Database Info

[Q] Corrupt screen during boot p3113

Hello all,
I've seen this posted a few times either without resolution or a suggestion to reflash clean by wiping data, which did not work for me.
I originally rooted my tab via Odin on my PC when my tab was running 4.0.3 and then again when I updated to 4.0.4. Everything was fine. Then, when jellybean came out for the p3110, I flashed this via mobile Odin, it worked great, but I started seeing a corrupt display during boot for a second or two (green and light red vertical bars in a random pattern). I tried to get rid of this, but couldn't. I even flashed the official p3113 jellybean image from Samsung updates and it too has this boot corruption. Now I am on Cm 10.1, everything is working great, but I still have that annoying display corruption during boot.
Is there any way to fix this? My tablet is working fine, but I am worried about resale value.
Sent from my GT-P3110 using Tapatalk 2

I think we both have the same problem - look at my thread:
http://forum.xda-developers.com/showthread.php?t=2178196
Did you find a method to fix this bug?
Greetings,
Srynx

You need to flash a JB bootloader for your device. Method is in the first post CM10.1 thread in the 7-inch development section along with bootloaders for P3110 and P3100. There's a JB bootloader for the P3113 on post #1250 of that thread.
Look for the correct 51XX bootloader in the equivalent 10 inch Tab2 thread.

I thank you so much!
Greetings,
Srynx

wjptam said:
You need to flash a JB bootloader for your device. Method is in the first post CM10.1 thread in the 7-inch development section along with bootloaders for P3110 and P3100.
Click to expand...
Click to collapse
What if I flashed the JB bootlader (everything works fine with CM10.1) and then downgrade to an ICS ROM (4.0.4 with CSC DBT for example on Sammobile P3110XWBLH3 as PDA and P3110DBTBLH2 as CSC)?
Flashing to an official German ROM could be necessary for guarantee/warranty.
Will I have a bricked P3110?

It took me a bit of searching to find the correct thread, since there are quite a few CM 10.1 threads in the dev section!
I'm posting the correct thread in case anyone else has this issue:
Beginning of thread:
http://forum.xda-developers.com/showthread.php?t=2052290
Link to post with link to file to download:
http://forum.xda-developers.com/showpost.php?p=38592520&postcount=1250

Plasmabruzzler said:
What if I flashed the JB bootlader (everything works fine with CM10.1) and then downgrade to an ICS ROM (4.0.4 with CSC DBT for example on Sammobile P3110XWBLH3 as PDA and P3110DBTBLH2 as CSC)?
Click to expand...
Click to collapse
Okay, the question could be a bit difficult
I have read the thread http://forum.xda-developers.com/showthread.php?t=1722745 but it still won't help me.
What should I do if I have a JB-based ROM (with a JB bootloader) and want to downgrade to an official ICS ROM which I can find on Sammobile? Do I have to flash the firmware normally with ODIN (1-part firmware as PDA) or do I have to flash an ICS-bootloader before/after? Or is the bootlader in Sammobile's firmware included or do run ICS ROMs with JB-bootloaders?

wjptam said:
You need to flash a JB bootloader for your device. Method is in the first post CM10.1 thread in the 7-inch development section along with bootloaders for P3110 and P3100. There's a JB bootloader for the P3113 on post #1250 of that thread.
Look for the correct 51XX bootloader in the equivalent 10 inch Tab2 thread.
Click to expand...
Click to collapse
I can confirm this works for me. I was having trouble flashing with Odin earlier... My windows XP VM kept crashing and rebooting every time I tried. I finally updated virtual box and that seemed to do the trick. My boot time seems much faster now and I see no corruption at all. Thanks!
Sent from my GT-P3110 using Tapatalk 2

it works for me to i was looking a long time to solve this thanks!!

I had stock 4.0.4 and i flashed stock 4.1.2 for my p3100. I see the glitch on startup - should I flash this bootloader for JB too? Is it safe and will it work with my rom version?

4.2.2 rom to 4.1.2

Hi,
Sorry if asked before!!
But i'm new to the root stuff of a samsung tab.
So if im going to a 4.2.2 rom and it doesnt satisfied me, can i go back to a 4.1.2 rom without any problems?
Thanks

Yes.

Is there a specific 4.3 rom for the Samsung Galaxy Tab 3 SM-T210(R)?

From what I understand 4.3 has color emojis for Samsung devices and that's mainly what I want from it or Kitkat

DHeavy2011 said:
From what I understand 4.3 has color emojis for Samsung devices and that's mainly what I want from it or Kitkat
Click to expand...
Click to collapse
No, there is not an official 4.3 ROM. There is some 4.4.2 ROMs but they are still in development.

