Database Info

The corner of the button part is coming off

i just noticed the corner near the home button has a tiny bend that starts seperated from the layer beneath it....it looks like an old screen protector got a little bend in the corner but that is the surface of the phone!!! is there anyway to replace it or i cant do anything just waiting for it to come off?
it is ridiculous how an expensive phone like touch pro uses such low quality plastic that can actually get bend and i feel really helpless now =(

Yeah, mine is doing that too. Except it's on the "back" button side. It doesn't really affect anything. I'm just worried that if something gets caught on it, it might peel back further.
Nothing can make this phone suck though! It rules!!!

Yeah, unfortunately the TP/Diamond are suffering from some manufacturing defects, probably because it's a "new" design style for HTC. My TP has a touchscreen defect that conveniently showed up after the two-week return/exchange period.
Protective case, learn to love it.

Do you guys think they would be willing to replace a new case if i pay them?

My device shows the same behavior since this morning. Its about 1mm, so nothing to worry about and it seems to stick pretty well on the rest, thinking about rasping the edge off a bit to make it smoother
Is this getting worse on yours? Last post is 3 weeks ago .......

Any chance someone would post a picture of this? I'm thinking about the Fuze, but I can't stomach another HTC phone full of hardware flaws.
season007 said:
Do you guys think they would be willing to replace a new case if i pay them?
Click to expand...
Click to collapse
If it's really a defect, they should replace it without you paying them.

Considering that ATT offers a 1 year manufacture warranty. I can't see why you wouldn't be able to return the phone and get a replacement. It is obviously a problem with the design of the phone.
It wouldn't hurt to try and go to an ATT store and see if you can get a new FUZE!!!

Well, as we all know, HTC always claims that they don't know anything about the problems we address to them.
When I first complained to their support that I am having GPS lag, they told me I was the only one in the whole world suffering that problem, so it must be related to the software I installed.
Luckily they can not deny hardware problem so easily, as long as it is clear that there wher enot caused by misuse.
I don't have this particular problam, yet, but as I am already on my thrid TP (the first two had a defect hardware keyboard and black paint falling off), I would like to get some photo evidence of the users here, who unfortunately have the button part coming off.
That way we can show to HTC that more users have that problem, before we send back our devices, and maybe negotiate a direct replace, instead of rapair procedure, which takes up to 2 weeks.

season007 said:
i just noticed the corner near the home button has a tiny bend that starts seperated from the layer beneath it....it looks like an old screen protector got a little bend in the corner but that is the surface of the phone!!! is there anyway to replace it or i cant do anything just waiting for it to come off?
it is ridiculous how an expensive phone like touch pro uses such low quality plastic that can actually get bend and i feel really helpless now =(
Click to expand...
Click to collapse
My AT&T Fuze started doing the same thing after just two months. However, the bent plastic corner of the clear laminate was RAZOR sharp. My wife went to answer the phone and it resulted in a very serious slash to her cheek. This defect resulted in a very serious cut to her face!!
What is even more disappointing is that AT&T said that warranty does not cover this issue and said that the only way I was getting a replacement was if I paid the $125 deductible from the [email protected]*t insurance they scammed me on. I would have thought for $5/mo. I was completely covered.
The AT&T customer care rep was rude and not willing to help. A request to speak to his manager didn't get me far either. Even after I threatened to switch all 30 phones at my company back to Verizon Wireless they didn't seem to care.
At last I called HTC America directly this morning, explained my issue and they turned me over to a product specialist who told me that they know of no such issue. Despite my insistence they refused to replace the phone. Therefore, I WILL cancel all 30 lines my company has with AT&T and go back to Verizon...I hear the Samsung Omnia is not a bad smartphone!!

[Q] Blue blotches on screen?

Hi, I I tried searching for this issue but couldn't find any thread specific to my problem. In darker lighting and on dark images or video I notice some bright blotches in the left center of my screen. It's a pain watching videos with it, but does not impede use of the device. Forgive me if this is common light bleed, but I thought that was exclusive to the edge of the device. Is there any fix I can do on my own or should I try and rma?

I would personally suggest an RMA, that doesn't look right somehow...

