Database Info

[Q] Blue blotches on screen?

Hi, I I tried searching for this issue but couldn't find any thread specific to my problem. In darker lighting and on dark images or video I notice some bright blotches in the left center of my screen. It's a pain watching videos with it, but does not impede use of the device. Forgive me if this is common light bleed, but I thought that was exclusive to the edge of the device. Is there any fix I can do on my own or should I try and rma?

I would personally suggest an RMA, that doesn't look right somehow...

U have heavy lightbleed on the top and bottem left side of your screen.
But those blobs in the middel should not be there.
I would suggest a RMA
Sent from my Transformer TF101 using XDA Premium App

I had those on my 16GB that I RMA'ed....now my 32GB that I got as an exchange is starting to do it as well.
Starting to regret giving Asus another chance. Never trusted their products before and with good reason......

Thanks guys I'm going to try and return it to Fry's and get the new samsung galaxy tab instead.

You're the third person I've seen with this issue in the past week which is an alarming trend to say the least.
Did it develop over time? Was it there in the beginning? Check your serial number on the box for the revision code (starts with B, EX: B5O, B4O, B6O), which is it?
Definitely RMA. It's unacceptable when there's tons of light bleed on the edges but when it's in the center that's just ****ed.

Looks like I'm too late to return, I'll have to RMA. The serial number is B4O, and I suddenly noticed it, though it's quite possible that it happened over time, I don't recall it being there when I got it.

I am having the same issue, though not as bad. I will try to post pics when I get time.
I just can't decide if a RMA is worth it.... sigh.
My Serial starts with B4O as well.
Edit: Is this actually light bleed or something else? It looks like the IPS screen was impacted before install.

I just sent one back for having a white blob in the middle of the screen about 4mm in diameter I assumed that was light bleed of some description there was plenty round the edges too..
The really worrying thing is the replacement that has just arrived, if I apply light pressure on back of tablet about two inches above asus logo it looks like something is pushing against the screen you get all those rings and what looks like a rainbow effect. I noticed it when docked and moving the screen back and forth the same effect occurs.. I never saw this on my other one, is this just cos the unit is thin and flexes or is it another badly put together tab?
I love this product, why cant it just work

Sparky32 said:
I just sent one back for having a white blob in the middle of the screen about 4mm in diameter I assumed that was light bleed of some description there was plenty round the edges too..
The really worrying thing is the replacement that has just arrived, if I apply light pressure on back of tablet about two inches above asus logo it looks like something is pushing against the screen you get all those rings and what looks like a rainbow effect. I noticed it when docked and moving the screen back and forth the same effect occurs.. I never saw this on my other one, is this just cos the unit is thin and flexes or is it another badly put together tab?
I love this product, why cant it just work
Click to expand...
Click to collapse
I only notice mine at near full brightness, and with the room pitch black. They are pretty small too. I think I may just try to live with it, as it seems RMA isn't a 100% fix either. I'm afraid I'll be without it for 10-15 business days, and possibly end up with something worse!

yep mine seems to be much worse

Sparky32 said:
yep mine seems to be much worse
Click to expand...
Click to collapse
That's ridiculous. I shouldn't be afraid of more problems after sending my unit in as a RMA. I think I am just going to hold off and reevaluate the issues in a few months. I'm just worried that the dust in my screen will continue to get worse and worse.

Can anyone speak for a device with a different serial? Also, should I wait and see if ASUS actually fixes it, or RMA as soon as possible? On a side note I thought for RMA they would send me another one and I'd ship this one back when I got the other one, does ASUS not do this?

Sparky32 said:
yep mine seems to be much worse
Click to expand...
Click to collapse
What's your S/N prefix on the replacement?

This is how it will play out:
1. You call Asus and set up an RMA with the extremely rude customer service.
2. You pay return shipping (about $14-$20) to ship it back to them.
3. They take two weeks to wait for parts and then a week to repair and send it back to you.
4. They end up replacing the LCD and not doing a replacement for the whole unit. You get a "repair", not a "replacement".
5. If you so much as leave a single ding on the unit the service center will mark it OOW (Out of Warranty) and claim no liability for repairs because you damaged it.
At this point the light bleed is so bad you really have no choice.

