Hi all,
I was installing the stock 4.1.2 rom to my N8010 through odin3... but its been on halfway for the last hr now at "NAND Write start" obvs i cant unplug but am now worried its broke?
Any advise on what to do? sorry am a newbie
it does not take an hour to write there is some issue may be there is communication error or some issue with either USB port or something that is stopping Odin to write to the device.
I do not know what will happen if you unplug the usb port but that is the only option left.
What you can do is unplug
Restart you laptop
Exit Kies
Try installing again.
BTW what is the source of your firmware
If you bork your note 10.1, you can use kies / odin to get it back to factory.
Sent from my GT-N8013 using xda premium
Roms
Hi there...
My original rom comes from here: " sorry i cannot seem to post the link"
The SamMobile Firmware page N8010 ( which is my model)
*** SOLVED**
Hi there,
I have solved the problem.. it says to use Odin3 V3.0.7 which was freezing, i downgraded to the same Odin3 V3.0.4 that use for my Galaxy S3 and it has now installed perfectly...phew!!
I hope this will help anyone else in the same situation as me. Oh And Kies does not find my galaxy S3 or Note and it didnt locate my tablet either FYI
Ok good but it is strange to see kies not recognizing your devices that means there are some missing drivers not a good thing specially when u are flashing roms using it
What 4.1.2 for 8010 rom is this? Or is it the 8013 rom?
where is the link ?? to tell you which rom is
---------- Post added at 09:58 PM ---------- Previous post was at 09:55 PM ----------
Got it yes you are right where did you get 4.1.2 rom for 8010 it is not out yet !!!!!!!!!!!!!!!!
Hi
I logged onto the samsung website....
http://www.sammobile.com/firmware/?page=8&view=8295
and in the search bar I typed N8010 and it brings up all available romz
sorry that should say 4.1.1....i was thinking of my Galaxy S3 I have also just upgraded to 4.1.2 what a "blonde"....apologies
Thats interesting because there are no 4.1.2 roms for the N8010 yet. I assume you are using a 8000/8013 rom, in which case do you know which one and how are you getting on with it?
The 8000 seems to work in flight mode, but according to other forums the 8013 won't even flash.
Sent from my GT-N8010 using Tapatalk HD
kimberwhitehead said:
Hi
I logged onto the samsung website....
http://www.sammobile.com/firmware/?page=8&view=8295
and in the search bar I typed N8010 and it brings up all available romz
sorry that should say 4.1.1....i was thinking of my Galaxy S3 I have also just upgraded to 4.1.2 what a "blonde"....apologies
Click to expand...
Click to collapse
Just a "heads up".
This is not THE Samsung website. Its A "Samsung enthusiast" site, with all the attendant caveats.
Z.
Related
Hi all,
I am new to this forum and i am really expecting some help from you guys.
Samsung recently launched ICS update for galaxy S2 in INDIA and i have been trying to update my phone via Kies but every time when kies is done with all the downloads and this screen called "Downloading...Do not turn off the Target" comes on the phone the phone gets disconnected and Kies gives the message that it cant detect the phone and i should remove battery and restart, whereas phone get stucks at that same Downloading message screen.This problem comes over and over again and everytime i restart my phone it starts normally with my 2.3.6 firmware.
What can be the possible cause and solution for this?
Sent from my GT-I9100 using XDA
Hey
1 of all....Kies damn sucks
I think you should go to http://www.sammobile.com/firmware/ and search for I9100
scroll down and take the ics 4.0.3 for india
Flash it via odin and it should work
if you dont have any experience with odin search here in teh xda for an tutorial
Tell me if it worked
i.s.s.w said:
using Odin
oh on Middle East
no available Arabic
Samsung supports very slow working
Click to expand...
Click to collapse
Jaaap :/
Ok I have the same problem. Only I checked the performance monitor for network activity, and there's a process; kiespdlr.exe that's actually downloading, but it's been like this for a while now, and there's no progress bar or anything so I don't know if the phone's actually frozen or not!! Should I wait or restart the phone?
Pleaaaaase help!! I'm scared stiff that I might brick my phone!! I just bought it!!
Stuck in Preparing firmware upgrade
When i tried to update my galaxy s2 from 2.3.3 to ICS the kies downloaded the firmware but stuck in the preparing firmware upgrade components.
please help me
supersayan1000 said:
When i tried to update my galaxy s2 from 2.3.3 to ICS the kies downloaded the firmware but stuck in the preparing firmware upgrade components.
please help me
Click to expand...