U have heavy lightbleed on the top and bottem left side of your screen.
But those blobs in the middel should not be there.
I would suggest a RMA
Sent from my Transformer TF101 using XDA Premium App

I had those on my 16GB that I RMA'ed....now my 32GB that I got as an exchange is starting to do it as well.
Starting to regret giving Asus another chance. Never trusted their products before and with good reason......

Thanks guys I'm going to try and return it to Fry's and get the new samsung galaxy tab instead.

You're the third person I've seen with this issue in the past week which is an alarming trend to say the least.
Did it develop over time? Was it there in the beginning? Check your serial number on the box for the revision code (starts with B, EX: B5O, B4O, B6O), which is it?
Definitely RMA. It's unacceptable when there's tons of light bleed on the edges but when it's in the center that's just ****ed.

Looks like I'm too late to return, I'll have to RMA. The serial number is B4O, and I suddenly noticed it, though it's quite possible that it happened over time, I don't recall it being there when I got it.

I am having the same issue, though not as bad. I will try to post pics when I get time.
I just can't decide if a RMA is worth it.... sigh.
My Serial starts with B4O as well.
Edit: Is this actually light bleed or something else? It looks like the IPS screen was impacted before install.

I just sent one back for having a white blob in the middle of the screen about 4mm in diameter I assumed that was light bleed of some description there was plenty round the edges too..
The really worrying thing is the replacement that has just arrived, if I apply light pressure on back of tablet about two inches above asus logo it looks like something is pushing against the screen you get all those rings and what looks like a rainbow effect. I noticed it when docked and moving the screen back and forth the same effect occurs.. I never saw this on my other one, is this just cos the unit is thin and flexes or is it another badly put together tab?
I love this product, why cant it just work

Sparky32 said:
I just sent one back for having a white blob in the middle of the screen about 4mm in diameter I assumed that was light bleed of some description there was plenty round the edges too..
The really worrying thing is the replacement that has just arrived, if I apply light pressure on back of tablet about two inches above asus logo it looks like something is pushing against the screen you get all those rings and what looks like a rainbow effect. I noticed it when docked and moving the screen back and forth the same effect occurs.. I never saw this on my other one, is this just cos the unit is thin and flexes or is it another badly put together tab?
I love this product, why cant it just work
Click to expand...
Click to collapse
I only notice mine at near full brightness, and with the room pitch black. They are pretty small too. I think I may just try to live with it, as it seems RMA isn't a 100% fix either. I'm afraid I'll be without it for 10-15 business days, and possibly end up with something worse!

yep mine seems to be much worse

Sparky32 said:
yep mine seems to be much worse
Click to expand...
Click to collapse
That's ridiculous. I shouldn't be afraid of more problems after sending my unit in as a RMA. I think I am just going to hold off and reevaluate the issues in a few months. I'm just worried that the dust in my screen will continue to get worse and worse.

Can anyone speak for a device with a different serial? Also, should I wait and see if ASUS actually fixes it, or RMA as soon as possible? On a side note I thought for RMA they would send me another one and I'd ship this one back when I got the other one, does ASUS not do this?

Sparky32 said:
yep mine seems to be much worse
Click to expand...
Click to collapse
What's your S/N prefix on the replacement?

This is how it will play out:
1. You call Asus and set up an RMA with the extremely rude customer service.
2. You pay return shipping (about $14-$20) to ship it back to them.
3. They take two weeks to wait for parts and then a week to repair and send it back to you.
4. They end up replacing the LCD and not doing a replacement for the whole unit. You get a "repair", not a "replacement".
5. If you so much as leave a single ding on the unit the service center will mark it OOW (Out of Warranty) and claim no liability for repairs because you damaged it.
At this point the light bleed is so bad you really have no choice.

Tubular said:
This is how it will play out:
1. You call Asus and set up an RMA with the extremely rude customer service.
2. You pay return shipping (about $14-$20) to ship it back to them.
3. They take two weeks to wait for parts and then a week to repair and send it back to you.
4. They end up replacing the LCD and not doing a replacement for the whole unit. You get a "repair", not a "replacement".
5. If you so much as leave a single ding on the unit the service center will mark it OOW (Out of Warranty) and claim no liability for repairs because you damaged it.
At this point the light bleed is so bad you really have no choice.
Click to expand...
Click to collapse
So at this point my options are to RMA and most likely not get a fix, keep it and try to ignore the lightbleed, wait for better manufactoring/repair and then RMA, or sell it for $180 on Gazelle or maybe more on Ebay/Amazon and use that to buy the thrive or tab instead. I'm leaning towards the first and maybe the last, but I'd be paying about $750 on the last one (calculating new tablet price by adding old price and subtracting the difference.). Suggestions?