Tubular said:
This is how it will play out:
1. You call Asus and set up an RMA with the extremely rude customer service.
2. You pay return shipping (about $14-$20) to ship it back to them.
3. They take two weeks to wait for parts and then a week to repair and send it back to you.
4. They end up replacing the LCD and not doing a replacement for the whole unit. You get a "repair", not a "replacement".
5. If you so much as leave a single ding on the unit the service center will mark it OOW (Out of Warranty) and claim no liability for repairs because you damaged it.
At this point the light bleed is so bad you really have no choice.
Click to expand...
Click to collapse
So at this point my options are to RMA and most likely not get a fix, keep it and try to ignore the lightbleed, wait for better manufactoring/repair and then RMA, or sell it for $180 on Gazelle or maybe more on Ebay/Amazon and use that to buy the thrive or tab instead. I'm leaning towards the first and maybe the last, but I'd be paying about $750 on the last one (calculating new tablet price by adding old price and subtracting the difference.). Suggestions?

Just noticed this on my transformer. It's barely a month old! Gonna take it down to the service centre tomorrow. Ridiculous.

Thewalrus0034 said:
Thanks guys I'm going to try and return it to Fry's and get the new samsung galaxy tab instead.
Click to expand...
Click to collapse
How'd this work out for ya? I was curious how the Galaxy camp was doing so been reading through the Galaxy 10.1 forums, geez I thought we had problems, lots of similar complaints over there about build quality, keyboard lag, reboots, etc and worse of all evidently alot of them have what they call Newtons Rings effect on the tab where the top glass presses against the LCD and makes water looking blotches some of them over half the screen and it changes with temperature lulz. I have seen that stuff before on anything with an Otterbox Defender case with that built in screen protector, those always do that and it's hideous I couldn't live with my tablet doing that.

I have just sent my tf101 back for the newton rings effect you describe.. Maybe galaxy tab ain't the answer either then
Sent from my GT-I9100 using XDA App

Rubbish...just got the replacement and its got the same dumb newton ring type issue, touch the screen and you get rings n blotches.. Time for a refund.. Wonder if its a bad batch
Sent from my GT-I9100 using XDA App

Build quality question

Just a quick question for other TF700 owners. I originally bought a Prime and had the bad wifi issues, exchanged it for another with no improvement so I held out for the Infinity. I now have my Infinity and the screen is loose on the right hand side about 2/3 of the way down. If you press it you can feel the give and hear a popping sound. I'm just curious if this is an isolated incident or if a loose screen an issue with the Infinity. I love the tablet and honestly have no clue what I would get instead but, for $500 I expect better build quality.

orangeirwin said:
Just a quick question for other TF700 owners. I originally bought a Prime and had the bad wifi issues, exchanged it for another with no improvement so I held out for the Infinity. I now have my Infinity and the screen is loose on the right hand side about 2/3 of the way down. If you press it you can feel the give and hear a popping sound. I'm just curious if this is an isolated incident or if a loose screen an issue with the Infinity. I love the tablet and honestly have no clue what I would get instead but, for $500 I expect better build quality.
Click to expand...
Click to collapse
I have this issue too. Both the right hand side and left hand side, and a few additional places (7 areas in total). When I closed pad on the dock station a crack formed between one of these two weak areas where screen is loose, and all points to glass cracking exactly because the strains were not supported by chassis. And I closed it the same way I closed it a few other times before (only owned it for about a month).
If you need more description in pictures, there's a thread about defects (it lists clicking/loose screen as one of defects by the way) in this same forum.
I hope that my crack is just an isolated case. This is only my personal opinion based on experience I had, but I would keep bothering the wherever you got your tablet until they give you one without loose screen.

orangeirwin said:
Just a quick question for other TF700 owners. I originally bought a Prime and had the bad wifi issues, exchanged it for another with no improvement so I held out for the Infinity. I now have my Infinity and the screen is loose on the right hand side about 2/3 of the way down. If you press it you can feel the give and hear a popping sound. I'm just curious if this is an isolated incident or if a loose screen an issue with the Infinity. I love the tablet and honestly have no clue what I would get instead but, for $500 I expect better build quality.
Click to expand...
Click to collapse
Mines clicking in the exact same spot you described. Doesn't seem to be getting worse, and if it doesn't I don't think it will bother me that much. But still, for the money we're paying its inexcusable.
Sent from my Samsung Galaxy S II Epic 4G Touch.

