Has anyone had this error message with their Z3? I have searched the web, and all that I can find is that Tmo needs to send an update to the phone to fix. Called customer service, waited for the update, restarted phone, and nothing. They then said to switch out the SIM card, and that did nothing either. Any others?
Yup, the same exact problem, they sent a sim update, new sim card, hell I even had them send me a new phone. Same thing. E911 is also set up correctly, lol they know where to send the bill. My daughters all have the one touch fierce and their WiFi calling works perfectly. My wife's m8 also works fine. What's the freaking problem.
I had that for a day and it dissapeared, my dad's M8 had it too and it went away somehow in a day or two.
This has been going on for 2 weeks now and no one seems to have an answer
I guess mine was slightly different.
Apparently TMO has to send you an OTA update. Also make sure its enabled in services in your MyTmobile account under services if not just tick the box and enable it.
TMO Forums:
https://support.t-mobile.com/thread/78656
I had same issue
Artood2s said:
Has anyone had this error message with their Z3? I have searched the web, and all that I can find is that Tmo needs to send an update to the phone to fix. Called customer service, waited for the update, restarted phone, and nothing. They then said to switch out the SIM card, and that did nothing either. Any others?
Click to expand...
Click to collapse
I bought my mother-in-law this same phone (as I already have the D6616). Her phone had the same problem as you. Took me awhile to figure what happened, but like others have said, you need to contact T-Mobile and give them the error code. (I did this over T-Mobile chat) They in turn will push out a quick OTA update (can take up to two hours). Bad thing is I never received notification that it had updated, and I even asked the T-Mobile rep if I will see the update, and she stated yes. So, after two hours, and you still don't see the update, go ahead and restart your device. Once it reboots, your wifi calling feature will be updated and will then work. Oh, MAKE SURE YOUR WIFI IS TURNED OFF and WIFI CALLING IS TURNED OFF AS WELL! Your device will not update if you are not on the T-Mobile cellular network (as needed to push out the OTA). Be sure to turn on wifi calling once phone restarts and then you’re free to also turn on wifi.
Wifi calling error code reg90
U need to setup "e911" information with your service provider.
Related
I just purchased the sII skyrocket 2 weeks back. About every 2 days the phone would stop receiving calls. When i get a call it would ring a half ring and then at the top where it shows the signal would have a no sign on it like there was no service. Once its goes in to this mode it would stay in it until i reboot the phone. The problem is that i never actually know who is calling because it never logs a missed call. This is the first i have seen this on any andriod phone. Here is some additional info, Stock Rom, Phone is rooted, i have the following apps frozen using TBP
Allshare
At&T code canner
At&T hotspots
At&T navigator
At&T ready 2 Go
Featured Apps
Kies Air
Kies via Wifi
Kobo
NFC service
NFC Test
QIK Lite
QuickOffice
Social Hub
Tethering Manager
Any thoughts? I should add that its not specific to one contact it will happen to anyone that calls, i have tested this calling from my wifes cell to mine when it was in this mode and saw it happen constantly. Rebooted sitting in the same place phone received calls.
no feedback yet from community but i thought i would post an updated.
I contacted AT&T that suggested it could be the SIM card, I went to the store tonight and changed out my SIM. I will update this if the issue goes away so in case some one has something similar they know what a potential fix could be.
Interesting.
Did you get a new SIM card when you get the Skyrocket as well?
I know they issued me a new SIM card at purchase because of the LTE upgrade.
yep they gave me a new sim card when i purchased it said the old one wasn't compatible. So the one i just received replaced the new one that is about 10 days old.
just to update this, this seemed to have fully fixed my issue.. since i swapped the sim there have been no issue
Your SIM was probably dying out, it happens.
Glad to see your issue was fixed, I was thinking you were having LOS, same as the Sprint SGS II.
Hey M8 crew!
New to the M8, just bought the phone from swappa. Apparently it has root/s-off/some lollipop build installed on it. Clean ESN.