Just noticed this on my transformer. It's barely a month old! Gonna take it down to the service centre tomorrow. Ridiculous.

Thewalrus0034 said:
Thanks guys I'm going to try and return it to Fry's and get the new samsung galaxy tab instead.
Click to expand...
Click to collapse
How'd this work out for ya? I was curious how the Galaxy camp was doing so been reading through the Galaxy 10.1 forums, geez I thought we had problems, lots of similar complaints over there about build quality, keyboard lag, reboots, etc and worse of all evidently alot of them have what they call Newtons Rings effect on the tab where the top glass presses against the LCD and makes water looking blotches some of them over half the screen and it changes with temperature lulz. I have seen that stuff before on anything with an Otterbox Defender case with that built in screen protector, those always do that and it's hideous I couldn't live with my tablet doing that.

I have just sent my tf101 back for the newton rings effect you describe.. Maybe galaxy tab ain't the answer either then
Sent from my GT-I9100 using XDA App

Rubbish...just got the replacement and its got the same dumb newton ring type issue, touch the screen and you get rings n blotches.. Time for a refund.. Wonder if its a bad batch
Sent from my GT-I9100 using XDA App

The loose/unbonded screen issue...

So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.

Mine is 2 months old and i had the clicking issue from the beginning but it didn't got worse and to be honest i don't even notice the clicks anymore (i guess that my brain got used to it ).
Inviato dal mio ASUS Transformer Pad TF700T con Tapatalk 2

Ok, thanks mate... hopefully it won't get any worse. I'll give it a week or two and see if mine spreads at all.

Nexus 7 has same problem
Sent from my Nexus 7 using Tapatalk 2

MisterEz said:
So, I've just received my third Infinity, after having to send the first two back because of defects with the screen. The first had a large speck of dust trapped right under the centre of the screen, and the screen on the second gave everything a horrible yellow tinge.
The one I've just received has what looks like a perfect screen image wise, but there's a horrible clicking sound when I press along the right hand edge - so, it appears that this infinity also has a fault, which I know from reading these forums is fairly common.
I'm really starting to loose heart with this tablet - it's my first one, and as much as I want to love it, I'm sick of receiving defective units. If I return this one, then I'm going to be running the risk of receiving another with a dodgy screen or worse.
If I decide to keep this one, what are the chances of the clicking/unbonded screen becoming worse? Can anyone who's had this problem comment on whether the area that clicks has expanded over time, or if your screen has started to separate noticeably? Is this likely to happen?
I've bought through Amazon so I'm able to return it without any hassle, but I'm reluctant to go through the ASUS quality control lottery for a fourth time.
I would appreciate any advice or comments.
Click to expand...
Click to collapse
Send it back - that's not acceptable for a highend electronic product. You keep doin this until you get one with accaptable build quality or you buy another brand. Choice is yours. But never accept poor build quality in high end consumer electronics

Had mine for about 3 weeks and received a screen protector a couple of days ago, no problems with the screen but was worried applying the screen protector would show up any defects clickingwise. Panic over screen protector on and display is looking good.

Yeah, I think too many people here accept the fact that their unit has some fault and then just think "well, it could be worse. Be happy with what you got". No way! this should be THE high end tablet, one of the most expensive ones there are and then it has this kind of faults.
IF everybody would be same and think "well this is ok" then Asus wouldn't even learn from their mistakes. They would just keep on with the crappy QC and nothing would be fixed. Maybe they would even worsen the qc to save money and try to find out where is the line that people don't accept the product.
For me, I spend a lot of money and I want my unit be perfect out of the package. It is other issue then if I break it..