Same clicking above the microSD slot and on the opposite side -> same location. But it does not really bother me.

Mine clicks a little right above the dock port on the bottom.
I'm not considering it a problem at this point.

BPhoenix said:
I have this issue too. Both the right hand side and left hand side, and a few additional places (7 areas in total). When I closed pad on the dock station a crack formed between one of these two weak areas where screen is loose, and all points to glass cracking exactly because the strains were not supported by chassis. And I closed it the same way I closed it a few other times before (only owned it for about a month).
If you need more description in pictures, there's a thread about defects (it lists clicking/loose screen as one of defects by the way) in this same forum.
I hope that my crack is just an isolated case. This is only my personal opinion based on experience I had, but I would keep bothering the wherever you got your tablet until they give you one without loose screen.
Click to expand...
Click to collapse
In the Nexus 7 forum there were a number of complaints about the screen lifting, and most were found to be caused by screws that were over tightened below the areas of lift. The Nexus 7 back is easy to remove, and I wouldn't suggest doing this with the TF700, but they are both recent ASUS devices and there seems to be a possibility they could suffer from the same issue. By the way. it turns out that only a small % of Nexus 7 owners experienced screen lift, but some had multiple devices with this issue. Mine is flawless, as are the vast majority. I think that must be true for the TF700 as well. Mine is perfect, too.

Just checked. Mine has a VERY slight, not quite popping, but like a small"tic" when pressed by SD slot. Had to listen really close to hear it. My prime was nothing but problems, Wi-Fi weak, GPS totally worthless, and camera was unacceptably bad, grainy quality pics.
My Infinity is everything prime was not. Extremely pleased with it. Only problem I've noticed is I/O lag. And hopefully, that will be fixed with jelly bean.
One other thing, mine WOULD NOT OTA update. Had to d load to micro card.
Other than that, I LOVE MY INFINITY!

I don't see any issues with the building quality. I have not struggled to find flaws . my only complaint is lag and performance. Hopefully these are fixable sw issues that the jb update will fix or someone will create a good ROM to unleash this tablet.
Sent from my Galaxy Nexus using Tapatalk 2

Build quality for mine is terrific. No complaints at all at this point.
Sitting in the airport lounge right now where my TF201 didn't get a WiFi signal. TF700 has -50dB at 54Mbps.
Build quality and performance are exactly what I would expect for a premium priced tablet.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

My first one was perfect physically, but I had to return it. My second one has the popping on the left and there's noticeable give on the bottom, right above the left keyboard dock slot (that is, you can push the screen into the casing). I'm guessing its not a big deal since there are others who have reported similar things.

I have the popping sound when applying pressure to the display on the right side, kind of where the speaker sits. I used to have a slight bulge / screen seperation above the microSD slot, but that completely went away after I left my Infinity lieing in the sun for a few hours (not on purpose, I just forgot about it and that thing got HOT).

I hope this is an isolated case (though my "popping" wasn't so severe, I didn't pay attention to it either!), but just so you know, this is what happened when I normally (no extra force) closed it with my dock station.
I initially ignored the problem too. So be careful when handling it around dock station (if I'm right, it's only bending which is created by dock station that can do this, simply holding it in hand or closing dock station by holding it in middle will not cause any cracks or damage).

The loose/unbonded screen issue...

So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.

Mine is 2 months old and i had the clicking issue from the beginning but it didn't got worse and to be honest i don't even notice the clicks anymore (i guess that my brain got used to it ).
Inviato dal mio ASUS Transformer Pad TF700T con Tapatalk 2

Ok, thanks mate... hopefully it won't get any worse. I'll give it a week or two and see if mine spreads at all.