Took it into verizon to activate it on my line, but the sim doesn't appear to activate as they expect. It detects that it was inserted, says to reboot, after reboot still says no service, and never performs any activation. Verizon rep was claiming that the rom was causing the failures, and it does appear to likely be software related if it is never launching the activation. VZW tech support was no help other than saying it may take up to 12 hours to activate the sim (bs meter going off). Spent 2 hours in the store trying to get it to activate, saying everything was fine on their end. Tried a couple sims in store to rule out a bad sim. Have even tried the tape on the sim trick to see if that might have something to do with it.
Has anyone ever seen / heard of this sort of situation before and have any idea of how to fix it?
Would a stock RUU flash help out in anyway?
Is it because it is not a verizon rom that the activation is not happening? Would I somehow be able to use a different verizon phone to activate the sim, then put it in my phone and have service start working?
Any ideas?
nectur said:
Hey M8 crew!
New to the M8, just bought the phone from swappa. Apparently it has root/s-off/some lollipop build installed on it. Clean ESN.
Took it into verizon to activate it on my line, but the sim doesn't appear to activate as they expect. It detects that it was inserted, says to reboot, after reboot still says no service, and never performs any activation. Verizon rep was claiming that the rom was causing the failures, and it does appear to likely be software related if it is never launching the activation. VZW tech support was no help other than saying it may take up to 12 hours to activate the sim (bs meter going off). Spent 2 hours in the store trying to get it to activate, saying everything was fine on their end. Tried a couple sims in store to rule out a bad sim. Have even tried the tape on the sim trick to see if that might have something to do with it.
Has anyone ever seen / heard of this sort of situation before and have any idea of how to fix it?
Would a stock RUU flash help out in anyway?
Is it because it is not a verizon rom that the activation is not happening? Would I somehow be able to use a different verizon phone to activate the sim, then put it in my phone and have service start working?
Any ideas?
Click to expand...
Click to collapse
If the phone was used on another carrier it might be stuck in a non lte/CDMA mode. Flash stock vzw ruu. Do a factory reset. Go into mobile settings and make sure it's set to global. Then see if default network is set to vzw. Then check provisioning.
That did it. Thanks!
nectur said:
That did it. Thanks!
Click to expand...
Click to collapse
Np...bought an m8 for my dad a couple months back and same thing happened. I finally realized it was used on a different carrier.
It's an H950 from the $250 ebay deal. I am on ATT service and the phone worked fine at H95010d
I contacted ATT customer service and had them pushed OTA software update to me. The first agent pushed H95011x to me, and things went wrong since then.
The phone cannot read the sim card (but no missing sim notice), baseband shown as unknown, if I press the "status" under the "about phone" page, the screen will flash black then go back to the about phone page.
Then I tried a factory reset. The phone started normal as if everything was fine, it just works on the first boot after the reset. But once I restart the phone, it went back to the same situation as above. I tried many times and the whole process is highly repeatable.
After that, I contacted ATT again, had the H95011z pushed to me, and it did not change the problem. Replacing sim card does not help, either.
Then I tried to get to those recovery methods on the forum, including installing the LGE mobile device drivers. But then under download mode, the phone (LGE Android MTP device) is shown as "this device cannot start (code 10)". Thus I was not able to perform fix with the tools.
I am kinds of stuck in the middle. Any help and/or suggestions would be appreciated. Thanks!
neeviour said:
It's an H950 from the $250 ebay deal. I am on ATT service and the phone worked fine at H95010d
I contacted ATT customer service and had them pushed OTA software update to me. The first agent pushed H95011x to me, and things went wrong since then.
The phone cannot read the sim card (but no missing sim notice), baseband shown as unknown, if I press the "status" under the "about phone" page, the screen will flash black then go back to the about phone page.
Then I tried a factory reset. The phone started normal as if everything was fine, it just works on the first boot after the reset. But once I restart the phone, it went back to the same situation as above. I tried many times and the whole process is highly repeatable.
After that, I contacted ATT again, had the H95011z pushed to me, and it did not change the problem. Replacing sim card does not help, either.
