Database Info

phone HATES my SIM CARD "unregistured sim"

My phone HATES my SIM CARD, First off i rooted my phone, its fully unlocked and has been just fine for over a month. I'm using FIDO but its an unlocked Rogers phone. (SGH-I727R model) and original FW and everything. made a couple of phone calls in the morning and the when i got home i noticed that my phone displayed "unregistured SIM" so i tried reloading sim card, reboot and so on over and over again. and it didnt work. so put the sim card in my 4year old phone, and it worked.
try calling fido aswell as rogers.. they said, sim card might be old and there is a conflict with the NEW phone. so i went to futureshop talked with the dude got the NEW sim card and tested it out with no success. again tried it with old phone, WORKS..
now you think maybe the phone might be locked somehow... NOPE. i even tried dude's sim card and he is on another network. (NOT rogers or fido) WORKED with his sim, proof my phone is totally unlocked to any carrier.
NEW SIM Card Doesnt work with my phone but worked perfectly with buddies SIM CARD on another carrier?!?!... lol
and now it shows "no service"
PLEASE HELP.

Update
i have just formatted, cleared cache and factory reset and it still says the same ****. no service... anyone help? i'm dead in the water here..

I had the same problem, I had to switch carriers then my phone started working properly, Honestly I think its the company...

Update
well, it looks like i hit rock bottom. i even installed the new ics rom and its still doesn't take my SIM card. I'm pissed. i need to dump this phone and get a working one. I can't switch over to rogers, I hate them. and when i go on vacation this phone will be a brick if i cant insert everyone elses sim cards around the world.
and i dont think its the company's fault. i have a feeling its because its rooted or something along those lines.
maybe i will wait for the new galaxy sIII and dump this ****. $$560 wasted. i feel soo stupid for getting this phone.

hi,
What have you used to unlock sgh-i727? I have one and need to unlock it so can switch to other provider then ATT.

when i bought the phone it came unlocked. you must goto a website and give them your imei # that is on your phone. and they will sned you a unlock code upto 2 hours later.. DONT try and guess the code. and you will have to pay a fee but it will be minimal. $3-10
Final UPDATE, i went to rogers and got the phone on a contract for $50 and now i think i will give this to my mother to use for pics and ****. i have not a clue what to do with this thing.

And now it works
How reliable is that, i went out and bought a second phone from rogers and after a couple of days of my old phone not working with any sim card, Now it works with both rogers and Fido. Now i am stuck in a 3yr contract and have 2 of these phones. anyways i will try and get rid of my stupid contract. its only been a couple of days and "buyers remorse" law states that you can get out of any contract within 15 days of when the contract was signed.

Same Here
Strange - I had the EXACT same thing happen to me as well. Funny thing is it happened the same day as your first post about this issue on Jan. 25. I am on FIDO as well and had a working, unlocked i727R I bought off eBay from Basatne Electronics.
It was unrooted and working perfectly for a month and a half. All of a sudden I got ‘no service’ and sometimes ‘unregistered sim’ when I rebooted. I tried 6 different sim cards from FIDO and Rogers that worked on other phones and same thing. I cleared cache and did a reset. Same thing. I brought it to FIDO and Rogers and tried their demo sim cards in it. Same thing.
Finally I called Samsung to sent it back to them for ‘repair’. They sent me a UPS label and I sent it to Service Absolut, Samsung’s repair subcontractor in Montreal. It was there for over a week now. Their communication is terrible – it just says ‘open’ or ‘close’ on Samsung’s tracking website, so I called Absolut themselves yesterday asking for the status/tracking number. They said they were going to ship it yesterday even though my repair ticket online said ‘close’ since last wednesday.
I find this really strange, especially since your phone seems to have done the same thing as mine right around the same time. I figure it was Rogers/Fido that messed up their network somehow. Two working Rogers sims didn’t work in it either. My sim card was working on my old blackberry still. My IMEI didn’t appear in any blocked IMEI lists I looked up.
I just got my phone back today 10 minutes ago and it works again. It says 'full software upgrade and reset' on the repair list I got back, although I didn't mod my phone in the first place. At least I had my backup blackberry. Still pisses me off – I spent hours trying to figure out what was wrong with it and I wiped all my apps when I did a reset, so I’ll have to load them all up again and set up my phone.
Just weird.

