I have been noticing my tf700 seems inconsistent. Runs smooth sometimes and then laggy and jerky other times. I just got the .22 update and no difference. I have done a couple factory resets and partition cache wipes. I get alot of waits in apps and in the browsers. My tf201 runs much smoother than this.
I went ahead and tried some benchmarks to see if all this was noticed in scores also. I tried these benchmarks before and after reboots and at random times to look for fluctuation. Each time on performance mode. And by golly scores fluctuated alot.
Quadrant 3300 to 5100
Antutu 4600 to 12600
CF-Bench I haven't been over 4700
My tf201 is very consistent. Overclocked to 1.6
Quadrant 4900 to 5200
Antutu 11900 to 12400
CF-Bench 7400 to 7900
Can anyone tell me if they are seeing the same inconsistency, from running great to lag and poor behavior that I'm seeing.
leroybrute said:
I have been noticing my tf700 seems inconsistent. Runs smooth sometimes and then laggy and jerky other times. I just got the .22 update and no difference. I have done a couple factory resets and partition cache wipes. I get alot of waits in apps and in the browsers. My tf201 runs much smoother than this.
I went ahead and tried some benchmarks to see if all this was noticed in scores also. I tried these benchmarks before and after reboots and at random times to look for fluctuation. Each time on performance mode. And by golly scores fluctuated alot.
Quadrant 3300 to 5100
Antutu 4600 to 12600
CF-Bench I haven't been over 4700
My tf201 is very consistent. Overclocked to 1.6
Quadrant 4900 to 5200
Antutu 11900 to 12400
CF-Bench 13500 to 14100
Can anyone tell me if they are seeing the same inconsistency, from running great to lag and poor behavior that I'm seeing.
Click to expand...
Click to collapse
Yeah it seems to be inconsistent too because it's running a Java virtual machine...
Can you try and install WW firmware update, because I've noticed US firmware update is somehow screwed up.
Also noticed the performance degradation right after using US F/W.
It seems real smooth after flashing JP F/W update (it runs a bit hot too) but I never ran benchmarks on that FW.
So do tell your experiences on other FW updates. And as you can imagine it often run into OOM situations when extensively used.
leroybrute said:
I have been noticing my tf700 seems inconsistent. Runs smooth sometimes and then laggy and jerky other times. I just got the .22 update and no difference. I have done a couple factory resets and partition cache wipes. I get alot of waits in apps and in the browsers. My tf201 runs much smoother than this.
I went ahead and tried some benchmarks to see if all this was noticed in scores also. I tried these benchmarks before and after reboots and at random times to look for fluctuation. Each time on performance mode. And by golly scores fluctuated alot.
Quadrant 3300 to 5100
Antutu 4600 to 12600
CF-Bench I haven't been over 4700
My tf201 is very consistent. Overclocked to 1.6
Quadrant 4900 to 5200
Antutu 11900 to 12400
CF-Bench 7400 to 7900
Can anyone tell me if they are seeing the same inconsistency, from running great to lag and poor behavior that I'm seeing.
Click to expand...
Click to collapse
Im thinking the same thing. A lot of waits and hung ups. Not what i was specting from the " top of the line " android. Im guessing is from the i/o
Problem. Im even thinkin to return it n wait. Ive been an asus fan, but they still cant get their !#@&! Together
Redefined301 said:
Yeah it seems to be inconsistent too because it's running a Java virtual machine...
Can you try and install WW firmware update, because I've noticed US firmware update is somehow screwed up.
Also noticed the performance degradation right after using US F/W.
It seems real smooth after flashing JP F/W update (it runs a bit hot too) but I never ran benchmarks on that FW.
So do tell your experiences on other FW updates. And as you can imagine it often run into OOM situations when extensively used.
Click to expand...
Click to collapse
I don't understand why JP and WW would be any different than the US version other than language. I haven't tried other versions on my other tablets and to be honest I am hoping Asus gets a fix to us.
What are the differences between the versions?
Redefined301 said:
Yeah it seems to be inconsistent too because it's running a Java virtual machine...
Can you try and install WW firmware update, because I've noticed US firmware update is somehow screwed up.
Also noticed the performance degradation right after using US F/W.
It seems real smooth after flashing JP F/W update (it runs a bit hot too) but I never ran benchmarks on that FW.
So do tell your experiences on other FW updates. And as you can imagine it often run into OOM situations when extensively used.
Click to expand...
Click to collapse
I would like to see if others are seeing the erratic benchmark scores,
leroybrute said:
I don't understand why JP and WW would be any different than the US version other than language. I haven't tried other versions on my other tablets and to be honest I am hoping Asus gets a fix to us.
What are the differences between the versions?
Click to expand...
Click to collapse
The japanese, man, they're magicians. Also, I would scream weeaboo at the guy who suggested this if I weren't a weeaboo myself.
lol
Getting very consistent benchmark results. Quadrant around 5000 and antutu around 12500.
Only real issue I have is IO lockups.
I'm on US update.
I hope you understand that the TF201 has been on the market for some time now. That means they have had time to smooth out the bugs....at least the software portion. I have yet to see a real hardware issue so far, so the tablet can really only get better with time, and how much love it gets from Asus. And coming from the TF201, you should know how good Asus is about fixing their software.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
KilerG said:
I hope you understand that the TF201 has been on the market for some time now. That means they have had time to smooth out the bugs....at least the software portion. I have yet to see a real hardware issue so far, so the tablet can really only get better with time, and how much love it gets from Asus. And coming from the TF201, you should know how good Asus is about fixing their software.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
Agreed. That's why I am hanging on to mine. I remember the prime issues. I just wanted to see how many out there are seeing similar issues.