DevMyAndroid said:
No, there is not an official 4.3 ROM. There is some 4.4.2 ROMs but they are still in development.
Click to expand...
Click to collapse
Thanks. I didn't think so but on the roms page it has all the Jelly Bean roms together so I didn't know if one happened to be 4.3. I am aware of the Kitkat roms still being under development and I hope one finally becomes completely stable or at least useable. Best case scenario is an official Kitkat update from Samsung but I have little doubt of that. It'd be nice even if they skipped Kitkat but gave us Android L but that's even less likely. I've tried the Kitkat roms here and they just didn't cut it for me. I am happy with a 4.2.2 rom that I found when I tried to find a stock rom. It said stock rom on it for the SM-T210 but it wasn't stock at least for the SM-T210, as it was running 4.2.2 compared to the real stock 4.1.2. The wifi didn't work but I found an easy fix

DHeavy2011 said:
Thanks. I didn't think so but on the roms page it has all the Jelly Bean roms together so I didn't know if one happened to be 4.3. I am aware of the Kitkat roms still being under development and I hope one finally becomes completely stable or at least useable. Best case scenario is an official Kitkat update from Samsung but I have little doubt of that. It'd be nice even if they skipped Kitkat but gave us Android L but that's even less likely. I've tried the Kitkat roms here and they just didn't cut it for me. I am happy with a 4.2.2 rom that I found when I tried to find a stock rom. It said stock rom on it for the SM-T210 but it wasn't stock at least for the SM-T210, as it was running 4.2.2 compared to the real stock 4.1.2. The wifi didn't work but I found an easy fix
Click to expand...
Click to collapse
I tried that rom. It is a port of the stock firmware on another device. I wish the development had not been discontinued.

DevMyAndroid said:
I tried that rom. It is a port of the stock firmware on another device. I wish the development had not been discontinued.
Click to expand...
Click to collapse
theres a stable kitkat rom, ive been using it for a few days

multigamer120 said:
theres a stable kitkat rom, ive been using it for a few days
Click to expand...
Click to collapse
You mean the port KitKat? it's not stable yet.

What's not stable? I've been using it with no issues.
Sent from my SM-T210 using XDA Free mobile app

Pls Help Me
Had restored my tablet. And then start something the TWRP custom recovery and accidentally turn off the tab. Then I wanted to turn back and not even doing a hard reset lights or anything. Nor on when I connect the charger. My tab is dead. I need help
Samsung GALAXY TAB 3 10.1

DevMyAndroid said:
No, there is not an official 4.3 ROM. There is some 4.4.2 ROMs but they are still in development.
Click to expand...
Click to collapse
Found a 4.4 rom!!!!! http://forum.xda-developers.com/galaxy-tab-3/development-7/rom-port-nolekat-v1-0-t210r-t2837338

all ports will have bugs at the start but they will be sorted in due time

JoseLeonhart said:
Had restored my tablet. And then start something the TWRP custom recovery and accidentally turn off the tab. Then I wanted to turn back and not even doing a hard reset lights or anything. Nor on when I connect the charger. My tab is dead. I need help
Samsung GALAXY TAB 3 10.1
Click to expand...
Click to collapse
I am assuming you flashed stock on odin. When you flash back to stock, your tab will always use the recovery installed to flash what i think is the kernel. All you need to do is, make sure your tablet is off. (It may be trying to boot without any lights.) Once it is off, hold down power, volume down, and home. Wait 4 seconds and relese the power buton but keep holding volume down and home for 2 seconds. Then let go of all the buttons, press volume up and connect your tablet to your computer. You should now be able to use odin to flash stock firmware.

[Q] looking to going to Kitkat need help

I haven't done this in a while so could use some help. I'm currently rooted on Jb 4.1.2 sungsonic HD by adi. My model # says it's on gt-p3100 but I'm sure it really is gt-p3113. Question is can I just flash a new 4.4.2 or 4.4.4 rom or do I have to do something with Odin before I could start flashing Kitsap rooms? Thanks for any help

funtimez said:
I haven't done this in a while so could use some help. I'm currently rooted on Jb 4.1.2 sungsonic HD by adi. My model # says it's on gt-p3100 but I'm sure it really is gt-p3113. Question is can I just flash a new 4.4.2 or 4.4.4 rom or do I have to do something with Odin before I could start flashing Kitsap rooms? Thanks for any help
Click to expand...
Click to collapse
You need to first and foremost determine the exact model# of your tab. After that you will need to update your recovery to the absolute latest whether its CWM, TWRP or Philz and them you can flash one of the new KK 4.4.x ROMs of your choice. The big thing for you is the correct model# Get that wrong and its all down hill from there. Get your new recovery from here:http://forum.xda-developers.com/showthread.php?t=2548257 After that grab any ROM They are all great IMHO. Good Luck

Thanks. I got it to work yesterday with help from Android andi

GT-N8000 dead after upgrade to 4.4.2

Hi everyone
I'm an old fan of your forum
I hope you can help me
I had rooted N8000 with 4.1.2 jellybean
then suddenly it rebooted and stock on Samsung logo
I surfed XDA then I downloaded 4.4.2 to my device then I upgraded it via Odin
It didn't booted up since it couldn't complete the upgrading
how can I get it back to life
thanks alot
I'm sorry for wasting your time