Please help me guys . I tried to flash my phone. I conetcted the phone with active synch then on compiuter start the hard spl exe. Then i wait 2 minits and on my computer screen pop up new window and there write coz error 260. So then i dosconect the usb from pc , pick up the phone baterry wait 3 second then put battery to the phone but still doesn't response. I can push tur on button or reset button . But nothink!!!! please help what i need to do?
Before you flashed, you did make sure that you installed Microsoft .NET Framework 3.5 (mentioned in that same post)
Did any of the following happen?
*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver activate*
(any of these can lead to a bad flash and possibly brick your phone)
Click to expand...
Click to collapse
If so, then you have possibly bricked your phone, my friend
Also, did you wait for it to sync and can you enter bootloader? Hold the volume down key and press the power key/reset button and release the volume down key when you see the multi-color screen.
Additionally, you should be able to remove all cards and your battery and be able to get into bootloader mode by holding the volume down key and connecting to your computer.
R^7Z said:
Additionally, you should be able to remove all cards and your battery and be able to get into bootloader mode by holding the volume down key and connecting to your computer.
Click to expand...
Click to collapse
I tried now to do it i insrt usb to pc and pocket pc then hold volume down key. But nothing. Mayby you have skype i wna to comunicate with you faster. And maybe you can help to me wat can i do now. Thx for answering
How long did you hold the volume down key? I have to wait at least 2 - 3 seconds from when I connect the cable to my device as I have the USB cable already connected to my PC. In other words, hold the volume key down while you are doing all of this, till you see the multicolor screen.
i can hold it 3 or even 6 minits. but you say something about the colours. when i install the spl with synchronization my phone just like died. i dont know wats hapen. and now i dont see any colours on my phone screen. now the screen is black.when i put battery in my phone about after 3 hours my phone back a litle worm. i dont know what to do.
That sounds like you bricked it. Sorry to hear but if you are positive that you did everything as the post I linked you to, mentioned, then it should work. I'm not sure where the process stopped working for you but perhaps you can try retracing the steps? Although, it does sound like you missed a step and now you're phone is bricked. I'm also not sure if you understand what I am saying or asking you to do but I guess if it isn't working, it just isn't working?
Synchronized Well I just shook my phone and the program's EXE file in the SPL. and then there shook far, far away and then threw away so that you do not click anything, not combine any other program. I do and do it. I've been waiting for. Then I look at my phone screen and blacked everything. Then dropped onto a computer error 260th And I do not know what I can do. It does not RESPOND at all. Even though I tried hard reset but still nothing happens. Maybe I should try to flash the phone to make a micro sd? Once uploaded there y card and then pressing a few buttons to be there? Extend the writing maybe?
I'm not 100% sure this will work unless you have HARD-SPL flashed to your device; which is where we stalled out the last time.
Once you have the stock ROM, rename it to RAPHIMG.nbh. Copy just that file to the root of your microSD (preferably a FAT32 formatted microSD but not required). Then, remove the SIM and hold the volume down key while you press the reset button and continue to hold the volume down key till you see the onscreen instructions. According to THIS post, this method should work for flashing a ROM. I am am not able to really say for sure that it does as I never really used or had to use the microSD flashing option.
This doesn't work to maybe i can somehow reinstall the original htc touch pro soft?
The only OTHER way would be through USB from bootloader but if you find it difficult to get that far, I don't know how else to help you my friend.
Maybe you can write a detail lession how can i do this? how can i louch that bootloader . Please help i realy need your help
Try it this way exactly:
Remove your battery, SIM and microSD. Now plug your USB cable to your device (not the computer). Hold the volume key down and plug the other end of the USB cable to your computer and wait till the multicolor screen comes up. If you do not see the multicolor screen, this may be an indication that the USB cord may be messed up (try another in this case), it may be the USB port (try another in this case) OR worse case senario, your phone is just plain bricked my friend...
Additionally, you may need to try another computer.
Once you get into bootloader we will need to go ahead and get hard-spl onto your device.
First, let me know when you get to the bootloader screen...