I am however a little shocked that Asus hasn't come any further than this with the software for the Tf700. The firmware on the tf, tf201, and the tf300 are ahead of the firmware on the tf700. How many months have they been working on the tf700?
leroybrute said:
Agreed. That's why I am hanging on to mine. I remember the prime issues. I just wanted to see how many out there are seeing similar issues.
I am however a little shocked that Asus hasn't come any further than this with the software for the Tf700. The firmware on the tf, tf201, and the tf300 are ahead of the firmware on the tf700. How many months have they been working on the tf700?
Click to expand...
Click to collapse
I know, it's unfortunate, but they'll fix it. They always do.
I just realized last night if I run in balanced mode rather than performance (which I tend to run on out of habit) my tablet runs much smoother. All the benchmarks I run show it also. Even though it needs a fix I am much happier now with a smoother experience.
Redefined301 said:
Yeah it seems to be inconsistent too because it's running a Java virtual machine...
Can you try and install WW firmware update, because I've noticed US firmware update is somehow screwed up.
Also noticed the performance degradation right after using US F/W.
It seems real smooth after flashing JP F/W update (it runs a bit hot too) but I never ran benchmarks on that FW.
So do tell your experiences on other FW updates. And as you can imagine it often run into OOM situations when extensively used.
Click to expand...
Click to collapse
I'm on TW and it's been better than .21 WW, but I'm not sure if it's the firmware itself or rather data wipe that helped.
Related
Hi all, I just got the Infinity today with the dock. I installed some apps, everything was working well fast and smooth, Quadrant result was excellent at 4959. Then I did the OTA update to 9.4.5.26 and everything is sluggish, stuttering and Quadrant result is down to 4124. Has anyone else had this happen? Any suggestions?
Thanks.
rambling1 said:
Hi all, I just got the Infinity today with the dock. I installed some apps, everything was working well fast and smooth, Quadrant result was excellent at 4959. Then I did the OTA update to 9.4.5.26 and everything is sluggish, stuttering and Quadrant result is down to 4124. Has anyone else had this happen? Any suggestions?
Thanks.
Click to expand...
Click to collapse
Paperclip reset after every OTA
drherron said:
Paperclip reset after every OTA
Click to expand...
Click to collapse
Thanks. Looks like it's more responsive now but Quadrant is still much lower at about 4000, below TF201. Strange that it would worsen performance but at least it's moving smoothly now.
I just bought this device as a toy and a test as a computer tablet. I found it to be slow and buggy. I do notice that in browsing heavy pages like the real facebook page it IS faster than my Galaxy Note 1 but in almost everything else, the Note is faster and snappier. I have disabled lots of apps, resett it, no change. So my question, I guess this one is really worth rooting and installing a good rom Im used to the Cyanogen to my phones, is Cyanogen working good for this tablet?
Im still marveled by the quality of the screen, I dont think I ever have seen such a good screen! If I just now could get it working somewhat near as good as my Note 1 I will be a happy panda
Thanx in advance peeps
My experience is that it is NOT slow and buggy.
I could compare it with an iPad3 last week and I think they are very close.
You can't compare it with a note because due to the much higher resolution the gpu has to do so much more computing. That is why the nexus7 is faster than the tf700 due to it's smaller screen AND resolution
hobs0n said:
I just bought this device as a toy and a test as a computer tablet. I found it to be slow and buggy. I do notice that in browsing heavy pages like the real facebook page it IS faster than my Galaxy Note 1 but in almost everything else, the Note is faster and snappier. I have disabled lots of apps, resett it, no change. So my question, I guess this one is really worth rooting and installing a good rom Im used to the Cyanogen to my phones, is Cyanogen working good for this tablet?
Im still marveled by the quality of the screen, I dont think I ever have seen such a good screen! If I just now could get it working somewhat near as good as my Note 1 I will be a happy panda
Thanx in advance peeps
Click to expand...
Click to collapse
I'm on stock rom with browser2ram and force2gpu enabled. My table is very fast. Just remember before you flash a new rom, just do factory reset(data wipe 3 times). Also root is good (allow you to install rooted app like Titinium backup, SetcPU etc..), but don't unlock unless absolutely necessary (void your warranty), or you have time or like to play with custom rom.
Ok, sounds like I will root it then and try to tweak it, Im not satisfied with the speed with it sofar. Its seems stable now after I resetted it, before the reset, it crasched 2-10 times a day. My idea was that since the GPU and CPU is older in the Note, The Tegra 3 would be able to handle the FullHD resolution but it doesnt seem to .. I definatly want a ROM without the garbage crap
I plan to use it to write alot on, can you recommend a good office app? Or a browser that google docs work good with
Is games running good for you?? The new demanding ones I tried before resetting was really slow and laggy.
Thanx for the replys, I hope I get this baby running smoother
hobs0n said:
Ok, sounds like I will root it then and try to tweak it, Im not satisfied with the speed with it sofar. Its seems stable now after I resetted it, before the reset, it crasched 2-10 times a day. My idea was that since the GPU and CPU is older in the Note, The Tegra 3 would be able to handle the FullHD resolution but it doesnt seem to .. I definatly want a ROM without the garbage crap
I plan to use it to write alot on, can you recommend a good office app? Or a browser that google docs work good with
Is games running good for you?? The new demanding ones I tried before resetting was really slow and laggy.
Thanx for the replys, I hope I get this baby running smoother
Click to expand...
