD Card? What is the zip file in the zip file called? Thank You, you guys have brought me one step closer to ending this thing.
Click to expand...
Click to collapse
I usually download the firmware to the PC first as sometimes these tablets seem to have issues downloading large files.
Which firmware version are you wanting flash/install?
When you download the firmware it will be called, depending on which firmware version - TF300T-WW_epad-10_6_1_15_3-UpdateLauncher.zip
Unzip this to a folder and inside you will find another zip called WW_epad-user-10.6.1.15.3.zip - Copy this zip file to your microSD.
With microSD in tab reboot to bootloader - hold vol- & power - In bootloader menu "vol-" is to move between what icon is highlighted.
"vol+" is to select/execute what is highlighted.
Highlight the "RCK" icon and select.
The tablet should now boot to the stock recovery which should a black screen with a green android with a blue progress bar underneath. This should take between 5-10 minutes to complete and then the tablet should reboot. If so the tablet should boot up to the setup wizard to setup the tab, Done. :good:
If this is not the case and you get a green android laying on it's back with it chest open and I think a red explanation icon it has not worked. I would then try the fastboot method of flashing the system blob. Have a look at my how-to in the sig below for details on this method, you will also need fastboot installed on the pc first - Installing android sdk and updating it to the android version your wanting to flash should also install fastboot and adb drivers.
If the first method does not work and you need help with the second just let me know.
Hi all.
I am all new within android systems.
I am trying to upgrade a hauwei u8860 - but i am stuck getting the boot loader option when i startup the device.
I have read several guides on how to put on a new version of android and many of those uses clockworkmod, but i guess i am missing some recovery image for getting this active - i keeep on getting the pre installed recovery console with no bootloader option available.
Pleae can some one tell ,me what i am missing to get clockworkmod recovery console active ?
Download CWM recovery image from here
https://www.dropbox.com/s/jw87ma6yvqmodgx/u8860-recovery-6.0.1.0-touch.7z
visler said:
Hi all.
I am all new within android systems.
I am trying to upgrade a hauwei u8860 - but i am stuck getting the boot loader option when i startup the device.
I have read several guides on how to put on a new version of android and many of those uses clockworkmod, but i guess i am missing some recovery image for getting this active - i keeep on getting the pre installed recovery console with no bootloader option available.
Pleae can some one tell ,me what i am missing to get clockworkmod recovery console active ?
Click to expand...
Click to collapse
Thanks alot
I have now downloaded the fil, but i need some info on where to place it and if it need to be unzipped before move to the phone
visler said:
Thanks alot
I have now downloaded the fil, but i need some info on where to place it and if it need to be unzipped before move to the phone
Click to expand...
Click to collapse
Although i m not an expert.. but here the process
1) download the file ..
2) unzip it on ur pic
3) in the unzip folder u will see a recovery.img file
4) Now disocnnect the USB cable from phone (if any)
5) Shutdown the phone
6) Now press VOLUME + and Volume - and Power button together .. this will take u a PINK SCREEN
7) Now connect the phone to pc via USB cable .. in ur PC u will be able to see a new disk drive .. which will contain recovery.img file already
8) for backup up purpose rename the recovery.img in the newly mounted disk driver to recovery.org (or something else)
Now the final thing
9) Copy the recovery.img from your unzipped folder to mounted drive ..
Take out battery and u r done
Now U can enter in CWM recovery by press volume+ and power (i not sure.. chk forum)
Again tx alot, i will try it later - here on windows 8 pc everything is ok, pink screeen starts and pc detects new device and install some drivers, but no new drive is showing at the pc when the "driver install window" closes
visler said:
Again tx alot, i will try it later - here on windows 8 pc everything is ok, pink screeen starts and pc detects new device and install some drivers, but no new drive is showing at the pc when the "driver install window" closes
Click to expand...
Click to collapse
I m not sure why .. but trying removing SD Card and try .. let me know if it worked :good::good::good:
1st way :
Pulled full OTA file for Lenovo Vibe Shot - z90a40 ROW
Installation Procedures for the official rekaveri following:
Clean, not rutirovannaya and the changed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the file update.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select English and tychem to Install update.zip
What follows is some question about the installation. Select YES
The installation process is 100% dlitelnyy.Posle installation still some time to think. Do not panic.
