Hi,
I have a problem, feew days ago i upgrade my xda exec to new rom, i dont remember version, i delete installer.
Everything was gread, upgrade went smoothly.
Yesterday i'm playing music on my xda (WM Player ) and everything went down, i power up xda and it stand on Load screen O2.
I'm try to remove battery, try to format device pressing RESET and this two MINUS keys on top keyboard, its resseting to defaults try to reboot and still wait on o2 screen.
I don't have any idea what should i do.
I'm try to load this rom :
UNI 5.2.20931 G3/G4 FINAL VERSION by VNInt /w WinXP theme
but active sync don't recignize my device on this boot load screen.
The installer's says put device off usb cable, put reset and hold 2 minus keys, and this should show SERIAL : USB something like that, and then upgrade. But after when i press that, im getting reset factory defaults, not this about connection by USB or Serial.
zoom for instaled version:
and finally
why when i press reset and two minus keys im getting this:
i want to load this USB Cable sync white screen ?
Solved.
Press light, power and reset.
Then you go usb connection screen.
Close thread please
Dear Mods
This thread can be closed
Best,
Related
I flashed my XDA Exec with Leo's V7 Videocall ROM which all appeared to go fine until I performed the hard reset to reinstall.
It rebooted to the white screen asking you to press 0 to reinstall or X to exit, so I pressed 0. The screen briefly displayed a 'clearing' message and then went blank. There is no further response from the unit from any input except when I try to hard reset the device and reinstall again.
Just soft resetting the device only continues to give a blank screen and trying to power on the device in a normal manner also only gives a blank screen.
Windows XP fails to recognise the device when it is plugged in via USB either at the hard reset screen or soft reset or complete power off (remove battery, etc) then power on.
I updated to ActiveSync45 prior to the first hard reset.
Does anybody have suggestions or ideas on how to un-brick this Universal?
seems broken DOC chip. how many years you UNIVERSAL
It's about 18 months old now.
What is the DOC chip and why would it only fail at an upgrade?
Try a re-flash
Hi have you tried re-flashing the device?
Enter BootLoader mode, hold Power & BackLight button & press Reset, this will show Serial or USB on the screen. Start the flash off again or try another Rom (maybe the one you have is corrupt)
Cheers,
Beat
Hi Beast,
Yeah, I stumbled across these instructions today (http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen) and will give that a go tonight when I get home.
Thanks for the suggestion - I'll report back once I've tried it.
jamver - did you charge before flashing your new BIOS? it can go blank just because the battery could be dying and despite seeing some charge in the indicator, in fact the batt would be exhausted.
Hi jamver, I also encountered the same issue as you a few months back. Symptoms sound similar. I tried the points described in this thread:
http://forum.xda-developers.com/showthread.php?t=289325
Also, upgraded my bootloader and the device came back to life. One thing I learned also is that not all USB cables are made the same. If you find one USB cable doesn't work, you may want to try another. (my case, using a poor quality cable resulted in the "serial" word on the screen not changing to "USB")
Good luck and all the best!
Fixed
Thanks for the help guys. Manually putting it into bootloader mode and re-flashing it worked.
WM6 is significantly faster than any image of WM5 I've used!
hello,
i've ever meet this problem.. but after reflashing in bootloader mode all restart pefect !
i flashed my phone wit the above rom couple weeks ago...now it lags at the 3rd bootscreen(windows mobile 6)...it wont go past this screen.. i press the lil button next to the IR port but still no help....PLEASE HELP
Edit/Delete Message
Just put your phone in bootloader mode then flash back to the rom that your device was originally shipped with.
Maybe you have installed some software that crashed the OS, try to hard reset your Wizard and start it over by punching the reset hole while holding CommManager and VoiceDial buttons.