Click to collapse
Dont worry
follow the instructions in the link ill post below if there are any questions post a reply if it worked hit thanks
http://forum.xda-developers.com/showthread.php?t=1706918
i.s.s.w said:
using Odin
oh on Middle East
no available Arabic
Samsung supports very slow working
Click to expand...
Click to collapse
True
Sent from my GT-I9100 using xda premium
i've searching for this for a while but i cant seem to find anything.
i just want to know if there is a way to root my gtab 2 7.0 wifi gt-p3113 without odin?
there are ways for android phones and i just wanted to know if there is a way available for the tab as well.
once again i've been searching and looking around and i can't seem to find a thread talking about this.
(i found this thread: http://forum.xda-developers.com/showthread.php?t=1891544&highlight=root but it really doesn't give an answer)
Then use heimdall
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
Then use heimdall
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
the reason i ask is because i don't want to increase odin count.
im guessing this does that as well correct?
Yes but you could use triangle away app 1.95 from google play (paid) or from these forums (free) it will reset the counter to zero by just a press of a button in 1 second no need to worry about counter with this app i used it to reset counter of my phone and tab
http://forum.xda-developers.com/showthread.php?t=1494114
Then if you want to keep counter at zero state use app mobile odin to flash it will not increase the counter or use the triangle away app again !!!
http://forum.xda-developers.com/showthread.php?t=1347899
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
Yes but you could use triangle away app 1.95 from google play (paid) or from these forums (free) it will reset the counter to zero by just a press of a button in 1 second no need to worry about counter with this app i used it to reset counter of my phone and tab
http://forum.xda-developers.com/showthread.php?t=1494114
Then if you want to keep counter at zero state use app mobile odin to flash it will not increase the counter or use the triangle away app again !!!
http://forum.xda-developers.com/showthread.php?t=1347899
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
hey thanks a lot! now another question my build number is UEBLH2 and i cant seem to find a way to root that build. could you help me on that?
Whatever the build number is , it has no effect in rooting
The determining factors are the model number as 3100,3110 or 3113 and the android version you are in now as 4.0.3 or 4.0.4 or 4.1.1
See this
http://forum.xda-developers.com/showthread.php?t=1880010
http://forum.xda-developers.com/showthread.php?t=1722304
http://forum.xda-developers.com/showthread.php?t=1788625
http://forum.xda-developers.com/showthread.php?t=1791193
http://forum.xda-developers.com/showthread.php?t=1741404
Please read the threads fully before applying and choose the right files or you could BRICK the tab
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
Whatever the build number is , it has not effect in rooting
The determining factors are the model number as 3100,3110 or 3113 and the android version you are in now as 4.0.3 or 4.0.4 or 4.1.1
See this
http://forum.xda-developers.com/showthread.php?t=1880010
http://forum.xda-developers.com/showthread.php?t=1722304
http://forum.xda-developers.com/showthread.php?t=1788625
http://forum.xda-developers.com/showthread.php?t=1791193
http://forum.xda-developers.com/showthread.php?t=1741404
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
then i should just follow the first link that you shared with me and download the second to the last file which has CWM recovery with root as well, correct?
because the second link seems like i would have to do more than one thing, lol
sorry if im asking to many questions, i just dont want to brick my tab.
plus you are being very very helpful!
Thanks if you could tell me the model number and android version i could better choose the right tutorial for you?
you should follow only one tutorial and read it fully with comments and choose the right files for your model number as 3113 (do not mix files from multiple links)
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
Thanks if you could tell me the model number and android version i could better choose the right tutorial for you?
you should follow only one tutorial and read it fully with comments and choose the right files for your model number as 3113 (do not mix files from multiple links)
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
GT-P3113 Android Version 4.0.4
http://forum.xda-developers.com/showthread.php?t=1788625
Please read carefully every word in the thread including comments before applying
Please download the correct cwm for 3113 not any other device
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
http://forum.xda-developers.com/showthread.php?t=1788625
Please read carefully every word in the thread including comments before applying
Please download the correct cwm for 3113 not any other device
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
i really appreciate you helping me.
it talks about a tar file and i cant seem to find it in the thread.
I think this is the tar file needed for you device
http://teamhacksung.org/download/samsung/GT-P3113/GT-P3113_ClockworkMod-Recovery_6.0.1.0.tar
Install kies first or samsung drivers for tab to be recognized by odin then reboot and close kies before using odin
To open odin right click on the exe file and choose run as administrator
Please again read full comments in the post before applying
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
I think this is the tar file needed for you device
http://teamhacksung.org/download/samsung/GT-P3113/GT-P3113_ClockworkMod-Recovery_6.0.1.0.tar
Install kies first or samsung drivers for tab to be recognized by odin then reboot and close kies before using odin
To open odin right click on the exe file and choose run as administrator
Please again read full comments in the post before applying
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
thank you thank you thank you very much!!!!!!!!!!!!
all i want is JB on my tab, lol
Hey Guys,
I've just purchased a Galaxy tab 2 P3110 (7.0) and i would like to root the device, and put Cyanogenmod 10 or 10.1 on it, as this is christmas present for a close relative and want the added features Cyanogen offers. I already have this installed on a Samsung S3.
