Database Info

Phone dropped, screen dead... Options?

Hey guys, the GF left her phone up high and was knocked down and now the screen seems to be dead. Lights up for a moment when turning on then just goes dark. Pretty sure it's operating fine underneath (still need to plug in to computer to check for connectivity), but assuming just the screen needs to be replaced, what are my options?
Is that something I could possibly replace or perhaps send it off to somebody on this forum for repair? How much ($) are we looking to fix? Better to just sell on ebay?
Thanks!

I did a quick search on ebay concerning a new LCD for the Atrix 2 and they seem to cost around 80 bucks... I don't know if that would be a worthy investment since depending on your contract you can maybe get a new one for about that price...
What I can tell you from personal experience is that it is most likely to be a major pain in the ass to replace the screen on your own... I once changed the front frame of my HTC Desire and I basically had to disassemble EVERYTHING including unglue-ing the touchpanel from the frame taking out all sorts of boards and stuff, and I never got rid of the little dust that would get between digitizer and LCD..... (the memories )
But I'd say if you're confident in your technical skills and a new LCD would be worth your money then you might consider going for it...
I don't know but I'd estimate the cost of a professional repair around $150-$200...
One tip just in case: Make sure that no dust gets onto your screen/on the inside of your tuchpanel because once you start "cleaning" it off (with a towel) you'll never get it as clean as it was...

[Q] Anyone got a MT4GS (may be bricked) for sale?

Hi!
I was heartbroken when my MT4GS broke recently. I need a replacement screen assembly for it. I've been looking on ebay, but I only see phones with broken screens or individual service parts. I have a working motherboard but, I need the entire screen assembly replaced.
If anyone has a bricked (or fully working) MT4GS with an otherwise nice looking (and working) screen that's just lying around collecting dust that they would be willing to sell cheap, I would be very happy. I should mention I live in Europe. I'll cover any fees, obviously.
Alternatively, does anyone know of a worthy successor (GSM Android QWERTY slider)?
Thanks.

You should try ebay. there are all sorts of spare parts for this phone and you can get just the part you need without having to buy an entire phone. At least that way you will spend less and not end up with parts you do not need.

very true, this happens to be one of the more pain in the ass phones to fix but it still isnt all to bad. a new digitizer (and very likely will need a new lcd as near impossible to separate) will be in the range of 50$ if you need more than this other parts arent too expensive and not terrible to replace.
as a successor... there really isnt one, closet upgrade with a qwerty is the galaxy relay, others may disagree but between the vision and the doubleshot i am hard pressed to find a true high quality qwerty phone

demkantor said:
very true, this happens to be one of the more pain in the ass phones to fix but it still isnt all to bad. a new digitizer (and very likely will need a new lcd as near impossible to separate) will be in the range of 50$ if you need more than this other parts arent too expensive and not terrible to replace.
as a successor... there really isnt one, closet upgrade with a qwerty is the galaxy relay, others may disagree but between the vision and the doubleshot i am hard pressed to find a true high quality qwerty phone
Click to expand...
Click to collapse
I've never had any trouble getting my LCD out. Though my phone had been opened before, so the sticky wasn't as well stuck to the backside of the LCD. You can use a bit of hairdryer heat to loosen the adhesive.
Now digitizers... Those I seem to burn through.

Well, I suspected that the cable connecting the screen to the motherboard had become damaged, due to the touch function and screen dying when sliding the phone open. I did order a spare part on ebay but in trying to seperate it from the LCD, I ended up making it worse. I did use a hairdryer to warm up the adhesive, alas, it seems I wasn't careful enough. The end result is that I now have a "bottom" part (keyboard, motherboard, etc.) which is (presumably) still undamaged, but I need an entirely new screen assembly.

Screen damaged what should i do

My sister just broke her moto x pure.
The display works, however the digitizer do not works correctly. Cannot post pictures because the wallpaper is containing private information and i cannot change it.
She cannot use the entire screen.
For example on the lockscreen, she cannot use the 8. And the other digits works very badly. So she cannot unlock her phone.
What should I replace (screen, digitizer...) and where should I find the replacement part ?
Thank for your help

You'll need to replace both the digitizer + display as they come together. If you are good at repairing phones, you can get the display from eBay or else send your phone to service center if you don't. I would suggest you to send it to the service center.

