Hey guys, the GF left her phone up high and was knocked down and now the screen seems to be dead. Lights up for a moment when turning on then just goes dark. Pretty sure it's operating fine underneath (still need to plug in to computer to check for connectivity), but assuming just the screen needs to be replaced, what are my options?
Is that something I could possibly replace or perhaps send it off to somebody on this forum for repair? How much ($) are we looking to fix? Better to just sell on ebay?
Thanks!
I did a quick search on ebay concerning a new LCD for the Atrix 2 and they seem to cost around 80 bucks... I don't know if that would be a worthy investment since depending on your contract you can maybe get a new one for about that price...
What I can tell you from personal experience is that it is most likely to be a major pain in the ass to replace the screen on your own... I once changed the front frame of my HTC Desire and I basically had to disassemble EVERYTHING including unglue-ing the touchpanel from the frame taking out all sorts of boards and stuff, and I never got rid of the little dust that would get between digitizer and LCD..... (the memories )
But I'd say if you're confident in your technical skills and a new LCD would be worth your money then you might consider going for it...
I don't know but I'd estimate the cost of a professional repair around $150-$200...
One tip just in case: Make sure that no dust gets onto your screen/on the inside of your tuchpanel because once you start "cleaning" it off (with a towel) you'll never get it as clean as it was...
So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.
Mine is 2 months old and i had the clicking issue from the beginning but it didn't got worse and to be honest i don't even notice the clicks anymore (i guess that my brain got used to it ).
Inviato dal mio ASUS Transformer Pad TF700T con Tapatalk 2
Ok, thanks mate... hopefully it won't get any worse. I'll give it a week or two and see if mine spreads at all.
Nexus 7 has same problem
Sent from my Nexus 7 using Tapatalk 2
MisterEz said:
So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.
Click to expand...
Click to collapse
Send it back - that's not acceptable for a highend electronic product. You keep doin this until you get one with accaptable build quality or you buy another brand. Choice is yours. But never accept poor build quality in high end consumer electronics
Had mine for about 3 weeks and received a screen protector a couple of days ago, no problems with the screen but was worried applying the screen protector would show up any defects clickingwise. Panic over screen protector on and display is looking good.
Yeah, I think too many people here accept the fact that their unit has some fault and then just think "well, it could be worse. Be happy with what you got". No way! this should be THE high end tablet, one of the most expensive ones there are and then it has this kind of faults.
IF everybody would be same and think "well this is ok" then Asus wouldn't even learn from their mistakes. They would just keep on with the crappy QC and nothing would be fixed. Maybe they would even worsen the qc to save money and try to find out where is the line that people don't accept the product.
For me, I spend a lot of money and I want my unit be perfect out of the package. It is other issue then if I break it..
I too am having some screen issues, but I think I will have to send my unit back to ASUS completely. Most Dutch retailers only have a very short return period, and I've already had mine for 19 days. I guess I will contact the retailer and ask them what I should do. However, it is really unacceptable that you pay a high price for such a premium product and that it has issues that really should not ocur. The reason why I didn't go back to the retailer was because I didn't really notice it at first, it just got more annoying later on...
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Mine has the loose screen issue all around. But no clicking. So I'm having the same debate in my mind. I think I'm going to return and try for another one.
Sent from my PC36100 using xda app-developers app
I'm returning my 2nd TF700t tomorrow 'cause of loose screen. This time it also made the clicking sound :/
Mine has a loose screen but it's the lower left hand corner by the headphone jack, hdmi port, microphone area. You don't even need to squeeze it hard, it feels hollow in that area and it makes a crunching sound. My biggest fear is the ports there are either going to get damaged or cause a short touching the case. Amazon is sending me a replacement which I should have tomorrow.
Amazon was really gracious in taking my 201 back that I bought in May, but man, WTF, I love Tegra games so the samsung tab is out and I hate Samsung with their wishy washy update and the fact they stop supporting their legacy products fairly fast.
If this next one is trash I don't know what to do, I don't want to be banned by Amazon for returns, sucks ass.
Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.
MisterEz said:
Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.
Click to expand...
Click to collapse
If you check out the Nexus 7 forum (also an ASUS tablet) you can gleam some interesting information about the screen separation issues. It's not as easy to take the Infinity apart, so fixes aren't readily available, but I'm sure the issues are related.
I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.
Thats OK said:
I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.
Click to expand...
