So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.
Mine is 2 months old and i had the clicking issue from the beginning but it didn't got worse and to be honest i don't even notice the clicks anymore (i guess that my brain got used to it ).
Inviato dal mio ASUS Transformer Pad TF700T con Tapatalk 2
Ok, thanks mate... hopefully it won't get any worse. I'll give it a week or two and see if mine spreads at all.
Nexus 7 has same problem
Sent from my Nexus 7 using Tapatalk 2
MisterEz said:
So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.
Click to expand...
Click to collapse
Send it back - that's not acceptable for a highend electronic product. You keep doin this until you get one with accaptable build quality or you buy another brand. Choice is yours. But never accept poor build quality in high end consumer electronics
Had mine for about 3 weeks and received a screen protector a couple of days ago, no problems with the screen but was worried applying the screen protector would show up any defects clickingwise. Panic over screen protector on and display is looking good.
Yeah, I think too many people here accept the fact that their unit has some fault and then just think "well, it could be worse. Be happy with what you got". No way! this should be THE high end tablet, one of the most expensive ones there are and then it has this kind of faults.
IF everybody would be same and think "well this is ok" then Asus wouldn't even learn from their mistakes. They would just keep on with the crappy QC and nothing would be fixed. Maybe they would even worsen the qc to save money and try to find out where is the line that people don't accept the product.
For me, I spend a lot of money and I want my unit be perfect out of the package. It is other issue then if I break it..
I too am having some screen issues, but I think I will have to send my unit back to ASUS completely. Most Dutch retailers only have a very short return period, and I've already had mine for 19 days. I guess I will contact the retailer and ask them what I should do. However, it is really unacceptable that you pay a high price for such a premium product and that it has issues that really should not ocur. The reason why I didn't go back to the retailer was because I didn't really notice it at first, it just got more annoying later on...
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Mine has the loose screen issue all around. But no clicking. So I'm having the same debate in my mind. I think I'm going to return and try for another one.
Sent from my PC36100 using xda app-developers app
I'm returning my 2nd TF700t tomorrow 'cause of loose screen. This time it also made the clicking sound :/
Mine has a loose screen but it's the lower left hand corner by the headphone jack, hdmi port, microphone area. You don't even need to squeeze it hard, it feels hollow in that area and it makes a crunching sound. My biggest fear is the ports there are either going to get damaged or cause a short touching the case. Amazon is sending me a replacement which I should have tomorrow.
Amazon was really gracious in taking my 201 back that I bought in May, but man, WTF, I love Tegra games so the samsung tab is out and I hate Samsung with their wishy washy update and the fact they stop supporting their legacy products fairly fast.
If this next one is trash I don't know what to do, I don't want to be banned by Amazon for returns, sucks ass.
Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.
MisterEz said:
Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.
Click to expand...
Click to collapse
If you check out the Nexus 7 forum (also an ASUS tablet) you can gleam some interesting information about the screen separation issues. It's not as easy to take the Infinity apart, so fixes aren't readily available, but I'm sure the issues are related.
I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.
Thats OK said:
I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.
Click to expand...
Click to collapse
From the ASUS Nexus 7 forums I understand that the loose screen/screen separation may be due to adhesion issues that can be somewhat or completely solved by gentle heat followed by light, consistent pressure. Someone did try that with his Infinity with limited results but I think his frame may not have fit properly as well. The crunching sound some have reported may be due to a really crunchy type of tape used to hold down the battery, if there's any excess flex that causes the screen/digitizer to touch the tape. There was also a screen lift/light bleed issue caused by over-tightened screws in the frame holding the motherboard, etc together. That was user fixable, by just loosening the screws and making sure that they were all fairly evenly tightened. That also really helped with the light bleed issues too.
I received my replacement from Amazon, this one is all good, it even has the cooler color screen I like compared to original, sweet!