You could use a USB OTG cable to connect a mouse and thus regain control of the device in order to clear any sensitive information prior to having someone fix it. I have bought and fixed several Moto X pure edition phones with cracked screens for family members. Most of them did alright, but one phone had the screen replaced, then a cow stepped on it. Although it didn't crack, after a while parts of the screen stopped responding to touch. The screen I replaced it with has not been damaged at all, but parts of it have stopped responding to touch as well. Sometimes I wonder if these phones don't have a particularly weak and easily damaged screen. I sometimes get my replacement screens from GadgetFix. If you fix it yourself make absolutely sure that you get a screen+frame assembly. It's just a few dollars more, and totally worth it. And be careful when you transfer the speaker grill trim to the new screen that you don't press hard enough to crack the screen.

Thanks you, I think I will change the screen and the frame.
https://m.ebay.com/itm/For-Motorola...%3A7550533015e0a9cbd9f98f63fff20079%7Ciid%3A2
Is this what I should buy ?

The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html

zstricky said:
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
Click to expand...
Click to collapse
Thanks !
Could you point me to a tutorial or a video explaining how to change the screen

I believe that Ifixit has a whole teardown tutorial for this phone. If not just search YouTube for (phone model) screen replacement, watch it a time or two, and then pause it while you do each individual step. If the first video you watch doesn't explain things in an understandable manner just watch another one. It's been a while since I searched for one, but I think there are at least a few good ones.

Cracked Screen

Hey everyone,
It's been a while since I last posted on here, and in attempting to avoid a pessimistic undertone, the G7 Power is actually a really good phone: the battery really does last for ages (I charge it once every two days, and it has never been below 40%), and it is surprisingly loud (everywhere). I am a pretty casual user now, rarely playing games or other media, but I am impressed with the difference compared to upgrading from a Moto G4. Some apps which appear as though they were designed for more premium screens - logos, icons, widgets - definitely lose some fidelity around the edges and these can look a bit poor on the 720p screen, but I have become oblivious (or distracted from) a lot of the finer details already.
And now the question: where, and how, would I be able to repair a cracked screen?
It feels like a pretty silly question; but the screen has 'developed' a crack from the bottom-right corner of the new notch, to about 2cm underneath the power button.
I say develop, as the phone is always within eyesight or kept in a pocket. It has never been dropped onto a surface harder than a pillow, and the case/screen protectors are still yet to arrive. It has been in my possession for about 12 days, and it lasted for 6/7 of those. I still have no clue when or why the crack appeared.
The question is a combination of where/when/how, I have contacted Motorola Technical Support, and explained the situation leading up to the cracked screen. The response was (exactly): "we do not process repair of the screen, what we offer is replacement of the whole device", they also said that this service will cost a fee (shipping + device) depending on the IMEI information. A single crack on the screen resulting in the replacement of a whole device seems pretty excessive, and the support member did not acknowledge that it is a brand new phone, or that it is* under warranty.
This is the first cracked screen from all previous handsets, so I am not sure what to do: is there any way to avoid replacing the whole device? How does this effect any warranty? What if I/whomever repairs the device creates other issues? When would services and replacement parts become available? XDA always has a someone whom is knowledgeable in these areas, and it would be great to hear some helpful advice from the community on how to proceed,
Thanks all,
MrSpuddy
(Also - the phone was bought directly from the Lenovo website - and I was hopeful that the "one free screen replacement" still worked)

mrSpuddy said:
Hey everyone,
[ quote edited to save space]
And now the question: where, and how, would I be able to repair a cracked screen?
Click to expand...
Click to collapse
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...

zerogun said:
Please see the teardown video here: https://forums.androidcentral.com/m...-power-xt1955-disassembly-teardown-video.html
I repair a lot of phones as a hobby. And phone that are assembled front to back are hard as hell to fix. You have to remove pretty much everything to get to the screen. Contrast that with something like the Pixel phone where the screen is connected last. You just have to pry up the screen and unplug the cable. Fixing the screen on the Moto G7 may not be worth it.
My recommendation is to use your phone as long as you can and then buy a new one. Hopefully by then it will not be as expensive as it is now. I know, it is not much of a solution...
Click to expand...
Click to collapse
The solution provided by the company was just to buy a new phone; which was not very helpful at all. My collection of screen protectors arrived, and the one on the phone is a lot more robust than the original screen.
Thank you for providing the video.