I've seen quite a few different guides on the forums and other websites, all with differing ways to root the device and install custom ROM, can someone please provide a recommended guide to follow.
Check the 7 tab development thread.
Basically you need to download a program named Odin and use it to flash the proper cwm recovery to your tab. Then you boot that recovery to install the rom. You don't need to root, rooting is only if the rom you use is not rooted, like stock rom etc. You also don't need to unlock the bootloader or anything like that.
Sent from my GT-P5110 using Tapatalk 2
Querying instructions for Rooting Samsung Tab 2 P3110
Nutsonfire said:
Check the 7 tab development thread.
Basically you need to download a program named Odin and use it to flash the proper cwm recovery to your tab. Then you boot that recovery to install the rom. You don't need to root, rooting is only if the rom you use is not rooted, like stock rom etc. You also don't need to unlock the bootloader or anything like that.
Sent from my GT-P5110 using Tapatalk 2
Click to expand...
Click to collapse
Dear Nutsonfire,
Thanks for your response i'm still conflicted about which instructions to use, some are saying make sure you download samsung kies, and the drivers etc..... before running ODIN, and some don't even mention it.
Heres what i've looked at so far... can you clarify as i definetly dont want to brick this
http://www.ibtimes.co.uk/articles/406710/20121120/samsung-galaxy-tab-p3100-install-cwm-recovery.htm
or
http://forum.xda-developers.com/showthread.php?t=2018386
theplague6t7 said:
Hey Guys,
I've just purchased a Galaxy tab 2 P3110 (7.0) and i would like to root the device, and put Cyanogenmod 10 or 10.1 on it, as this is christmas present for a close relative and want the added features Cyanogen offers. I already have this installed on a Samsung S3.
I've seen quite a few different guides on the forums and other websites, all with differing ways to root the device and install custom ROM, can someone please provide a recommended guide to follow.
Click to expand...
Click to collapse
This link may help you
It contain rooting method as well as method to flash cyangenmod
http://forum.xda-developers.com/showthread.php?t=1722745
theplague6t7 said:
Dear Nutsonfire,
Thanks for your response i'm still conflicted about which instructions to use, some are saying make sure you download samsung kies, and the drivers etc..... before running ODIN, and some don't even mention it.
Heres what i've looked at so far... can you clarify as i definetly dont want to brick this
http://www.ibtimes.co.uk/articles/406710/20121120/samsung-galaxy-tab-p3100-install-cwm-recovery.htm
or
http://forum.xda-developers.com/showthread.php?t=2018386
Click to expand...
Click to collapse
Kies is just so that you have the correct usb drivers so that your device is recognized by windows. You can also just install the drivers stand alone or Kies.
get odin and the file from the chainfire topic on the dev section
flash it and voila
quite simple, purchased mine last week and already flashed a lot of things
Amongst a slur of guides to rooting your Galaxy Tab 2 7" 3110, this video helped my a lot.
https://www.youtube.com/watch?v=R0v62o9W7oY
He goes in-depth on a lot of things that confused me, so hopefully it will help you!
(I was having trouble with the youtube plugin)
RorixRebel said:
get odin and the file from the chainfire topic on the dev section
flash it and voila
quite simple, purchased mine last week and already flashed a lot of things
Click to expand...
Click to collapse
Hey Guys,
Thanks for all your great help so far.
Not sure if this is applicable but figured i would check before i do it. I've noticed on my device its listed as a P3110, but on a few of the instructions and the CF-AUTO root its listed as model number GT-P3110, from what i have its a plain tab 2, without phone.
theplague6t7 said:
Hey Guys,
Thanks for all your great help so far.
Not sure if this is applicable but figured i would check before i do it. I've noticed on my device its listed as a P3110, but on a few of the instructions and the CF-AUTO root its listed as model number GT-P3110, from what i have its a plain tab 2, without phone.
Click to expand...
Click to collapse
yeah we just drop the GT- from the front of the model name as a sorta shorthand the 3 Models for the 7" (not counting the verizon that uses a different model number string) are the GT-P3100, GT-P3110 and GT-P3113 and the 10.1" versions replace the 3 at the beginning with a 5 so they are GT-P5100, GT-P5110 and GT-P5113 they are the same thing whether they have the GT in front or not, its just quicker to not type it out everytime.