I have just sent back my second tablet to amazon after receiving the first one with nearly jammed in buttons and a clicking screen. The second one I got had a little clicking to start and then got progressively worse until I chose to return it. Amazon emailed me and said that they are just going to refund me my money instead of sending out another one with probably similar problems... don't really know what to do now... any other good tablets coming out? Haha
Sent from my Galaxy Nexus using xda app-developers app
The way these tablets are held together is via a longer L shaped plastic edge on the faceplate that mates top edge first to a the ledge built into the backshell. Once inserted under the shell at the top edge the rest of the screen can lay down into the rest of the backshell. There are smaller L shaped clips up and down the outsides which click into place via finger pressure. The bottom edge is secured by two metal slide locks which mount the front to the back much like an old style door chain where the round part fits into a large hole and then slides into a narrower opening to latch it into place.
The point of this post? if the sides or top seem loose you can probably click them together with finger pressure. if the bottom is loose the latch got locked without the round part in place. for this you should return if you have warranty left. If it crunches they probably broke an L shaped clip while assembling.
I received my 2nd Infinity today and I immediately noticed the screen on the bottom left hand corner is above the frame and the rest of the bottom part of the screen flexes when I hold it normally. I'm sending it back. I'll give the Infinity one more chance and hope I get a good one. If not, I'll have to look at other options. At some point enough is enough.
My advice for anyone that has build quality issues with their Infinity is to return it. That is a lot of money to spend to keep a tablet that could break down the line. I wouldn't take any chances, but that's just me.
Seriously though, does anyone know of any other top end tabs coming out soon? I'm tired of dealing with sh*t quality
Sent from my Galaxy Nexus using xda app-developers app
Related
Hi, I I tried searching for this issue but couldn't find any thread specific to my problem. In darker lighting and on dark images or video I notice some bright blotches in the left center of my screen. It's a pain watching videos with it, but does not impede use of the device. Forgive me if this is common light bleed, but I thought that was exclusive to the edge of the device. Is there any fix I can do on my own or should I try and rma?
I would personally suggest an RMA, that doesn't look right somehow...
U have heavy lightbleed on the top and bottem left side of your screen.
But those blobs in the middel should not be there.
I would suggest a RMA
Sent from my Transformer TF101 using XDA Premium App
I had those on my 16GB that I RMA'ed....now my 32GB that I got as an exchange is starting to do it as well.
Starting to regret giving Asus another chance. Never trusted their products before and with good reason......
Thanks guys I'm going to try and return it to Fry's and get the new samsung galaxy tab instead.
You're the third person I've seen with this issue in the past week which is an alarming trend to say the least.
Did it develop over time? Was it there in the beginning? Check your serial number on the box for the revision code (starts with B, EX: B5O, B4O, B6O), which is it?
Definitely RMA. It's unacceptable when there's tons of light bleed on the edges but when it's in the center that's just ****ed.
Looks like I'm too late to return, I'll have to RMA. The serial number is B4O, and I suddenly noticed it, though it's quite possible that it happened over time, I don't recall it being there when I got it.
I am having the same issue, though not as bad. I will try to post pics when I get time.
I just can't decide if a RMA is worth it.... sigh.
My Serial starts with B4O as well.
Edit: Is this actually light bleed or something else? It looks like the IPS screen was impacted before install.
I just sent one back for having a white blob in the middle of the screen about 4mm in diameter I assumed that was light bleed of some description there was plenty round the edges too..
The really worrying thing is the replacement that has just arrived, if I apply light pressure on back of tablet about two inches above asus logo it looks like something is pushing against the screen you get all those rings and what looks like a rainbow effect. I noticed it when docked and moving the screen back and forth the same effect occurs.. I never saw this on my other one, is this just cos the unit is thin and flexes or is it another badly put together tab?
I love this product, why cant it just work
Sparky32 said:
I just sent one back for having a white blob in the middle of the screen about 4mm in diameter I assumed that was light bleed of some description there was plenty round the edges too..
The really worrying thing is the replacement that has just arrived, if I apply light pressure on back of tablet about two inches above asus logo it looks like something is pushing against the screen you get all those rings and what looks like a rainbow effect. I noticed it when docked and moving the screen back and forth the same effect occurs.. I never saw this on my other one, is this just cos the unit is thin and flexes or is it another badly put together tab?