Click to collapse
Yes, all games, videos, pictures, and documents and apps are function normally. There are 3 most popular office apps:
1. Documents to go (this can view google docs also. Paid version only)
2. Kingsoft office
3. Polaris office (currently polaris has a bug with fonts).
My stock browser can view google docs fine. I think stock browser is the best in my opinion (have tried boat, chrome, mozilla etc...)
hobs0n said:
My idea was that since the GPU and CPU is older in the Note, The Tegra 3 would be able to handle the FullHD resolution but it doesnt seem to .. I definatly want a ROM without the garbage crap
Click to expand...
Click to collapse
The Infinity's performance is not CPU bound and is not due to the higher res. It's I/O limited. The CPU is plenty fast enough. As soon as the memory config requires the system to start hitting the /sdcard memory, the system will be subject to random stuttering/pausing because the sdcard memory is the cheapest, slowest, crappiest flash RAM ASUS could find.
This is why stuff like browser2ram is seen as a huge boost for people that do a lot of browsing and it is also why the stuttering varies from user to user/session to session since the RAM situation in the system varies from config to config and moment to moment during use. Some users who's config has a lot of free DRAM and do not frequently use stuff that hits the sdcard partition hard, see almost no performance issues with the tablet.
zenaxe said:
The Infinity's performance is not CPU bound and is not due to the higher res. It's I/O limited. The CPU is plenty fast enough. As soon as the memory config requires the system to start hitting the /sdcard memory, the system will be subject to random stuttering/pausing because the sdcard memory is the cheapest, slowest, crappiest flash RAM ASUS could find.
This is why stuff like browser2ram is seen as a huge boost for people that do a lot of browsing and it is also why the stuttering varies from user to user/session to session since the RAM situation in the system varies from config to config and moment to moment during use. Some users who's config has a lot of free DRAM and do not frequently use stuff that hits the sdcard partition hard, see almost no performance issues with the tablet.
Click to expand...
Click to collapse
Well,
I guess I'm going to do the downgrade to ICS .30\root\then try the rootkreeper deal back to Belly Jean.
I really don't want to go thru all this, but if I want to keep chipping away trying to find a better Android experience then so be it.
Pain in the ass...
Thanx for the info! That was my biggest thoughts about the Infinity, "is the RAM enough?" and it isnt but then Ill just have to multitask less and try to tweak it. And perhaps dont install multipicture wallpaper.. but thats one of the things that I love about my Note
buhoitr: thanx for the suggestions, Ill try them and see
What rom would you suggest for getting the most out of the Infinity?
zenaxe said:
The Infinity's performance is not CPU bound and is not due to the higher res. It's I/O limited. The CPU is plenty fast enough. As soon as the memory config requires the system to start hitting the /sdcard memory, the system will be subject to random stuttering/pausing because the sdcard memory is the cheapest, slowest, crappiest flash RAM ASUS could find.
This is why stuff like browser2ram is seen as a huge boost for people that do a lot of browsing and it is also why the stuttering varies from user to user/session to session since the RAM situation in the system varies from config to config and moment to moment during use. Some users who's config has a lot of free DRAM and do not frequently use stuff that hits the sdcard partition hard, see almost no performance issues with the tablet.
Click to expand...
Click to collapse
hobs0n said:
I just bought this device as a toy and a test as a computer tablet. I found it to be slow and buggy. I do notice that in browsing heavy pages like the real facebook page it IS faster than my Galaxy Note 1 but in almost everything else, the Note is faster and snappier. I have disabled lots of apps, resett it, no change. So my question, I guess this one is really worth rooting and installing a good rom Im used to the Cyanogen to my phones, is Cyanogen working good for this tablet?
Im still marveled by the quality of the screen, I dont think I ever have seen such a good screen! If I just now could get it working somewhat near as good as my Note 1 I will be a happy panda
Thanx in advance peeps
Click to expand...
Click to collapse
Hmmm, I've found mine to be quick and virtually bug-free, but then again I didn't buy it as a toy.
A little tweaking and I wouldn't call it slow. Even stock its a solid piece of equipment.
Apply data2sd mod built for CleanROM 2 after installing the ROM. You'll need a fast sd card.
Research the threads. The blob for data2sd for that ROM was just posted today.
look at my I/O!
Sent from my ASUS Transformer Pad TF700T using xda app-developers
I own both the Infinity and the Acer a700 and after the a700 got JB earlier today, I will say that the Infinity lags more than the a700 (and I was very happy with the Infinity). Colour me shocked.
The only time I really ever experience any lag or sluggishness is when browsing. I will be rooting once there is a method discovered for Jelly Bean on the Infinity. I'd really like to give browser2ram a shot. I've heard it does wonders for browsing.
Sent from my ASUS Transformer Pad TF700T
Better than ever
Before i say thing, I will list the important things about my tablet - C7 model, Has been repaired for speaker issues & Jelly bean 4.1.1. I'd say TF700T is a powerful device, It lacks the software for it. I use to notice quiet a bit of lag on ICS but after upgraded to Jelly bean, It's faster than ever! I would even compare it to iPad 3:laugh: I'm running Stock Jelly bean with a bit of removing apps here and there.
I Don't know why everyone is having problems with such a decent device.
ExjeetzZ said:
Before i say thing, I will list the important things about my tablet - C7 model, Has been repaired for speaker issues & Jelly bean 4.1.1. I'd say TF700T is a powerful device, It lacks the software for it. I use to notice quiet a bit of lag on ICS but after upgraded to Jelly bean, It's faster than ever! I would even compare it to iPad 3:laugh: I'm running Stock Jelly bean with a bit of removing apps here and there.