Nexus 7 has same problem
Sent from my Nexus 7 using Tapatalk 2

MisterEz said:
So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.
Click to expand...
Click to collapse
Send it back - that's not acceptable for a highend electronic product. You keep doin this until you get one with accaptable build quality or you buy another brand. Choice is yours. But never accept poor build quality in high end consumer electronics

Had mine for about 3 weeks and received a screen protector a couple of days ago, no problems with the screen but was worried applying the screen protector would show up any defects clickingwise. Panic over screen protector on and display is looking good.

Yeah, I think too many people here accept the fact that their unit has some fault and then just think "well, it could be worse. Be happy with what you got". No way! this should be THE high end tablet, one of the most expensive ones there are and then it has this kind of faults.
IF everybody would be same and think "well this is ok" then Asus wouldn't even learn from their mistakes. They would just keep on with the crappy QC and nothing would be fixed. Maybe they would even worsen the qc to save money and try to find out where is the line that people don't accept the product.
For me, I spend a lot of money and I want my unit be perfect out of the package. It is other issue then if I break it..

I too am having some screen issues, but I think I will have to send my unit back to ASUS completely. Most Dutch retailers only have a very short return period, and I've already had mine for 19 days. I guess I will contact the retailer and ask them what I should do. However, it is really unacceptable that you pay a high price for such a premium product and that it has issues that really should not ocur. The reason why I didn't go back to the retailer was because I didn't really notice it at first, it just got more annoying later on...
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

Mine has the loose screen issue all around. But no clicking. So I'm having the same debate in my mind. I think I'm going to return and try for another one.
Sent from my PC36100 using xda app-developers app

I'm returning my 2nd TF700t tomorrow 'cause of loose screen. This time it also made the clicking sound :/

Mine has a loose screen but it's the lower left hand corner by the headphone jack, hdmi port, microphone area. You don't even need to squeeze it hard, it feels hollow in that area and it makes a crunching sound. My biggest fear is the ports there are either going to get damaged or cause a short touching the case. Amazon is sending me a replacement which I should have tomorrow.
Amazon was really gracious in taking my 201 back that I bought in May, but man, WTF, I love Tegra games so the samsung tab is out and I hate Samsung with their wishy washy update and the fact they stop supporting their legacy products fairly fast.
If this next one is trash I don't know what to do, I don't want to be banned by Amazon for returns, sucks ass.

Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.

MisterEz said:
Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.
Click to expand...
Click to collapse
If you check out the Nexus 7 forum (also an ASUS tablet) you can gleam some interesting information about the screen separation issues. It's not as easy to take the Infinity apart, so fixes aren't readily available, but I'm sure the issues are related.

I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.

Thats OK said:
I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.
Click to expand...
Click to collapse
From the ASUS Nexus 7 forums I understand that the loose screen/screen separation may be due to adhesion issues that can be somewhat or completely solved by gentle heat followed by light, consistent pressure. Someone did try that with his Infinity with limited results but I think his frame may not have fit properly as well. The crunching sound some have reported may be due to a really crunchy type of tape used to hold down the battery, if there's any excess flex that causes the screen/digitizer to touch the tape. There was also a screen lift/light bleed issue caused by over-tightened screws in the frame holding the motherboard, etc together. That was user fixable, by just loosening the screws and making sure that they were all fairly evenly tightened. That also really helped with the light bleed issues too.

I received my replacement from Amazon, this one is all good, it even has the cooler color screen I like compared to original, sweet!