I love this product, why cant it just work
Click to expand...
Click to collapse
I only notice mine at near full brightness, and with the room pitch black. They are pretty small too. I think I may just try to live with it, as it seems RMA isn't a 100% fix either. I'm afraid I'll be without it for 10-15 business days, and possibly end up with something worse!
yep mine seems to be much worse
Sparky32 said:
yep mine seems to be much worse
Click to expand...
Click to collapse
That's ridiculous. I shouldn't be afraid of more problems after sending my unit in as a RMA. I think I am just going to hold off and reevaluate the issues in a few months. I'm just worried that the dust in my screen will continue to get worse and worse.
Can anyone speak for a device with a different serial? Also, should I wait and see if ASUS actually fixes it, or RMA as soon as possible? On a side note I thought for RMA they would send me another one and I'd ship this one back when I got the other one, does ASUS not do this?
Sparky32 said:
yep mine seems to be much worse
Click to expand...
Click to collapse
What's your S/N prefix on the replacement?
This is how it will play out:
1. You call Asus and set up an RMA with the extremely rude customer service.
2. You pay return shipping (about $14-$20) to ship it back to them.
3. They take two weeks to wait for parts and then a week to repair and send it back to you.
4. They end up replacing the LCD and not doing a replacement for the whole unit. You get a "repair", not a "replacement".
5. If you so much as leave a single ding on the unit the service center will mark it OOW (Out of Warranty) and claim no liability for repairs because you damaged it.
At this point the light bleed is so bad you really have no choice.
Tubular said:
This is how it will play out:
1. You call Asus and set up an RMA with the extremely rude customer service.
2. You pay return shipping (about $14-$20) to ship it back to them.
3. They take two weeks to wait for parts and then a week to repair and send it back to you.
4. They end up replacing the LCD and not doing a replacement for the whole unit. You get a "repair", not a "replacement".
5. If you so much as leave a single ding on the unit the service center will mark it OOW (Out of Warranty) and claim no liability for repairs because you damaged it.
At this point the light bleed is so bad you really have no choice.
Click to expand...
Click to collapse
So at this point my options are to RMA and most likely not get a fix, keep it and try to ignore the lightbleed, wait for better manufactoring/repair and then RMA, or sell it for $180 on Gazelle or maybe more on Ebay/Amazon and use that to buy the thrive or tab instead. I'm leaning towards the first and maybe the last, but I'd be paying about $750 on the last one (calculating new tablet price by adding old price and subtracting the difference.). Suggestions?
Just noticed this on my transformer. It's barely a month old! Gonna take it down to the service centre tomorrow. Ridiculous.
Thewalrus0034 said:
Thanks guys I'm going to try and return it to Fry's and get the new samsung galaxy tab instead.
Click to expand...
Click to collapse
How'd this work out for ya? I was curious how the Galaxy camp was doing so been reading through the Galaxy 10.1 forums, geez I thought we had problems, lots of similar complaints over there about build quality, keyboard lag, reboots, etc and worse of all evidently alot of them have what they call Newtons Rings effect on the tab where the top glass presses against the LCD and makes water looking blotches some of them over half the screen and it changes with temperature lulz. I have seen that stuff before on anything with an Otterbox Defender case with that built in screen protector, those always do that and it's hideous I couldn't live with my tablet doing that.
I have just sent my tf101 back for the newton rings effect you describe.. Maybe galaxy tab ain't the answer either then
Sent from my GT-I9100 using XDA App
Rubbish...just got the replacement and its got the same dumb newton ring type issue, touch the screen and you get rings n blotches.. Time for a refund.. Wonder if its a bad batch
Sent from my GT-I9100 using XDA App
Just a quick question for other TF700 owners. I originally bought a Prime and had the bad wifi issues, exchanged it for another with no improvement so I held out for the Infinity. I now have my Infinity and the screen is loose on the right hand side about 2/3 of the way down. If you press it you can feel the give and hear a popping sound. I'm just curious if this is an isolated incident or if a loose screen an issue with the Infinity. I love the tablet and honestly have no clue what I would get instead but, for $500 I expect better build quality.
orangeirwin said:
Just a quick question for other TF700 owners. I originally bought a Prime and had the bad wifi issues, exchanged it for another with no improvement so I held out for the Infinity. I now have my Infinity and the screen is loose on the right hand side about 2/3 of the way down. If you press it you can feel the give and hear a popping sound. I'm just curious if this is an isolated incident or if a loose screen an issue with the Infinity. I love the tablet and honestly have no clue what I would get instead but, for $500 I expect better build quality.