I Don't know why everyone is having problems with such a decent device.
Click to expand...
Click to collapse
I you guys would read the Development section (read the newer threads, please) you would see that CleanROM2.2 has pretty much completely eliminated the lag and i/o issues. It's reason enough to root and unlock. This tablet is a beast when it is allowed to begin to reach its full potential.
okantomi said:
I you guys would read the Development section (read the newer threads, please) you would see that CleanROM2.2 has pretty much completely eliminated the lag and i/o issues. It's reason enough to root and unlock. This tablet is a beast when it is allowed to begin to reach its full potential.
Click to expand...
Click to collapse
Im rooted and installed CleanRom2.2 this morning and it is indeed faster and smoother i will try the tweaking you guys suggested later. It still lagged when i downloaded my spotify playlists while i was downloading youtube movies tho
okantomi said:
I you guys would read the Development section (read the newer threads, please) you would see that CleanROM2.2 has pretty much completely eliminated the lag and i/o issues. It's reason enough to root and unlock. This tablet is a beast when it is allowed to begin to reach its full potential.
Click to expand...
Click to collapse
I think CleanROM 2.2 is the route I'm going to go too...that's if I can figure out how to do it without asking a bunch of dumbs**t questions.
Still reading about it in development.
I'm getting more and more disappointed with this TF700T each time I turn it on lately...
Did really dig it for a while...not anymore
Will i unlock? No...
Thats OK said:
I think CleanROM 2.2 is the route I'm going to go too...that's if I can figure out how to do it without asking a bunch of dumbs**t questions.
Still reading about it in development.
I'm getting more and more disappointed with this TF700T each time I turn it on lately...
Did really dig it for a while...not anymore
Click to expand...
Click to collapse
If it was really laggy and something that i can't deal with i would unlock but since it feels flawless, I might stay. I don't give a crap about their warranty but i do care for my device (brick)
ExjeetzZ said:
I use to notice quiet a bit of lag on ICS but after upgraded to Jelly bean, It's faster than ever!
Click to expand...
Click to collapse
It's the total opposite for me. ICS was fast and virtually lag-free. The latest updates to Jellybean my Infinity lags like nobody's business. Very disappointing. Looks like root'n'rom time.
buhohitr said:
I'm on stock rom with browser2ram and force2gpu enabled.
Click to expand...
Click to collapse
What is force2gpu?
(google seems to give irrelevant results).
Thx
squigs said:
What is force2gpu?
(google seems to give irrelevant results).
Thx
Click to expand...
Click to collapse
If I may attempt an answer,
I believe that's a reference to the "force gpu rendering" in settings under developer options.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Hi everybody!
I am in a situation described somewhat by the title. My tf700 is so freakin' tweaked that the last thing I can do is grab a class 10 microSD card and do the I/O fix (not done yet). I am on CROMI 3.3 (rooted, unlocked, but this is obvious ), OC kernel by _that with the ROW addon, which came just after Clemsyns kernel, so the performance mode is even more kick-ass, as it stayed after kernel flash. Fsync disabled, lag fix applied. Yeah, pretty much everything except I/O fix. The problem is my top bemchmark result is about 6700, while I expect ~7150 (well, some users with same specs as mine get ~7150). Done right after a coldboot, with all the useless apps killed, forced GPU. I don't really care abot the result, but it seems like there is some performance potential missing, yet to be used... Would be really nice if someone would be able to point out the reason of this.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
post a screenshot as an attachment so some good samaritan can see the cpu / io / memory / 2d /3d figures... and which one is low...
wnerw said:
Hi everybody!
I am in a situation described somewhat by the title. My tf700 is so freakin' tweaked that the last thing I can do is grab a class 10 microSD card and do the I/O fix (not done yet). I am on CROMI 3.3 (rooted, unlocked, but this is obvious ), OC kernel by _that with the ROW addon, which came just after Clemsyns kernel, so the performance mode is even more kick-ass, as it stayed after kernel flash. Fsync disabled, lag fix applied. Yeah, pretty much everything except I/O fix. The problem is my top bemchmark result is about 6700, while I expect ~7150 (well, some users with same specs as mine get ~7150). Done right after a coldboot, with all the useless apps killed, forced GPU. I don't really care abot the result, but it seems like there is some performance potential missing, yet to be used... Would be really nice if someone would be able to point out the reason of this.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Click to expand...
Click to collapse
Seems like you're not hitting 1800 OC, can you download "cpu spy" and see if you actually hit 1800 in performance mode? and make sure you set your governor to "interactive".
Yeah, haha, I can't post pictures in this forum, cause XDA Premium app says so. Neither can I post URLs as I am still below 10 posts. Anyway, I'm using interactive governor. According to cpu spy my tf700 uses every frequency with no problem.
My latest benchmark results (I updated bootloader today):
Overall - 6909
CPU - 16475
Mem - 4273
I/O - 10648
2D - 833
3D - 2318
CPU result seems quite high, ain't it? I think that 2D is the problem, though I haven't compared it yet...
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
6400+ is great performance. Quadrant is not a very good consistent bench marker. You can run it 10 times and get scores wildly varying by 500 points. I couldn't get over 7000 for 2 days. Thought something was up and then suddenly with no changes 7200.
Don't worry about it. Does the ROM feel quick?
sbdags said:
6400+ is great performance. Quadrant is not a very good consistent bench marker. You can run it 10 times and get scores wildly varying by 500 points. I couldn't get over 7000 for 2 days. Thought something was up and then suddenly with no changes 7200.
