Hi!
I was heartbroken when my MT4GS broke recently. I need a replacement screen assembly for it. I've been looking on ebay, but I only see phones with broken screens or individual service parts. I have a working motherboard but, I need the entire screen assembly replaced.
If anyone has a bricked (or fully working) MT4GS with an otherwise nice looking (and working) screen that's just lying around collecting dust that they would be willing to sell cheap, I would be very happy. I should mention I live in Europe. I'll cover any fees, obviously.
Alternatively, does anyone know of a worthy successor (GSM Android QWERTY slider)?
Thanks.
You should try ebay. there are all sorts of spare parts for this phone and you can get just the part you need without having to buy an entire phone. At least that way you will spend less and not end up with parts you do not need.
very true, this happens to be one of the more pain in the ass phones to fix but it still isnt all to bad. a new digitizer (and very likely will need a new lcd as near impossible to separate) will be in the range of 50$ if you need more than this other parts arent too expensive and not terrible to replace.
as a successor... there really isnt one, closet upgrade with a qwerty is the galaxy relay, others may disagree but between the vision and the doubleshot i am hard pressed to find a true high quality qwerty phone
demkantor said:
very true, this happens to be one of the more pain in the ass phones to fix but it still isnt all to bad. a new digitizer (and very likely will need a new lcd as near impossible to separate) will be in the range of 50$ if you need more than this other parts arent too expensive and not terrible to replace.
as a successor... there really isnt one, closet upgrade with a qwerty is the galaxy relay, others may disagree but between the vision and the doubleshot i am hard pressed to find a true high quality qwerty phone
Click to expand...
Click to collapse
I've never had any trouble getting my LCD out. Though my phone had been opened before, so the sticky wasn't as well stuck to the backside of the LCD. You can use a bit of hairdryer heat to loosen the adhesive.
Now digitizers... Those I seem to burn through.
Well, I suspected that the cable connecting the screen to the motherboard had become damaged, due to the touch function and screen dying when sliding the phone open. I did order a spare part on ebay but in trying to seperate it from the LCD, I ended up making it worse. I did use a hairdryer to warm up the adhesive, alas, it seems I wasn't careful enough. The end result is that I now have a "bottom" part (keyboard, motherboard, etc.) which is (presumably) still undamaged, but I need an entirely new screen assembly.
Related
i just noticed the corner near the home button has a tiny bend that starts seperated from the layer beneath it....it looks like an old screen protector got a little bend in the corner but that is the surface of the phone!!! is there anyway to replace it or i cant do anything just waiting for it to come off?
it is ridiculous how an expensive phone like touch pro uses such low quality plastic that can actually get bend and i feel really helpless now =(
Yeah, mine is doing that too. Except it's on the "back" button side. It doesn't really affect anything. I'm just worried that if something gets caught on it, it might peel back further.
Nothing can make this phone suck though! It rules!!!
Yeah, unfortunately the TP/Diamond are suffering from some manufacturing defects, probably because it's a "new" design style for HTC. My TP has a touchscreen defect that conveniently showed up after the two-week return/exchange period.
Protective case, learn to love it.
Do you guys think they would be willing to replace a new case if i pay them?
My device shows the same behavior since this morning. Its about 1mm, so nothing to worry about and it seems to stick pretty well on the rest, thinking about rasping the edge off a bit to make it smoother
Is this getting worse on yours? Last post is 3 weeks ago .......
Any chance someone would post a picture of this? I'm thinking about the Fuze, but I can't stomach another HTC phone full of hardware flaws.
season007 said:
Do you guys think they would be willing to replace a new case if i pay them?
Click to expand...
Click to collapse
If it's really a defect, they should replace it without you paying them.
Considering that ATT offers a 1 year manufacture warranty. I can't see why you wouldn't be able to return the phone and get a replacement. It is obviously a problem with the design of the phone.
It wouldn't hurt to try and go to an ATT store and see if you can get a new FUZE!!!
Well, as we all know, HTC always claims that they don't know anything about the problems we address to them.
When I first complained to their support that I am having GPS lag, they told me I was the only one in the whole world suffering that problem, so it must be related to the software I installed.
Luckily they can not deny hardware problem so easily, as long as it is clear that there wher enot caused by misuse.
I don't have this particular problam, yet, but as I am already on my thrid TP (the first two had a defect hardware keyboard and black paint falling off), I would like to get some photo evidence of the users here, who unfortunately have the button part coming off.
That way we can show to HTC that more users have that problem, before we send back our devices, and maybe negotiate a direct replace, instead of rapair procedure, which takes up to 2 weeks.
season007 said:
i just noticed the corner near the home button has a tiny bend that starts seperated from the layer beneath it....it looks like an old screen protector got a little bend in the corner but that is the surface of the phone!!! is there anyway to replace it or i cant do anything just waiting for it to come off?
it is ridiculous how an expensive phone like touch pro uses such low quality plastic that can actually get bend and i feel really helpless now =(
Click to expand...