Then I tried to get to those recovery methods on the forum, including installing the LGE mobile device drivers. But then under download mode, the phone (LGE Android MTP device) is shown as "this device cannot start (code 10)". Thus I was not able to perform fix with the tools.
I am kinds of stuck in the middle. Any help and/or suggestions would be appreciated. Thanks!
Click to expand...
Click to collapse
I am having exactly the same problem. I also replaced the SIM card, but instead of trying the 11z version I tried the rooted 11x version without any change.
As you wrote, a factory reset will restore the ability to make calls until the first reboot. For data, there is no APN listed. Manually inputing the APN info will cause data to work perfectly, but all APN data is lost/missing again on reboot.
icherub said:
I am having exactly the same problem. I also replaced the SIM card, but instead of trying the 11z version I tried the rooted 11x version without any change.
As you wrote, a factory reset will restore the ability to make calls until the first reboot. For data, there is no APN listed. Manually inputing the APN info will cause data to work perfectly, but all APN data is lost/missing again on reboot.
Click to expand...
Click to collapse
I've sent the phone back for an exchange, and the new one is coming tomorrow. Just noticed your reply.
So there is no fix for this? Or is there a problem with the ATT OTA update we should be aware of?
neeviour said:
I've sent the phone back for an exchange, and the new one is coming tomorrow. Just noticed your reply.
So there is no fix for this? Or is there a problem with the ATT OTA update we should be aware of?
Click to expand...
Click to collapse
This may not be a widespread issue, so there might've been an issue particularly with your Flex (maybe corrupt file?). I've used 11x/z without encountering this.
Ace42 said:
This may not be a widespread issue, so there might've been an issue particularly with your Flex (maybe corrupt file?). I've used 11x/z without encountering this.
Click to expand...
Click to collapse
Feels nervous when finding others had the same issue.
Just want to make sure if there's anything i should know of before dealing with the new unit coming tomorrow.
quick report:
Received the exchange. Seems new as the last one but does not contain the ATT sim as the last one did.
Tried update with date changing, for like 20 times no luck. Chatted ATT service to push the two updates (11x and 11z) in, one after another. Gone through the process without problem, and seems working fine now.
So, it may be device dependent or case specific. Thank you for your input.
I also had to send mine back. It's sitting on my front step now. The strange thing is that the email telling me the phone was being sent back only listed a speaker problem, which I did not have and never mentioned. We'll see.
neeviour said:
quick report:
Received the exchange. Seems new as the last one but does not contain the ATT sim as the last one did.
Tried update with date changing, for like 20 times no luck. Chatted ATT service to push the two updates (11x and 11z) in, one after another. Gone through the process without problem, and seems working fine now.
So, it may be device dependent or case specific. Thank you for your input.
Click to expand...
Click to collapse
Are you an AT&T customer? I can not get the update to come OTA, whether with an ATT valid SIM or a different SIM. I also tried calling and because I have a business ATT line, I got business support and the lady was clueless about pushing the update to my phone from her end.
hamzer11 said:
Are you an AT&T customer? I can not get the update to come OTA, whether with an ATT valid SIM or a different SIM. I also tried calling and because I have a business ATT line, I got business support and the lady was clueless about pushing the update to my phone from her end.
Click to expand...
Click to collapse
What time of day are you calling? I found calling during east coast business hours got me the right people. Ask the agent if they can do a google search from their computer, when/if they say yes ask them to search for H95011x or H95011z. The first or second result should be the AT&T page that explains the update, once my rep had that info things went MUCH better. (I just noticed for me the first result is my post on this forum LOL)
I got my Flex 2 back and LG did nothing to fix it. The repair said "fixed speaker". I never said anything about a speaker. After a couple frustrated calls I had to send it a second time. The second time, it was returned "no problem found". The phone is unusable as it can only be used after a reset and before a reboot or power off. More fun with LG later today. Ultimately, though, the reps don't give a crap; I couldn't even get the last rep to increase shipping speed, even though they failed to repair it the first time.