After installation is complete, select the restart system . The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
2nd way :
How to install TWRP rekaveri for the following:
Installed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the archive TWRP_lenovoota.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select Install and update the file with.
Make wipes are cache, dalvik-cache, data and phone.
After installation is complete, reboot the system. The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
down load files : https://cloud.mail.ru/public/36qb/qhqsDGNVr
3rd: for who have problem with 1st & 2nd
1- download thise file :http://lenovo-forums.ru/topic/19311...363_160625_row/?do=findComment&comment=497835
2- Installing the firmware using QFIL on the Lenovo device based on Qualcomm chips:
(A)
We set vcredist_x86.exe , which go in the complete set with "proshivalschikom" itself;
set himself "flasher" - QPST.2.7.422.msi ;
install drivers for the Qualcomm chips - they are in the archive Qualcomm_USB_Drivers.7z
(B)
Completely turn off your device , and then we press the volume up key (Volume Up), and holding it connect the USB-cable which is already connected to the USB 2.0 port of your PC - in the Device Manager, you should see the device Qualcomm Lenovo HS-USB QDLoader 9008
3-Just install the firmware: -
(A)
Run the program QFIL
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn)
, for this click on Knop «the Browse» , in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then choose prog_emmc_firehose_89XX.mbn file and click "Open" . then click on digging "the Load the XML ..." , alternately choose in the window that opens - first rawprogram0.xml and click "Open", and then patch0.xml and also click "Open".
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-76252800-1419253051.png
(B)
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
The device should restart at the successful process of filling the firmware and boot into Android OS.
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-39327800-1419253052.png
for root :::::::::
1ST : Unlock BootLoader
1. Install the software package QPST and drivers LenovoUsbDriver , QualcommUSBDrivers on your computer ( drivers are archived Service QPST programs )
2. Unpack the archive Z90a40_Android-L_unlock_7M.7z to the root of any drive.
3. Connect the device ( Z90a40 ) to a PC via USB-cable.
4. On your device, turn on debugging by the ADB .
5. Run the utility QFIL :
- in the line Select Build Type , select the Flat the Build
- in line Select Programmer press the button Browse and specify the path to the unzipped files \ Z90a40_unlock_7M \ the img \ prog_emmc_firehose_8936.mbn
- click on the button Load XML and select the first rawprogram0.xml and then patch0.xml
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-1.png.661990ee862f9d3e35653a046c561c4a.png
6. Run Reboot_QDLoader.bat::
http://lenovo-forums.ru/uploads/mon...7M_3.png.3018b3c020fc59cdab5e8b73461cc42e.png
7. In the main program window to see that the device is switched to the mode Qualcomm HS-USB QDLoader 9008 .
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-2.png.a73fc14b40f138b5a2fa71480a6df072.png
8.Start the process of firmware bootloader unlocked by pressing the button Download .
(If you have not defined QFIL utility device Qualcomm HS-USB QDLoader 9008 mode, then you should check through the Device Manager on your PC - there are no problems with Qualcomm driver)
9. At the end of the process unlocked bootloader firmware to the device you will see a sign in the window Status QFIL program the following lines:
Download Succeed
the Finish Download
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-3.png.3a5566b24283b342edc285b724004305.png
10.Turning off the device from the USB-cable and clamp button Power to turn on the device (sometimes takes up to 10-20 seconds).
11. Open the main settings menu, the device and go to the " About phone -> Device Information " and press 7 times to select " Build number " until the display shows that you have become a developer.
12. Go back to the device's main Settings menu and go to the " For Developers " in " Factory Unlock " switch the toggle switch in the ON state .