BRILLIANT
daniel644 said:
yeah we just drop the GT- from the front of the model name as a sorta shorthand the 3 Models for the 7" (not counting the verizon that uses a different model number string) are the GT-P3100, GT-P3110 and GT-P3113 and the 10.1" versions replace the 3 at the beginning with a 5 so they are GT-P5100, GT-P5110 and GT-P5113 they are the same thing whether they have the GT in front or not, its just quicker to not type it out everytime.
Click to expand...
Click to collapse
Thank you guys for all your brilliant help the last few days, hopefully i can return the favor when it comes time to other people asking the some questions
I got 10.1 up and going nicely took less than 10 minutes to get it all happening
Hello all,
I've seen this posted a few times either without resolution or a suggestion to reflash clean by wiping data, which did not work for me.
I originally rooted my tab via Odin on my PC when my tab was running 4.0.3 and then again when I updated to 4.0.4. Everything was fine. Then, when jellybean came out for the p3110, I flashed this via mobile Odin, it worked great, but I started seeing a corrupt display during boot for a second or two (green and light red vertical bars in a random pattern). I tried to get rid of this, but couldn't. I even flashed the official p3113 jellybean image from Samsung updates and it too has this boot corruption. Now I am on Cm 10.1, everything is working great, but I still have that annoying display corruption during boot.
Is there any way to fix this? My tablet is working fine, but I am worried about resale value.
Sent from my GT-P3110 using Tapatalk 2
I think we both have the same problem - look at my thread:
http://forum.xda-developers.com/showthread.php?t=2178196
Did you find a method to fix this bug?
Greetings,
Srynx
You need to flash a JB bootloader for your device. Method is in the first post CM10.1 thread in the 7-inch development section along with bootloaders for P3110 and P3100. There's a JB bootloader for the P3113 on post #1250 of that thread.
Look for the correct 51XX bootloader in the equivalent 10 inch Tab2 thread.
I thank you so much!
Greetings,
Srynx
wjptam said:
You need to flash a JB bootloader for your device. Method is in the first post CM10.1 thread in the 7-inch development section along with bootloaders for P3110 and P3100.
Click to expand...
Click to collapse
What if I flashed the JB bootlader (everything works fine with CM10.1) and then downgrade to an ICS ROM (4.0.4 with CSC DBT for example on Sammobile P3110XWBLH3 as PDA and P3110DBTBLH2 as CSC)?
Flashing to an official German ROM could be necessary for guarantee/warranty.
Will I have a bricked P3110?
It took me a bit of searching to find the correct thread, since there are quite a few CM 10.1 threads in the dev section!
I'm posting the correct thread in case anyone else has this issue:
Beginning of thread:
http://forum.xda-developers.com/showthread.php?t=2052290
Link to post with link to file to download:
http://forum.xda-developers.com/showpost.php?p=38592520&postcount=1250
Plasmabruzzler said:
What if I flashed the JB bootlader (everything works fine with CM10.1) and then downgrade to an ICS ROM (4.0.4 with CSC DBT for example on Sammobile P3110XWBLH3 as PDA and P3110DBTBLH2 as CSC)?
Click to expand...
Click to collapse
Okay, the question could be a bit difficult
I have read the thread http://forum.xda-developers.com/showthread.php?t=1722745 but it still won't help me.
What should I do if I have a JB-based ROM (with a JB bootloader) and want to downgrade to an official ICS ROM which I can find on Sammobile? Do I have to flash the firmware normally with ODIN (1-part firmware as PDA) or do I have to flash an ICS-bootloader before/after? Or is the bootlader in Sammobile's firmware included or do run ICS ROMs with JB-bootloaders?
wjptam said:
You need to flash a JB bootloader for your device. Method is in the first post CM10.1 thread in the 7-inch development section along with bootloaders for P3110 and P3100. There's a JB bootloader for the P3113 on post #1250 of that thread.
Look for the correct 51XX bootloader in the equivalent 10 inch Tab2 thread.
Click to expand...
Click to collapse
I can confirm this works for me. I was having trouble flashing with Odin earlier... My windows XP VM kept crashing and rebooting every time I tried. I finally updated virtual box and that seemed to do the trick. My boot time seems much faster now and I see no corruption at all. Thanks!
Sent from my GT-P3110 using Tapatalk 2
it works for me to i was looking a long time to solve this thanks!!
I had stock 4.0.4 and i flashed stock 4.1.2 for my p3100. I see the glitch on startup - should I flash this bootloader for JB too? Is it safe and will it work with my rom version?