Click to expand...
Click to collapse
I have this issue too. Both the right hand side and left hand side, and a few additional places (7 areas in total). When I closed pad on the dock station a crack formed between one of these two weak areas where screen is loose, and all points to glass cracking exactly because the strains were not supported by chassis. And I closed it the same way I closed it a few other times before (only owned it for about a month).
If you need more description in pictures, there's a thread about defects (it lists clicking/loose screen as one of defects by the way) in this same forum.
I hope that my crack is just an isolated case. This is only my personal opinion based on experience I had, but I would keep bothering the wherever you got your tablet until they give you one without loose screen.
orangeirwin said:
Just a quick question for other TF700 owners. I originally bought a Prime and had the bad wifi issues, exchanged it for another with no improvement so I held out for the Infinity. I now have my Infinity and the screen is loose on the right hand side about 2/3 of the way down. If you press it you can feel the give and hear a popping sound. I'm just curious if this is an isolated incident or if a loose screen an issue with the Infinity. I love the tablet and honestly have no clue what I would get instead but, for $500 I expect better build quality.
Click to expand...
Click to collapse
Mines clicking in the exact same spot you described. Doesn't seem to be getting worse, and if it doesn't I don't think it will bother me that much. But still, for the money we're paying its inexcusable.
Sent from my Samsung Galaxy S II Epic 4G Touch.
Same clicking above the microSD slot and on the opposite side -> same location. But it does not really bother me.
Mine clicks a little right above the dock port on the bottom.
I'm not considering it a problem at this point.
BPhoenix said:
I have this issue too. Both the right hand side and left hand side, and a few additional places (7 areas in total). When I closed pad on the dock station a crack formed between one of these two weak areas where screen is loose, and all points to glass cracking exactly because the strains were not supported by chassis. And I closed it the same way I closed it a few other times before (only owned it for about a month).
If you need more description in pictures, there's a thread about defects (it lists clicking/loose screen as one of defects by the way) in this same forum.
I hope that my crack is just an isolated case. This is only my personal opinion based on experience I had, but I would keep bothering the wherever you got your tablet until they give you one without loose screen.
Click to expand...
Click to collapse
In the Nexus 7 forum there were a number of complaints about the screen lifting, and most were found to be caused by screws that were over tightened below the areas of lift. The Nexus 7 back is easy to remove, and I wouldn't suggest doing this with the TF700, but they are both recent ASUS devices and there seems to be a possibility they could suffer from the same issue. By the way. it turns out that only a small % of Nexus 7 owners experienced screen lift, but some had multiple devices with this issue. Mine is flawless, as are the vast majority. I think that must be true for the TF700 as well. Mine is perfect, too.
Just checked. Mine has a VERY slight, not quite popping, but like a small"tic" when pressed by SD slot. Had to listen really close to hear it. My prime was nothing but problems, Wi-Fi weak, GPS totally worthless, and camera was unacceptably bad, grainy quality pics.
My Infinity is everything prime was not. Extremely pleased with it. Only problem I've noticed is I/O lag. And hopefully, that will be fixed with jelly bean.
One other thing, mine WOULD NOT OTA update. Had to d load to micro card.
Other than that, I LOVE MY INFINITY!
I don't see any issues with the building quality. I have not struggled to find flaws . my only complaint is lag and performance. Hopefully these are fixable sw issues that the jb update will fix or someone will create a good ROM to unleash this tablet.
Sent from my Galaxy Nexus using Tapatalk 2
Build quality for mine is terrific. No complaints at all at this point.
Sitting in the airport lounge right now where my TF201 didn't get a WiFi signal. TF700 has -50dB at 54Mbps.