13.Turn off the device (Z90a40), we press both volume buttons and connects to a PC via a USB-cable (the device enters the mode fastboot ), then run Unlock_Bootloader.bat
You should see the value of true if the secondary Bootloader check the status in the string the Device unlocked :
(Bootloader) Device tampered: false
(Bootloader) Device unlocked: true
(Bootloader) Charger screen enabled: false
(Bootloader) Display panel: A
OKAY [0.046s]
finished. total time: 0.046s
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-4.png.49581f68c35fd8e8922eaef936037988.png
14.So all of this unlocking process is completed successfully .
files need links :
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56368
2nd: to do ( install TWRP 3.0.2.0 for Lenovo Vibe Shot )
Extract the folder TWRP archive TWRP-3.0.2.0_Z90a40_by_SevenMaxs.7z to the root of any drive
Turn off the device ( Z90a40 ), we press both volume buttons and connects to a PC via a USB-cable; the device will go into fastboot mode (on the PC must be set for the driver ADB).
Connect your phone to a PC via usb-cable, and run the Flash-TWRP.bat ( the Run-TWRP.bat for a single run TWRP.)
We are waiting for the phone to boot into TWRP
You can now disconnect the usb-cord
Installation is finished!
links : http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56391
Login or TWRP:
On the device is turned off hold down both volume buttons and the inclusion of produce, release the power button immediately once the device is turned on and the volume buttons once away; boot logo TWRP.
3rd : install su from twrp
su.zip link : https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=sharing
4th: install xposed.zip ( the erorrs have been solved)
link :
soooooooooooooooooooooon
soz for error happen before
updated 23/8/2016
that's all
Everything is fine, but TWRP in Russian how to change it to English?
xposed mode is not installing
in TWRP its said that I/O error on system folder.
MOD EDIT: Please don't quote the OP
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
Click to expand...
Click to collapse
Root successful :good:
but I cant able to xposed framework
because in TWRP its says "cp: can't stat "/system" I/O error"
---------- Post added at 03:49 AM ---------- Previous post was at 02:51 AM ----------
cant able to install xposed framework tried everything
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
xposed worked with me and now erorr
sorry for that but it solved try agine
since root of the rom I tried about hundred times but still xposed framework not installed ?
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
yasirriaz1977 said:
since root of the rom I tried about hundred times but still xposed framework not installed ?
Click to expand...
Click to collapse
Try new zip
shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Click to expand...
Click to collapse
All work now
elbhrawy said:
Try new zip
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
yasirriaz1977 said:
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Click to expand...
Click to collapse
I will upload now
elbhrawy said:
I will upload now
Click to expand...
Click to collapse
eagerly waiting for xpposed to work on my charmed device
yasirriaz1977 said:
eagerly waiting for xpposed to work on my charmed device
Click to expand...
Click to collapse
Updated
elbhrawy said:
Updated
Click to expand...
Click to collapse
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
yasirriaz1977 said:
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
Click to expand...
Click to collapse
its worked with me
elbhrawy said:
its worked with me
Click to expand...
Click to collapse
but its not worked for me, please do something
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
i have problem with update
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
il_milanese said:
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
Click to expand...
Click to collapse
use qfil better
I have the bootloader unlock and TWRP installed,
the TWRP recovery let me know that i have no SO installed.
how can I install/flash a rom without brick the phone with this recovery installed?
Things to mustnt do with TWRP installed?
i've been 2 days without phone(bricked). I need help
Thank you
a bit confussing cause the english not too good, look like translated from other language.
can somebody fix it?
so can i have root with marsmallow?
Thank U.
OTA update v363 Ok. Thank U.
Folks,
I recently bought a Honor 8 and was trying to unlock the bootloder, install twrp and supersu by following the link below
https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-install-twrp-t3554789
As stated in the link above, I got to the steps to install supersu. However, on following step 12, it has formatted the data and now the phone is in a bootloop(stuck on the blue screen showing HONOR label)
I'm guessing my phone will not boot up since the OS has been erased. Could someone please help me restore this phone to back to the stock firmware and steps needed to do so. I am new to Honor phones, so not sure what I need to do and steps needed. Would appreciate any help if possible??