Don't worry about it. Does the ROM feel quick?
Click to expand...
Click to collapse
Good a true words ^^^
I get low scores with Quadrant, yet I don't believe them because 3.3 CROMi is very smooth and shows no indications of stutter.
Been said a billion times "it's all all about user experience."
Someone may be able answer but i doubt but i have to ask the question...
Had my tf since november - the business on it as soon as it was out of the box. But no matter what image ive loaded onto it its always been slow ( i think ive tried them all) ie my nexus4 runs greasy smooth compared to my tf, almost to the point that a guy at work gave me a 300 to unlock and his seemed a lot better/smoother/faster than mine....is it just mine or is it the norm
currently im on cyanogen 10.1 latest nightly with the bryce overclocked kernel running at 1.9gb if i was a betting man i would say the nova launcher was running about 10fps with all the special effects off...as a guide...
ps especially the browser - no matter which one it always takes ages to load pages....
Thanks to anyone that can shed any light on it....
I must admit I struggle with your story language-wise, but I think I do get your general statement. CROMI, for example, should run smoothly, no matter what, UNLESS your device is faulty.
I'd recommend wiping EVERYTHING -- so you do not run into remnants form earlier ROMs/installations -- and starting anew with CROMI, just to be sure. Update your bootloader (to the JB version), and then try data2SD if it is still not to your liking.
MartyHulskemper said:
I must admit I struggle with your story language-wise, but I think I do get your general statement. CROMI, for example, should run smoothly, no matter what, UNLESS your device is faulty.
I'd recommend wiping EVERYTHING -- so you do not run into remnants form earlier ROMs/installations -- and starting anew with CROMI, just to be sure. Update your bootloader (to the JB version), and then try data2SD if it is still not to your liking.
Click to expand...
Click to collapse
And to add to Marty's efforts what ever you do if flashisg from a custom recovery with JB 4.1 or later do not use an older version of any recovery!
Hi - which rom is that...?
I must say im kind of trying that right now....complete wipe, factory reset and then a factory reset from the recovery screen....its auto loading the apps at the moment....thanks for the reply all the same....ive never tried that bit of software that goes on the memory card...is there a walkthrough somewhere?
im pretty sure im on the jb bootloader but is there a way to check??
You can flash the latest bootloader form page 2 of the CleanRom Inheritance thread And CROMI from page 1
Mr read PLZ
As far as I know stock TF700 related ROMs are laggy and require a custom Over clocked kernel such as Clemsyn which is rubbish and even with this performance is sluggish. But her is a way to get rid of the lag once and for all. Unlock and root the TF700. Then install Cyanogenmod 10.1 latest build and then when you boot into it set the IO as CFQ permenantly and then use Seeder with the settings on aggressive and the IO extend option unticked but all the rest of the options ticked. Also use lightning browser or Browser2RAM which enhances the stock Android browsers performance.
After that enjoy a super fast transformer like never before. Don't use any other rom . My transformer got nearly 150000 on Antutu which is really good and I got nearly 5500 on Quadrant with it on performance mode (I didn't use the custom CM10.1 customs kernel or any other one just the stock CM10.1 kernel). My transformer in balanced seems to be on par with an iPad 2, 3 and better than a normal Asus transformer Prime or TF300 and I have over 40 applications with several games with 1+GB data. The IO problem is still there as it is hardware based although with this their is nearly no lag for the first time. Beautiful TF700 CyanogenMod developers. I read the commit log and checked the code many gerrit optimisations for the IO and Armv7 cores. Enjoy!!!!! Wohoo Project Butter!!!!!
Continue Cyanogenmod providing better support than Asus. One reason to jailbreak (Root) is because of this.
coolmsb said:
As far as I know stock TF700 related ROMs are laggy and require a custom Over clocked kernel such as Clemsyn which is rubbish and even with this performance is sluggish. But her is a way to get rid of the lag once and for all. Unlock and root the TF700. Then install Cyanogenmod 10.1 latest build and then when you boot into it set the IO as CFQ permenantly and then use Seeder with the settings on aggressive and the IO extend option unticked but all the rest of the options ticked. Also use lightning browser or Browser2RAM which enhances the stock Android browsers performance.
After that enjoy a super fast transformer like never before. Don't use any other rom . My transformer got nearly 150000 on Antutu which is really good and I got nearly 5500 on Quadrant with it on performance mode (I didn't use the custom CM10.1 customs kernel or any other one just the stock CM10.1 kernel). My transformer in balanced seems to be on par with an iPad 2, 3 and better than a normal Asus transformer Prime or TF300 and I have over 40 applications with several games with 1+GB data. The IO problem is still there as it is hardware based although with this their is nearly no lag for the first time. Beautiful TF700 CyanogenMod developers. I read the commit log and checked the code many gerrit optimisations for the IO and Armv7 cores. Enjoy!!!!! Wohoo Project Butter!!!!!
Continue Cyanogenmod providing better support than Asus. One reason to jailbreak (Root) is because of this.
Click to expand...
Click to collapse
Well not to brag but flash CROMI which is based on stock and you can achieve 17000 on antutu and over 7000 on quadrant. So much for stock ROMs being laggy eh?
Now with no overclocking you are looking at 5500 - 6000 on quadrant so would seem to be on par with CM based ROMs. I do like CM but you lose some functionality whilst gaining others and you have to suffer some stability issues especially if doing nightlies. Also they never seem to finish them.....
coolmsb said:
blah blah blah
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2164090
This user posted the same response in the above thread also.