I too am having some screen issues, but I think I will have to send my unit back to ASUS completely. Most Dutch retailers only have a very short return period, and I've already had mine for 19 days. I guess I will contact the retailer and ask them what I should do. However, it is really unacceptable that you pay a high price for such a premium product and that it has issues that really should not ocur. The reason why I didn't go back to the retailer was because I didn't really notice it at first, it just got more annoying later on...
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

Mine has the loose screen issue all around. But no clicking. So I'm having the same debate in my mind. I think I'm going to return and try for another one.
Sent from my PC36100 using xda app-developers app

I'm returning my 2nd TF700t tomorrow 'cause of loose screen. This time it also made the clicking sound :/

Mine has a loose screen but it's the lower left hand corner by the headphone jack, hdmi port, microphone area. You don't even need to squeeze it hard, it feels hollow in that area and it makes a crunching sound. My biggest fear is the ports there are either going to get damaged or cause a short touching the case. Amazon is sending me a replacement which I should have tomorrow.
Amazon was really gracious in taking my 201 back that I bought in May, but man, WTF, I love Tegra games so the samsung tab is out and I hate Samsung with their wishy washy update and the fact they stop supporting their legacy products fairly fast.
If this next one is trash I don't know what to do, I don't want to be banned by Amazon for returns, sucks ass.

Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.

MisterEz said:
Thanks for all the replies and comments - it seems that this loose/unbonded screen issue is more widespread than I first thought...
All those who have said that I shouldn't accept this on a premium device are, of course, correct. Although the tablet seems to work properly now, I'm worried that several months down the line the screen might start to separate or some other related problem will arise, & I'll be left to deal with Asus direct for a warranty repair. It makes far more sense to get it replaced now, so I'm just about to contact Amazon to tell them that this tablet, the third one that they have sent me, is also faulty.
Here's hoping my fourth will be fault free as it'll be the last one I get - if there's a problem with it then it'll be returned for a refund & I'll start to look at other brands of tablets to buy instead.
Click to expand...
Click to collapse
If you check out the Nexus 7 forum (also an ASUS tablet) you can gleam some interesting information about the screen separation issues. It's not as easy to take the Infinity apart, so fixes aren't readily available, but I'm sure the issues are related.

I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.

Thats OK said:
I wonder if the glass and digitizer on this tablet are stuck down by something similar to double sided foam tape.
Might be a contact film type adhesive too.
My experience with these type of sticky adhesives is that sometimes a little warmth or just over time they will adhere better.
I did have a slight clicking on the bottom of my tablet, it's not there now.
Just some thoughts.
Click to expand...
Click to collapse
From the ASUS Nexus 7 forums I understand that the loose screen/screen separation may be due to adhesion issues that can be somewhat or completely solved by gentle heat followed by light, consistent pressure. Someone did try that with his Infinity with limited results but I think his frame may not have fit properly as well. The crunching sound some have reported may be due to a really crunchy type of tape used to hold down the battery, if there's any excess flex that causes the screen/digitizer to touch the tape. There was also a screen lift/light bleed issue caused by over-tightened screws in the frame holding the motherboard, etc together. That was user fixable, by just loosening the screws and making sure that they were all fairly evenly tightened. That also really helped with the light bleed issues too.

I received my replacement from Amazon, this one is all good, it even has the cooler color screen I like compared to original, sweet!

I have just sent back my second tablet to amazon after receiving the first one with nearly jammed in buttons and a clicking screen. The second one I got had a little clicking to start and then got progressively worse until I chose to return it. Amazon emailed me and said that they are just going to refund me my money instead of sending out another one with probably similar problems... don't really know what to do now... any other good tablets coming out? Haha
Sent from my Galaxy Nexus using xda app-developers app

The way these tablets are held together is via a longer L shaped plastic edge on the faceplate that mates top edge first to a the ledge built into the backshell. Once inserted under the shell at the top edge the rest of the screen can lay down into the rest of the backshell. There are smaller L shaped clips up and down the outsides which click into place via finger pressure. The bottom edge is secured by two metal slide locks which mount the front to the back much like an old style door chain where the round part fits into a large hole and then slides into a narrower opening to latch it into place.
The point of this post? if the sides or top seem loose you can probably click them together with finger pressure. if the bottom is loose the latch got locked without the round part in place. for this you should return if you have warranty left. If it crunches they probably broke an L shaped clip while assembling.

