Good GA3 (Galaxy Ace 3) follower ! As I put in my post of Stock Kernel , I'm doing little things in Ace 3 Development. Today I bring you something else: Stock Recovery .
It is the recovery mode (vol up + home + power) that comes by default . With it, you can not install tweaks , mods or ROMs , only minor official updates from Samsung. Therefore, only serves to make factory resets, wipe cache and little else.
NOTES:
- It do not delete data from the mobile
- You need Odin
Instructions:
- Download Stock Recovery: http://www.mediafire.com/download/4e...k+Recovery.tar
- Open Odin v3.07
- Put the phone in download mode ( Vol down + Home + Power) , Volume Up to accept and connect it to your computer
- If you have connected successfully, one of the boxes ID : COM turns yellow or blue with the number of COM port. This step may take a few minutes, but usually takes a few seconds.
- Place the tar file ( Recovery) in the PDA box
.
- Check on the boxes ODIN " automatic restart " options F. Reset Time " are checked.
- Click on START in ODIN and wait for it to finish , it takes a few minutes.
- When the process is finished , the phone will reboot , and READY .
Enjoy the Stock Recovery!
PS: do not post elsewhere without giving credits or asking permission
Awsome work dude:good: it really helped me a lot:highfive:
Related
some of you get an error or hanging on superoneclick step6
or just with superoneclick.
KPE
this rooting package ( i found here: androidadvices.com/root-samsung-galaxy-sl-i9003-gingerbread-xxkpe-234-firmware/3/ ) is including cwm ,superuser and tweak manager
1. Download androidadvices.com/downloads/I9003XXKPE_RootingPackage.zip (rooting package)
:: extract - if it prompts you to enter in the password then enter the password as “androidadvices.com” without the inverted comas.
2. Start the Odin.exe
:: select the “CF-ROOT – I9003 – Beta.tar” file on the PDA-tab
3. Turn off and then on into download mode (hold buttons:
- volume down
- power
- home)
4. If Odin shows ID : COM press Start
5. finished root if it shows green field ;D
Some are reporting Kernel Panic Upload Mode (its the android bluescreen).
I have it after first time booting - take out battery to "ignore" these errors
KPH
this rooting package ( i found here: forum.xda-developers.com/showthread.php?t=1201062 ) is including the same like KPE
1. Download forum.xda-developers.com/attachment.php?attachmentid=710540&d=1315210336 (rooting package)
:: extract
2. Start Odin
:: select the downloaded file on the PDA-tab
3. Turn off and then on into download mode (hold buttons:
- volume down
- power
- home)
4. If Odin shows ID : COM press Start
5. finished root if it shows green field ;D
the kph doesnt contains kernel panic errors =)
well we are all focusing on things that are KPH and i dont think anyone has KPE installed.....but thanks
KPH added. testet on my new i9003 - works fine
hi. i had installed xxkpe and rooted using the file provided using the steps as mentioned by you. i face kernel panic. so i upgraded to xxkph and i do not face kernel panic but my phone randomly reboots itself and ends in a bootloop till i take the battery out. when i do, my phone does a soft reset and i lose all my data. can anyone help? this happens on kpe/kph and kpm alike.
when already we have cf root why to do all these un-necessary steps...?
Because it doesnt exist the mome.t i post it
Sent from my GT-I9003 using XDA App
I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
And for mod, please make sticky for this thread, so for Samsung owner can easily find it
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For smarphone : hold power button+menu button+volume down (vol -)
- For tablet : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
Credit goes to
@nasheich (For the tutorials)
@daerragh (For Usb Driver and Odin)
Thanks for ur reply, but in my case,device can't go into download mode,it only go in cwm recovery mode with all effort,
So what to do now?
zeeshantayyab said:
Thanks for ur reply, but in my case,device can't go into download mode,it only go in cwm recovery mode with all effort,
So what to do now?
Click to expand...
Click to collapse
if you can't go to the download mode, you should find other custom rom fir your device and flash it through recovery,
make sure it's custom recovery, not Recovery that came from the device(Samsung)
Samsung firmware sites has been fixed
I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For device with Menu button : hold power button+menu button+volume down (vol -)
- For device without Menu button : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
I wanna share my knowledge here
Learning from my experience using Samsung's devices, I found similarities in the way of reversing Samsung devices to stock rom.