Looks to me like someone has an agenda.
Thats OK said:
http://forum.xda-developers.com/showthread.php?t=2164090
This user posted the same response in the above thread also.
Looks to me like someone has an agenda.
Click to expand...
Click to collapse
Don't you? I know I have!
MartyHulskemper said:
Don't you? I know I have!
Click to expand...
Click to collapse
Yes I do
Thats OK said:
Yes I do
Click to expand...
Click to collapse
Me three!
Hey all -
I have been a Transformer (and modding) fan since my TF101, and I just leapt from a TF201 to the infinity.
I'm not sure quite what I was expecting, but I surely wasn't expecting it to be slower. Responses to screen taps and swipes are very delayed, to the point where it's extremely annoying.
This is all subjective, I realize, but I was wondering if this is a widespread thing or if I should try to RMA it.
I had heard that CROMi-X was the rom to have, so I flashed 4.6.7.
I had also heard that the GPU was an ass-kicker, so I put on my favorite piece of eye-candy (that I've purchased) which is "Asphalt 7: Heat." - and it ran DOG SLOW, and wasn't particularly candy-ish.
Well, maybe that's an exaggeration, but having the 201 and 700 side-by-side (literally, driving one with each hand, and poorly at that) the 700 was choppy and would pause every so often. It took MUCH longer to load, too.
So I was unhappy.
I read about the slow internal I/O and re-flashed with a Data2SD option, formatted the microcard, the whole nine yards, and it didn't really get any better. fsync is turned OFF.
I side-graded to the older CleanROM Inheritance 3.4.7, and it actually seems SLIGHTLY better, but the UI has a tendency to be very laggy.
I'm going to try "AndroWook" next, I had that on my Prime with good success.
I've googled and found plenty, plenty plenty of people who have a problem with the TF700 and its speed, which is really disappointing because it's supposed to be the top of the line.
So.. is anyone out there really HAPPY with their TF700? Is it zippy and satisfying? What ROM are you using?
Maybe I'll try to unload it on craigslist and go back to the TF201. It has lower "Androbench" marks, but is crazy more responsive.
*shrug*
I'd love to hear anyone's thoughts...
R
Just learned about 'lagfix.'
Gonna try that.
Is 4.1.1 better performance? I realize it'd technically be a step backwards...
rprussell said:
Just learned about 'lagfix.'
Gonna try that.
Is 4.1.1 better performance? I realize it'd technically be a step backwards...
Click to expand...
Click to collapse
I'm still using 4.1.1. I run Cromi 3.4.6 with Hund's kernel 2.2, along with most of the tweaks found here (http://forum.xda-developers.com/showthread.php?t=2232715). I am not running data2sd and my CPU/GPU profiles are not as aggressive. Apparently some people have been getting bootloops after applying these tweaks but I've never had it.
I've tried 4.2 several times (with different versions of Cromi-X) but usually come back to 4.1.1 within a day because it seems to run better.
Having said this, I think "lags" can be quite subjective - I personally think my tf700 is zippy but perhaps you wouldn't agree.
rprussell said:
Hey all -
I have been a Transformer (and modding) fan since my TF101, and I just leapt from a TF201 to the infinity.
I'm not sure quite what I was expecting, but I surely wasn't expecting it to be slower. Responses to screen taps and swipes are very delayed, to the point where it's extremely annoying.
This is all subjective, I realize, but I was wondering if this is a widespread thing or if I should try to RMA it.
I had heard that CROMi-X was the rom to have, so I flashed 4.6.7.
I had also heard that the GPU was an ass-kicker, so I put on my favorite piece of eye-candy (that I've purchased) which is "Asphalt 7: Heat." - and it ran DOG SLOW, and wasn't particularly candy-ish.
Well, maybe that's an exaggeration, but having the 201 and 700 side-by-side (literally, driving one with each hand, and poorly at that) the 700 was choppy and would pause every so often. It took MUCH longer to load, too.
So I was unhappy.
I read about the slow internal I/O and re-flashed with a Data2SD option, formatted the microcard, the whole nine yards, and it didn't really get any better. fsync is turned OFF.
I side-graded to the older CleanROM Inheritance 3.4.7, and it actually seems SLIGHTLY better, but the UI has a tendency to be very laggy.
I'm going to try "AndroWook" next, I had that on my Prime with good success.
I've googled and found plenty, plenty plenty of people who have a problem with the TF700 and its speed, which is really disappointing because it's supposed to be the top of the line.
So.. is anyone out there really HAPPY with their TF700? Is it zippy and satisfying? What ROM are you using?
Maybe I'll try to unload it on craigslist and go back to the TF201. It has lower "Androbench" marks, but is crazy more responsive.
*shrug*
I'd love to hear anyone's thoughts...
R
Click to expand...
Click to collapse
It is odd. With what you said, your TF700 should be very smooth unless there is a hardware problem Did you try a clean install? BTW, if you reinstall again, I would recommend that you should use Cromi X V4.6.5 instead of 4.6.7.
For some reason when I used the Advanced Wipe and wiped everything in TWRP. I still found some old files on my internal SD. However, when I used a formatted option, everything was gone and clean. Maybe you should do that. Also if you use Data2Ram, you should reformat your MicroSD as the same time with your clean install. A combination of Fsync Off, D2R, and Cromi X should work very well. My kernel is Hund's V3.0.6 with OC of 1.4G CPU, 520M GPU for Power Saving, 1.6G CPU, 600M GPU for Normal, and 1.8G CPU, 650M GPU for my Performance with UV about 35mV. My quandrant scores are 5800 for Power Saving = Game Mode, 6400 for Normal = Normal Activities, and 7000s for Performance = Browsing and streaming movies. Please report back if you decide to do a clean install, thanks and good lucks.