I received my 2nd Infinity today and I immediately noticed the screen on the bottom left hand corner is above the frame and the rest of the bottom part of the screen flexes when I hold it normally. I'm sending it back. I'll give the Infinity one more chance and hope I get a good one. If not, I'll have to look at other options. At some point enough is enough.
My advice for anyone that has build quality issues with their Infinity is to return it. That is a lot of money to spend to keep a tablet that could break down the line. I wouldn't take any chances, but that's just me.

Seriously though, does anyone know of any other top end tabs coming out soon? I'm tired of dealing with sh*t quality
Sent from my Galaxy Nexus using xda app-developers app

[Q] Have my tf700 for about two weeks, screen flex noticed

Hello,
I've bought my infinity two weeks ago and when I unpacked it I had noticed that on the bottom left side of the panel the screen is popping out a little bit, something like screen flex.
Yesterday, I've noticed that the left side of the panel has a flex as well.
I am really annoyed by this, since OK, I've paid a lot of money for this and now I might have to send it for a repair.
I've talked with the asus support in Greece, and the guy told me to submit a form that he would send me via email and a courier would get it from my house and it would be sent to Czech Republic for service and it would be delivered to me in a maximum of ten days.
Should I send it?
Is it really a big problem? (in example, will the whole panel pop out eventually :silly: )
I though of keeping it for some time and if it gets worse, then sending it..
What do you think?
Thank you for your time,
Sorry for the big post..

did you bu it from a store, or online? if from online, send it back to the company and have them send you another. this might be quicker than sending to ASUS.

I bought it from a store in Greece..I called them and they referred me to Asus support in Greece..
Is this screen flexing a big problem or I can leave with it?

pspuser007 said:
I bought it from a store in Greece..I called them and they referred me to Asus support in Greece..
Is this screen flexing a big problem or I can leave with it?
Click to expand...
Click to collapse
i dont see they the store cant exchange it. especially if you have the receipt.
im not sure if its a big problem, but i wouldnt want a device that has defects like that.

timrock said:
i dont see they the store cant exchange it. especially if you have the receipt.
im not sure if its a big problem, but i wouldnt want a device that has defects like that.
Click to expand...
Click to collapse
They won't
I might keep it for a while..I've stopped noticing it too much..The thing is, if it's something normal that did occur from the manufacturing process then I'm OK with it. I just don't want to end up holding the tablet at one hand and its screen at the other

pspuser007 said:
They won't
I might keep it for a while..I've stopped noticing it too much..The thing is, if it's something normal that did occur from the manufacturing process then I'm OK with it. I just don't want to end up holding the tablet at one hand and its screen at the other
Click to expand...
Click to collapse
From what I've read this is very normal for the Infinity. A lot of people have had similar problems with screen flex or even screen separation. Unfortunately most of them when the receive a replacement, the replacement is either the exact same problem or is even worse. So there is definitely something with the Gorilla Glass and their manufacturing process causing this that they haven't ironed out yet.
From what I've read if it's minor then it shouldn't be too big a problem (some people have the Gorilla Glass almost peeling off). I just got mine and notice the screen sticks up slightly above one of the dock connection points on mine, but knowing the problems others have had I'll use mine for a few days to see if it's worth returning.
So while you can certainly return if you want, considering what you paid it's understandable. But just know that the replacement you get is likely to have at least the same problem, and might actually be worse then the one you sent in. Another somewhat common problem is light bleed, which I think I have on mine also.

bobby2478 said:
From what I've read this is very normal for the Infinity. A lot of people have had similar problems with screen flex or even screen separation. Unfortunately most of them when the receive a replacement, the replacement is either the exact same problem or is even worse. So there is definitely something with the Gorilla Glass and their manufacturing process causing this that they haven't ironed out yet.
From what I've read if it's minor then it shouldn't be too big a problem (some people have the Gorilla Glass almost peeling off). I just got mine and notice the screen sticks up slightly above one of the dock connection points on mine, but knowing the problems others have had I'll use mine for a few days to see if it's worth returning.
So while you can certainly return if you want, considering what you paid it's understandable. But just know that the replacement you get is likely to have at least the same problem, and might actually be worse then the one you sent in. Another somewhat common problem is light bleed, which I think I have on mine also.
Click to expand...
Click to collapse
I've noticed the same across the bottom in mine. It appears exactly where the docking latched are located. I'm no longer going to leave the dock attached. I'll hook it when I really need it then remove and put it aside. I'd say the dock is putting too much strain on the glass. The docking hinge on mine is VERY tight to flip;p open and closed as well

Busted Screen...Design flaw?