These screens are very easy to replace... Multiple times...
I have the moto g7 and I have replaced the screen four times, and I'm getting another screen in the mail this weekend, because this *[email protected]_-HJN' SUCKS DONKEY WHATEVER. I like the phone, but for some reason, the screen doesn't like to stay in one piece. All you need is a hair dryer and a new screen. Amazon has them. But you have to watch out; there are counterfeits out there. Buy from two different vendors, and return the counterfeit. Here's how to tell: make sure the printing on the ribbon cable is the same as the one you're replacing. Make sure that the printing on the back plate is the same as the original. You won't know until you take the screen off, which replacement is legit. But it's just one connector and some glue. Way easy, or mail it to me and I'll fix it.

Screen and Frame Replacement Recommendations / OEM Repair Thoughts

So a few weeks ago I was an idiot and crushed my OnePlus 8 in my trunk. I realized while I was closing it what was happening, so I was able to keep it from closing all the way and, surprisingly, the phone still works. Parts of the screen sometimes work and I was able to get a remote screen pulled up using adb and scrcpy. The phone still runs fine, cameras work, speakers work, battery life seems fine, etc. The big problem is that not only is the screen broken, it seems that I bent the frame a little too.
I don't have money to buy a brand new phone and I don't have any warranty so I'm in a position of needing to repair what I have. Does anyone have any suggestions for where I can get a new screen? Ideally I'd also like to buy a new frame so I don't have to try and bend my existing frame flat; I think it might break or the screen may not sit right if I don't do it perfectly. I've looked at a couple of places like Witrigs who actually sells a frame and screen assembly together, but I've read some bad stuff about them online and am afraid to go through with a purchase.
Also, I've noticed that OnePlus reduced the pricing on their in-house repair options recently so now it looks like it would be $160 + a $30 service charge so this might actually be the best option. I'm afraid though that once they get it they might have to replace the frame too and might charge a ton more or even decide to replace other components that aren't necessary.

The frame if distorted is probably toast. It's easier to replace both if they come as a unit.
If the service center it using OEM parts... go for it.
If you do it yourself follow full ESD protocols. The separate assemblies are very susceptible to ESD damage once out of circuit.

James.ptrsn said:
So a few weeks ago I was an idiot and crushed my OnePlus 8 in my trunk. I realized while I was closing it what was happening, so I was able to keep it from closing all the way and, surprisingly, the phone still works. Parts of the screen sometimes work and I was able to get a remote screen pulled up using adb and scrcpy. The phone still runs fine, cameras work, speakers work, battery life seems fine, etc. The big problem is that not only is the screen broken, it seems that I bent the frame a little too.
I don't have money to buy a brand new phone and I don't have any warranty so I'm in a position of needing to repair what I have. Does anyone have any suggestions for where I can get a new screen? Ideally I'd also like to buy a new frame so I don't have to try and bend my existing frame flat; I think it might break or the screen may not sit right if I don't do it perfectly. I've looked at a couple of places like Witrigs who actually sells a frame and screen assembly together, but I've read some bad stuff about them online and am afraid to go through with a purchase.
Also, I've noticed that OnePlus reduced the pricing on their in-house repair options recently so now it looks like it would be $160 + a $30 service charge so this might actually be the best option. I'm afraid though that once they get it they might have to replace the frame too and might charge a ton more or even decide to replace other components that aren't necessary.
Click to expand...
Click to collapse
It depends on where you live. If you are from the USA, I recommend iFixScreens. They Provide free diagnosis of your phone, give you estimate charges, and provide 180 days warranty.