Hi,
I have a problem, feew days ago i upgrade my xda exec to new rom, i dont remember version, i delete installer.
Everything was gread, upgrade went smoothly.
Yesterday i'm playing music on my xda (WM Player ) and everything went down, i power up xda and it stand on Load screen O2.
I'm try to remove battery, try to format device pressing RESET and this two MINUS keys on top keyboard, its resseting to defaults try to reboot and still wait on o2 screen.
I don't have any idea what should i do.
I'm try to load this rom :
UNI 5.2.20931 G3/G4 FINAL VERSION by VNInt /w WinXP theme
but active sync don't recignize my device on this boot load screen.
The installer's says put device off usb cable, put reset and hold 2 minus keys, and this should show SERIAL : USB something like that, and then upgrade. But after when i press that, im getting reset factory defaults, not this about connection by USB or Serial.
zoom for instaled version:
and finally
why when i press reset and two minus keys im getting this:
i want to load this USB Cable sync white screen ?
Solved.
Press light, power and reset.
Then you go usb connection screen.
Close thread please
Dear Mods
This thread can be closed
Best,
Hi all,
I'm in desperate need of help. I put some Htc Home 2.1 software on my o2 Xda orbit 2 by mistake thinking it was some other piece of software.
Now my phone just locks up and hangs at the Windows mobile 6.1 green booting screen.
The htc software was just some theme type software for the home page, and i have not made any firmware changes since upgrading to 6.1 ages ago.
I've tried holding in the power button whilst pressing the soft reset button, but it doesn't seem to help.
Has anyone got any idea's as i'm desperate.
Rich.
if you cant get it to work then you may need to hard reset it...
To do this hold down the ok and windows button and reset the device at the bottom of it. All the time holding down the buttons then it will ask you i think press the power button to hard reset
NOTE: This will delete everything off your device and remove the sd card before just in case.
Hi,
I have changed the registry key to change the default keyboard input.
HKEY_CURRENT_USER\ControlPanel\Sip
After changing the registry key, I have restarted my mobile but it does not get start properly. It just shows the starting screen (only shows "Windows mobile" on screen). Please help me to solve the problem.
Mobile details :- HTC P3450
OS :- Windows moble 6.1
Thanks in advance,
Milind
looks like you need to hard-reset your device.
Please let me know how to hard reset the device.
-Milind
http://wiki.xda-developers.com/index.php?pagename=Elf_Resets
That's guessing you have an Elf HTC P3450 if not the WIKI will hold the info
Not Working.
Even after resetting it just shows the "Windows Mobile" on screen.
Is there any other way to edit the registry entry.
No way to change registry without being in operating system, my next advise is to go to the WIKI i linked and find your stock ROM and flash.
After a hard reset (soft reset won't solve your issue) it will sit at the Windows Mobile screen for a while as it initializes the system for the first time, so wait 15 or so minutes, and it should get around to setting up your stylus and such.
Hi, this happend to me once screwing around with sip, to get block recognizer back in wm6.5, and the all thing freezed just like you. So do operate hard reset and be patient it will end up telling you you really messed up but will start from scratch after a while.
hcall,trowakage
After hard reset I have Kept the device on for whole night but still it shows the "Windows mobile" on screen.
stylez,
It is not possible to connect the phone to PC through active sync, so it is not possible to flush the ROM.
-Milind.
weird, I suppose you tried pulling out the battery and putting it back on? what keys do you press to hard reset? do you get a message saying you will loose all your data press action to continue?
Can you enter hardspl at all? if so you can flash your rom
To perform a hard reset
1.Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.2.Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:This operation will delete all your personal data, and reset all settings to manufacturer default. Press Action to restore manufacturer default, or press other keys to cancel.
3.Release the TALK and END buttons, and then press ENTER on your device.
good luck
hcall,
I have tried it in the same way which you have mentioned.
In the same way shown in video
But unfortunately it doesn't show any message (hard reset might work after booting OS completely & in my case it is not possible, it just shows "Windows Mobile").
can you boot on hard spl at all?
hcall,
no.
power off...
press power button while the volume key is pressed down... that way you'll enter the tri-color boot screen... connect it to your computer and flash a good rom.
TheRem,
Not working.
Is there another way to reinstall OS.
-Milind
It seems there is no solution for this problem.
-Milind
bring it to the nearest HTC service center in your country.
Fiquei com a mesma dúvida.
A minha situação actual tem transcoding
Sent from my GT-I9100G using Tapatalk 2
Guys,
I am really in a fix. It seems my HTC Diamond 2 is stuck at the first screen (all black with HTC written in grey). I cant access my phone book and the operations are extremely slow. I have tried doing the soft restart by pressing button next to the stylus. Please help. Also as yo may have guessed I am extremely basic in my knowledge of technical stuff so please try to keep it as basic as possible. Any Kind of Help will be appreciated.
I guess you could start off with taking out your battery... But I guess you already did that?
Same Issue
Hi, I'm having the same problem described above, but worse. I have an HTC Diamond 2. It stays at the logo screen (black screen with HTC letters in white). It doesn't pass anywhere from there. I've tried using the reset button on the back near stylus, tried the hard reset (Vol Up/Down + Power key) but it doesn't respond. There's an option that "works": If I press the 'call' key + power button, it shows an update menu with the following: 1. Update Logo 2. Update OS 3. Update Eboot 4. Format User Space 5. Return; none work except for the format user space option, but it does nothing.
I've tried also from the PC but it doesn't recognize the device via USB. I downloaded Active Sync, and an update wizard from HTC.com but still no success in recognizing the device.
Please help me, I need this phone to keep working, I don't know what triggered the problem..
I wanted to help I am using a task29 with htc rom 2 Pro CDMA version 3.28.4.3 and I do not give this to install.
How do I solve this problem of white screen, and says one word and does not install HTC will be that there must be some software to install it.
One more note sync windows mobile can not read the usb device is not to give way to install.
I await your response thank you.
Is the white screen when Windows tries to load? Take the battery out, put it back in and hold the volume down button while pressing the power button. That should put you in bootloader mode and there you'll be able to task29