And Again...
Well, it seems it just happened again.
After a month and a week or two of working perfectly (same length of time as last time), my i727R now says 'No Service' again for some reason on FIDO network and won't connect to anything except through Wifi.
I didn't install any new software or change any settings when it happened.
It was working one minute, put it in my pocket and a couple minutes later it says 'No Service', even though I have always had service before in the area I am in right now.
Does anyone have a clue what can be causing this?
Network, Software (some kind of timer somewhere that would shut off connection), Malware?
This is driving me nuts - I don't want to have to send it back to Samsung again.
Last time Samsung said they reflashed the software when I sent it back.
I don't know why I would need to do that since it was working just fine and I wasn't messing around with any settings before it started saying 'No Service' - same thing happened last time.

Cricket Activation Question

Hi,
I have a verizon lg Spectrum vs920 that I would like to use on android $55.00 cricket plan. I just recently got it flashed by a professional via remote flash. Everything seems fine on the phone. Checked the settings a million time. I am not a complete noob at flashing as I have done a lot of phones before. But my experience stops at Motorola Razr days. I haven't been in touch with the flashing market since than. I tried to do the phone myself but realized how far those phones has come.
Anyway, I tried to do a esn change but the phone itself has only IMEI number and cricket has to have MEID number. I tried to do a conversion using a ESN converter but initially I didn't get any result. So, I did the conversion with out the last number of the IMEI (read it somewhere, don't remember right now). I gave the Cricket rep the conversion result, they put it in to the system but the phone didn't work. So, I called back and talk to their tech support. According to them, phone won't work because it has a Sim card in it.
My questions to you guys is,
Has anyone actually ever used this phone with cricket service?
Can it be used with the Sim card in it?
As this phone won't dial *228 and you can not access the service menu, how do you activate this phone?
What exactly should I give the cricket rep when I call the next time.
I noticed the flash didn't set any sid,Nid number, could that be the problem?
I hate to spend another 15.00 and not get the phone going. Please let me know as much as you can about the activation process while I do a little more checking on the settings to see the problem could have been with the phone and not the activation process.
Thanks in advance.

d2vzw: Unflash from PagePlus procedure

Starting this October, PagePlus is offering 4G/LTE. Initially, I was assuming that all I need to do is plug in an LTE SIM card and activate account, and all will be peachy. However, it seems that by flashing phone to pageplus when it looks like a 3g device, I have messed up some radio settings, and verizon provisioning doesn't work, phone repeatedly keeps trying to call *228. Contrary to that, the other S3, which I didn't flash does not call at all, but instead pops up message box stating that the phone is being programmed, and after a couple minutes it's online . I do not remember what exactly did I program, it was awhile ago . Pageplus support knows that problem, and they are advising anybody who wants to go LTE to bring up an unflashed phone, saying the flashed one won't work
There are folks on kitty forums who offer remote de-flashing for 30 bucks, but no description what actually they do. Does anyone know what the process is? I can get my phone into QPST/DFS. Anyone knows what to do next?
UPDATE: see post #3 for solution

Can't help you with deflashing, but I will tell you that my local page plus vendor did mine for free and it only took him about 5-10 minutes. Maybe yours would do the same. Just a thought.
Sent from my SCH-I535 using Tapatalk

I guess it indeed is simple once you get to QPST mode. I used DFS to program, and the only setting I had to change was RuimConfig = RuimOnly (from NV_ONLY), see screenshot attached. Did not work on 4.0 firmware which I tried to use first, but worked fine on 4.2.1 and 4.1.2.

I got a sim card for my phone. All I did was verify that my phone was on RuimOnly (it already was), then I contacted PagePlus to activate my simcard (you're supposed to do this before you put it in your phone, they say) and they remotely programmed the phone, everything went smoothly. I have 4g data now, no "unflashing" required. Pretty easy. :good:

You put it on your phone before, you want this set up, then you can use the phone, so no problem.

