How I got my perfect Infinity - Asus Transformer TF700

Thought I share how I got my "perfect" Infinity.
My first one had a couple of dead pixels smack in the middle of the screen. And it was slow as hell. Every couple of seconds, it would slow down... even after the update. I read online about I/O issues and how the JB update would improve it. But that dead pixels in the middle of the screen was a deal breaker. I returned it and ordered a new one. This one was great. No dead pixels. And much snappier after the update. But I started to notice "clicking" noise when I pressed the edges... I read about how the Gorilla Glass was supposed to have some flex... So I pressed on. But it got worse and worse. I even called Asus and the tech guys said, it was supposed to have some flex and some clicking was normal. But if I felt like the screen was separating, then I should return it. How was I supposed to tell the difference? Only heaven would know. In fact, every other aspect about the tablet was fine. Snappy, no light bleed, no HDMI probelm. audio worked.... But the clicking was like plague... It kept spreading! to the entire top edge! Well, I returned it. Ordered a new one. The third one was good build except it had DIRT under the screen. I was about to accept my fate. I told myself, "it's just some dirt..." But it was on the top left corner where the tabs are on browsers! which meant I kept seeing the dirt every time I looked at the screen. So. I got a new one. My 4th one was perfect. Good build. Absolutely no clicking. Very snappy. The difference between the first three and this in terms of smoothness was night and day... Audio out worked. No light bleeding. No dead pixels. No dirt. and I tested the HDMI out... no picture on my screen. I was like @#$%^@$%^. I got a new cable and it was the cable.
The serial numbers. I do not remember the first one. The last three were all C6 lines but progressively higher numbers.
So if anyone is out there with a less than perfect tablet, it's your money. Keep exchanging it until it make you happy.

Where did you buy this tablet from?

When will people learn.

You would really go through 4 tablets to get a good one - Forget that . . I returned one, and I think I am done. Asus is going to lose money on this model too because of all the returns.

File this under "Cool story, bro."

jrkart99 said:
File this under "Cool story, bro."
Click to expand...
Click to collapse
The OP is a perfect case study of the anal retentive geek squad. All he had to do is look at it the wrong way and he'd return it...

opentoe said:
When will people learn.
Click to expand...
Click to collapse
When idiots stop sh!tposting.
(Read: never)
le rustle face

Related

Dead pixel

What would a dead pixel look like on the inspire. I just got this phone yesterday after returning my 1 st one. There is a black dot in the lower right corner.
Sent from my inspire 4g
Black door? Knock on it. LOL Lets see whats behind door no. 1
EDIT: I see you corrected the typo.
I haven't heard anyone complain about dead pixels. Why not exchange it if you are still within the 30 days.
donharden2002 said:
What would a dead pixel look like on the inspire. I just got this phone yesterday after returning my 1 st one. There is a black dot in the lower right corner.
Sent from my inspire 4g
Click to expand...
Click to collapse
I have a tiny tiny dead pixel in the top of the screen... no big deal, it's so tiny on this model... for $399 for the phone ya really can't expect perfection... it's the cheapest android w\ comparable specs to date, they're cutting costs to keep prices low. Thought about swapping it, but not worth the hassle because in 2 months there will be a next best thing and I know I'll end up buying it, lol
Had a stuck pixel on mine. I returned and promptly had a nice new stuck pixel free device. It was tiny and if I had to live with it, it wasn't that bad, but why live with it? It was distracting from my inspire goodness.
Corriewf said:
Had a stuck pixel on mine. I returned and promptly had a nice new stuck pixel free device. It was tiny and if I had to live with it, it wasn't that bad, but why live with it? It was distracting from my inspire goodness.
Click to expand...
Click to collapse
Yeah, but after having many phones after many years with many dead pixels, half the time the exchanged phone has a same or similarly annoying issue. It's a cheapy phone and I won't have it for too long, so I'm not worried. Funny how the people who make a big deal about a tiny dead pixel on the phone are the same people who get a big scratch on their car and never fix it, haha
Follow up...
Hmm, I just looked for the dead pixel and it's gone.. I took the screen protector off this morning, it must have just been dust under the screen protector... mehh.
I liked having a screen protector but the screen looks sooooo much nicer and is so much more touch responsive without it. This is the first phone I've ever put one on, and I will never use one again. I went with 3 brands and all 3 sucked.
Meh, I used to have an iPhone4 that wouldn't scratch no matter what you did to it. Put it with keys in your pocket, not a damn scratch.
I thought I'd have the same experience with the Inspire but no. I actually babied the phone, put it in its own pocket etc. but still ended up with a half inch light scratch where the capacitive buttons are. Good thing I can't see it unless I hold the phone at a certain angle or it would bug me forever. I promptly threw a protector on it, I strongly recommend them.
egyan said:
Meh, I used to have an iPhone4 that wouldn't scratch no matter what you did to it. Put it with keys in your pocket, not a damn scratch.
I thought I'd have the same experience with the Inspire but no. I actually babied the phone, put it in its own pocket etc. but still ended up with a half inch light scratch where the capacitive buttons are. Good thing I can't see it unless I hold the phone at a certain angle or it would bug me forever. I promptly threw a protector on it, I strongly recommend them.
Click to expand...
Click to collapse
yeah, if you're not careful anything will scratch. if you don't want to stain your couch you can cover it in plastic, but then you have to lose some experience of sitting on a couch.
bella92108 said:
Yeah, but after having many phones after many years with many dead pixels, half the time the exchanged phone has a same or similarly annoying issue. It's a cheapy phone and I won't have it for too long, so I'm not worried. Funny how the people who make a big deal about a tiny dead pixel on the phone are the same people who get a big scratch on their car and never fix it, haha
Click to expand...
Click to collapse
Im just as anal about my cars. Can't stand even seeing dirt on them. My wife on the other hand could care less. Her car gets dented all the time in the Pittsburgh parking garages and she could care less. Its only a car she says. I won't mention the price but its a very nice nissan armada, well was very nice when we bought it.
Sent from my Desire HD using XDA Premium App
kirk123 said:
Black door? Knock on it. LOL Lets see whats behind door no. 1
EDIT: I see you corrected the typo.
I haven't heard anyone complain about dead pixels. Why not exchange it if you are still within the 30 days.
Click to expand...
Click to collapse
Damned spell check got me and i wasnt paying attention.
Sent from my Desire HD using XDA Premium App
bella92108 said:
Yeah, but after having many phones after many years with many dead pixels, half the time the exchanged phone has a same or similarly annoying issue. It's a cheapy phone and I won't have it for too long, so I'm not worried. Funny how the people who make a big deal about a tiny dead pixel on the phone are the same people who get a big scratch on their car and never fix it, haha
Click to expand...
Click to collapse
Do you know me or something? I swear I'm gonna get that scratched fixed soon! Lol!
Dead pixels have always bothered me on handheld devices. But I have really good vision. I can see pixels on an iPhone 4 screen. I see the dots on the inspire screen everyday, but they don't bother me much. The phone is too awesome! To me it's not a cheap phone. I may use it for another year or so.
Generally, a dead pixel is always a black dot, whereas a stuck pixel could be any color. I had two dead pixels on an old Captivate, AT&T exchanged it no problem.

