Hi,
This is my first post in these forums so sorry if I break some rules or post in the wrong section. Anyway, as the title says I have flashed a custom ROM using Odin (CyanogenMod Nightly GT-N8013) on my N8010 since there is no N8010 official cm ROM and I went into download/Odin mode after and the binary counter still says official Samsung and there is no yellow triangle at boot? I am not saying this is a problem (I'm actually quite happy) but I was wondering does anyone else have this problem? (I have searched the forums and no joy)
P.S I even flashed twrp and update to the latest nightly almost every day still no counter
Sent from my GT-N8010 with CyanogenMod Nightly using Tapatalk HD
So, how is this a problem... I'd be jumping for joy....
Related
Hi all,
I was installing the stock 4.1.2 rom to my N8010 through odin3... but its been on halfway for the last hr now at "NAND Write start" obvs i cant unplug but am now worried its broke?
Any advise on what to do? sorry am a newbie
it does not take an hour to write there is some issue may be there is communication error or some issue with either USB port or something that is stopping Odin to write to the device.
I do not know what will happen if you unplug the usb port but that is the only option left.
What you can do is unplug
Restart you laptop
Exit Kies
Try installing again.
BTW what is the source of your firmware
If you bork your note 10.1, you can use kies / odin to get it back to factory.
Sent from my GT-N8013 using xda premium
Roms
Hi there...
My original rom comes from here: " sorry i cannot seem to post the link"
The SamMobile Firmware page N8010 ( which is my model)
*** SOLVED**
Hi there,
I have solved the problem.. it says to use Odin3 V3.0.7 which was freezing, i downgraded to the same Odin3 V3.0.4 that use for my Galaxy S3 and it has now installed perfectly...phew!!
I hope this will help anyone else in the same situation as me. Oh And Kies does not find my galaxy S3 or Note and it didnt locate my tablet either FYI
Ok good but it is strange to see kies not recognizing your devices that means there are some missing drivers not a good thing specially when u are flashing roms using it
What 4.1.2 for 8010 rom is this? Or is it the 8013 rom?
where is the link ?? to tell you which rom is
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
Got it yes you are right where did you get 4.1.2 rom for 8010 it is not out yet !!!!!!!!!!!!!!!!
Hi
I logged onto the samsung website....
http://www.sammobile.com/firmware/?page=8&view=8295
and in the search bar I typed N8010 and it brings up all available romz
sorry that should say 4.1.1....i was thinking of my Galaxy S3 I have also just upgraded to 4.1.2 what a "blonde"....apologies
Thats interesting because there are no 4.1.2 roms for the N8010 yet. I assume you are using a 8000/8013 rom, in which case do you know which one and how are you getting on with it?
The 8000 seems to work in flight mode, but according to other forums the 8013 won't even flash.
Sent from my GT-N8010 using Tapatalk HD
kimberwhitehead said:
Hi
I logged onto the samsung website....
http://www.sammobile.com/firmware/?page=8&view=8295
and in the search bar I typed N8010 and it brings up all available romz
sorry that should say 4.1.1....i was thinking of my Galaxy S3 I have also just upgraded to 4.1.2 what a "blonde"....apologies
Click to expand...
Click to collapse
Just a "heads up".
This is not THE Samsung website. Its A "Samsung enthusiast" site, with all the attendant caveats.
Z.
I have just noticed this ROM 'P6800ZCLPN_P6800OZHLPN_CHN.zip' on the Sammobile site. Its a stock ROM but there is no version number or other information. Any ideas what this might be. Thinking of flashing it using Odin but wondering if anyone else has tried it?
already being paosted about it 2-3 days ago... you can still read it on official firmware thread... still 4.0.4
Hello all,
I've seen this posted a few times either without resolution or a suggestion to reflash clean by wiping data, which did not work for me.
I originally rooted my tab via Odin on my PC when my tab was running 4.0.3 and then again when I updated to 4.0.4. Everything was fine. Then, when jellybean came out for the p3110, I flashed this via mobile Odin, it worked great, but I started seeing a corrupt display during boot for a second or two (green and light red vertical bars in a random pattern). I tried to get rid of this, but couldn't. I even flashed the official p3113 jellybean image from Samsung updates and it too has this boot corruption. Now I am on Cm 10.1, everything is working great, but I still have that annoying display corruption during boot.