Confirmed
I can confirm this works. I switched 2 samsung galaxy note 2 SCH-i605 from 3g to 4g.
The phones were originally flashed over to pageplus using wireless workshop. This puts them on pageplus as 3g phones. They drop the last digit of the MEID so it is a 14 digit code (3g) instead of 15 digit for 4G.
Here's what I did to get 4G LTE working.
Ordered a pageplus SIM card from pageplus
put the simcard in the phone
Used DFS to change RUIM from NV_Only to RUIM_only
Contacted Pageplus on chat and had them change my phone from 3g to 4g. I'm not sure exactly what they did, but I gave them the 15 digit MEID and the SIM ICCID (printed on the sim card you get, or look in settings, about device, details or something like that, you know where to look. ) The customer service rep said that what you need to tell them is you want to change a 3g phone to 4g. I told them it was back to standard firmware just to make them happy. It seems the RUIM changes is all you need.
Voila! Reboot the phone, give it a minute - it connects to 4G and then disconnects and looks like it has failed, but give it a minute and it comes up with 4G LTE and speedtest.net confirms it is blazing fast.
Loving it!
This is only required for a verizon phone that has been flashed in the past to make 3g work on Pageplus. Not needed on contract phones from verizon that are originally 4g.
Happy downloading!

galets said:
I guess it indeed is simple once you get to QPST mode. I used DFS to program, and the only setting I had to change was RuimConfig = RuimOnly (from NV_ONLY), see screenshot attached. Did not work on 4.0 firmware which I tried to use first, but worked fine on 4.2.1 and 4.1.2.[/QUOTE I did that but i do not have 4g and imwe in a 4g coverage area. using a mxx xt912. any help is appreciated
Click to expand...
Click to collapse

Gift for a friend
hi everyone,
I have a few questions based on my circumstances. I just deactivated a S3 Verizon from PagePlus which was flashed to 3g. I would like to hand my phone off to a friend as he's running a Droid X (!).
1. From what I understand to "unflash" I need to use DFS (cdmatool.com) and set Ruim config to RuimOnly. However, I believe the phone needs to be in QPST mode? I'm not entirely sure how to do this. Can someone point me in the right direction?
2. Since I already deactivated the phone, when my friend tries to re-activate on pageplus (with a new SIM), do we need to contact PP and tell them this device is now 4g?
3. Does it matter that I have a custom ROM running 4.3? I don't think so, but would like confirmation.
I really don't want to mess up this gift.
Thanks for any and all advice!

Dapeche said:
1. From what I understand to "unflash" I need to use DFS (cdmatool.com) and set Ruim config to RuimOnly. However, I believe the phone needs to be in QPST mode? I'm not entirely sure how to do this. Can someone point me in the right direction?
Click to expand...
Click to collapse
In general, this is done via USBSettings dialog, see if this thread helps you to get this menu enabled: http://forum.xda-developers.com/showthread.php?t=2227576

I have a i605 currently flashed to page plus 3g can't write with dfs without spec and I can't seem to get it can anybody point me in the right direction
I'm dumb figured it all out except page plus they keep saying I have to go to a dealer I said I am no longer flash but they keep telling to have a dealer manually flash it.....?
Update got everything working once I was in ruim only I called them at told them I had two phones and gave them the full imied as my second phone then the iccid and voila activation was a breeze

T-Mobile Wifi Calling Error: Reg90

Has anyone had this error message with their Z3? I have searched the web, and all that I can find is that Tmo needs to send an update to the phone to fix. Called customer service, waited for the update, restarted phone, and nothing. They then said to switch out the SIM card, and that did nothing either. Any others?

Yup, the same exact problem, they sent a sim update, new sim card, hell I even had them send me a new phone. Same thing. E911 is also set up correctly, lol they know where to send the bill. My daughters all have the one touch fierce and their WiFi calling works perfectly. My wife's m8 also works fine. What's the freaking problem.

I had that for a day and it dissapeared, my dad's M8 had it too and it went away somehow in a day or two.