I have just sent back my second tablet to amazon after receiving the first one with nearly jammed in buttons and a clicking screen. The second one I got had a little clicking to start and then got progressively worse until I chose to return it. Amazon emailed me and said that they are just going to refund me my money instead of sending out another one with probably similar problems... don't really know what to do now... any other good tablets coming out? Haha
Sent from my Galaxy Nexus using xda app-developers app

The way these tablets are held together is via a longer L shaped plastic edge on the faceplate that mates top edge first to a the ledge built into the backshell. Once inserted under the shell at the top edge the rest of the screen can lay down into the rest of the backshell. There are smaller L shaped clips up and down the outsides which click into place via finger pressure. The bottom edge is secured by two metal slide locks which mount the front to the back much like an old style door chain where the round part fits into a large hole and then slides into a narrower opening to latch it into place.
The point of this post? if the sides or top seem loose you can probably click them together with finger pressure. if the bottom is loose the latch got locked without the round part in place. for this you should return if you have warranty left. If it crunches they probably broke an L shaped clip while assembling.

I received my 2nd Infinity today and I immediately noticed the screen on the bottom left hand corner is above the frame and the rest of the bottom part of the screen flexes when I hold it normally. I'm sending it back. I'll give the Infinity one more chance and hope I get a good one. If not, I'll have to look at other options. At some point enough is enough.
My advice for anyone that has build quality issues with their Infinity is to return it. That is a lot of money to spend to keep a tablet that could break down the line. I wouldn't take any chances, but that's just me.

Seriously though, does anyone know of any other top end tabs coming out soon? I'm tired of dealing with sh*t quality
Sent from my Galaxy Nexus using xda app-developers app

How I got my perfect Infinity

Thought I share how I got my "perfect" Infinity.
My first one had a couple of dead pixels smack in the middle of the screen. And it was slow as hell. Every couple of seconds, it would slow down... even after the update. I read online about I/O issues and how the JB update would improve it. But that dead pixels in the middle of the screen was a deal breaker. I returned it and ordered a new one. This one was great. No dead pixels. And much snappier after the update. But I started to notice "clicking" noise when I pressed the edges... I read about how the Gorilla Glass was supposed to have some flex... So I pressed on. But it got worse and worse. I even called Asus and the tech guys said, it was supposed to have some flex and some clicking was normal. But if I felt like the screen was separating, then I should return it. How was I supposed to tell the difference? Only heaven would know. In fact, every other aspect about the tablet was fine. Snappy, no light bleed, no HDMI probelm. audio worked.... But the clicking was like plague... It kept spreading! to the entire top edge! Well, I returned it. Ordered a new one. The third one was good build except it had DIRT under the screen. I was about to accept my fate. I told myself, "it's just some dirt..." But it was on the top left corner where the tabs are on browsers! which meant I kept seeing the dirt every time I looked at the screen. So. I got a new one. My 4th one was perfect. Good build. Absolutely no clicking. Very snappy. The difference between the first three and this in terms of smoothness was night and day... Audio out worked. No light bleeding. No dead pixels. No dirt. and I tested the HDMI out... no picture on my screen. I was like @#$%^@$%^. I got a new cable and it was the cable.
The serial numbers. I do not remember the first one. The last three were all C6 lines but progressively higher numbers.
So if anyone is out there with a less than perfect tablet, it's your money. Keep exchanging it until it make you happy.

Where did you buy this tablet from?

When will people learn.

You would really go through 4 tablets to get a good one - Forget that . . I returned one, and I think I am done. Asus is going to lose money on this model too because of all the returns.

File this under "Cool story, bro."

jrkart99 said:
File this under "Cool story, bro."
Click to expand...
Click to collapse
The OP is a perfect case study of the anal retentive geek squad. All he had to do is look at it the wrong way and he'd return it...

opentoe said:
When will people learn.
Click to expand...
Click to collapse
When idiots stop sh!tposting.
(Read: never)
le rustle face

build quality issues still present

I purchased my first tf700 from Newegg 5 or 6 weeks ago. The build was excellent. No screen separation issues and little light bleed. I ended up RMAing the device due to a weird screen issue where it was randomly tapping/swiping by itself every now and then.
I just received my new device which has an 80 serial number, and the screen is separating. If you sight down the edge of the top you can see that it actually bows out quite a bit toward the middle, and it clicks when I press it. SO FRUSTRATING!
Newegg's RMA procedure is as painless as it can be for an online purchase, but I think I'll return this one for a refund and purchase from Best Buy so I don't have to spend the foreseeable future shipping Infinities back and forth.