Am I unlucky with screen bleed?

I've went through about 5 different phones and they all have the same screen bleed. Tried multiple stores in case they were from the same batch. Am I just unlucky? Or do all G2X have screen bleeds and the ones that report they don't really arent as picky as I am?
Your picky.
Sent from my LG-P999 using XDA Premium App
the mythical perfect screen you hunt doesn't exist
you're clearly being too picky. my screen has a bit of bleed, but i'll be keeping it because i'm never watching a solid black screen, at full brightness, in a dark room. so it doesnt really matter that much to me.
You're not unlucky, and you're not too picky. I just returned my 3rd g2x today because of backlight bleeding. All 3 were so bad that the bleeds were reaching into the center of the screen. Despite what people say about 'You can't see it unless you're in the dark' is not completely true. The last 2 phones had a stripe of brown across the bottom that was blurring out text at the lower half the screen when on a white background. The 3rd was outright yellow.
Upon returning my 3rd, the manager at the store pulled about the remaining 5 they had in stock. She went in the back and checked all 5 in the dark, and all of them had screen bleeding worst than the one I was returing. The manager agreed that it was unacceptable and sent all 5 back. She's calling me when the next shipment comes in, and she's going to personally go through every phone until she finds one that works right.
As for being too picky, that's bull. These guys on the forums will tell you you're being overboard, but the phone is $500 or $199 and a 2 year contract. I know some people have cash to throw around, and the value of the dollar means nothing. But for me, $200 is a lot of money, 2 years of my life is a lot of time, and for me to just accept something that isn't built right because i'm being "too picky" is a load of crap.
If this was a $5000 tv I bet you'd be singing a different tune, but since it's a $500 phone I should just suck it up. Screw that, i'll return 80 of them if I have to. Hopefully someone at corporate will get the hint and call LG about it.
The manager told me that LG already notified all the T-Mobile reps to make them aware of it. So it's not just a matter of pickiness, this a clear cut QA issue on LG's end.
Backlight bleeding is common. It's common because of poor production, and absolutely no QA in Korea. They're shipping these phones out before the glue finishes drying, and thus we're left with crap. I read another post on here that a guy had glue around the edges of the screen. LG needs to get it together, this is out of hand.
The phone is sexy though, and I suggest returning it until you get the one that works right. I've considered giving up and waiting for another, but all the other phones coming up have custom roms and locked bootloaders. I'm uninterested.
konga056 said:
I've went through about 5 different phones and they all have the same screen bleed. Tried multiple stores in case they were from the same batch. Am I just unlucky? Or do all G2X have screen bleeds and the ones that report they don't really arent as picky as I am?
Click to expand...
Click to collapse
I saw a post a few days ago of someone who went to replace their phone in the store. They tested the new one in the store and were satisfied, but then got home and locked themselves in a closet or something and saw some bleed and they were upset.
If you're like this person, then ya, you're way too picky. This is an LCD screen, not LED.
MWBehr said:
If you're like this person, then ya, you're way too picky. This is an LCD screen, not LED.
Click to expand...
Click to collapse
LG Electronics also makes the iPhone 4 LCD. And it doesn't have this issue.
I don't understand why anyone would accept what is for certain a quality issue. Do you really just not care that much? I have had many phones over the years and none of them have had these issues. I even pulled all of them back out (yes I have kept them all) and checked them under the exact same conditions as the g2x I sent back yesterday. Do you know how many of them had screen bleed? ZERO none of them. I'm not talking about standard extra defused light coming through an LCD. I'm talking about multiple spots were light was coming through because it simply wasn't sealed correctly.
To the people saying you are being too picky or it doesn't matter or they are all like that either don't know what they are talking about, saying that because they don't like you, or just like to be screwed out of their money.
Have a little pride and demand that it is right. I will sent back every single phone I get until I get one that is correctly built.
i paid 500 for mine but i just don't wanna go there get another one and have it be worse than mine and then make it an issue for me to keep going back till i get a good one since the one i have has been straight aside from the minor backlight issue which i can't see unless im in the dark on that black screen
I have to say that my first phone had it bad. I could tell in every app I tried. I saw it before there were threads like these. I returned it.
I did however buy one from the store and went into the neighboring store's bathroom with the light off, total darkness and the screen looked good.