Click to collapse
From the ASUS Nexus 7 forums I understand that the loose screen/screen separation may be due to adhesion issues that can be somewhat or completely solved by gentle heat followed by light, consistent pressure. Someone did try that with his Infinity with limited results but I think his frame may not have fit properly as well. The crunching sound some have reported may be due to a really crunchy type of tape used to hold down the battery, if there's any excess flex that causes the screen/digitizer to touch the tape. There was also a screen lift/light bleed issue caused by over-tightened screws in the frame holding the motherboard, etc together. That was user fixable, by just loosening the screws and making sure that they were all fairly evenly tightened. That also really helped with the light bleed issues too.
I received my replacement from Amazon, this one is all good, it even has the cooler color screen I like compared to original, sweet!
I have just sent back my second tablet to amazon after receiving the first one with nearly jammed in buttons and a clicking screen. The second one I got had a little clicking to start and then got progressively worse until I chose to return it. Amazon emailed me and said that they are just going to refund me my money instead of sending out another one with probably similar problems... don't really know what to do now... any other good tablets coming out? Haha
Sent from my Galaxy Nexus using xda app-developers app
The way these tablets are held together is via a longer L shaped plastic edge on the faceplate that mates top edge first to a the ledge built into the backshell. Once inserted under the shell at the top edge the rest of the screen can lay down into the rest of the backshell. There are smaller L shaped clips up and down the outsides which click into place via finger pressure. The bottom edge is secured by two metal slide locks which mount the front to the back much like an old style door chain where the round part fits into a large hole and then slides into a narrower opening to latch it into place.
The point of this post? if the sides or top seem loose you can probably click them together with finger pressure. if the bottom is loose the latch got locked without the round part in place. for this you should return if you have warranty left. If it crunches they probably broke an L shaped clip while assembling.
I received my 2nd Infinity today and I immediately noticed the screen on the bottom left hand corner is above the frame and the rest of the bottom part of the screen flexes when I hold it normally. I'm sending it back. I'll give the Infinity one more chance and hope I get a good one. If not, I'll have to look at other options. At some point enough is enough.
My advice for anyone that has build quality issues with their Infinity is to return it. That is a lot of money to spend to keep a tablet that could break down the line. I wouldn't take any chances, but that's just me.
Seriously though, does anyone know of any other top end tabs coming out soon? I'm tired of dealing with sh*t quality
Sent from my Galaxy Nexus using xda app-developers app
Hi!
I was heartbroken when my MT4GS broke recently. I need a replacement screen assembly for it. I've been looking on ebay, but I only see phones with broken screens or individual service parts. I have a working motherboard but, I need the entire screen assembly replaced.
If anyone has a bricked (or fully working) MT4GS with an otherwise nice looking (and working) screen that's just lying around collecting dust that they would be willing to sell cheap, I would be very happy. I should mention I live in Europe. I'll cover any fees, obviously.
Alternatively, does anyone know of a worthy successor (GSM Android QWERTY slider)?
Thanks.
You should try ebay. there are all sorts of spare parts for this phone and you can get just the part you need without having to buy an entire phone. At least that way you will spend less and not end up with parts you do not need.
very true, this happens to be one of the more pain in the ass phones to fix but it still isnt all to bad. a new digitizer (and very likely will need a new lcd as near impossible to separate) will be in the range of 50$ if you need more than this other parts arent too expensive and not terrible to replace.
as a successor... there really isnt one, closet upgrade with a qwerty is the galaxy relay, others may disagree but between the vision and the doubleshot i am hard pressed to find a true high quality qwerty phone
demkantor said:
very true, this happens to be one of the more pain in the ass phones to fix but it still isnt all to bad. a new digitizer (and very likely will need a new lcd as near impossible to separate) will be in the range of 50$ if you need more than this other parts arent too expensive and not terrible to replace.
as a successor... there really isnt one, closet upgrade with a qwerty is the galaxy relay, others may disagree but between the vision and the doubleshot i am hard pressed to find a true high quality qwerty phone
Click to expand...
Click to collapse
I've never had any trouble getting my LCD out. Though my phone had been opened before, so the sticky wasn't as well stuck to the backside of the LCD. You can use a bit of hairdryer heat to loosen the adhesive.
Now digitizers... Those I seem to burn through.
Well, I suspected that the cable connecting the screen to the motherboard had become damaged, due to the touch function and screen dying when sliding the phone open. I did order a spare part on ebay but in trying to seperate it from the LCD, I ended up making it worse. I did use a hairdryer to warm up the adhesive, alas, it seems I wasn't careful enough. The end result is that I now have a "bottom" part (keyboard, motherboard, etc.) which is (presumably) still undamaged, but I need an entirely new screen assembly.