will be on phone with AT&T in the morning or via chat with them. I have no access to my mobile data. no explanation, just stopped working. went into my settings for both SIM cards as I have data on both actually, but SIM 1 is the primary one and designated one. Switching settings made no difference. Had it look for network automatically says it's joined already but it's not. no connection, no internet, no Google now, email, nothing. confirmed with AT&T that my data plan is not messed up and still on my account. Was driving and it was end of night so rebooted phone, did not resolve, going to call tomorrow. (As if I have the time but I missed messages I needed to deal with on my break that came in personal email that can't be accessed at work). any suggestions with APN settings I might be missing or something? This is random and weird. Unless somehow data has an outage but you'd think the rep would have told me that. But this needs to be resolved! Don't know if it's AT&T or a phone setting.Was working fine until this morning! Love the phone! anyone? BTW: I just logged on to my account and have an idea: My SIM 1 is from my Note 3 but my account is reflecting that my device is now showing as unknown, so I wonder if this is what is going on. hmm. I'm still getting phone and text messages though. I guess I'm just going to register my SIM 1 now over too as well. maybe that's the issue. my SIM 2 is fully registered to the Pure XL. I guess I'm going online chat tomorrow again. Also, 4G is not showing up now as an available option under network choice either. So I wonder then if it's an outage issue but it's almost midnight here. Will have to chat tomorrow at work somehow with tech support. It's not the issue though with the SIM card from the Note 3 being the cause because SIM 2 is registered under the Pure XL and has a separate data plan, and that one is not working either when I try to temporarily make SIM 2 the data SIM slot. So it must be an AT&T issue. Will have to wait until the morning.
Sent from my PURE XL using Tapatalk
Well, I have learned it is a twofold issue, but importantly, all CARRIER RELATED, not phone related thank goodness. Phone is perfect
1. AT&T did a roving sweep and discovered that my IMEI on SIM 1 was no longer matching, so it turns out that my using the Note 3 SIM was in fact, an issue. I have since had the SIM re-provisioned with the IMEI for SIM 1 now on the Pure XL.
2. However...it turns out that AT&T in my area is in fact having major data network outage problems and that explains why I was unable to log on yesterday even with my properly provisioned SIM 2. And the network is in fact, STILL OUT. So I am still unable to access mobile data and it has NOTHING to do with the phone. It's AT&T all the way. Right now-the network is down. Okay-fine-that happens-they'll fix it. If you call 611 there's an alert saying that. I know stuff happens. That explains why I was getting the weird readouts yesterday that were only showing 2G and 3G on the network. (and I still wasn't getting any connection to data anyway).
So that's what the issue is. The network has been down though more than a day which is ridiculous. They really need to fix that or pro-rate that on our bills then! I'm unable to access personal email from work and rely on my phone and this is a long stretch of time to be offline so they really need to get on the stick and fix this!
babsk said:
Well, I have learned it is a twofold issue, but importantly, all CARRIER RELATED, not phone related thank goodness. Phone is perfect
1. AT&T did a roving sweep and discovered that my IMEI on SIM 1 was no longer matching, so it turns out that my using the Note 3 SIM was in fact, an issue. I have since had the SIM re-provisioned with the IMEI for SIM 1 now on the Pure XL.
2. However...it turns out that AT&T in my area is in fact having major data network outage problems and that explains why I was unable to log on yesterday even with my properly provisioned SIM 2. And the network is in fact, STILL OUT. So I am still unable to access mobile data and it has NOTHING to do with the phone. It's AT&T all the way. Right now-the network is down. Okay-fine-that happens-they'll fix it. If you call 611 there's an alert saying that. I know stuff happens. That explains why I was getting the weird readouts yesterday that were only showing 2G and 3G on the network. (and I still wasn't getting any connection to data anyway).
So that's what the issue is. The network has been down though more than a day which is ridiculous. They really need to fix that or pro-rate that on our bills then! I'm unable to access personal email from work and rely on my phone and this is a long stretch of time to be offline so they really need to get on the stick and fix this!