Here are my settings and quadrant scores using Hund 2.2:
Power Saving - GPU 650Mhz, CPU 1.45/1.4Ghz - Quadrant 5331
Balanced - GPU 700Mhz, CPU 1.65/1.6Ghz - Quadrant 6336
Performance - GPu 775Mhz, CPU 1.85/1.8 Ghz - Quadrant 7005
Personally I take the quadrant scores with a grain of salt because I've had setups where the scores were better but the tablet was not as responsive. I mostly run on Power Saving mode without any problems.
LetMeKnow said:
Did you try a clean install? BTW, if you reinstall again, I would recommend that you should use Cromi X V4.6.5 instead of 4.6.7.
Click to expand...
Click to collapse
Several totally clean installs at this point.
AndroWook was bust, it didn't even get past the "ASUS" logo.
I'm back to Cromi 3.4.7 with _that's kernel 3.1.10. A lot of folks are mentioning Hund 2.2, perhaps I'll try overlaying that now.
Drenus said:
Having said this, I think "lags" can be quite subjective - I personally think my tf700 is zippy but perhaps you wouldn't agree.
Click to expand...
Click to collapse
I totally agree. I added a bunch of the PimpMyRom tweaks and rebooted. I'm letting it settle down and then going to see what's what.
I can't get the GPU overclock to take, though. I think I've mounted the FS r/w and I'm editing the GPU cap files to contain 1460 as directed, but the next time I open the file it's back to 1300. Weird.
So, my Quadrant score after all the tweaks were put in, on "Balanced," is 5266. On "Performance," it's 5139.
Erugh?
rprussell said:
So, my Quadrant score after all the tweaks were put in, on "Balanced," is 5266. On "Performance," it's 5139.
Click to expand...
Click to collapse
Strange. I get 5200 in balanced mode without any special tweaks, and over 6000 in performance mode with fsync off.
The general user experience is acceptable, but not exceptionally smooth - lost frames in animations are common, but there are no long waiting times anywhere.
_that said:
Strange. I get 5200 in balanced mode without any special tweaks, and over 6000 in performance mode with fsync off.
Click to expand...
Click to collapse
Did I mention I also have fsync off?
('Coz I do.)
Maybe it's faulty, which would make me sad because I doubt I can return it what with unlocking and flashing the crapola out of it. Hm hm.
rprussell said:
I can't get the GPU overclock to take, though. I think I've mounted the FS r/w and I'm editing the GPU cap files to contain 1460 as directed, but the next time I open the file it's back to 1300. Weird.
So, my Quadrant score after all the tweaks were put in, on "Balanced," is 5266. On "Performance," it's 5139.
Click to expand...
Click to collapse
That is really odd. Unfortunately my knowledge of tweaking is entirely based on following other people's instructions so I don't know why the GPU changes are not taking. Are your CPU changes taking? Did you follow the instructions on init.d scripts/enabling his voltage table and governor tweaks?
Here's are my cpu.sh files. I switched the profile for powering saving mode and balanced mode because the tablet always defaults to balanced mode.
-----------------------
Also, when I made the profile too aggressive (too high on CPU or GPU), the tablet got way hot and my quadrant score dropped. Since our tablets are all different on the amount of overclocking they can handle, maybe you're pushing your tablet too much. Have you tried easing down on overclocking?
Drenus said:
Here are my settings and quadrant scores using Hund 2.2:
Power Saving - GPU 650Mhz, CPU 1.45/1.4Ghz - Quadrant 5331
Balanced - GPU 700Mhz, CPU 1.65/1.6Ghz - Quadrant 6336
Performance - GPu 775Mhz, CPU 1.85/1.8 Ghz - Quadrant 7005
Personally I take the quadrant scores with a grain of salt because I've had setups where the scores were better but the tablet was not as responsive. I mostly run on Power Saving mode without any problems.
Click to expand...
Click to collapse
LOL I totally agreed with on that. :laugh: However, I still think that it is better with some numbers as references others than words lags, smooth, choppy, slow, fast, and so on. :good: It is just my way of explanations.
This might be my final entry - after doing the PMR tweaks, and flashing Hund 2.2 (no offense, _that ) the Quadrant score in Performance mode is ... uh.. well, indeterminate because suddenly I can't attach to our wifi. Sigh. Perhaps I overtweaked.
Although, Asphalt ran VERY smoothly. I credit the GPU overclock, in combination with assigning all the 2D stuff to the GPU.
Yeah, definitely. After flashing hund 2.2, it won't acquire an IP address.
Today is surely an interesting day.
rprussell said:
This might be my final entry - after doing the PMR tweaks, and flashing Hund 2.2 (no offense, _that ) the Quadrant score in Performance mode is ... uh.. well, indeterminate because suddenly I can't attach to our wifi. Sigh. Perhaps I overtweaked.
Although, Asphalt ran VERY smoothly. I credit the GPU overclock, in combination with assigning all the 2D stuff to the GPU.
Yeah, definitely. After flashing hund 2.2, it won't acquire an IP address.
Today is surely an interesting day.
Click to expand...
Click to collapse
You probably have problems because of PMR tweaks I remember I also had wifi issues after PMR and I think I didn't enable all the tweaks in the guide. Try PMR recovery where it restores all your previous settings-it should restore your wifi. If not, then maybe a clean install of Cromi and then doing the init.d/Hund/CPU/GPU tweaks should give you quite a bit of performance boost.