This doesn't work to ;(((((((((
I don't know what to say, it is sounding more and more like you've bricked your phone. Have you tried another cable / another USB port / another computer?
So, which raphael do you have? CDMA or GSM? And which hard spl did you flash: CDMA or GSM? And did you flash the raphael hard spl, or did you do something like flash the diamond hard spl (or the unlocker)?
If soft resetting the phone doesn't bring it back, then it's probably bricked. I have a feeling you flashed the wrong bootloader for the device.
so if i bricked my phone. No i can just throw it to the dump. or maybe i i send this phone to the repair shop. Maybe they gona repair it?
So, what bootloader did you flash, and what model do you have? If it's the wrong combo, I guess you could sell it on ebay for spare parts. You're not likely to get it fixed.
i have t-mobile mda htc touch pro. and i tried to flash it with Raphael_VZW_HSPL_035
My friend, if you flashed that to your phone, your phone is now bricked from what I can tell. T-Mobile is GSM, that HSPL looks to belong to Verizon which is CDMA. I could be wrong but if you failed to read, then obviously you really didn't need to do it. :enter sad face of choice here:
It's dead. Just put it up for sale on ebay; someone may give you 20-50 bucks for it.
Related
Hi,
I have installed ~2 weeks ago NBD 7.9 and everything was ok. Today I have restarted my phone to change my SIM card but my phone could not start.
I see HTC logo but phone freezes after having NBD logo and nothing happens.
As you can image because of could not connecting to the phone, I can not also update ROM.
Any tip to recover my phone?
Did you try a hard-reset?
Can you explain what exactly you mean? Probably I do not know what is hard reset on these devices.
Ok I have found hard reset on the page
http://wiki.xda-developers.com/index.php?pagename=WizardFAQ
But now there is no power also. I also could not boot anymore.
* Press and hold both the Comm Mannager Button and the Voice Command Button
* While keeping those two buttons pressed, press the Reset Button with your stylus
* After about a second you will be prompted for confirmation. Press the Talk Button to confirm
----
oh I see, you found it.
the hard reset set your phone to the "original state" of the ROM (in that case right after you installed your NDB rom).
what do you mean there is no power?
Could it be your battery is empty and needs to re-charged?
There is no response on the phone now.
I suspect battery is empty but when I try to connect power cord no response also.
If you are sure your battery is not empty try to get into the bootloader mode:
depending on the type (G3 or G4) follow the instructions:
http://forum.xda-developers.com/showthread.php?t=298613
especially step G3.2 or G4.2 respectively.
tarantor said:
There is no response on the phone now.
I suspect battery is empty but when I try to connect power cord no response also.
Click to expand...
Click to collapse
When I tried to connect to power while the phone is off it takes some seconds before response. Have try.
I have a G3 device (Vodafone VPA II Compact). But there is still no response.
I think it is power issue now. The bad thing is that I have only USB cable at home and the main power charger at work now.
Are there any way to charge with USB cable when phone is not open?
I would suggest following:
1. ensure your battery is full
2. do the hard-reset again - this may solve your problem already
3. if not, try to get into the bootloader mode (see the thread referred to above for instructions)
4. follow the instructions to re-load the ROM
tarantor said:
I have a G3 device (Vodafone VPA II Compact). But there is still no response.
I think it is power issue now. The bad thing is that I have only USB cable at home and the main power charger at work now.
Are there any way to charge with USB cable when phone is not open?
Click to expand...
Click to collapse
I just tried ... while your phone is off the USB connection to the PC should provide you the current .. at my case the WIZARD starts to charge .. have a try.
----------------
the red LED light on the right above the display indicates the charging .. and turns green once it is fully charged, so in any case, you should see a light, although it takes 3-5 seconds after connecting to the USB.
Does it work?
I have tried and there is no light. As I remember before it was not possible if you are not connected via ActiveSync.
Anyway, I can try Monday at office.
Thanks for your help!!!
You're welcome. Good luck for Monday. Hope it will work out. Not much help yet from me but I will be around here.
This was driving me mad as well. I had to put it into bootloader mode (holding camera while resetting) and flash back to the Tmob 2.26 and then reflashing nbd.