Click to collapse
My AT&T Fuze started doing the same thing after just two months. However, the bent plastic corner of the clear laminate was RAZOR sharp. My wife went to answer the phone and it resulted in a very serious slash to her cheek. This defect resulted in a very serious cut to her face!!
What is even more disappointing is that AT&T said that warranty does not cover this issue and said that the only way I was getting a replacement was if I paid the $125 deductible from the [email protected]*t insurance they scammed me on. I would have thought for $5/mo. I was completely covered.
The AT&T customer care rep was rude and not willing to help. A request to speak to his manager didn't get me far either. Even after I threatened to switch all 30 phones at my company back to Verizon Wireless they didn't seem to care.
At last I called HTC America directly this morning, explained my issue and they turned me over to a product specialist who told me that they know of no such issue. Despite my insistence they refused to replace the phone. Therefore, I WILL cancel all 30 lines my company has with AT&T and go back to Verizon...I hear the Samsung Omnia is not a bad smartphone!!
Hey guys, the GF left her phone up high and was knocked down and now the screen seems to be dead. Lights up for a moment when turning on then just goes dark. Pretty sure it's operating fine underneath (still need to plug in to computer to check for connectivity), but assuming just the screen needs to be replaced, what are my options?
Is that something I could possibly replace or perhaps send it off to somebody on this forum for repair? How much ($) are we looking to fix? Better to just sell on ebay?
Thanks!
I did a quick search on ebay concerning a new LCD for the Atrix 2 and they seem to cost around 80 bucks... I don't know if that would be a worthy investment since depending on your contract you can maybe get a new one for about that price...
What I can tell you from personal experience is that it is most likely to be a major pain in the ass to replace the screen on your own... I once changed the front frame of my HTC Desire and I basically had to disassemble EVERYTHING including unglue-ing the touchpanel from the frame taking out all sorts of boards and stuff, and I never got rid of the little dust that would get between digitizer and LCD..... (the memories )
But I'd say if you're confident in your technical skills and a new LCD would be worth your money then you might consider going for it...
I don't know but I'd estimate the cost of a professional repair around $150-$200...
One tip just in case: Make sure that no dust gets onto your screen/on the inside of your tuchpanel because once you start "cleaning" it off (with a towel) you'll never get it as clean as it was...
Has anyone ever replaced this Lcd and Digitizer. My digitizer has cracked and seems like the best bet is to buy the lcd and digitizer together.
I believe most phones have a serious adhesive under the digitizer pane so its worth just getting them together.
Here is what i am looking at. I am technically competent and confident i can take apart this phone without breaking it.
How does this screen look .
http://www.amazon.com/ePartSolution...qid=1425335732&sr=8-1&keywords=htc+one+m8+lcd
Having a cracked screen is not acceptable to me even if its small.
Replacing the screen is fairly easy on the m8 compared to the m7.. All you have to do is take the charging board off and the flex cables will slide out.. Try to save the tape.. I have gotten phones without it and they don't perform as they should. Watch this video it will help. http://youtu.be/f1qk8YSWg8k
If you've never done a screen replacement for you may want to take it or send it somewhere (and don't forget if it's less than 6 months old, HTC will replace it for free). It's certainly much easier than the M7, but for a beginner it's still one of the more difficult screen replacements. You may need to purchase the speaker grilles and some strong adhesive - I would recommend this - https://www.wholesalegadgetparts.com/product.php?productid=22096&cat=0&page=1 - it's the best stuff on the market. They have many different widths for sale on their site (I also highly recommend that site in general, but they are out of stock on M8 screens until the 16th - excellent warranty and best customer service in the business).
Hey everyone,
It's been a while since I last posted on here, and in attempting to avoid a pessimistic undertone, the G7 Power is actually a really good phone: the battery really does last for ages (I charge it once every two days, and it has never been below 40%), and it is surprisingly loud (everywhere). I am a pretty casual user now, rarely playing games or other media, but I am impressed with the difference compared to upgrading from a Moto G4. Some apps which appear as though they were designed for more premium screens - logos, icons, widgets - definitely lose some fidelity around the edges and these can look a bit poor on the 720p screen, but I have become oblivious (or distracted from) a lot of the finer details already.
And now the question: where, and how, would I be able to repair a cracked screen?
It feels like a pretty silly question; but the screen has 'developed' a crack from the bottom-right corner of the new notch, to about 2cm underneath the power button.
I say develop, as the phone is always within eyesight or kept in a pocket. It has never been dropped onto a surface harder than a pillow, and the case/screen protectors are still yet to arrive. It has been in my possession for about 12 days, and it lasted for 6/7 of those. I still have no clue when or why the crack appeared.