Obviously these are the first batch and may not be perfect but I'd like to think "most" are under normal conditions. I know I wouldn't stand for it. The screen is something you always will use. It would bother me.
If your store doesn't have a good one, then don't buy it. I guess it is save to say there are batches of bad phones out there. The demo unit at the store near me looked great compared to the SGS4G sitting next to it and there were no bleeding. My unit was clean too.
I'd recommend wearing a hoodie and checking before you leave.
strung said:
LG Electronics also makes the iPhone 4 LCD. And it doesn't have this issue.
Click to expand...
Click to collapse
Google is your friend: http://forums.macrumors.com/showthread.php?t=1141752
Anymore random LCD phone names you want to throw out that you think doesn't bleed?
Look, I'm not saying that there isn't an issue, because I've seen several picks of completely unacceptable bleed. I'm simply saying don't expect to have absolutely no bleed.
MWBehr said:
Google is your friend: http://forums.macrumors.com/showthread.php?t=1141752
Anymore random LCD phone names you want to throw out that you think doesn't bleed?
Look, I'm not saying that there isn't an issue, because I've seen several picks of completely unacceptable bleed. I'm simply saying don't expect to have absolutely no bleed.
Click to expand...
Click to collapse
Yea my neighbor has an iPhone 4 and I can see some. Nothing major and he probably doesn't even notice it. I think every LCD phone I had, had some bleeding... hence why I love my Nexus One Amoled... but it had its problems too.
I'd rather have a small bleed then no multitouch or a locked bootloader
out of 5 g2x I've seen, all of them had similar bleeds (similar bleed size, similar pattern at each corner), with 1 of them being the worst. All 5 of them are pretty much the same.
with that being said, I think you should really just settle with one. NOT because I am saying you are picky, but that statistically the chance of getting one with minimal bleed is very, very, very low.
I truly have no idea how some people on this forum are getting g2x's with almost no bleed. If you ask me, it's either we have different judgment, or they just don't test their devices in a totally dark room with >50% phone brightness.
c19932 said:
out of 5 g2x I've seen, all of them had similar bleeds (similar bleed size, similar pattern at each corner), with 1 of them being the worst. All 5 of them are pretty much the same.
with that being said, I think you should really just settle with one. NOT because I am saying you are picky, but that statistically the chance of getting one with minimal bleed is very, very, very low.
I truly have no idea how some people on this forum are getting g2x's with almost no bleed. If you ask me, it's either we have different judgment, or they just don't test their devices in a totally dark room with >50% phone brightness.
Click to expand...
Click to collapse
....or different batches throughout the country/world?
MWBehr said:
Google is your friend: http://forums.macrumors.com/showthread.php?t=1141752
Anymore random LCD phone names you want to throw out that you think doesn't bleed?
Look, I'm not saying that there isn't an issue, because I've seen several picks of completely unacceptable bleed. I'm simply saying don't expect to have absolutely no bleed.
Click to expand...
Click to collapse
So what is your point? The light bleed existed on the initial batch of iPhone 4's, people complained, and the manufacturing process was fixed. If people don't complain then it won't get fixed. If LG can fix it for the iphone, they can fix it for this phone.
i had to go into my dark room and set my screen to 100% to see any bleed...but how often will you keep your screen at full brightness in complete dark? when it's dark i dim my screen, the bleed is nearly impossible to see in typical conditions.
Each of the phones I had i didnt look at them in a completely dark room. But just looking at the screen under normal office light at 50% display and they were all quite noticable. I dont think I'm being too unreasonable but maybe I am.
I think i'll just suck it up and live with it. I honestly wouldnt mind it if the bleeding is in the top two corners where its generally the white status bar but its pretty noticeable in the bottm two. I'll probably just end up waiting until HTC Sensation comes out and sell this.
strung said:
So what is your point? The light bleed existed on the initial batch of iPhone 4's, people complained, and the manufacturing process was fixed. If people don't complain then it won't get fixed. If LG can fix it for the iphone, they can fix it for this phone.
Click to expand...
Click to collapse
Nice try again. Apparently you paid no attention to the date of the posts on that thread. The initial post was 4 days ago (3 when I initially made mention of it).
Of course, I must also point out that your initial claim was that iphone4s "do not have this problem". They definitely have had this "problem" and sill do.
Just give up or admit you're wrong. Quit clinging to this completely inaccurate claim.
MWBehr said:
The initial post was 4 days ago (3 when I initially made mention of it).
Click to expand...
Click to collapse
Honestly I didn't notice that. I stand corrected!
I'm sorry to ask such a tyro question. What is screen bleed? What does it look like?