The trick is to disable the HTC home plugin before you install any other apps. From what I understand its to do with some mysterious dlls.
I found this out on Friday and so far I haven't had any problems but I guess its still early days.
Good luck!
OK. It was a power issue and I could make a hard reset at office and it works again now.
I will try NBD 8.1 and see the difference.
Thanks for your help a lot!
good to hear it is working again!
Pls How Repair Treo 750v Dead?
How To Put It In Bootloader Mode May I Flash It?
What do you mean dead? What have you done with it?
Format miniSD into FAT32, put ROM image on it (card method for update, described maaaany times here) and reset holding PTT/Media (side, under volume rocker) button.
Often it is good idea t take a look at wiki. You can find there something like this: http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_Upgrade
After getting your Treo back to life, write what have you done to it to kill it - it could be useful in future.
I Recevet It Dead
miloszz said:
What do you mean dead? What have you done with it?
Format miniSD into FAT32, put ROM image on it (card method for update, described maaaany times here) and reset holding PTT/Media (side, under volume rocker) button.
Often it is good idea t take a look at wiki. You can find there something like this: http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_Upgrade
After getting your Treo back to life, write what have you done to it to kill it - it could be useful in future.
Click to expand...
Click to collapse
DOUBT MAY IT NEED TO FLASH NOW ,PLS HOW TO PUT MANUALY IN BOOTLOADER?
bebiloku said:
DOUBT MAY IT NEED TO FLASH NOW ,PLS HOW TO PUT MANUALY IN BOOTLOADER?
Click to expand...
Click to collapse
Step 3. Enter the bootloader. To do so, press the Push-to-talk / Media button on the left side of the device, then push the reset pin with your stylus.
WHICH IS THE RESET PIN ?
bebiloku said:
WHICH IS THE RESET PIN ?
Click to expand...
Click to collapse
The small hole signed "RESET" uder the miniSD card slot.
7. Holding PPT/Media button (one under volume keys) push reset (under card slot) with stylus. - this is going into bootloader.
Still you haven't told us what do you mean saying "dead" and what was the reason of this sudden death. Flashing is a good way to put it on two legs (if it is dead, probably the rom image is broken somehow, so reflashing will fix it).
And make sure your battery is fully charged. Btw, does it charge when you plug in to charger?
miloszz said:
The small hole signed "RESET" uder the miniSD card slot.
7. Holding PPT/Media button (one under volume keys) push reset (under card slot) with stylus. - this is going into bootloader.
Still you haven't told us what do you mean saying "dead" and what was the reason of this sudden death. Flashing is a good way to put it on two legs (if it is dead, probably the rom image is broken somehow, so reflashing will fix it).
And make sure your battery is fully charged. Btw, does it charge when you plug in to charger?
Click to expand...
Click to collapse
if my treo 750v doesn't charge when i plug into the charger what should i do? thx
Hi all... and sorry for my bad English ;-)
I've got an HTC G1. When I try to start it, nothing happens. Only the backlight turns on ... What can I do?
do you have a rooted g1 with recovery and engineering SPL?
No, it isn't rooted...
Is it brand new? I think you should be able to exchange it, if you got it from a store that is; unless you got it from online then you will have to contact the website and see where that goes.
No, it isn't brand new. Someone gave it to me... So i can't exchange it.
Try to boot it thru camera+power holding. Wont help you if success but at least will tell you where the problem.
if he can go to recover mode screen wont remain completely black as far as i know. Because splashscreen appear before recover (or other) mode starts. I might be wrong of course.
If I try to go into the recovery mode thru camera + power button, nothing happens. Only the backlight turns on (black screen with backlight & keyboard backlight...)
Follow first 6 steps in this form...
http://forum.xda-developers.com/showthread.php?t=442480
tihs should boot your G1.... then if you want go on ahead with other rooting steps to root your g1..
I tried the first 6 steps, but it won't work. I think I can't entry bootloader mode. On step #4 (...)You should see a gray/white screen with instructions(...)
nothing happens on my Phone. :S
Isn't it possible, to flash the bootloader/firmware over USB or something like that?