1. Boot into TWRP
2. Once there, when asked to keep system read only? - swipe to allow modifications
3. Tap Install
4. Tap Select Storage - Select your SD card
5. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
6. Swipe to confirm flash
7. Ignore the multiple errors: "Failed to mount '/data' (Invalid argument)
8. Go back to the main menu
9. Select Reboot to Recovery
10. When asked to keep system read only? - swiped to allow modifications (again)
11. Tap Wipe
12. Tap Format Data
13. Type YES then hit enter
14. It will format data using make_ext4fs..
15. When finished, tap Reboot System
16. Reboot back into TWRP
17. Swipe to allow modifications (You can check the box to never show this again)
18. Tap Install
19. Select storage
20. Select your SD card
21. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
22. Swipe to confirm flash
23. You should see NO ERRORS now when installing SuperSU
24. Wipe cache/dalvik
25. Swipe to wipe
26. Reboot system
Download the rollback and marshmallow firmware package from honors website. Rename the rollback package to "UPDATE.APP" and place it in a folder called "dload" in your micro SD card. Put the micro SD in your phone, and boot into the firmware update screen (volume up + volume down + power all at the same time). Once it's done, delete the old UPDATE.APP file from the dload folder, rename your marshmallow firmware package to "UPDATE.APP", place it in the dload folder on your micro SD card, place the micro SD in your phone, and again flash the firmware using volume up +volume down +power
Since you still have access to the SD Card via USB, you can just download your firmware, extract it and put the UPDATE.APP in a dload folder on a microSD card and press all 3 buttons when starting up the phone to start installing the OS again.
Appreciate the feedback. I tried going to the below website to pick up the rollback package and the firmware( Android 6.0)
http://www.hihonor.com/us/support/search-result/index.html?keywords=Honor%208%20Firmware
My question is that is it possible to just restore it back to android nougat(7.0) in the U.S or has the 7.0 not released for the U.S markets yet?
I found the following link below for the Android 7.0(Nougat) firmware for Honor 8 but not sure if this work on the phones bought in the U.S
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
Appreciate your feedback on this..
Since the phone is in bootloop, I would have to use a different phone and it's SD card slot to download the firmware and then put it on the Honor 8. I'm guessing the rollback process would only apply if I wanted to go back to the Marshmellow firmware. My question though is would I be able to restore it back to Android Nougat(7.0) if possible.
I found the following link below for the Nougat(7.0) firmware. Not sure if this will work on the U.S phones. Is there a different process to restore it back to Nougat?
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
You can try just getting the nougat firmware onto your micro SD, then pressing volume up + volume down + power to see if it works. Worse case scenario is that you'll get an error.
If you do get an error, your can try the rollback procedure. Once you get marshmallow running you can always just update back to nougat with OTA.
Oh yeah, you don't necessarily need another phone. Just get a micro SD card adapter and plug it into your computer, then transfer the files into the dload folder
---------- Post added at 07:37 PM ---------- Previous post was at 07:34 PM ----------
You can use the following link for marshmallow firmware. Again, you can always update to nougat later using OTA
https://forum.xda-developers.com/honor-8/development/models-stock-firmware-packages-honor-8-t3501942
thanks for the info..just another clarification. The nougat firmware I found online was a zip file that included 3 files(attached snapshot) . I noticed one of the files is the UPDATE.APP.
My question is on creating the new dload folder do I need to remove the other two files or just copy all of 3 files in the dload folder before I try to restore the phone back.. Sorry if it's a straight-forward question, but I just want to make sure I'm doing this right.
Much thanks...
Just the UPDATE.APP
What are the other 2 files? Just curious
there is a folder called : META-INF which has some files in it and also a file called: full_mainpkg.tag which is only a 1KB file so maybe that's inconsequential.
Did you try out the procedure yet? The META-INF folder should not be necessary. You can always try the method with and without the folder included if you really need to.
I did...it did do the update following the steps you mentioned and it seems everything went fine as far as the update is concerned. I didn't get any errors, but once the phone rebooted it is still stuck on the blue screen with the Honor logo on it
Have you tried the rollback procedure as well?