Click to expand...
Click to collapse
Fortunately the network is up again by 12 noon. Getting LTE just fine on newly re provisioned SIM 1 card.
Sent from my PURE XL using Tapatalk
I spent over 2 hours last nite with att reps trying to enable numbersync to work between the s3 and s8 phones.. the s8 phone is an unlocked phone (not bought through att), only to find out today via another rep that the phone must be bought via ATT or truly att branded.. which i find a bit absurd, as i think others have succeeded..
Is this really the case.. anyone know or have this same experience?
Specifically this error would appear after going through the get started via the watch then on the phone (after creating a seperate accessid):
Oh darn! We can't enable device syncing on this phone. Want to find out more? Call us at 800.331.0500 so we can help.
(MSSITWINREL12)
If this turns out to really be an unlocked phone issue (which is a bit ridiculous), i think i read that it might be possible to take my sim card out of that phone and put in another phone that is att branded, enable number sync then put the card back in my s8 and go from there
Thanks
The phone does not have to be AT&T branded, I have a T-Mobile Note 4 and until the last update numbersync worked. Updated my S# over the weekend after avoiding it for as long as possible, and now numbersync is no longer an option on my S3.
pasco8525 said:
The phone does not have to be AT&T branded, I have a T-Mobile Note 4 and until the last update numbersync worked. Updated my S# over the weekend after avoiding it for as long as possible, and now numbersync is no longer an option on my S3.
Click to expand...
Click to collapse
Thanks for the reply.. your saying you had an unlocked tmobile phone on att and it was working till a recent tizen update then?
The rep further told me to take the phone to the best buy samsung experience store and have it flashed with the att firmware to get around this issue.. maybe not needed then? (which i assume means a wipe and possibly lose my unlock)
I had the same problem with my Gear S3 and my Axon 7. Worked on for a solid hour with an ATT rep in store and another hour on phone with someone else. Finally it was determined that it wouldn't work on an unlocked phone. Haven't tried the sim swap with an ATT branded device yet, but if I do, I'll let you know if it works.
karlkarloff said:
I had the same problem with my Gear S3 and my Axon 7. Worked on for a solid hour with an ATT rep in store and another hour on phone with someone else. Finally it was determined that it wouldn't work on an unlocked phone. Haven't tried the sim swap with an ATT branded device yet, but if I do, I'll let you know if it works.
Click to expand...
Click to collapse
Spoke to an att rep again today who called me.. basically in my case the 950U1 s8 phone.. because its this model it wont work with numbersync they say.. they also contradicted the previous reps suggestion of taking the phone to the samsung experience place and having the att firmware flashed on it (or doing it at home).. saying it wont help.. that they need HD voice provisioned and it wont let them provision it (the phone wont).. they said swapping the sim card to a real att phone only may help for a short period, till the system does a sweep, sees a non att phone and reverts it (same with just adding the imei to the database).. There is also a good chance the recent update to either the s3 or the samsung s8 caused numbersync to do a detection for unlocked phones and not allow this (they indicated).
They said i could still try doing the firmware flash but it probably wouldnt work (i dug around online trying to find out which flash it would be and i didnt get too far, short of going to the store to do it at best buy samsung experience)
Really sucks, as the alternative, if i were that desperate to enable this feature (i dont think i am willing to go this far) would be to sell the old phones and get new att branded ones.. end up costing me the price of a new watch in the mix just to do that
markm75 said:
Spoke to an att rep again today who called me.. basically in my case the 950U1 s8 phone.. because its this model it wont work with numbersync they say.. they also contradicted the previous reps suggestion of taking the phone to the samsung experience place and having the att firmware flashed on it (or doing it at home).. saying it wont help.. that they need HD voice provisioned and it wont let them provision it (the phone wont).. they said swapping the sim card to a real att phone only may help for a short period, till the system does a sweep, sees a non att phone and reverts it (same with just adding the imei to the database).. There is also a good chance the recent update to either the s3 or the samsung s8 caused numbersync to do a detection for unlocked phones and not allow this (they indicated).