The question is a combination of where/when/how, I have contacted Motorola Technical Support, and explained the situation leading up to the cracked screen. The response was (exactly): "we do not process repair of the screen, what we offer is replacement of the whole device", they also said that this service will cost a fee (shipping + device) depending on the IMEI information. A single crack on the screen resulting in the replacement of a whole device seems pretty excessive, and the support member did not acknowledge that it is a brand new phone, or that it is* under warranty.
This is the first cracked screen from all previous handsets, so I am not sure what to do: is there any way to avoid replacing the whole device? How does this effect any warranty? What if I/whomever repairs the device creates other issues? When would services and replacement parts become available? XDA always has a someone whom is knowledgeable in these areas, and it would be great to hear some helpful advice from the community on how to proceed,
Thanks all,
MrSpuddy
(Also - the phone was bought directly from the Lenovo website - and I was hopeful that the "one free screen replacement" still worked)
mrSpuddy said:
Hey everyone,
[ quote edited to save space]
And now the question: where, and how, would I be able to repair a cracked screen?
Click to expand...
Click to collapse
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...
zerogun said:
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...
Click to expand...
Click to collapse
The solution provided by the company was just to buy a new phone; which was not very helpful at all. My collection of screen protectors arrived, and the one on the phone is a lot more robust than the original screen.
Thank you for providing the video.
These screens are very easy to replace... Multiple times...
I have the moto g7 and I have replaced the screen four times, and I'm getting another screen in the mail this weekend, because this *[email protected]_-HJN' SUCKS DONKEY WHATEVER. I like the phone, but for some reason, the screen doesn't like to stay in one piece. All you need is a hair dryer and a new screen. Amazon has them. But you have to watch out; there are counterfeits out there. Buy from two different vendors, and return the counterfeit. Here's how to tell: make sure the printing on the ribbon cable is the same as the one you're replacing. Make sure that the printing on the back plate is the same as the original. You won't know until you take the screen off, which replacement is legit. But it's just one connector and some glue. Way easy, or mail it to me and I'll fix it.
So a few weeks ago I was an idiot and crushed my OnePlus 8 in my trunk. I realized while I was closing it what was happening, so I was able to keep it from closing all the way and, surprisingly, the phone still works. Parts of the screen sometimes work and I was able to get a remote screen pulled up using adb and scrcpy. The phone still runs fine, cameras work, speakers work, battery life seems fine, etc. The big problem is that not only is the screen broken, it seems that I bent the frame a little too.
I don't have money to buy a brand new phone and I don't have any warranty so I'm in a position of needing to repair what I have. Does anyone have any suggestions for where I can get a new screen? Ideally I'd also like to buy a new frame so I don't have to try and bend my existing frame flat; I think it might break or the screen may not sit right if I don't do it perfectly. I've looked at a couple of places like Witrigs who actually sells a frame and screen assembly together, but I've read some bad stuff about them online and am afraid to go through with a purchase.
Also, I've noticed that OnePlus reduced the pricing on their in-house repair options recently so now it looks like it would be $160 + a $30 service charge so this might actually be the best option. I'm afraid though that once they get it they might have to replace the frame too and might charge a ton more or even decide to replace other components that aren't necessary.
The frame if distorted is probably toast. It's easier to replace both if they come as a unit.
If the service center it using OEM parts... go for it.
If you do it yourself follow full ESD protocols. The separate assemblies are very susceptible to ESD damage once out of circuit.
James.ptrsn said:
So a few weeks ago I was an idiot and crushed my OnePlus 8 in my trunk. I realized while I was closing it what was happening, so I was able to keep it from closing all the way and, surprisingly, the phone still works. Parts of the screen sometimes work and I was able to get a remote screen pulled up using adb and scrcpy. The phone still runs fine, cameras work, speakers work, battery life seems fine, etc. The big problem is that not only is the screen broken, it seems that I bent the frame a little too.
I don't have money to buy a brand new phone and I don't have any warranty so I'm in a position of needing to repair what I have. Does anyone have any suggestions for where I can get a new screen? Ideally I'd also like to buy a new frame so I don't have to try and bend my existing frame flat; I think it might break or the screen may not sit right if I don't do it perfectly. I've looked at a couple of places like Witrigs who actually sells a frame and screen assembly together, but I've read some bad stuff about them online and am afraid to go through with a purchase.
Also, I've noticed that OnePlus reduced the pricing on their in-house repair options recently so now it looks like it would be $160 + a $30 service charge so this might actually be the best option. I'm afraid though that once they get it they might have to replace the frame too and might charge a ton more or even decide to replace other components that aren't necessary.
Click to expand...
Click to collapse
It depends on where you live. If you are from the USA, I recommend iFixScreens. They Provide free diagnosis of your phone, give you estimate charges, and provide 180 days warranty.