Hello every body
I have bough an verizon s3 sch i535 with android 4.3 i tryed to downgrade it but i always fail
Now its not working at all i receive an erreur which says firmware upgrade enccounted and assue
Please use software asisstant repair and try again.i tryed all the ways
Showen on the forum but i couldnt make it work.
Its only a gift i live in morocco and i cant trun it back to usa to be repaired
So please would you help me step by step
I tryed verizon assistant but it wont go over 83%
All my tries fails always plz help i got no phone noW
Stendhalmed said:
Hello every body
I have bough an verizon s3 sch i535 with android 4.3 i tryed to downgrade it but i always fail
Now its not working at all i receive an erreur which says firmware upgrade enccounted and assue
Please use software asisstant repair and try again.i tryed all the ways
Showen on the forum but i couldnt make it work.
Its only a gift i live in morocco and i cant trun it back to usa to be repaired
So please would you help me step by step
I tryed verizon assistant but it wont go over 83%
All my tries fails always plz help i got no phone noW
Click to expand...
Click to collapse
Bless your heart, I don't think that there's any way to downgrade to 4.1 from 4.3 without royally messing up your phone.
If I am wrong, someone please let me know.
Sent from my Samsung Galaxy Tab 4 8" model using Tapatalk
cindylike24 said:
Bless your heart, I don't think that there's any way to downgrade to 4.1 from 4.3 without royally messing up your phone.
If I am wrong, someone please let me know.
Sent from my Samsung Galaxy Tab 4 8" model using Tapatalk
Click to expand...
Click to collapse
Nope your right there isn't. Once your on 4.3 your on a locked BootLoader if you took the ota
And since they aren't or even can't send it back to the USA the only other option in the jtag service wouldn't be an option at this point
From my Wicked S3 on SOKP
So ur saying there is no going back to 4.3 even
How do i get my phone working i dont want it downgrade
ShapesBlue said:
Nope your right there isn't. Once your on 4.3 your on a locked BootLoader if you took the ota
And since they aren't or even can't send it back to the USA the only other option in the jtag service wouldn't be an option at this point
From my Wicked S3 on SOKP
Click to expand...
Click to collapse
Is there any way to get back to 4.3
Plz help i tried all the ways showen on the forum
I think that each incremental upgrade does something to the system to keep you from downgrading because everything that I've read on this makes it seem like it's more trouble than it's worth.
Now you can go to sammobile. com and search for the i535 rom and flash it on your phone.
Sent from my SCH-I535 using Tapatalk
cindylike24 said:
I think that each incremental upgrade does something to the system to keep you from downgrading because everything that I've read on this makes it seem like it's more trouble than it's worth.
Now you can go to sammobile. com and search for the i535 rom and flash it on your phone.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Can you plz show me how .cuz i have already dowbload it but it always keept failing
Is there a way to show me plz
cindylike24 said:
I think that each incremental upgrade does something to the system to keep you from downgrading because everything that I've read on this makes it seem like it's more trouble than it's worth.
Now you can go to sammobile. com and search for the i535 rom and flash it on your phone.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Stendhalmed said:
Can you plz show me how .cuz i have already dowbload it but it always keept failing
Is there a way to show me plz
Click to expand...
Click to collapse
If your on the 4.3 OTA it won't work when you use Odin. Your more than likely going to brick the phone that way. There's no way around it
From my Wicked S3 on SOKP
I think the OP is just trying to get back to 4.3 which is the condition in which he purchased the phone. You should be fine flashing through ODIN either one of the 4.3 full stock files (VRUCML1 or VRUCNC1) listed first in the first post of this thread:
http://forum.xda-developers.com/showthread.php?t=2653902
ShapesBlue said:
If your on the 4.3 OTA it won't work when you use Odin. Your more than likely going to brick the phone that way. There's no way around it
From my Wicked S3 on SOKP
Click to expand...
Click to collapse
whats do you mean by OTA i have bough it with android 4.3 and its
Not new its already usee i dont know if it has been upgrade or not
landshark68 said:
I think the OP is just trying to get back to 4.3 which is the condition in which he purchased the phone. You should be fine flashing through ODIN either one of the 4.3 full stock files (VRUCML1 or VRUCNC1) listed first in the first post of this thread:
http://forum.xda-developers.com/showthread.php?t=2653902
Click to expand...
Click to collapse
i have already downloaded on of them but i gy always
Fail wih odin something isnt right
I sow all the topics about this essue on the forum
And there one talking about fixing PIT
and i dont know if it is the probleme
Can u show me how to fix it