*push* no solution?
are you sure the phone does not boot? Does it rumble when you first turn it on?
I have a similar problemb, but my phone will completely boot and work, but the lcd does not work it stays black. i can move apps around (they rumble when you pick one up), and i can recieve calls.
I was able to get it to occasionally boot with the lcd working by rebooting the phone with call+menu+power. It worked long enough to reflash the rom to rc29, and boot into it. Then it died shortly after.
mine is going to htc.
Yes, it does rumble when I turn it on, but I think it doesn't boot. So I can't "move apps around" or "recieve calls"
And I can't use the warranty, because I'm swiss.
another way to tell if it actually boots is plug it into a pc after giviing it enough time to boot, and listen for the usb connection notification sound your phone should make.
just trying to help you narrow it down. When i am contacted by HTC i will be sure to try and get as much info from then as possible. hopefully ill get something that might help you.
Since you wont have to worry about voiding your warranty, I also suggest snagging the factory service manual and make sure all the flex cables/connectors pertaining to the lcd are properly connected. This, of course, is under the idea that you have the same problem as me.
good luck
When I plug the phone over usb into a PC, the pc find it as "HTC Android Phone USB Device".
Hmm I don't think, that the LCD is broken, because the backlight turns on... If the lcd is broken, the backlight won't turn on, right?
the backlight on mine would also stay on. then again my lcd worked intermittenly at first and proceded to work less and less, but the backlight would remain on. However, I think your problem differs from what I encountered.
The fact that your pc recognizes the phone means the usb controller is working, but thats about it... I am just trying to find out for sure if you phone boots or not. That will help narrow down the problem for sure.
Have you tried calling it from another number?
It also never hurts to take a peek at the factory service manual... if you havent already
thank you. hmm... I think I can't recieve phonecalls.. but I'm not sure. (I tried it, but yeah i don't know. xD it doesn't rumble or something like that...) Is it possible to have "remote" on the phone? So I can use it over the PC?
They have shipped my phone back. Apparently the screen dying was a side effect of the keyboard going bad...The keypad did not give me any problems though. I was told they replaced the keypad FPC (part no: 73H20137-41M, pg#102 in the service manual). They replaced nothing else.
Unforutnately they did not have any more info to give me. In your case, i would suggest opening it up and checking all the flex cable connections to ensure they are properly and fully attached. of course this check is not really for the faint of heart technically speaking, but it shouldnt be too bad with the service manual as a disassembly/assembly guide.
are there any tutorials how to open the g1? =)
http://www.youtube.com/watch?v=27inpgouXII (part I)
http://www.youtube.com/watch?v=HIg_3EgrgGY (part II)
Tmobile Wing Won't turn on after Rom update attempt. No reset workers. Can't charge can't do anything, its just dead. I really don't want to wait until the wing 2 comes out, is there anything i am doing wrong?? I guess i should add that i used hypercore
It turns out that i think something when wrong( i don't see why?) but i put it into bootloader thing(camera + reset)
Wrong Section to post in. Also your phone is probably bricked.
Go to the xda wiki and search for Goldcard. Even if it's for the elf, it was copied from the Herald. I haven't tried it myself, though.
just hold down the camera button and press the reset button on the side
then connect usb cable
then download the official stock t-mobile rom (google it)
and it should work again
Rim1Flex said:
Tmobile Wing Won't turn on after Rom update attempt. No reset workers. Can't charge can't do anything, its just dead. I really don't want to wait until the wing 2 comes out, is there anything i am doing wrong?? I guess i should add that i used hypercore
Click to expand...
Click to collapse
turn on in bootloader mode
(camera+reset button on side below the volume)
then download the official stock rom and run it and you should have ur old rom back
just search on google for t-mobile stock rom
Another brick
I was installing the customized ROM from thewingster (WM6.5) on my Wing. I did not include MS voice recognition, and I think I included all the other software. The progress bar was humming along on my wing, then the flash program said that the file was corrupt, and my phone went blank.