How many times have you exchanged your Infinity?

Topic.
1: Volume rocker did not work properly.
2: Many scratches on the backplate.
3: loose screen causing clicking noise.
Twice.
#1 - Wifi died after a week.
#2 - Screen was completely detached on one side out of the box.
Almost returned my third since it looked like the spring was missing from my SD card slot (that is, the card went in with no resistance and wouldn't push in to pop out)... but on a whim I decided to try it again right before I finished boxing it back up and it started working.
Its a great tablet, but Asus really needs to improve their quality control.
ZROW
Returned mine no times...
Thought about it-didn't do it.
0 cakes out of infinity
did not return my tablet, was flawless unit
Did the Infinity even come with plastic covers for the keyboard dock connections and the charging port like the TF201 model? The Infinity I saw, brand new right out of the box there were no plastic protective covers at all.
opentoe said:
Did the Infinity even come with plastic covers for the keyboard dock connections and the charging port like the TF201 model? The Infinity I saw, brand new right out of the box there were no plastic protective covers at all.
Click to expand...
Click to collapse
All three of mine had the cover on the dock connector itself, but not the two slots where it connected to the dock.
Edit: Sigh... Now I"m considering returning mine for the third time. When I got it, I noticed the screen could be pushed in a little along the bottom, like it wasnt completely attached but I figured it'd be ok since it was just one spot. Now its doing it along the top. My local best buy has them in-store now so I could exchange it no problems, but I've been holding off during my return period before unlocking and I dont want to push that back again...
I heard you can get banned for 90 days from Best Buy if you return too much... They scan your driver's license to keep a log of your returns. Not sure if it applies to defective tablets but they will probably assume that you're doing the damage one day. Anyways, time to exchange it.
Zero. Slight clicking sound. GPS is a bit slow. Nothing else.
4: Loose screen, clicking noise
5: Loose screen, clicking noise
6: Loose screen, clicking noise
7: 5 pieces of dust under screen.
This is outrageous.
Vibrating Motor didn't work at all.
This one is perfect. Everything works great. No creeking of the screen, no light bleed no problems what so ever. For now.
4 times....... 1- had dust under screen, 2- dead pixels, 3-dust under screen 4-dead pixels again, and the one I currently have seems like a keeper, I am used to it already as I had to do the same for the Prime and tf300 at least twice, but once I got a good one it held up good, Im very satisfied with the one I currently have. the infinity is clearly a beast!
8: dusts under screen
Finally got a good one on my ninth... everything is good except for the minor lightbleed but IDC I have found THE ONE!
ImYoungxD said:
8: dusts under screen
Finally got a good one on my ninth... everything is good except for the minor lightbleed but IDC I have found THE ONE!
Click to expand...
Click to collapse
I highly doubt you can go through 9 units in 2 days. Are you near a real store?
le rustle face
Keion said:
I highly doubt you can go through 9 units in 2 days. Are you near a real store?
le rustle face
Click to expand...
Click to collapse
I live between two BB stores that are under 3 miles away.
I work in the city where two BB stores are less than 1 mile away so I can walk.
I also open the box in the store after exchanging and check for problems. If I do, I exchange it again. Started this after my fourth exchange cause I was getting annoyed driving back and forth.
wow. I feel lucky. I got mine first week available in North America and have NO issues. no dust, no light bleed. Been working great. No complaints, except with Chome being a big laggy.
Zero.
Original TF101 - 7 TIMES. Yup..dead pixels, blemishes on screen, dead WIFI, crappy QA until I got a good one.
TF201 - Twice. Dead pixels, dead GPS. End of romance.
TF700 - Returned once. Original one had cosmetic imperfections (large dark stain/spot on the side), loose screen and clicking on left side of screen. Picked up another one, PERFECTION. No dead pixels, no clicking, no cosmetic damage.
Zero. No problems in 3 weeks.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
wow
Really This is shocking to hear. I bought mine online from america, because I couldnt buy the cheaper speced version here. But mine is perfect thank god. I do actually have a very slight clicky sound in one of the corners. But I'll live with that. I don't really know what I could do if this craps out on me.
Asus really need to work on their QC...
No returns on my infinity yet, I have had mine for almost 30 days (have 60days for BB returns). Have a 2yr ADH from square trade just incase. Looks like this infinity is a keeper.
My primes on the other hand was just a QC problems after QC problems... very dissapointed with the prime.