yeah
esoxx said:
I purchased my first tf700 from Newegg 5 or 6 weeks ago. The build was excellent. No screen separation issues and little light bleed. I ended up RMAing the device due to a weird screen issue where it was randomly tapping/swiping by itself every now and then.
I just received my new device which has an 80 serial number, and the screen is separating. If you sight down the edge of the top you can see that it actually bows out quite a bit toward the middle, and it clicks when I press it. SO FRUSTRATING!
Newegg's RMA procedure is as painless as it can be for an online purchase, but I think I'll return this one for a refund and purchase from Best Buy so I don't have to spend the foreseeable future shipping Infinities back and forth.
Click to expand...
Click to collapse
I bought one off amazon everything was great, then the corner of the screen start to click when I picked it up. :/ it was so perfect..............................................................................

Guys, there are like a thousand threads on these same issues already here, each with perfect solutions for dealing with the situation should it arise. Must we have yet another negative TF700 thread? My 700 is perfect, and so are the majority of people's as well. Continuing to populate the forums with these types of threads though does nothing but scare away potential developers from wanting to shell out the cash to pick up one of these tabs and develop awesome roms for us!
I do not mean to sound rude, nor am I flaming, but please, mods lock this thread before it spirals into something worse.

I agree with theanarchist that this is the same thread that we've all seen. But I also don't think most peoples tabs Are perfect. Some (like me) are still trying to find a perfect one And some have just accepted what they have and have given up. Others (like you) managed to get a perfect one.
Sent from my Galaxy Nexus using xda app-developers app

Mine is perfect as well. My mother, my uncle, my best friend Craig, and my in laws have a perfect unit too. So when I see threads like this, it makes me wonder if people have an agenda.

xRevilatioNx said:
Mine is perfect as well. My mother, my uncle, my best friend Craig, and my in laws have a perfect unit too. So when I see threads like this, it makes me wonder if people have an agenda.
Click to expand...
Click to collapse
Mine's not perfect, clicking near the hdmi port and you can click it from a good portion up towards the middle of the screen. I personally gave up on Asus, though hearing that there are people that have indeed perfect ones makes me wish I had exchanged it. I was hesitant because I had already returned a tf300 (screen issue) and then later the Prime that I had replaced the tf300 with. I had only returned the Prime to get the tf700, as I was pretty frustrated I couldn't get the gps to work EVEN with the dongle Asus sent me. I didn't have any wifi issues really nor any screen clicking issues with the Prime and though I like the infinity the screen clicking annoys me. Wondering if I should rma it directly to them, just don't want to get a different tab back or been in a worse situation as a result.

TheAnarchist1 said:
Guys, there are like a thousand threads on these same issues already here, each with perfect solutions for dealing with the situation should it arise. Must we have yet another negative TF700 thread? My 700 is perfect, and so are the majority of people's as well. Continuing to populate the forums with these types of threads though does nothing but scare away potential developers from wanting to shell out the cash to pick up one of these tabs and develop awesome roms for us!
I do not mean to sound rude, nor am I flaming, but please, mods lock this thread before it spirals into something worse.
Click to expand...
Click to collapse
There was an earlier thread that theorized that the build issues were being addressed in the more recently built devices. I posted to show that even with the more recent 80 serial number devices, the same issues are present on at least a percentage of tf700s.

I certainly have no agenda. I'm on my second Infinity, which will unfortunately also be going back. The first one had some extreme screen separation on the right hand side. It was an C06 serial number. The one I'm on now, my second is a C80 serial number. The screen is good, with just a slight clicking in one spot on the right hand side. I'd live with it. However the light leaking out onto the screen along the bottom and right side from the LEDs is very very noticible.
I won't give up. I really love everything about the TF700 except for the build quality issues that I have experienced. I think the OP has a valid point in saying that the issues are not fixed yet. When my second unit came, I was psyched to see the serial number on the box said C80. I was very disappointed that it too has issues.