Build quality and performance are exactly what I would expect for a premium priced tablet.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
My first one was perfect physically, but I had to return it. My second one has the popping on the left and there's noticeable give on the bottom, right above the left keyboard dock slot (that is, you can push the screen into the casing). I'm guessing its not a big deal since there are others who have reported similar things.
I have the popping sound when applying pressure to the display on the right side, kind of where the speaker sits. I used to have a slight bulge / screen seperation above the microSD slot, but that completely went away after I left my Infinity lieing in the sun for a few hours (not on purpose, I just forgot about it and that thing got HOT).
I hope this is an isolated case (though my "popping" wasn't so severe, I didn't pay attention to it either!), but just so you know, this is what happened when I normally (no extra force) closed it with my dock station.
I initially ignored the problem too. So be careful when handling it around dock station (if I'm right, it's only bending which is created by dock station that can do this, simply holding it in hand or closing dock station by holding it in middle will not cause any cracks or damage).
Topic.
1: Volume rocker did not work properly.
2: Many scratches on the backplate.
3: loose screen causing clicking noise.
Twice.
#1 - Wifi died after a week.
#2 - Screen was completely detached on one side out of the box.
Almost returned my third since it looked like the spring was missing from my SD card slot (that is, the card went in with no resistance and wouldn't push in to pop out)... but on a whim I decided to try it again right before I finished boxing it back up and it started working.
Its a great tablet, but Asus really needs to improve their quality control.
ZROW
Returned mine no times...
Thought about it-didn't do it.
0 cakes out of infinity
did not return my tablet, was flawless unit
Did the Infinity even come with plastic covers for the keyboard dock connections and the charging port like the TF201 model? The Infinity I saw, brand new right out of the box there were no plastic protective covers at all.
opentoe said:
Did the Infinity even come with plastic covers for the keyboard dock connections and the charging port like the TF201 model? The Infinity I saw, brand new right out of the box there were no plastic protective covers at all.
Click to expand...
Click to collapse
All three of mine had the cover on the dock connector itself, but not the two slots where it connected to the dock.
Edit: Sigh... Now I"m considering returning mine for the third time. When I got it, I noticed the screen could be pushed in a little along the bottom, like it wasnt completely attached but I figured it'd be ok since it was just one spot. Now its doing it along the top. My local best buy has them in-store now so I could exchange it no problems, but I've been holding off during my return period before unlocking and I dont want to push that back again...
I heard you can get banned for 90 days from Best Buy if you return too much... They scan your driver's license to keep a log of your returns. Not sure if it applies to defective tablets but they will probably assume that you're doing the damage one day. Anyways, time to exchange it.
Zero. Slight clicking sound. GPS is a bit slow. Nothing else.
4: Loose screen, clicking noise
5: Loose screen, clicking noise
6: Loose screen, clicking noise
7: 5 pieces of dust under screen.
This is outrageous.
Vibrating Motor didn't work at all.
This one is perfect. Everything works great. No creeking of the screen, no light bleed no problems what so ever. For now.
4 times....... 1- had dust under screen, 2- dead pixels, 3-dust under screen 4-dead pixels again, and the one I currently have seems like a keeper, I am used to it already as I had to do the same for the Prime and tf300 at least twice, but once I got a good one it held up good, Im very satisfied with the one I currently have. the infinity is clearly a beast!
8: dusts under screen
Finally got a good one on my ninth... everything is good except for the minor lightbleed but IDC I have found THE ONE!
ImYoungxD said:
8: dusts under screen
Finally got a good one on my ninth... everything is good except for the minor lightbleed but IDC I have found THE ONE!
Click to expand...
Click to collapse
I highly doubt you can go through 9 units in 2 days. Are you near a real store?
le rustle face
Keion said:
I highly doubt you can go through 9 units in 2 days. Are you near a real store?
le rustle face
Click to expand...
Click to collapse
I live between two BB stores that are under 3 miles away.
I work in the city where two BB stores are less than 1 mile away so I can walk.