build quality issues still present

I purchased my first tf700 from Newegg 5 or 6 weeks ago. The build was excellent. No screen separation issues and little light bleed. I ended up RMAing the device due to a weird screen issue where it was randomly tapping/swiping by itself every now and then.
I just received my new device which has an 80 serial number, and the screen is separating. If you sight down the edge of the top you can see that it actually bows out quite a bit toward the middle, and it clicks when I press it. SO FRUSTRATING!
Newegg's RMA procedure is as painless as it can be for an online purchase, but I think I'll return this one for a refund and purchase from Best Buy so I don't have to spend the foreseeable future shipping Infinities back and forth.
yeah
esoxx said:
I purchased my first tf700 from Newegg 5 or 6 weeks ago. The build was excellent. No screen separation issues and little light bleed. I ended up RMAing the device due to a weird screen issue where it was randomly tapping/swiping by itself every now and then.
I just received my new device which has an 80 serial number, and the screen is separating. If you sight down the edge of the top you can see that it actually bows out quite a bit toward the middle, and it clicks when I press it. SO FRUSTRATING!
Newegg's RMA procedure is as painless as it can be for an online purchase, but I think I'll return this one for a refund and purchase from Best Buy so I don't have to spend the foreseeable future shipping Infinities back and forth.
Click to expand...
Click to collapse
I bought one off amazon everything was great, then the corner of the screen start to click when I picked it up. :/ it was so perfect..............................................................................
Guys, there are like a thousand threads on these same issues already here, each with perfect solutions for dealing with the situation should it arise. Must we have yet another negative TF700 thread? My 700 is perfect, and so are the majority of people's as well. Continuing to populate the forums with these types of threads though does nothing but scare away potential developers from wanting to shell out the cash to pick up one of these tabs and develop awesome roms for us!
I do not mean to sound rude, nor am I flaming, but please, mods lock this thread before it spirals into something worse.
I agree with theanarchist that this is the same thread that we've all seen. But I also don't think most peoples tabs Are perfect. Some (like me) are still trying to find a perfect one And some have just accepted what they have and have given up. Others (like you) managed to get a perfect one.
Sent from my Galaxy Nexus using xda app-developers app
Mine is perfect as well. My mother, my uncle, my best friend Craig, and my in laws have a perfect unit too. So when I see threads like this, it makes me wonder if people have an agenda.
xRevilatioNx said:
Mine is perfect as well. My mother, my uncle, my best friend Craig, and my in laws have a perfect unit too. So when I see threads like this, it makes me wonder if people have an agenda.
Click to expand...
Click to collapse
Mine's not perfect, clicking near the hdmi port and you can click it from a good portion up towards the middle of the screen. I personally gave up on Asus, though hearing that there are people that have indeed perfect ones makes me wish I had exchanged it. I was hesitant because I had already returned a tf300 (screen issue) and then later the Prime that I had replaced the tf300 with. I had only returned the Prime to get the tf700, as I was pretty frustrated I couldn't get the gps to work EVEN with the dongle Asus sent me. I didn't have any wifi issues really nor any screen clicking issues with the Prime and though I like the infinity the screen clicking annoys me. Wondering if I should rma it directly to them, just don't want to get a different tab back or been in a worse situation as a result.
TheAnarchist1 said:
Guys, there are like a thousand threads on these same issues already here, each with perfect solutions for dealing with the situation should it arise. Must we have yet another negative TF700 thread? My 700 is perfect, and so are the majority of people's as well. Continuing to populate the forums with these types of threads though does nothing but scare away potential developers from wanting to shell out the cash to pick up one of these tabs and develop awesome roms for us!
I do not mean to sound rude, nor am I flaming, but please, mods lock this thread before it spirals into something worse.
Click to expand...
Click to collapse
There was an earlier thread that theorized that the build issues were being addressed in the more recently built devices. I posted to show that even with the more recent 80 serial number devices, the same issues are present on at least a percentage of tf700s.
I certainly have no agenda. I'm on my second Infinity, which will unfortunately also be going back. The first one had some extreme screen separation on the right hand side. It was an C06 serial number. The one I'm on now, my second is a C80 serial number. The screen is good, with just a slight clicking in one spot on the right hand side. I'd live with it. However the light leaking out onto the screen along the bottom and right side from the LEDs is very very noticible.