---------- Post added at 04:16 AM ---------- Previous post was at 04:08 AM ----------
If neither procedure worked, you can try another procedure which involves extracting SYSTEM.IMG, BOOT.IMG, RECOVERY.IMG, and CUST.IMG from the UPDATE.APP file, then flashing all of them through fastboot, and finally preforming the rollback procedure again.
was finally able to get the phone to reboot and load the firmware. It does seem that there is some issue with the keyboard now as it's only showing OK google as the keyboard so I don't have a keyboard anymore. Not sure how to go around this. Also the phone seems a little laggy and unresponsive at times which wasn't happening earlier. I'm thinking of trying the rollback method to see if that helps or improves the performance of the phone. Let me know of you have any suggestions. Thanks again for your help...
That's a known issue with the keyboard. For some reason it does not function correctly after a factory reset. The rollback should fix everything. Once you are back on marshmallow, just update back to nougat (if you want to) through OTA system update.
Edit: it might actually be easier to just perform a factory reset on the nougat firmware. I'm assuming your data was wiped through the procedure anyway, right?
I can do the rollback but I just realized that I have the 64GB version which is the FRD-L14
http://www.phonemore.com/huawei-honor-8/models/629
I'm not sure if there is a FRD-L14(64GB) variant of the MM firmware available anywhere. If so, I'm not aware of the link of the site to find it. Secondly, if I do install the FRD-L04(32GB) variant of the MM firmware would that create problems for the phone in upgrading and later trying to root and install custom ROM etc.
Much Thanks
The nougat firmware your flashed earlier, was it the L14 firmware? I would not flash a L04 firmware on a L14. Instead, you can probably flash the L14 nougat firmware (unless you already did) and then perform a factory reset
EDIT: Refer to this thread:
https://forum.xda-developers.com/honor-8/how-to/frd-l14-users-how-to-restore-downgrade-t3537433
The OP uploaded the correct L14 firmware files. Remember to first flash the rollback package, then the firmware.
the firmware I flashed earlier was the L14 firmware. I went to the link you mentioned above in your post. It's a little confusing as far as the exact steps that need to be followed as people seem to be adding/modifying steps. Would help if I could get a clear step process on how/what to follow.
Also, is it okay to flash the rollback package and then flash the nougat firmware package for L14 if I am currently on nougat(not fully functioning as mentioned in the posts above).
This link below from your reference thread has a few L14 firmware's. I had earlier picked up the first one from the list. Not sure if that's the correct one to flash..
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
Thanks again...
The rollback package is only used if you're downgrading from nougat to marshmallow. Otherwise, you don't need it. Since you were having some issues after flashing the nougat firmware, I would recommend that you rollback, and then update to nougat afterwards. Here's a step by step:
1. Get an micro SD card. Create a folder on it called "dload"
2. Download the F14 rollback package from the following link:
http://download-c.huawei.com/download/downloadCenter?downloadId=92098&version=360320&siteCode=us-h
Extract the UPDATE.APP file, and place it into your dload folder. Pace the micro sd into your phone
3. With the phone shut off, press volume up + volume down + power to flash the UPDATE.APP. Once it's done, shut down your phone and remove the sd card
4. Download the F14 Marshmallow firmware from the following link:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1201/g88/v66294/f1/full/update.zip
Extract the UPDATE.APP, and replace the old UPDATE.APP in the dload folder with the new one you just downloaded.
5. Place the micro sd into your phone. Repeat the button combination to flash it. Once it's done, shut down your phone.
6. Press volume up + power to boot into system recovery. Wipe the phone's data from this screen.
7. Boot into the phone. Go to settings -> About
Check to see if the model# etc is correct. If it is not, complete step 8. Otherwise go to step 9:
8. Download the following file:
http://update.hicloud.com:8180/TDS/...94/f1/full/hw/usa/update_data_full_hw_usa.zip
Extract the UPDATE.APP, place it in the dload folder, and flash it.
9. Boot into the phone. If you want to update to nougat, do the following:
Go to your dialer, and type *#*#2432546#*#*
This will force your phone to check for updates.
Then go to Settings -> Updater to update to nougat
I did follow your steps, but my keyboard has now vanished when the set up screen appears. It only shows google voice and I'm having trouble setting up my phone. Has anyone had the same problem. What can I do to get my keyboard back?
Note: my phone is unrooted. Not sure if that makes a difference