So, I have an SDA (unlocked and all) and decided to upgrade to WM 6.1 using Karhoes guide. Everything went smooth and before you know my SDA had a new lease on life. Well, I continued reading on the forums about other WM 6.1 roms and decided that I wanted to get GnatGoSplat's WM 6.1 clean rom. (http://forum.xda-developers.com/showthread.php?t=380554) and this is where all Hell broke loose. I followed the directions and the SDA got stuck on a white screen forever (before I was ever able to run the ROM flash upgrade). So, I took the battery out, bad move I suppose and again I was greeted by the white screen. However, I was able to get into the bootloader so I ran TeraTermPro and did the format BINFS command. At this point things are looking good. Now I get back to the bootloader and I can see the USB connection in the bottom left hand corner and I can hear it connecting to the PC but ActiveSync won't detect it. No biggie, but when I try to do the ROM install I get a connection error. And this is where I am stuck. Can anyone help??? I find it odd that the PC and the phone can connect but I can't update or restore the phone. Help!! TIA.
I had same problem, here is the trick fist step take off the battery and wait for 5 min. second step put the battery back and than press power button at the same time insert the mini usb cable and start pressing the button on left hand corner next to home buttom . try several time , good luck
Is this taking me into the bootloader?
press power button and than wait 1 or 2 second then insert the min usb while the phone boots up to bootloader then keep pressing left hand corner button make sure the usb cable is conected to computer
...and reinstall activesync and check allow usb conection to activesync pictogram.
Hi, I am STUCK!! My phone (HTC Touch Pro) gets stuck in the soft reset mode. I was able to get it to the tri-color screen, but could not get any further than that. Tried to follow some directions by going through the connections and settings, but it could not find the usb port. I need help, if you could get me past this so I could reset my phone, that would be great!!! I am brand new at this and know nothing. Thanks, Nikki
My red screen says:
RAPH800
SPL-0.36.0000
MicroP-Hermann (LED) v0C85
Green screen says:
MicroP-Hermann (KEY) v0685
PSOC-Raph STAGE_EVT v20
Nothing is in the blue screen
Thanks for any help!!!
try to hard reset it, check it here http://forum.xda-developers.com/showthread.php?p=2643414 or http://forum.xda-developers.com/showthread.php?p=2525584
for more informations, visit the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael
HTH
Have you flashed anything to it? I'm not that familiar with cdma devices. If the hard reset doesn't work, then try taking the battery out for a while, then putting it back in and hitting the power button. If nothing works, and you haven't done any flashing, just take it back for an exchange.
how to run rom when HTC pro is frozen, won't boot or cuts on n off
--------------------------------------------------------------------------------
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
i would like to know if there is a way to restore HTC Snap to factory settings with original ROM, if the windows installed on it are curropted and mobile keeps on rebooting without loading windows. Hard Reset(pressing volume up key and then power buttom) will not do the job as my windows are curropted
Yes,
Hard reset:
http://forum.xda-developers.com/showpost.php?p=4529324&postcount=7
Step 1: Power down the phone. If your phone is already powered down, you may skip this step. Note: Removing the battery, while technically powering down the phone, is not the correct method to make the following steps work.
How can power down the phone? i didnt get that. i turn off the device and then press the VOLUME DOWN button and press the SEND button and the POWER button, no gray screen appears.
I need help in this matter please. I bought mobile from Dubai and now I am in Kuwait. I cannot goto the dealers here to get it fixed, because HTC Snap is not yet available in Kuwait, so there is no support for it.
I have tried:
[ROM] Official HTC Upgrade - Windows Mobile 6.5 (http://forum.xda-developers.com/showthread.php?t=570417)
and
[8-23-2009 HTC Snap Asia/WWE WM 6.1 (Unbranded) ROM 1.19.707.2] (OS ONLY) (http://forum.xda-developers.com/showthread.php?t=550863), but i cannot install them because my HTC Snap keeps on rebooting before the windows load. My computer doesnt recongnize the device, so there is no way to install these ROM's. i have tired hard reset too, but it didnt work