I won't give up. I really love everything about the TF700 except for the build quality issues that I have experienced. I think the OP has a valid point in saying that the issues are not fixed yet. When my second unit came, I was psyched to see the serial number on the box said C80. I was very disappointed that it too has issues.
I think...
I think the screen seperation can be because of the humidity. Where do u live?
killerdan56 said:
I think the screen seperation can be because of the humidity. Where do u live?
Click to expand...
Click to collapse
I don't think it's humidity. I live on the west coast of the US. Pretty dry here. I noticed a curve in the glass along the top of the screen as soon as I took it out of the box and removed the skin/wrapper. It's noticeably bowed out in the middle of that edge.
I just wanted to chime in to say that this is my 2nd C8. The 1st had a June build date and it came with the .22 firmware. I exchanged that one for this 2nd C8 which came with the .26 firmware and a 20120720 build date.
The 1st infinity had power and volume button issues and sharper than normal edges all around. I can't find anything wrong with the build on this second C8 other than the haptic feedback is set really low. (Does vibrate when power on)
I'm rooted and have the dmclient froze in titanium backup while I read up on NV flash. (Guarding against a forced OTA update) I made the mistake of applying the .30 OTA to soon last time.
effezie said:
I just wanted to chime in to say that this is my 2nd C8. The 1st had a June build date and it came with the .22 firmware. I exchanged that one for this 2nd C8 which came with the .26 firmware and a 20120720 build date.
The 1st infinity had power and volume button issues and sharper than normal edges all around. I can't find anything wrong with the build on this second C8 other than the haptic feedback is set really low. (Does vibrate when power on)
I'm rooted and have the dmclient froze in titanium backup while I read up on NV flash. (Guarding against a forced OTA update) I made the mistake of applying the .30 OTA to soon last time.
Click to expand...
Click to collapse
Glad to hear that. Hopefully, 3rd time will be the charm. I really do LOVE this tablet, I just want one that's solidly built and works.
Agreed. I don't see how humidity is going to affect Corning's Gorilla Glass 2. Seriously don't see this being a factor at all.
I suppose I am one of the luck ones as well, no discernable bleeding edge light and completely flat screen. Of course, I bought the 64GB model from BB online, and it already have .26 on it when it arrived.
I too just returned my c8 version today that suffered from light bleed, mushy/sticky power and volume buttons, separating screen which also had sharp 90 edges. The one I just picked up is a night and difference from the first one. This one is a c9 version and other than a little light bleed the construction is solid. It doesn't even appear to be the same tablet....its like the first one was a cheap knock off. Another thing I am noticing with this new one is that the speed of touch feedback is so much faster than the C8.
I did decide to purchase the extended warranty this time around...my experience with the prime has left me jaded and there is no way I'm going to be left holding a dud.
With that said, I suggest if possible to keep on returning them until you find a good one...they do exist!
If Asus can't be persistent with their perfection...Be persistent with the returns!
F me! Just noticed this one is creaking like an old rocking chair, its on the left side by the hdmi port.
Today, I swapped out my first C7 after owning it for a week and received a C8 as a replacement. It amazes me the differences between the two.
For my particular devices, the differences were:
C7 pros: The construction was very solid. I kept reading horror stories about screen lift, creaking, etc. and mine felt solid like a tank. No light bleed issues either.
C7 cons: It suffered from severe I/O issues. Trying to download something from the market would grind things to a halt until the download and install finished. The Browser lagged a bit as well........as did moving around the launcher or clearing items from the recents menu . I returned it because there was a spec of dust under the screen which just really bothered me.
C8 pros: It feels like they put better quality internals in this one! There have been none of the i/o issues, lag, or stutters. Everything is very responsive and snappy. From a software usability standpoint, this feels like a completely new device.
C8 cons: The physical build quality is definitely not as high as the first. There are spots around the edges of the glass that feel "squishy". There is also a bit more lightbeed but i would not call it bad by any means.
For now, I am going to keep the C8 because the performance difference alone is worth it. The minor physical build quality issues aren't bothering me enough yet to risk giving up the performance.
One trend I seem to have noticed after reading all these reviews is that the build date does not seem to have much correlation with physical build quality. However, it does seem that more recent models may be using higher quality internal components contributing to noticeable performance gain.
These are just my observations.