Now I cant turn it on, it wont light up at all when I plug in a charger or a computer USB (activesync wont notice anything is attached to the computer, and wont turn on at all). I tried a charged up battery from another wing, nothing changed...
I tried hard resets with the soft keys and reset button, and camera and reset button. Cant access it through my computer using any program (herald-uspl or activsync)
I have nothing at all.
Any ideas other than throwing it off a bridge?
routine8 said:
I was installing the customized ROM from thewingster (WM6.5) on my Wing. I did not include MS voice recognition, and I think I included all the other software. The progress bar was humming along on my wing, then the flash program said that the file was corrupt, and my phone went blank.
Now I cant turn it on, it wont light up at all when I plug in a charger or a computer USB (activesync wont notice anything is attached to the computer, and wont turn on at all). I tried a charged up battery from another wing, nothing changed...
I tried hard resets with the soft keys and reset button, and camera and reset button. Cant access it through my computer using any program (herald-uspl or activsync)
I have nothing at all.
Any ideas other than throwing it off a bridge?
Click to expand...
Click to collapse
You tried pressing the camera button ONLY while pressing the power button? (or the soft reset button.) The ROMs don't stop the phone from turning on unless the installation was botched.
botched install
ivanmmj said:
You tried pressing the camera button ONLY while pressing the power button? (or the soft reset button.) The ROMs don't stop the phone from turning on unless the installation was botched.
Click to expand...
Click to collapse
Yes my install was botched. Computer went into standby mode during flash. Phone was still on (just in the bootloader mode? with 3 colors on the screen). From there I figured I could just re-install the ROM, so I tried. Then the progress bar appeared on my phone and I figured it was all gravy. Then the ROM flasher program on my computer said the file is corrupt and the phone went black.
Now its totally dead wont respond to any combination of button pushes or battery replacements....
Anyone had this problem before?
What does this have to do with Rom development?
routine8 said:
Yes my install was botched. Computer went into standby mode during flash. Phone was still on (just in the bootloader mode? with 3 colors on the screen). From there I figured I could just re-install the ROM, so I tried. Then the progress bar appeared on my phone and I figured it was all gravy. Then the ROM flasher program on my computer said the file is corrupt and the phone went black.
Now its totally dead wont respond to any combination of button pushes or battery replacements....
Anyone had this problem before?
Click to expand...
Click to collapse
If it won't turn on by holding the camera button and then pressing the power button nor the reset button, then it might be gone. Sorry. Although, I've always seen it be recoverable.
help me please i have a unlocked sprint touch pro 2 i flashed a gps rom fix
and now my phone wont turn on i tryed a hard reset and nothing
you see anything on the screen at all?
Tell something moore, what's happening when you try to turn it on, or when you plug usb cable, did you flash HardSpl first?
yea nothing completely dead charge light comes on thats it. its unlocked and have energy rom on it i think i flashed a gsm gps fix and bam bricked.
Easy fix
I did this on Wednesday (flashed the wrong type of ROM onto my Verizon phone).
After a little panic, I found the solution. Take the battery out of the phone, put it back in, and hold down "Volume Down" and "End" (power on) at the same time. The phone boots to its "bootloader" - a screen with two or three color backgrounds that looks sort of like an old school bios screen.
From there, you can connect the USB cable to your PC, and load an appropriate ROM (I used MightyRom because I had trouble finding the EnergyROM for Verizon).
Did you get this figured out?
Did you get this figured out?
Here is how I UN-bricked my Sprint phone..
By the way...I got this from some one else at this site. It worked (sorry I can't give the proper credit who wrote it first)
Copy the file "RHODIMG.nbh" to a memory stick formated at fat32, put it in the phone. (it should be in the directory where your initial ROM install file is on you Windows computer)
1. Phone off (pull the battery)
2. Pressed the power and Volume Down button simultaneously
3. Power on while doing step 2 (I inserted the battery and then did this step)
4. Load ROM by pressing power again
5. Note bootup will be extremely slow, wait for red text, then wait even longer for GUI
6. I waited on screen for a couple of minutes (at least)