Hope by "final entry" you don't mean you're giving up!
Drenus said:
You probably have problems because of PMR tweaks I remember I also had wifi issues after PMR and I think I didn't enable all the tweaks in the guide. Try PMR recovery where it restores all your previous settings-it should restore your wifi. If not, then maybe a clean install of Cromi and then doing the init.d/Hund/CPU/GPU tweaks should give you quite a bit of performance boost.
Hope by "final entry" you don't mean you're giving up!
Click to expand...
Click to collapse
Yeah, it seems as if the "Fast DNS" internet tweak means it has somehow thrown off DHCP.
I'm connected to the wifi AP, but I get no IP address, etc.
I guess I'll flash the recovery thing. Darn, everything but that was working great
No, I had meant to say 'final entry' insofar as I was finally happy with it - but while i was typing it, I wanted to put in the Quadrant score, and then I realize I couldn't connect to the website, and then I realized I had no IP, and here we are.
So that post sort of morphed as I was typing...
rprussell said:
I guess I'll flash the recovery thing. Darn, everything but that was working great
Click to expand...
Click to collapse
Huh.
Wont' flash, at least not with twrp 2.4.4.0
Growf.
rprussell said:
Huh.
Wont' flash, at least not with twrp 2.4.4.0
Growf.
Click to expand...
Click to collapse
Which is just as well, since when I rebooted I had an IP again.
Recovery image went south too, and I had to re-flash that via adb.
There is truly some weird stuff happening here.
Anyway, the quadrant score - now on "Performance" because I swapped cpu2 and cpu3, what a great idea - is...
IS.....
IS.....
5057.
Ah, the hell with it.
rprussell said:
Which is just as well, since when I rebooted I had an IP again.
Recovery image went south too, and I had to re-flash that via adb.
There is truly some weird stuff happening here.
Anyway, the quadrant score - now on "Performance" because I swapped cpu2 and cpu3, what a great idea - is...
IS.....
IS.....
5057.
Ah, the hell with it.
Click to expand...
Click to collapse
Wow, that is just odd. Does the tablet get really hot when you run quadrant? It might be that the GPU/CPU settings are too high. Hope actual performance is still working out for you.
And as for recovery, I meant running the rescue package inside PMR that "un-pimps" the rom. Thinking back on when I installed the tweaks, I think I did everything mentioned in PMR except for Network & Internet mods. And I love the xloud mod!
Drenus said:
Wow, that is just odd. Does the tablet get really hot when you run quadrant? It might be that the GPU/CPU settings are too high. Hope actual performance is still working out for you.
And as for recovery, I meant running the rescue package inside PMR that "un-pimps" the rom. Thinking back on when I installed the tweaks, I think I did everything mentioned in PMR except for Network & Internet mods. And I love the xloud mod!
Click to expand...
Click to collapse
It was pretty warm, yeah. I knocked the cpu back from 1900mhz to 1800mhz - which doesn't seem to matter since according to the little floating CPU monitor I have ("Cool Tool") it's never going over 1600mhz anyway.
I mean, I've got PMR trying to control stuff on one hand, the built-in "Power Saving/Balanced/performance" thing on the other, and also "Trickster Mod"
Idunno.
It does seem perkier after all this, so maybe it doesn't matter.
I wish Quadrant would let me see my score without hitting the internet though. I backed off the voltages by 0.025v per speed, and came up with 5499 this time. Although I don't know whether that's "performance" or what.
rprussell said:
It was pretty warm, yeah. I knocked the cpu back from 1900mhz to 1800mhz - which doesn't seem to matter since according to the little floating CPU monitor I have ("Cool Tool") it's never going over 1600mhz anyway.
Click to expand...
Click to collapse
Did you use Hundsbuah's app to set whatever parameters need to be set?
Sorry for not being more specific, I have no experience with it, I just know Hundsbuah didn't only add awesome overclocking features into his kernel, but he also wrote an app to control it.
rprussell said:
I mean, I've got PMR trying to control stuff on one hand, the built-in "Power Saving/Balanced/performance" thing on the other, and also "Trickster Mod"
Click to expand...
Click to collapse
And this is in addition to changing cpu#.ch files? I wonder if you've got too many cooks in the kitchen.
rprussell said:
It does seem perkier after all this, so maybe it doesn't matter.
I wish Quadrant would let me see my score without hitting the internet though. I backed off the voltages by 0.025v per speed, and came up with 5499 this time. Although I don't know whether that's "performance" or what.
Click to expand...
Click to collapse
Is Asphalt still running better than before? I think the most important thing is that the applications you use are running smoothly and not upsetting you that (1) you spent $$$ on the tablet, (2) you spent a lot of time tweaking the tablet, and (3) you're not getting the performance you want.
I once spent a few hours tweaking CPU/GPU to figure out how I can maximize Quadrant score and what I came away from it is that high score doesn't matter if the tablet is getting way to hot for comfort and that low score doesn't matter if the tablet is running to my satisfaction. I almost never change my power setting and that means my score is probably around 5300, but I still like how the tablet responds.
Anyways, hope your tablet's running better than before and good luck with any additional tweaking! :victory:
_that said:
Did you use Hundsbuah's app to set whatever parameters need to be set?
Click to expand...
Click to collapse
Well.. that's just madness.
No, I was not. I had these other tools and was messing with those.
Might be time to re-flash the kernel again.