That light bleed along the lower edge...

After trying and failing with the S8/S8+ I decided to go for the U11.
I ordered two phones from Amazon, one for myself and one for family. They were the amazing silver. We powered them on, and then noticed backlight bleed along the lower edge. The guy on this review is the only reviewer who mentions it and shows the problem:
http://www.androidpolice.com/2017/0...pretty-good-phone-if-anyones-still-listening/
Not only that, but both phones had a dead pixel on the screen (But I think that's just my bad luck . I took it on myself to watch reviews on youtube, and I think the lower edge problem has been there on every review unit, but no reviewer mentioned it.
I really am considering a switch to the U11, but I have a serious screen OCD so I wanted to put it to you guys... Do you all experience this? And is it terribly bad on every day performance?
Thanks
evak2979 said:
After trying and failing with the S8/S8+ I decided to go for the U11.
I ordered two phones from Amazon, one for myself and one for family. They were the amazing silver. We powered them on, and then noticed backlight bleed along the lower edge. The guy on this review is the only reviewer who mentions it and shows the problem:
http://www.androidpolice.com/2017/0...pretty-good-phone-if-anyones-still-listening/
Not only that, but both phones had a dead pixel on the screen (But I think that's just my bad luck . I took it on myself to watch reviews on youtube, and I think the lower edge problem has been there on every review unit, but no reviewer mentioned it.
I really am considering a switch to the U11, but I have a serious screen OCD so I wanted to put it to you guys... Do you all experience this? And is it terribly bad on every day performance?
Thanks
Click to expand...
Click to collapse
I don't have it at all that I can see. Sorry for your luck but my device is flawless.
EtherealRemnant said:
I don't have it at all that I can see. Sorry for your luck but my device is flawless.
Click to expand...
Click to collapse
Thanks for the quick response. Check this thread:
https://forum.xda-developers.com/u11/help/minor-issues-stuck-pixel-sound-static-t3621512
A guy posted a picture as a response. See the shadow along the bottom edge? If you don't have that, at all, this gives me hope. What color is your device if you don't mind me asking.
evak2979 said:
Thanks for the quick response. Check this thread:
https://forum.xda-developers.com/u11/help/minor-issues-stuck-pixel-sound-static-t3621512
A guy posted a picture as a response. See the shadow along the bottom edge? If you don't have that, at all, this gives me hope. What color is your device if you don't mind me asking.
Click to expand...
Click to collapse
No shadow, no dead pixels (just went through a full pixel test - jeez this backlight will blind you on full!), no scuffed glass, nothing. It's the first device I've ever gotten from HTC with no complaints about the screen (my M7 had a yellow tint as did the M8 and the first few weeks of owning my 10, the glue hadn't settled so it was pink tinted and I had to have the Sprint store open up 8 EVOs before I found an acceptable screen to give you an idea - never had a dead pixel except on AMOLED ironically enough).
It's the Sapphire Blue.
EtherealRemnant said:
No shadow, no dead pixels (just went through a full pixel test - jeez this backlight will blind you on full!), no scuffed glass, nothing. It's the first device I've ever gotten from HTC with no complaints about the screen (my M7 had a yellow tint as did the M8 and the first few weeks of owning my 10, the glue hadn't settled so it was pink tinted and I had to have the Sprint store open up 8 EVOs before I found an acceptable screen to give you an idea - never had a dead pixel except on AMOLED ironically enough).
It's the Sapphire Blue.
Click to expand...
Click to collapse
Thanks mate I do love the phone, and am considering another go. My guess is you are -very- lucky, most of the units I've seen myself on youtube (if not all), have it to a certain extend. Treasure and keep it !
evak2979 said:
Thanks mate I do love the phone, and am considering another go. My guess is you are -very- lucky, most of the units I've seen myself on youtube (if not all), have it to a certain extend. Treasure and keep it !
Click to expand...
Click to collapse
Yeah out of all phones I've ever ordered, this one is by far my favorite. Ridiculous battery life, no lag, great screen, no gimmicks (edge sense is actually quite useful - I use it to launch my camera immediately when I'm out and about), excellent camera, doesn't overheat, crystal clear call quality, loud speaker set up... Only thing I don't like is News Republic chewing up my battery and not being able to disable it.
I haven't even rooted it yet. Every other phone I've rooted within a week, oftentimes the day I've received it. I ordered it May 16th from HTC on pre-order and got it on June 9th. No phone has ever been in my possession that long without being modded somehow, even if it was just changing the launcher.
The light bleed problem affected every review unit as you said, and there have been several threads here mentioning it. My conclusion is that nearly every U11 has the problem although it's rather subtle so not easy not to notice if you don't know about it.
Personally I'm rather OCD about screens and I'm not happy about this defect but I'm now used to it. The location is just one that you don't look at normally. In fact I think we've grown used to ignore the lowest part of the screen as it's where ads normally sit. Also it kinda helps that the bleed gets reduced a lot depending on the angle you look at the screen from.
x_d_n said:
The light bleed problem affected every review unit as you said, and there have been several threads here mentioning it. My conclusion is that nearly every U11 has the problem although it's rather subtle so not easy not to notice if you don't know about it.
Personally I'm rather OCD about screens and I'm not happy about this defect but I'm now used to it. The location is just one that you don't look at normally. In fact I think we've grown used to ignore the lowest part of the screen as it's where ads normally sit. Also it kinda helps that the bleed gets reduced a lot depending on the angle you look at the screen from.
Click to expand...
Click to collapse
Thanks. I am considering getting a device regardless. I will ponder it over the weekend - and if you are OCD and can live with it, so must I. If you can help with advice on how to deal with such impulses (over screens), do drop me a message. I am desperately trying to drop that habit off.
evak2979 said:
Thanks. I am considering getting a device regardless. I will ponder it over the weekend - and if you are OCD and can live with it, so must I. If you can help with advice on how to deal with such impulses (over screens), do drop me a message. I am desperately trying to drop that habit off.