I think...
I think the screen seperation can be because of the humidity. Where do u live?

killerdan56 said:
I think the screen seperation can be because of the humidity. Where do u live?
Click to expand...
Click to collapse
I don't think it's humidity. I live on the west coast of the US. Pretty dry here. I noticed a curve in the glass along the top of the screen as soon as I took it out of the box and removed the skin/wrapper. It's noticeably bowed out in the middle of that edge.

I just wanted to chime in to say that this is my 2nd C8. The 1st had a June build date and it came with the .22 firmware. I exchanged that one for this 2nd C8 which came with the .26 firmware and a 20120720 build date.
The 1st infinity had power and volume button issues and sharper than normal edges all around. I can't find anything wrong with the build on this second C8 other than the haptic feedback is set really low. (Does vibrate when power on)
I'm rooted and have the dmclient froze in titanium backup while I read up on NV flash. (Guarding against a forced OTA update) I made the mistake of applying the .30 OTA to soon last time.

effezie said:
I just wanted to chime in to say that this is my 2nd C8. The 1st had a June build date and it came with the .22 firmware. I exchanged that one for this 2nd C8 which came with the .26 firmware and a 20120720 build date.
The 1st infinity had power and volume button issues and sharper than normal edges all around. I can't find anything wrong with the build on this second C8 other than the haptic feedback is set really low. (Does vibrate when power on)
I'm rooted and have the dmclient froze in titanium backup while I read up on NV flash. (Guarding against a forced OTA update) I made the mistake of applying the .30 OTA to soon last time.
Click to expand...
Click to collapse
Glad to hear that. Hopefully, 3rd time will be the charm. I really do LOVE this tablet, I just want one that's solidly built and works.

Agreed. I don't see how humidity is going to affect Corning's Gorilla Glass 2. Seriously don't see this being a factor at all.
I suppose I am one of the luck ones as well, no discernable bleeding edge light and completely flat screen. Of course, I bought the 64GB model from BB online, and it already have .26 on it when it arrived.

I too just returned my c8 version today that suffered from light bleed, mushy/sticky power and volume buttons, separating screen which also had sharp 90 edges. The one I just picked up is a night and difference from the first one. This one is a c9 version and other than a little light bleed the construction is solid. It doesn't even appear to be the same tablet....its like the first one was a cheap knock off. Another thing I am noticing with this new one is that the speed of touch feedback is so much faster than the C8.
I did decide to purchase the extended warranty this time around...my experience with the prime has left me jaded and there is no way I'm going to be left holding a dud.
With that said, I suggest if possible to keep on returning them until you find a good one...they do exist!
If Asus can't be persistent with their perfection...Be persistent with the returns!
F me! Just noticed this one is creaking like an old rocking chair, its on the left side by the hdmi port.

Today, I swapped out my first C7 after owning it for a week and received a C8 as a replacement. It amazes me the differences between the two.
For my particular devices, the differences were:
C7 pros: The construction was very solid. I kept reading horror stories about screen lift, creaking, etc. and mine felt solid like a tank. No light bleed issues either.
C7 cons: It suffered from severe I/O issues. Trying to download something from the market would grind things to a halt until the download and install finished. The Browser lagged a bit as well........as did moving around the launcher or clearing items from the recents menu . I returned it because there was a spec of dust under the screen which just really bothered me.
C8 pros: It feels like they put better quality internals in this one! There have been none of the i/o issues, lag, or stutters. Everything is very responsive and snappy. From a software usability standpoint, this feels like a completely new device.
C8 cons: The physical build quality is definitely not as high as the first. There are spots around the edges of the glass that feel "squishy". There is also a bit more lightbeed but i would not call it bad by any means.
For now, I am going to keep the C8 because the performance difference alone is worth it. The minor physical build quality issues aren't bothering me enough yet to risk giving up the performance.
One trend I seem to have noticed after reading all these reviews is that the build date does not seem to have much correlation with physical build quality. However, it does seem that more recent models may be using higher quality internal components contributing to noticeable performance gain.
These are just my observations.