So this guide should be practice for almost all Samsung devices
Ok, let's get started
First, download all these stuff
1. Samsung USB Driver or go to this Thread (install it)
2. Samsung Kies (install it)
3. Odin v.4xx or Odin v1-3 or go to this Thread (just open when need it)
4. And of course your stock rom
Download from here (choose the right stock rom and the newest depend on your model)
5. Extract the stock rom using winrar/7zip
-you should 3 files PDA_xx.tar.md5, Phone/Modem_xx.tar.md5 and CSC_xx.tar.md5 or more
-If you have just two files, .xxxx.tar.md5 & SS_DL.dll, i'll give it the guide too
Second, Go to download mode
- For device with Menu button : hold power button+menu button+volume down (vol -)
- For device without Menu button : hold power button+volume down (vol -)
For the 3 Files or more
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Choose PDA (browse it from your extracted stock rom)
- Choose phone/modem (browse it from your extracted stock rom)
- CSC (browse it from your extracted stock rom)
- If there's more files, just put it on the same box of the files names
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
For 2 files only
- Go to download mode
- Plug your device to PC/Laptop
- Open Odin
- Just choose PDA and browse it the file(forget about SS_DL.dll or XX.dll file)
- Check list auto reboot and f.reset time(look at the left)
- Click start and wait
- If success, should be writen "PASS" on left side
If there's something miss or wrong, please tell me, I'll fix it this ASAP
And Let's helping people
HI all,
I saw the need of reposting my post #282 (main ZOPO ZP999 thread) for people who want to root, flash recovery or for some reason lost control of their precious Zopo and want to regain it
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have noticed that the link sometimes is unavailable : Mod edit sales link removed
Therefore i post it here again : also THANKS TO JASPER===JG77 and Ghost45
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is what you have to do:
- Preferably use a Windows 7 (x32 or x64) system
- Download and install drivers http://www.4shared.com/rar/f0a9TeP8ba/Zopo_ZP999-3X_32-64bit.html
- Download the firmware and extract it (a stock ROM) http://www.zopomobileshop.com/content/9-download-zopo-mobile-latest-rom
- Download a recovery (I used CarlivTouch) http://www.4shared.com/file/xKa5nYyuce/recovery_CarlivTouch_30_ZP999.html
- Download SP Flashtool and extract http://www.4shared.com/zip/FlMUfELsba/SP_Flash_Tool_exe_Windows_v514.html
- Download SuperSu https://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
- Boot your phone and connect to your PC and copy the SuperSu zip to your SD (I used a micro SDcard and not phone storage)
- Disconnect and shutdown the phone
- Start SP Flashtool (as administrator)
- Click 'Scatter-Loading' and select the 'MT6595_Android_Scatter.txt' from the downloaded Firmware! Picture 1
- Remove all selections except (!) recovery
- Click on the location of the recovery
- Select the custom downloaded recovery file (in my case recovery_CarlivTouch_30_ZP999.img) Picture 2
- Remove the battery from your phone (DON'T CONNECT YET) (battery pull :not necessary i think...but does not harm )
- Make sure you see 'Download Only' in SP Flashtool and click the 'Download' button
- Now connect your phone to your computer and leave the battery out of it!
- Wait till you see a green sign Picture 3
- Disconnect your phone but the battery back in but (!) DON'T BOOT
- Connect the phone to a charger and wait till it shows the battery level
- Press the buttons Volume-Up and Power and hold them
- After the first Zopo screen release Power (I kept holding Volume-Up)
- If all is well you now see the custom recovery! (you can let go of the volume button ) (if it didn't work the first time because of wrong timing, just shut down again and retry)
- Immediately install the SuperSU ZIP file (install zip-> Choose zip from /storgage/sdcard1)
- When done choose reboot and if you get questions about fixing to keep the custom recovery and fix root, say YES
- Let it boot into Android and Check ROOT with f.e. rootchecker
- Go to Google Play Store and install Busybox (not necessary)
- Start Busybox and make sure you give it Root right (not necessary)
- Press Install, if it fails the first time do it a second time. You should see an OK message if all is well. (not necessary)
- Reboot your phone, and PRESTO, your phone is rooted.
If you would install MobileUncle Tools from Google Play Store you can see you are rooted. (Here you allways can go in recovery without any problems)
Thanksbutton appreciated
@raystef66,
New Zopo Official have taken new Forum of Zopomobileshop original first Zopo Forum.
So New threads are always here in Xda ...look for them.