Hi all,
I'm in desperate need of help. I put some Htc Home 2.1 software on my o2 Xda orbit 2 by mistake thinking it was some other piece of software.
Now my phone just locks up and hangs at the Windows mobile 6.1 green booting screen.
The htc software was just some theme type software for the home page, and i have not made any firmware changes since upgrading to 6.1 ages ago.
I've tried holding in the power button whilst pressing the soft reset button, but it doesn't seem to help.
Has anyone got any idea's as i'm desperate.
Rich.
if you cant get it to work then you may need to hard reset it...
To do this hold down the ok and windows button and reset the device at the bottom of it. All the time holding down the buttons then it will ask you i think press the power button to hard reset
NOTE: This will delete everything off your device and remove the sd card before just in case.
i would like to know if there is a way to restore HTC Snap to factory settings with original ROM, if the windows installed on it are curropted and mobile keeps on rebooting without loading windows. Hard Reset(pressing volume up key and then power buttom) will not do the job as my windows are curropted
Yes,
Hard reset:
http://forum.xda-developers.com/showpost.php?p=4529324&postcount=7
Step 1: Power down the phone. If your phone is already powered down, you may skip this step. Note: Removing the battery, while technically powering down the phone, is not the correct method to make the following steps work.
How can power down the phone? i didnt get that. i turn off the device and then press the VOLUME DOWN button and press the SEND button and the POWER button, no gray screen appears.
I need help in this matter please. I bought mobile from Dubai and now I am in Kuwait. I cannot goto the dealers here to get it fixed, because HTC Snap is not yet available in Kuwait, so there is no support for it.
I have tried:
[ROM] Official HTC Upgrade - Windows Mobile 6.5 (http://forum.xda-developers.com/showthread.php?t=570417)
and
[8-23-2009 HTC Snap Asia/WWE WM 6.1 (Unbranded) ROM 1.19.707.2] (OS ONLY) (http://forum.xda-developers.com/showthread.php?t=550863), but i cannot install them because my HTC Snap keeps on rebooting before the windows load. My computer doesnt recongnize the device, so there is no way to install these ROM's. i have tired hard reset too, but it didnt work
Guys,
I am really in a fix. It seems my HTC Diamond 2 is stuck at the first screen (all black with HTC written in grey). I cant access my phone book and the operations are extremely slow. I have tried doing the soft restart by pressing button next to the stylus. Please help. Also as yo may have guessed I am extremely basic in my knowledge of technical stuff so please try to keep it as basic as possible. Any Kind of Help will be appreciated.
I guess you could start off with taking out your battery... But I guess you already did that?
Same Issue
Hi, I'm having the same problem described above, but worse. I have an HTC Diamond 2. It stays at the logo screen (black screen with HTC letters in white). It doesn't pass anywhere from there. I've tried using the reset button on the back near stylus, tried the hard reset (Vol Up/Down + Power key) but it doesn't respond. There's an option that "works": If I press the 'call' key + power button, it shows an update menu with the following: 1. Update Logo 2. Update OS 3. Update Eboot 4. Format User Space 5. Return; none work except for the format user space option, but it does nothing.
I've tried also from the PC but it doesn't recognize the device via USB. I downloaded Active Sync, and an update wizard from HTC.com but still no success in recognizing the device.
Please help me, I need this phone to keep working, I don't know what triggered the problem..
Please help me guys . I tried to flash my phone. I conetcted the phone with active synch then on compiuter start the hard spl exe. Then i wait 2 minits and on my computer screen pop up new window and there write coz error 260. So then i dosconect the usb from pc , pick up the phone baterry wait 3 second then put battery to the phone but still doesn't response. I can push tur on button or reset button . But nothink!!!! please help what i need to do?
Before you flashed, you did make sure that you installed Microsoft .NET Framework 3.5 (mentioned in that same post)
Did any of the following happen?
*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver activate*
(any of these can lead to a bad flash and possibly brick your phone)
Click to expand...
Click to collapse
If so, then you have possibly bricked your phone, my friend
Also, did you wait for it to sync and can you enter bootloader? Hold the volume down key and press the power key/reset button and release the volume down key when you see the multi-color screen.
Additionally, you should be able to remove all cards and your battery and be able to get into bootloader mode by holding the volume down key and connecting to your computer.
R^7Z said:
Additionally, you should be able to remove all cards and your battery and be able to get into bootloader mode by holding the volume down key and connecting to your computer.
Click to expand...
Click to collapse
I tried now to do it i insrt usb to pc and pocket pc then hold volume down key. But nothing. Mayby you have skype i wna to comunicate with you faster. And maybe you can help to me wat can i do now. Thx for answering
How long did you hold the volume down key? I have to wait at least 2 - 3 seconds from when I connect the cable to my device as I have the USB cable already connected to my PC. In other words, hold the volume key down while you are doing all of this, till you see the multicolor screen.
i can hold it 3 or even 6 minits. but you say something about the colours. when i install the spl with synchronization my phone just like died. i dont know wats hapen. and now i dont see any colours on my phone screen. now the screen is black.when i put battery in my phone about after 3 hours my phone back a litle worm. i dont know what to do.