:crying:
LONG VERSION:
Well when I first got my idol 3 on May 23rd the first thing I did before turning it on was to install a cheap plastic screen protector. I then turned it on, played with it and poured over the outside of the phone. Build seemed good. The only area I genuinely disliked was the design choice laying the glass screen on TOP of the frame/bezels. It looks nice but I thought at the time, 'makes me worry about dropping it, even with a case'. I always use TPU cases with no problems and installed it on the idol. Today my screen shattered. I did not drop the phone (haven't dropped it once in the 3+ weeks I've owned it). I did not bump into anything. The phone was in my side pocket of my work pants (not 'skinny' jeans I wear loose pants/jeans. Side rant: no disrespect to the hipsters but skinny jeans are not in my vocabulary, I don't know anyone that looks good in them ) while I drove from work around the corner to Wegmans (grocery store). Got in the store and pulled out my phone only to see a shattered screen. I thought it was my tempered screen protector ( I put that on a few days after getting the phone once they were in stock) until I noticed I couldn't use the bottom 2/3 of the touchscreen. Digitizer was shot. Ugh. Looking back the only point I can think of where any pressure was applied to the screen would be when I got out of the car and my pants probably tightened when pivoting off the seat. Seriously. That's it. I must have done the same thing 2 dozen times as I almost always go to Wegmans after work and since it's so close I leave the phone in my pocket (loose pockets!!). Afterwards while driving home I always put the phone in it's holster on the dash. I got home and pulled the tempered glass off (incidentally the glass protector is fine..) and took a closer look. Remember "Bendgate" with the 6-plus? Yeah my phone is also ever so slightly bent as well. I baby the hell out of my phone, not a scratch or nick anywhere on the body. I'm so disappointed. I absolutely love this phone and yesterday I would rate alcatel/the phone a 4.5 out of 5 for a stellar product with few issues (obv. the pervasive DT2W issue). But after today I strongly believe they messed up their design by putting the glass on top of the frame and not embedded within the bezels like almost every other phone out there. I'm preparing my email to alcatel now in hopes I get something from them but I know they have no reason to believe my story as to how this happened. I don't believe my actions were a result of misuse by any means as I've owned plenty of smartphones without ever breaking one. I don't expect anything from Alcatel but I seriously hope their next iteration of this phone will be better protected. I'm creating this thread as a warning to all the other owners out there that you need to be very careful handling this phone, If a simple motion such as this can result in a broken screen then I'm sure that a drop will be just as bad even with a tempered glass protector. So everyone PLEASE be careful! Personally I am distrustful of the device's build quality now and will hang on to this until I can buy a replacement screen/digitizer and attempt to replace it myself ( a review on Amazon a few days ago mentioned that screen replacement costs $150, almost the price I paid for the thing) though I will wait to hear back from Alcatel. I'll try to upload a couple pics of the phone, but really all you'll see is an otherwise pristine phone with a broken screen and the leftover residue from my tempered protector (now removed). Ugh, this sucks
Short Version:
My screen broke while in my pocket from minimal to barely moderate pressure and is also now bent, ala #Bendgate. WTF

I can't believe this phone broke that easy, it was either a defective phone or its just fragile. I'm really thinking of returning this phone since it has so many things to it.
Sent from my 6045I

I hope it was just a dud for everyone else's sake, problem is I don't expect Alcatel to replace it under warranty and I'm not willing to spend 75% of what I paid for it on a new screen. THe other issues are minor to me personally, with DT2W being the biggest annoyance. I barely get any lag with animations on top speed and nova launcher and I'm satisfied with the camera for the price point. My previous phone, the HTC One m7 was great until it got the lollipop 5.02 update and then lagged like crazy so I truly believe performance issues will be resolved with an update/root. I'm really devastated this broke so easily as the screen size/front speakers were exactly what I wanted in a phone, not to mention the great battery life I get vs. old phone.