They said i could still try doing the firmware flash but it probably wouldnt work (i dug around online trying to find out which flash it would be and i didnt get too far, short of going to the store to do it at best buy samsung experience)
Really sucks, as the alternative, if i were that desperate to enable this feature (i dont think i am willing to go this far) would be to sell the old phones and get new att branded ones.. end up costing me the price of a new watch in the mix just to do that
Click to expand...
Click to collapse
.
When I first bought the watch it was for the numbersync feature. My first problem was even though the Samsung rep and the bestbuy rep said that it would work with my Note3, it did not. took several calls and many hours of trying to figure out the HD Voice (VOlte) provisioning. Bought a TMobile Note 4, rooted and rom'ed this worked to setup numbersync. the only problem was it would occasionally turn off numbersync, this occurred about once a month. Then if failed completely said that this line is not accceptabl;e for numbersync. this was after about six months. Discovered that it appeared to be age of firmware related, I was on a TM firmware that was several updates out of date. When I odin flashed the latest firmware numbersync worked again until the recent update to 3.0.0.1 on the gear firmware. Now I have the line not acceptable for numbersync again. I'm going to try to update firmware again to see if that works. If not I will probably look to change carriers to TM. will cost the price of a new watch, but will get me out of AT&Ts locked boot loader.
BTW, setting up numbersync on a different phone and switching back will not work, Tried several times and as soon as you turn on the phone that is not HD Voice capable with your SIM card in it the system sees it and turns off numbersync almost instantly. went throught that trying to get my Note 3 to work.
In all my experience the Samsung and AT&T reps were not a good resource. Numbersync does not appear to be a very popular feature and they do not know much about it.
pasco8525 said:
.
When I first bought the watch it was for the numbersync feature. .
Click to expand...
Click to collapse
My main motivation for it has been that.. someone correct me if this isnt accurate.. if your phone dies or is off.. when you dial someone from the watch or text them it will still show the cell phone phone number, not the watch phone number as it does now if bluetooth isnt on.
I'm in the process of gathering the files i need to do the att firmware flash and hopefully hd voice works then (as others say it has).
markm75 said:
My main motivation for it has been that.. someone correct me if this isnt accurate.. if your phone dies or is off.. when you dial someone from the watch or text them it will still show the cell phone phone number, not the watch phone number as it does now if bluetooth isnt on.
I'm in the process of gathering the files i need to do the att firmware flash and hopefully hd voice works then (as others say it has).
Click to expand...
Click to collapse
Yes, that is the whole point of numbersync. The watch uses the phones number not it's own.
Tried updating to the latest firmware and a ROM based on it. No luck still get a rather comical response "Oh darn! We can't enable device syncing on this phone. " worked until the tisen update.
There also seems to be confusion on numbersync with the att reps.. one person told me the watches dont need their own numbers.. that numbersync is all we need (but how would the watch make a call if the phone is off).. another said yes they need external numbers for number sync or solo
edit: i see your last post.. so the latest reps are correct then.... so they assigned us numbers and $10 access fees each with activation fees for no reason basically.. ugh
The watch has to have it's own number, that is it's address on the network. Without it numbersync would have no way to send calls to it. Same as with the LTE enabled iPads they could not make a call, but had to have an address on the cellular network.
Just a quick note...i too spent 3 hours in an AT&T store trying to get numbersync to work..., finally returned the S3 Frontier cancelled the number in it and left frustrated...i now have a GS8 unlocked on AT&T through my work...that is synced to a Verizon Gear S3 Classic lte and i simply use call forwarding with YouMail. If i do not answer my phone after 3 rings it gets sent to my watch and if I still do not answer then Youmail picks it up..If I call out or text with the watch separately then I just let my customers know that I have 2 numbers 1 for my cell and one for their watch. I just don't think AT&T is ready for the Numbnersync technology yet and they just don't care enough to train their own people on it, sad as it is a good promise...