That sounds like you bricked it. Sorry to hear but if you are positive that you did everything as the post I linked you to, mentioned, then it should work. I'm not sure where the process stopped working for you but perhaps you can try retracing the steps? Although, it does sound like you missed a step and now you're phone is bricked. I'm also not sure if you understand what I am saying or asking you to do but I guess if it isn't working, it just isn't working?
Synchronized Well I just shook my phone and the program's EXE file in the SPL. and then there shook far, far away and then threw away so that you do not click anything, not combine any other program. I do and do it. I've been waiting for. Then I look at my phone screen and blacked everything. Then dropped onto a computer error 260th And I do not know what I can do. It does not RESPOND at all. Even though I tried hard reset but still nothing happens. Maybe I should try to flash the phone to make a micro sd? Once uploaded there y card and then pressing a few buttons to be there? Extend the writing maybe?
I'm not 100% sure this will work unless you have HARD-SPL flashed to your device; which is where we stalled out the last time.
Once you have the stock ROM, rename it to RAPHIMG.nbh. Copy just that file to the root of your microSD (preferably a FAT32 formatted microSD but not required). Then, remove the SIM and hold the volume down key while you press the reset button and continue to hold the volume down key till you see the onscreen instructions. According to THIS post, this method should work for flashing a ROM. I am am not able to really say for sure that it does as I never really used or had to use the microSD flashing option.
This doesn't work to maybe i can somehow reinstall the original htc touch pro soft?
The only OTHER way would be through USB from bootloader but if you find it difficult to get that far, I don't know how else to help you my friend.
Maybe you can write a detail lession how can i do this? how can i louch that bootloader . Please help i realy need your help
Try it this way exactly:
Remove your battery, SIM and microSD. Now plug your USB cable to your device (not the computer). Hold the volume key down and plug the other end of the USB cable to your computer and wait till the multicolor screen comes up. If you do not see the multicolor screen, this may be an indication that the USB cord may be messed up (try another in this case), it may be the USB port (try another in this case) OR worse case senario, your phone is just plain bricked my friend...
Additionally, you may need to try another computer.
Once you get into bootloader we will need to go ahead and get hard-spl onto your device.
First, let me know when you get to the bootloader screen...
This doesn't work to ;(((((((((
I don't know what to say, it is sounding more and more like you've bricked your phone. Have you tried another cable / another USB port / another computer?
So, which raphael do you have? CDMA or GSM? And which hard spl did you flash: CDMA or GSM? And did you flash the raphael hard spl, or did you do something like flash the diamond hard spl (or the unlocker)?
If soft resetting the phone doesn't bring it back, then it's probably bricked. I have a feeling you flashed the wrong bootloader for the device.
so if i bricked my phone. No i can just throw it to the dump. or maybe i i send this phone to the repair shop. Maybe they gona repair it?
So, what bootloader did you flash, and what model do you have? If it's the wrong combo, I guess you could sell it on ebay for spare parts. You're not likely to get it fixed.
i have t-mobile mda htc touch pro. and i tried to flash it with Raphael_VZW_HSPL_035
My friend, if you flashed that to your phone, your phone is now bricked from what I can tell. T-Mobile is GSM, that HSPL looks to belong to Verizon which is CDMA. I could be wrong but if you failed to read, then obviously you really didn't need to do it. :enter sad face of choice here:
It's dead. Just put it up for sale on ebay; someone may give you 20-50 bucks for it.
I just switched to ATT and got my One X not even a hour ago, I decided to root and then install some cleaning tool I found here.
Well after about 15 mins of adb pushing files it said device is out of memory or something in the dos window and then it closed, THEN the problem started, device rebooted and now when I power on I only get to the htc one screen with the beats audio logo at the bottom.
Problem is I don't even have clockwork installed yet so I can't even flash into something else. Can anyone PLEASE help me I would greatly appreciate it.
Sebrina said:
I just switched to ATT and got my One X not even a hour ago, I decided to root and then install some cleaning tool I found here.
Well after about 15 mins of adb pushing files it said device is out of memory or something in the dos window and then it closed, THEN the problem started, device rebooted and now when I power on I only get to the htc one screen with the beats audio logo at the bottom.
Problem is I don't even have clockwork installed yet so I can't even flash into something else. Can anyone PLEASE help me I would greatly appreciate it.
Click to expand...
Click to collapse
not sure what you did, but you should factory reset your phone to get it up and running. User Manual. Performing a factory reset using hardware buttons. If you can’t turn HTC One X on or access settings, you can still perform a factory reset by using the hardware buttons on HTC One X.
Press and hold the VOLUME DOWN button, and then press and hold the POWER button.
Wait for the screen with the three Android images to appear, and then release the POWER and VOLUME DOWN buttons.
Press VOLUME DOWN to select FACTORY RESET, and then press the POWER button.
hope this helps!