Is there any way to fix this? My tablet is working fine, but I am worried about resale value.
Sent from my GT-P3110 using Tapatalk 2
I think we both have the same problem - look at my thread:
http://forum.xda-developers.com/showthread.php?t=2178196
Did you find a method to fix this bug?
Greetings,
Srynx
You need to flash a JB bootloader for your device. Method is in the first post CM10.1 thread in the 7-inch development section along with bootloaders for P3110 and P3100. There's a JB bootloader for the P3113 on post #1250 of that thread.
Look for the correct 51XX bootloader in the equivalent 10 inch Tab2 thread.
I thank you so much!
Greetings,
Srynx
wjptam said:
You need to flash a JB bootloader for your device. Method is in the first post CM10.1 thread in the 7-inch development section along with bootloaders for P3110 and P3100.
Click to expand...
Click to collapse
What if I flashed the JB bootlader (everything works fine with CM10.1) and then downgrade to an ICS ROM (4.0.4 with CSC DBT for example on Sammobile P3110XWBLH3 as PDA and P3110DBTBLH2 as CSC)?
Flashing to an official German ROM could be necessary for guarantee/warranty.
Will I have a bricked P3110?
It took me a bit of searching to find the correct thread, since there are quite a few CM 10.1 threads in the dev section!
I'm posting the correct thread in case anyone else has this issue:
Beginning of thread:
http://forum.xda-developers.com/showthread.php?t=2052290
Link to post with link to file to download:
http://forum.xda-developers.com/showpost.php?p=38592520&postcount=1250
Plasmabruzzler said:
What if I flashed the JB bootlader (everything works fine with CM10.1) and then downgrade to an ICS ROM (4.0.4 with CSC DBT for example on Sammobile P3110XWBLH3 as PDA and P3110DBTBLH2 as CSC)?
Click to expand...
Click to collapse
Okay, the question could be a bit difficult
I have read the thread http://forum.xda-developers.com/showthread.php?t=1722745 but it still won't help me.
What should I do if I have a JB-based ROM (with a JB bootloader) and want to downgrade to an official ICS ROM which I can find on Sammobile? Do I have to flash the firmware normally with ODIN (1-part firmware as PDA) or do I have to flash an ICS-bootloader before/after? Or is the bootlader in Sammobile's firmware included or do run ICS ROMs with JB-bootloaders?
wjptam said:
You need to flash a JB bootloader for your device. Method is in the first post CM10.1 thread in the 7-inch development section along with bootloaders for P3110 and P3100. There's a JB bootloader for the P3113 on post #1250 of that thread.
Look for the correct 51XX bootloader in the equivalent 10 inch Tab2 thread.
Click to expand...
Click to collapse
I can confirm this works for me. I was having trouble flashing with Odin earlier... My windows XP VM kept crashing and rebooting every time I tried. I finally updated virtual box and that seemed to do the trick. My boot time seems much faster now and I see no corruption at all. Thanks!
Sent from my GT-P3110 using Tapatalk 2
it works for me to i was looking a long time to solve this thanks!!
I had stock 4.0.4 and i flashed stock 4.1.2 for my p3100. I see the glitch on startup - should I flash this bootloader for JB too? Is it safe and will it work with my rom version?
Hi,
Apologies if this has been asked countless times but I've done a quick search and found nothing relating to recovery with the NG8 build.
I have rooted the device but cannot access the stock recovery. The blue writing comes up when I boot but then the device powers down.
I'm in the UK on T-Mobile with the GT-I9505 version, Android 4.4.2, build NG8.
Is there a fix for this? I am contemplating putting a custom recovery on but want to make sure that's not going to brick the device on this particular build.
I've seen a lot of posts about the MF3 version having a locked bootloader but not the NG8 so just want some clarification please.
Many thanks.
Chris
Bud, i think you meant to post this in the Galaxy S 4 forum, this is galaxy s 4g (sgh-t959v)
Hi All
Just little advice required if you can help.
Had my GT-N8010 for maybe 3 years now and not done any flashing for a long time.
Currently running custom rom Android revolution HD9.0 which is 4.1.2
Have got hold of N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar which i believe is offical stock rom?
Can i just flash this with ODIN and will it work ok.
Will it update the bootloader for KitKat ??
Thanks
Sorry for posting in the wrong section