I also open the box in the store after exchanging and check for problems. If I do, I exchange it again. Started this after my fourth exchange cause I was getting annoyed driving back and forth.
wow. I feel lucky. I got mine first week available in North America and have NO issues. no dust, no light bleed. Been working great. No complaints, except with Chome being a big laggy.
Zero.
Original TF101 - 7 TIMES. Yup..dead pixels, blemishes on screen, dead WIFI, crappy QA until I got a good one.
TF201 - Twice. Dead pixels, dead GPS. End of romance.
TF700 - Returned once. Original one had cosmetic imperfections (large dark stain/spot on the side), loose screen and clicking on left side of screen. Picked up another one, PERFECTION. No dead pixels, no clicking, no cosmetic damage.
Zero. No problems in 3 weeks.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
wow
Really This is shocking to hear. I bought mine online from america, because I couldnt buy the cheaper speced version here. But mine is perfect thank god. I do actually have a very slight clicky sound in one of the corners. But I'll live with that. I don't really know what I could do if this craps out on me.
Asus really need to work on their QC...
No returns on my infinity yet, I have had mine for almost 30 days (have 60days for BB returns). Have a 2yr ADH from square trade just incase. Looks like this infinity is a keeper.
My primes on the other hand was just a QC problems after QC problems... very dissapointed with the prime.
I purchased the TF700 from amazon and recieved this Friday shipped from France was very happy with it and last night spent a few hours playing around on it whilst docked with the keyboard i then folded it up (carefully) and put it in a safe place, this Morning I opened it and shocked to see there is a crack in the top left hand corner near the ASUS logo, I have been very carefull with it and not banged it or dropped it and not been heavy handed with it . I did a search on google and seen a thread on here regarding the prime and the screen cracking whilst docked and folded up . the designs look identical so this would seem the be the same problem, Im going to contact ASUS tomorrow but im not holding out much hope on a satisfactory outcome.. absolutely gutted first decent bit of kit i've bought in years and its bust in two days
thought i best warn people so they don't suffer the same fate.
daveharmo said:
I purchased the TF700 from amazon and recieved this Friday shipped from France was very happy with it and last night spent a few hours playing around on it whilst docked with the keyboard i then folded it up (carefully) and put it in a safe place, this Morning I opened it and shocked to see there is a crack in the top left hand corner near the ASUS logo, I have been very carefull with it and not banged it or dropped it and not been heavy handed with it . I did a search on google and seen a thread on here regarding the prime and the screen cracking whilst docked and folded up . the designs look identical so this would seem the be the same problem, Im going to contact ASUS tomorrow but im not holding out much hope on a satisfactory outcome.. absolutely gutted first decent bit of kit i've bought in years and its bust in two days
thought i best warn people so they don't suffer the same fate.
Click to expand...
Click to collapse
Same for me, though put screen protector on it now, and you can't see it anymore and its works the same. Though the stress if off the glass so it wont break again, I think its a big fault of ASUS. To not fix this if a previous model had the same fault.
f700 cracked screen as well
I have the same problem as well. I have a two week old and found a crack in the screen this evening. It looks like the glass is slightly bent outward meaning it's a stress fracture and not caused by dropping the tablet op dropping something on the tablet.
It looks like this is always a problem in combination with the dock. I've found other threads here and on transformerforums dot com (can't post direct link as new member).
I wasn't aware of this problem. If I was I wouldn't have bought the dock. I really wanted to like this tablet but it's not off to a good start.
Just heard about this issue; being my first ever tablet would hate to have it happen, I feel for you
When you open it do you open from the centre? I read on another forum lifting a corner can put stress on it.
Same for me. 3 days old tab and a broken screen when i wanted to pull out the tab from the dockingstation carefully. Cracked screen from the upper left to the upper right side. Asus say it is my fault an i have to pay for repair. I hate Asus for this and i'll never ever buy a product of this company.
Any change to see picture/s of these cracks?
Sent from my LT18i using XDA Premium HD app
This is just one reason why Square trade Warranty is a really good idea... http://forum.xda-developers.com/showthread.php?t=1903575 is another.