Click to expand...
Click to collapse
I'm very OCD regarding LCD screen and the phone itself. The phone is perfect except for the light bleeding, a stuck pixel and some sound static in earphone. Otherwise the phone is perfect like the camera, sound, battery life and performance.
As I bought the phone from Hong Kong its a pain in the... To return it. So with a 10% discount off that seller gave me I learned to enjoy and love the phone.
My HTC One X, M8x, 10 U11 and the S8+ all suffered from flaws being the S8+ the worst (random restarting and pinkish screen tone) so I'm not a lucky person about phones.
@evak2979 i sent you a message but basically it's about accepting defeat when it comes to small flaws, unfortunately there's not more to it. Although of course, if your phone has serious build issues that no one else has it should go back to HTC.
I have is as well. Actually this is my second unit (Black), the previous (Silver) had it as well. I can see it in display test application but I would say it is not affecting normal usage. Overall I am happy with display quality.
KejPi said:
I have is as well. Actually this is my second unit (Black), the previous (Silver) had it as well. I can see it in display test application but I would say it is not affecting normal usage. Overall I am happy with display quality.
Click to expand...
Click to collapse
Like I told my new pal on PM, I got the S8+ new for a very good price (539, UK).
If that sinks, I'll bite the bullet and return to HTC. It's funny because I don't mind scuffs, or scratches, or what. I just want a normal okay screen. I remember being happy with Note 4, with S5, With M8, With M9.
Then this new fashion started with every display being the dumbs
And the S8+ arrived with dust under the glass.
I've fought for a long time with my OCD to accept that AMOLEDs will never have consistent whites (though my one plus 3t is perfect, the one phone I've kept over the months). As of late with the S8 it's also been, full red edges, dead pixels, dust specs.
Let's try the U11 again. If it just has light bleed and no dead pixels I'll keep it...
I don't have light bleed.
I use edge to launch my calendar.
Sound through the earphones is shockingly good!
It looks dated in any other color but blue or red.
Those bezels? Ug.
The screen is beautiful and they've coated with oleophilics that feel INCREDIBLE.
The camera is excellent.
It's a very VERY good phone.
I have it on mine, but It's hardly even noticeable... Definitely not a game-changer for me. It's not enough for me to return it for a new one.
Just updating that I received my HTC U11 black, and I sent it back with a dead pixel. That's the third U11 with dead pixels, the first two having been silvers from Amazon.
I have also encountered issues with S8s (dust under glass), but not so much or frequent.
I want to get a U11 more than I do an S8, but I am really really skeptical about a few things - the build quality of the panel. The reports that some of the units are not so water proof (The solar reds apparently, a youtube search I did testified to that.
Sorry for diverting this thread from its original post, but I am really curious about you guys' opinion. I agree to having screen OCD, and that I should lower my standards when it comes to white consistency on AMOLED, for example. Or even some light bleed on LCD panels.
But dead pixels? Dead pixels on 649 pound devices, top end flagship? What is going on with QC and how lost must we drop our standards.
And if anyone thinks I am lying I am happy to provide with pictures...
If anyone from the UK has a relatively faultless HTC, please tell me where you bought it from so I can buy from there myself. And which color variant.
Thank you.
Hi, I believe you as I have the same problem with my Asian version. But can you share a picture? I want to compare mine with yours.
evak2979 said:
Thanks. I am considering getting a device regardless. I will ponder it over the weekend - and if you are OCD and can live with it, so must I. If you can help with advice on how to deal with such impulses (over screens), do drop me a message. I am desperately trying to drop that habit off.
Click to expand...
Click to collapse
evak2979 said:
Just updating that I received my HTC U11 black, and I sent it back with a dead pixel. That's the third U11 with dead pixels, the first two having been silvers from Amazon.
I have also encountered issues with S8s (dust under glass), but not so much or frequent.
I want to get a U11 more than I do an S8, but I am really really skeptical about a few things - the build quality of the panel. The reports that some of the units are not so water proof (The solar reds apparently, a youtube search I did testified to that.
Sorry for diverting this thread from its original post, but I am really curious about you guys' opinion. I agree to having screen OCD, and that I should lower my standards when it comes to white consistency on AMOLED, for example. Or even some light bleed on LCD panels.
But dead pixels? Dead pixels on 649 pound devices, top end flagship? What is going on with QC and how lost must we drop our standards.
And if anyone thinks I am lying I am happy to provide with pictures...
If anyone from the UK has a relatively faultless HTC, please tell me where you bought it from so I can buy from there myself. And which color variant.
Thank you.
Click to expand...
Click to collapse
Jadraker said:
Hi, I believe you as I have the same problem with my Asian version. But can you share a picture? I want to compare mine with yours.
Click to expand...
Click to collapse
Of course...Here. Same on all three, just in different positions.
Mine is in a similar position but it's not black. Indeed it changes according to the color but of course it's different from the rest. Mine is more a defective pixel than a dead or stuck one. I thought it was the same pixel issue but it's not.
evak2979 said:
Of course...Here. Same on all three, just in different positions.
Click to expand...
Click to collapse
Jadraker said:
Mine is in a similar position but it's not black. Indeed it changes according to the color but of course it's different from the rest. Mine is more a defective pixel than a dead or stuck one. I thought it was the same pixel issue but it's not.
Click to expand...
Click to collapse
Nah mine is dead dead.
I am considering a 4th U11. At this point, I don't even care about the light bleed. But 3/3 with dead pixels, it can't just be bad luck. That's the thing. I mean this is very bad QC. None of the reviewers are mentioning things like this. Or the issues with the S8 screen.
I think at this point someone needs to step up and say : ok guys, these are the GOOD things about the phone. But there is also
S8 (red tints, even after patch. Bad smudges on grey. Dust particles under panel)
U11 (Dead pixels. Light bleed at bottom of the screen).
In the end, the only trustworthy review is XDA forums and its users.

Categories

Resources