Dang I have a tpu case and tempered glass but I'm scared now lol thinking of returning and getting a OPO
Sent from my 6045I

I seriously considered the opo but for me band support was paramount. I wonder if a hard case would be better for this phone, I know they're harder on the body but would presumably give a bit more structure for the phone. OT, I finally have a use for the reversible feature as it allows me to type on the phone and open most apps flipping the thing upside down over and over :/

Hopefully its not a defect to all phones. I only have till Monday to figure out if I want to return it
Sent from my 6045I

psu2fan said:
I hope it was just a dud for everyone else's sake, problem is I don't expect Alcatel to replace it under warranty and I'm not willing to spend 75% of what I paid for it on a new screen. THe other issues are minor to me personally, with DT2W being the biggest annoyance. I barely get any lag with animations on top speed and nova launcher and I'm satisfied with the camera for the price point. My previous phone, the HTC One m7 was great until it got the lollipop 5.02 update and then lagged like crazy so I truly believe performance issues will be resolved with an update/root. I'm really devastated this broke so easily as the screen size/front speakers were exactly what I wanted in a phone, not to mention the great battery life I get vs. old phone.
Click to expand...
Click to collapse
Have you approached Alcatel to see if they will replace the device/display under warranty? Clearly you did not do anything out of the ordinary - drop it to knock it against something - so they *should* replace it, and if not, you should be able to take it up with your credit card company. I feel sorry for your situation. I got my phone for $200, have no problems except the lag ( and more recently more frequent d2w issues ) - and I am waiting for something like you to happen to me. At that time I will have to take it up with Alcatel , because I certainly want to keep the device, for its bright screen and loud speakers alone, for the $200 I paid.
Electronics are not flawless articles - but my suggestion would be give Alcatel support a chance. This will also tell all of us, how good their support really is. Abt 4 years back, I was one of the lucky ones that got in on the $99 HP Touchpad sweepstakes - and right after I got it, the display panel started malfunctioning. So I took it up with HP and they sent me a prepaid box - and had me ship the tablet back to them - and returned it to me after replacing the display. Since that day, that device has been a workhorse for me - Best $90 I ever spent on a piece of electronics. So my point is - sometimes - your immediate experience will be negative - but it is worth give it another chance. And these days, usually your CC company will come to your rescue in such matters.

Oh absolutely. I guess I wasn't very clear about that but I'm retelling my story with them. I certainly hope they do something about it, I just have my doubts.I'll have to read through the terms on my credit card, can't remember if I used Amex or Discover for it.. but I thought you just got an extended warranty through them, no?

Ok I sent out my lengthy email to Alcatel just now, so I'll update this thread when I hear back from them. Also I looked into my purchase and I did use Discover which includes 90-days device coverage including broken screens so I'm covered in case Alcatel doesn't come through. Thanks stl1859, I would not have remembered that if you didn't mention it.

psu2fan said:
:crying:
Short Version:
My screen broke while in my pocket from minimal to barely moderate pressure and is also now bent, ala #Bendgate. WTF
Click to expand...
Click to collapse
many of todays phones has this 2.5D corners, so bad luck...it happens. I got ZTE V5, felt many times so i bought screen protector shield (plastic, not foil) and rugged back cover...anyway felt from 50cm to the ceramic tiles and got broken screen..it happens ...**** happens. Hope you will get osme satisfactory. And minimal to barely moderate pressure, really? Do you think that his would someone believe?

DallasCZ said:
many of todays phones has this 2.5D corners, so bad luck...it happens. I got ZTE V5, felt many times so i bought screen protector shield (plastic, not foil) and rugged back cover...anyway felt from 50cm to the ceramic tiles and got broken screen..it happens ...**** happens. Hope you will get osme satisfactory. And minimal to barely moderate pressure, really? Do you think that his would someone believe?
Click to expand...
Click to collapse
I know it's hard to believe, I have a hard time believing it. Which is precisely why I posted about this. And yes it was minimal to moderate pressure. I did not drop the device, it was in my pocket and I didn't bump into anything. The only pressure exerted was from my pants as I shifted to the left to get out of the car. I've certainly been fortunate over the years to have never broken a screen; I've dropped my previous phones a handful of times, even rolled over one while it was in my pocket. If any of those things would have happened and resulted in a broken screen/bent phone I wouldn't be posting here.. I expect that outcome in those situations. Also no I don't expect Alcatel to believe me, which is why I was so worried about spending my money on a device only to have it fail in this manner. Thankfully due to the suggestion of another member I will be covered thanks to my CC company.