Here is my picture. Crack is hard to see on a photo. From top left to the top right.
yeah that stinks. i honestly don't know if they would even warranty RMA that or not. I keep mine docked almost all the time for the past idk 6 months (TF201 and now TF700) and have yet to have an issue. I think some tabs are manufactured in such a way that the screen pops out a little and the closing of the dock/tab combo puts stress on the glass causing breakage. sorry to see that
Inuit said:
Here is my picture. Crack is hard to see on a photo. From top left to the top right.
Click to expand...
Click to collapse
Now that sucks
I would take it back to where you got it from and have them send it back to Asus if you only had it a couple days. Paying $500 for it and it cracked in two days, that's crazy. They will just send it back to Asus.
I already sent it back to amazon.de.
They sent it back to me and told me that a broken glass is always the fault of the user. Nice customer service I sent it to Asus and same story. Broken display is always user intendet. No warranty. Nice customer service from Asus. Believe me i will never ever buy a Asus product again.
Are you in the uk? Did you purchase by credit card m if so they are equally liable along with the retailer, and in this case there seems enough reports to suggest this is a common design flaw, so take it up with them citing the significant number of reports here?
Sent from my GT-I9300 using Tapatalk 2
I hate to say this, but it is not hard to see that problem. Am sorry you have to go though this.
This is why
SENT FROM ASUS INFINITY TF700
Stay away from ASUS Products
daveharmo said:
I purchased the TF700 from amazon and recieved this Friday shipped from France was very happy with it and last night spent a few hours playing around on it whilst docked with the keyboard i then folded it up (carefully) and put it in a safe place, this Morning I opened it and shocked to see there is a crack in the top left hand corner near the ASUS logo, I have been very carefull with it and not banged it or dropped it and not been heavy handed with it . I did a search on google and seen a thread on here regarding the prime and the screen cracking whilst docked and folded up . the designs look identical so this would seem the be the same problem, Im going to contact ASUS tomorrow but im not holding out much hope on a satisfactory outcome.. absolutely gutted first decent bit of kit i've bought in years and its bust in two days
thought i best warn people so they don't suffer the same fate.
Click to expand...
Click to collapse
Same thing happened to my less than 2 month old TF700. Crack is across the screen from left to right 1/3 from the top. I just opened it one morning and the crack was there. No bumgs, no drops, the exterior was crack, bump free. Sent it to their service center and their head tech stated that it was user induced damage and even implied that my device was already opened 'coz of "scratches" in the locking mechanism. I talked to their tech and he said that all their products are quality checked and there was no way that the crack was caused by faulty assembly, and I pointed out that there was a loose bulge on the left and right side of the tablet, but he wasn't able to give me a reason. He said that he's the last word on it and it's a dead end.
I guess that's what Asus calls VIP Treatment for their customers.
for3play said:
Same thing happened to my less than 2 month old TF700. Crack is across the screen from left to right 1/3 from the top. I just opened it one morning and the crack was there. No bumgs, no drops, the exterior was crack, bump free. Sent it to their service center and their head tech stated that it was user induced damage and even implied that my device was already opened 'coz of "scratches" in the locking mechanism. I talked to their tech and he said that all their products are quality checked and there was no way that the crack was caused by faulty assembly, and I pointed out that there was a loose bulge on the left and right side of the tablet, but he wasn't able to give me a reason. He said that he's the last word on it and it's a dead end.
I guess that's what Asus calls VIP Treatment for their customers.
Click to expand...
Click to collapse
Wow, this is the exact opposite experience that I have had with them on this issue. I support a number of these that are used as thin client replacements for sales staff and several of them have gone through this process due to unexplainable cracks in their screen. In all 4 cases that I know of, Asus did the repair for free. Since a cracked screen is really not something that I can do anything for, I have been having them RMA the unit themselves. They have never had a problem and in most cases had it back in a couple weeks(longest was 3). I am in the US and I am pretty sure they have been sent to the Texas repair center.
I told the users when they called to explain that it has not been dropped, or banged into anything, there are no visible signs of damage other than the screen crack... and that you believe the crack might have been caused by the dock.