Has anyone ever replaced this Lcd and Digitizer. My digitizer has cracked and seems like the best bet is to buy the lcd and digitizer together.
I believe most phones have a serious adhesive under the digitizer pane so its worth just getting them together.
Here is what i am looking at. I am technically competent and confident i can take apart this phone without breaking it.
How does this screen look .
http://www.amazon.com/ePartSolution...qid=1425335732&sr=8-1&keywords=htc+one+m8+lcd
Having a cracked screen is not acceptable to me even if its small.
Replacing the screen is fairly easy on the m8 compared to the m7.. All you have to do is take the charging board off and the flex cables will slide out.. Try to save the tape.. I have gotten phones without it and they don't perform as they should. Watch this video it will help. http://youtu.be/f1qk8YSWg8k
If you've never done a screen replacement for you may want to take it or send it somewhere (and don't forget if it's less than 6 months old, HTC will replace it for free). It's certainly much easier than the M7, but for a beginner it's still one of the more difficult screen replacements. You may need to purchase the speaker grilles and some strong adhesive - I would recommend this - https://www.wholesalegadgetparts.com/product.php?productid=22096&cat=0&page=1 - it's the best stuff on the market. They have many different widths for sale on their site (I also highly recommend that site in general, but they are out of stock on M8 screens until the 16th - excellent warranty and best customer service in the business).
Hey everyone,
It's been a while since I last posted on here, and in attempting to avoid a pessimistic undertone, the G7 Power is actually a really good phone: the battery really does last for ages (I charge it once every two days, and it has never been below 40%), and it is surprisingly loud (everywhere). I am a pretty casual user now, rarely playing games or other media, but I am impressed with the difference compared to upgrading from a Moto G4. Some apps which appear as though they were designed for more premium screens - logos, icons, widgets - definitely lose some fidelity around the edges and these can look a bit poor on the 720p screen, but I have become oblivious (or distracted from) a lot of the finer details already.
And now the question: where, and how, would I be able to repair a cracked screen?
It feels like a pretty silly question; but the screen has 'developed' a crack from the bottom-right corner of the new notch, to about 2cm underneath the power button.
I say develop, as the phone is always within eyesight or kept in a pocket. It has never been dropped onto a surface harder than a pillow, and the case/screen protectors are still yet to arrive. It has been in my possession for about 12 days, and it lasted for 6/7 of those. I still have no clue when or why the crack appeared.
The question is a combination of where/when/how, I have contacted Motorola Technical Support, and explained the situation leading up to the cracked screen. The response was (exactly): "we do not process repair of the screen, what we offer is replacement of the whole device", they also said that this service will cost a fee (shipping + device) depending on the IMEI information. A single crack on the screen resulting in the replacement of a whole device seems pretty excessive, and the support member did not acknowledge that it is a brand new phone, or that it is* under warranty.
This is the first cracked screen from all previous handsets, so I am not sure what to do: is there any way to avoid replacing the whole device? How does this effect any warranty? What if I/whomever repairs the device creates other issues? When would services and replacement parts become available? XDA always has a someone whom is knowledgeable in these areas, and it would be great to hear some helpful advice from the community on how to proceed,
Thanks all,
MrSpuddy
(Also - the phone was bought directly from the Lenovo website - and I was hopeful that the "one free screen replacement" still worked)
mrSpuddy said:
Hey everyone,
[ quote edited to save space]
And now the question: where, and how, would I be able to repair a cracked screen?
Click to expand...
Click to collapse
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...
zerogun said:
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...
Click to expand...
Click to collapse
The solution provided by the company was just to buy a new phone; which was not very helpful at all. My collection of screen protectors arrived, and the one on the phone is a lot more robust than the original screen.
Thank you for providing the video.
These screens are very easy to replace... Multiple times...
I have the moto g7 and I have replaced the screen four times, and I'm getting another screen in the mail this weekend, because this *[email protected]_-HJN' SUCKS DONKEY WHATEVER. I like the phone, but for some reason, the screen doesn't like to stay in one piece. All you need is a hair dryer and a new screen. Amazon has them. But you have to watch out; there are counterfeits out there. Buy from two different vendors, and return the counterfeit. Here's how to tell: make sure the printing on the ribbon cable is the same as the one you're replacing. Make sure that the printing on the back plate is the same as the original. You won't know until you take the screen off, which replacement is legit. But it's just one connector and some glue. Way easy, or mail it to me and I'll fix it.