You are still going to try getting a replacement from Alcatel, right ? I am really interested in knowing how efficient they are in handling repair/exchanges.

stl1859 said:
You are still going to try getting a replacement from Alcatel, right ? I am really interested in knowing how efficient they are in handling repair/exchanges.
Click to expand...
Click to collapse
Yes, I'm currently waiting on them. Since I submitted the support email going into the weekend I'm giving them through Monday to reply before I start calling them.

Well, As expected.. BTW the phone number listed is not valid. Had to initiate claims online at alcatel.finetw.com Customer care didn't care (haha) how the phone broke, though I wouldn't expect them to. I'll include a copy of my original email with the phone so that hopefully the tech at least takes a look at the strength of the phone.
Dear xxxxxx,
Thank you for getting in touch with us. We understand your concern and we will be happy to assist you. Unfortunately with physical damaged the warranty gets void, so you can contact the repair center and ask how much they will charge you to fix device, the phone number is 496-484-6610..
Best regards,
ALCATEL ONETOUCH

First, that is a pathetic response. With that kind of attitude, they are not going to gain many customers. Second, I don't think that is a valid statement at all. Defects can cause 'physical damage'. It is a piece of electronics after all . If they are not covering 'physical damage' - what are they covering - emotional damage !!!
They probably meant physical *abuse* - which in your case - there was none. So I do not think they have grounds to decline warranty. It appears that they are simply assuming there was 'physical abuse' . Let me ask you - did you explain the incident - to the level of detail that you did over here ? ( meaning how it was in your pant's pocket - and how there might have been some pressure when you tried to get out of your vehicle , etc etc. ) - Or did you simply tell them that you discovered the screen to be shattered one fine day when you took it out of your pocket ?
Are you still engaging with them, or are you going to go to your CC company now ? I am disappointed with their support. Clearly, the only way they can sell anything if they keep pricing their products dirt cheap. Even then, I would think twice before buying from them.

I'm just thinking that this is going to be my last Alcatel product if I even decide to keep it. This support is pretty bad.
Sent from my 6045I

I keep mine in jeans, including skinny jeans and don't have these issues. It doesn't have much give so I have to position it in the pocket with the least pressure points. I would expect screen separation before screen cracking since it is plastic. I have had issue when its hot the double tap to wake will turn on the lock screen and dial contacts if the pocket is big enough for it to move around. So far I am impressed with dragontrail being less prone to fingerprints, but I do everything to avoid scratches and cracks short of a screen protector so take that into consideration.

i dont think any brand will buy your story even if its true. any physical dmg will become a user end fault no matter which product you purchase since theres no way to prove its their manufacturing fault when its physical defect and the end user is using it.
Sent from my 6045I using XDA Free mobile app

This is really the crux of it. And why I said I did not expect them to do anything. The only way to uncover a design flaw IMO is if this starts happening a lot (like bendgate.. well maybe not a lot in that case but some people showing on video how easily it bent). Also yes I went into great detail about the when/where/how the device broke. I also included the details with the phone, imploring the tech to at least look at the device to determine if there's a structural weak point or something. Sorry I took so long to reply, I've been getting my backup device (LG Leon.. ok phone for price but slooooow) setup and haven't been to the site in a few days.
gavolo said:
i dont think any brand will buy your story even if its true. any physical dmg will become a user end fault no matter which product you purchase since theres no way to prove its their manufacturing fault when its physical defect and the end user is using it.
Sent from my 6045I using XDA Free mobile app
Click to expand...
Click to collapse

Yeah I'm going through the CC company now. Interestingly I had to pay $40 to send the device back listing the screen as broken, so maybe (knock on wood) it won't be as expensive after all