Sorry for the unlucky others who have been met with accusations and refusal. FYI- sometimes it helps to complain to the higher ups or maybe Gary or Tien- they have always been willing to help or at least refer me to someone who can give me more than the standard RMA treatment.
Hello,
I've bought my infinity two weeks ago and when I unpacked it I had noticed that on the bottom left side of the panel the screen is popping out a little bit, something like screen flex.
Yesterday, I've noticed that the left side of the panel has a flex as well.
I am really annoyed by this, since OK, I've paid a lot of money for this and now I might have to send it for a repair.
I've talked with the asus support in Greece, and the guy told me to submit a form that he would send me via email and a courier would get it from my house and it would be sent to Czech Republic for service and it would be delivered to me in a maximum of ten days.
Should I send it?
Is it really a big problem? (in example, will the whole panel pop out eventually :silly: )
I though of keeping it for some time and if it gets worse, then sending it..
What do you think?
Thank you for your time,
Sorry for the big post..
did you bu it from a store, or online? if from online, send it back to the company and have them send you another. this might be quicker than sending to ASUS.
I bought it from a store in Greece..I called them and they referred me to Asus support in Greece..
Is this screen flexing a big problem or I can leave with it?
pspuser007 said:
I bought it from a store in Greece..I called them and they referred me to Asus support in Greece..
Is this screen flexing a big problem or I can leave with it?
Click to expand...
Click to collapse
i dont see they the store cant exchange it. especially if you have the receipt.
im not sure if its a big problem, but i wouldnt want a device that has defects like that.
timrock said:
i dont see they the store cant exchange it. especially if you have the receipt.
im not sure if its a big problem, but i wouldnt want a device that has defects like that.
Click to expand...
Click to collapse
They won't
I might keep it for a while..I've stopped noticing it too much..The thing is, if it's something normal that did occur from the manufacturing process then I'm OK with it. I just don't want to end up holding the tablet at one hand and its screen at the other
pspuser007 said:
They won't
I might keep it for a while..I've stopped noticing it too much..The thing is, if it's something normal that did occur from the manufacturing process then I'm OK with it. I just don't want to end up holding the tablet at one hand and its screen at the other
Click to expand...
Click to collapse
From what I've read this is very normal for the Infinity. A lot of people have had similar problems with screen flex or even screen separation. Unfortunately most of them when the receive a replacement, the replacement is either the exact same problem or is even worse. So there is definitely something with the Gorilla Glass and their manufacturing process causing this that they haven't ironed out yet.
From what I've read if it's minor then it shouldn't be too big a problem (some people have the Gorilla Glass almost peeling off). I just got mine and notice the screen sticks up slightly above one of the dock connection points on mine, but knowing the problems others have had I'll use mine for a few days to see if it's worth returning.
So while you can certainly return if you want, considering what you paid it's understandable. But just know that the replacement you get is likely to have at least the same problem, and might actually be worse then the one you sent in. Another somewhat common problem is light bleed, which I think I have on mine also.
bobby2478 said:
From what I've read this is very normal for the Infinity. A lot of people have had similar problems with screen flex or even screen separation. Unfortunately most of them when the receive a replacement, the replacement is either the exact same problem or is even worse. So there is definitely something with the Gorilla Glass and their manufacturing process causing this that they haven't ironed out yet.
From what I've read if it's minor then it shouldn't be too big a problem (some people have the Gorilla Glass almost peeling off). I just got mine and notice the screen sticks up slightly above one of the dock connection points on mine, but knowing the problems others have had I'll use mine for a few days to see if it's worth returning.
So while you can certainly return if you want, considering what you paid it's understandable. But just know that the replacement you get is likely to have at least the same problem, and might actually be worse then the one you sent in. Another somewhat common problem is light bleed, which I think I have on mine also.
Click to expand...
Click to collapse
I've noticed the same across the bottom in mine. It appears exactly where the docking latched are located. I'm no longer going to leave the dock attached. I'll hook it when I really need it then remove and put it aside. I'd say the dock is putting too much strain on the glass. The docking hinge on mine is VERY tight to flip;p open and closed as well