This has been going on for 2 weeks now and no one seems to have an answer

I guess mine was slightly different.
Apparently TMO has to send you an OTA update. Also make sure its enabled in services in your MyTmobile account under services if not just tick the box and enable it.
TMO Forums:
https://support.t-mobile.com/thread/78656

I had same issue
Artood2s said:
Has anyone had this error message with their Z3? I have searched the web, and all that I can find is that Tmo needs to send an update to the phone to fix. Called customer service, waited for the update, restarted phone, and nothing. They then said to switch out the SIM card, and that did nothing either. Any others?
Click to expand...
Click to collapse
I bought my mother-in-law this same phone (as I already have the D6616). Her phone had the same problem as you. Took me awhile to figure what happened, but like others have said, you need to contact T-Mobile and give them the error code. (I did this over T-Mobile chat) They in turn will push out a quick OTA update (can take up to two hours). Bad thing is I never received notification that it had updated, and I even asked the T-Mobile rep if I will see the update, and she stated yes. So, after two hours, and you still don't see the update, go ahead and restart your device. Once it reboots, your wifi calling feature will be updated and will then work. Oh, MAKE SURE YOUR WIFI IS TURNED OFF and WIFI CALLING IS TURNED OFF AS WELL! Your device will not update if you are not on the T-Mobile cellular network (as needed to push out the OTA). Be sure to turn on wifi calling once phone restarts and then you’re free to also turn on wifi.

Wifi calling error code reg90
U need to setup "e911" information with your service provider.

[Q] Bought used phone, won't activate with new sim from verizon

Hey M8 crew!
New to the M8, just bought the phone from swappa. Apparently it has root/s-off/some lollipop build installed on it. Clean ESN.
Took it into verizon to activate it on my line, but the sim doesn't appear to activate as they expect. It detects that it was inserted, says to reboot, after reboot still says no service, and never performs any activation. Verizon rep was claiming that the rom was causing the failures, and it does appear to likely be software related if it is never launching the activation. VZW tech support was no help other than saying it may take up to 12 hours to activate the sim (bs meter going off). Spent 2 hours in the store trying to get it to activate, saying everything was fine on their end. Tried a couple sims in store to rule out a bad sim. Have even tried the tape on the sim trick to see if that might have something to do with it.
Has anyone ever seen / heard of this sort of situation before and have any idea of how to fix it?
Would a stock RUU flash help out in anyway?
Is it because it is not a verizon rom that the activation is not happening? Would I somehow be able to use a different verizon phone to activate the sim, then put it in my phone and have service start working?
Any ideas?

nectur said:
Hey M8 crew!
New to the M8, just bought the phone from swappa. Apparently it has root/s-off/some lollipop build installed on it. Clean ESN.
Took it into verizon to activate it on my line, but the sim doesn't appear to activate as they expect. It detects that it was inserted, says to reboot, after reboot still says no service, and never performs any activation. Verizon rep was claiming that the rom was causing the failures, and it does appear to likely be software related if it is never launching the activation. VZW tech support was no help other than saying it may take up to 12 hours to activate the sim (bs meter going off). Spent 2 hours in the store trying to get it to activate, saying everything was fine on their end. Tried a couple sims in store to rule out a bad sim. Have even tried the tape on the sim trick to see if that might have something to do with it.
Has anyone ever seen / heard of this sort of situation before and have any idea of how to fix it?
Would a stock RUU flash help out in anyway?
Is it because it is not a verizon rom that the activation is not happening? Would I somehow be able to use a different verizon phone to activate the sim, then put it in my phone and have service start working?
Any ideas?
Click to expand...
Click to collapse
If the phone was used on another carrier it might be stuck in a non lte/CDMA mode. Flash stock vzw ruu. Do a factory reset. Go into mobile settings and make sure it's set to global. Then see if default network is set to vzw. Then check provisioning.

That did it. Thanks!

nectur said:
That did it. Thanks!
Click to expand...
Click to collapse
Np...bought an m8 for my dad a couple months back and same thing happened. I finally realized it was used on a different carrier.