Sent from my iPad using Tapatalk
pasco8525 said:
The watch has to have it's own number, that is it's address on the network. Without it numbersync would have no way to send calls to it. Same as with the LTE enabled iPads they could not make a call, but had to have an address on the cellular network.
Click to expand...
Click to collapse
I meant phone number.. are you saying phone number? After the rep said i didnt need a phone number for each watch, she credited me back the cost of the two lines and said just to contact them that they would enable the numbersync once i had the phones ready.. I'm assuming number means imei, which they still have in the system.
Yes each watch has to have it's own phone number. I believe this is another case of AT&T rep not understanding number sync.
I managed to firmware update so that i have the att bloatware (didnt even need reset, all software was kept).. i confirmed HD voice is working but WiFi calling throws an error to contact ATT.. hd voice was the key for numbersync.. however.. despite this.. and 2 hours on the chat line with ATT.. i still get an error when you do the s3's get started numsync and it opens the page on the phone.. the oops, device sync cant work with your phone (which went from a 950U1 to a 950U btw, which is good as well).. They escalated to another backend team, but i highly doubt they will get it working.. most likely they'll still complain that my phone (was) an unlocked phone, despite adding the att firmware to it.
markm75 said:
I managed to firmware update so that i have the att bloatware (didnt even need reset, all software was kept).. i confirmed HD voice is working but WiFi calling throws an error to contact ATT.. hd voice was the key for numbersync.. however.. despite this.. and 2 hours on the chat line with ATT.. i still get an error when you do the s3's get started numsync and it opens the page on the phone.. the oops, device sync cant work with your phone (which went from a 950U1 to a 950U btw, which is good as well).. They escalated to another backend team, but i highly doubt they will get it working.. most likely they'll still complain that my phone (was) an unlocked phone, despite adding the att firmware to it.
Click to expand...
Click to collapse
Update here.. i managed to get everything working by going with a new sim card.. wifi calling works now.. and i was able to complete numbersync setup.. the only remaining issue i have is that my callerid seems to be blocked on the receiving end.
markm75 said:
Update here.. i managed to get everything working by going with a new sim card.. wifi calling works now.. and i was able to complete numbersync setup.. the only remaining issue i have is that my callerid seems to be blocked on the receiving end.
Click to expand...
Click to collapse
With the Firmware did you have to go through the full process where you changed the CSC and flashed the ATT firmware? Currently I am running a Sprint phone that is unlocked an running the US Unlocked firmware. Even running the ATT firmware they still were not able to get HD Voice or WiFi calling working for me.
eaglerugby04 said:
With the Firmware did you have to go through the full process where you changed the CSC and flashed the ATT firmware? Currently I am running a Sprint phone that is unlocked an running the US Unlocked firmware. Even running the ATT firmware they still were not able to get HD Voice or WiFi calling working for me.
Click to expand...
Click to collapse
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
markm75 said:
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
Click to expand...
Click to collapse
Thanks. It sounds like the latest firmware they did seems to fix some of the issues from bringing a non-ATT phone over but does not resolve everything. It looks like I won't be able to do this though. ATT and the ebay seller are unable to clear the ICCID on my watch, I have to sadly do a return now.
Kinda unrelated, yet ATT was horrible even for normal Sammy phone/watch. After dumping ATT service/hardware for various reasons a few moths back... Sammy watch/phone from Verizon hardware/service works flawlessly. Am carrier neutral, but one works reliably, one didn't.
BTW, Sammy pay via watch hiccuped via ATT at times, yet works flawless via Verizon.
markm75 said:
The full steps, or mostly full.. are here in this thread..
The short of it was that i only ran regular odin at first.. just did HOME_CSC (using the verizon firmware which covers all carriers).. then rebooted the phone and did all the check boxes and the regular CSC.. after rebooting nothing was wiped and att bloatware was there... at this point hd voice was working.. wifi calling wasnt.. so i went to the store, got a new sim card today, then wifi calling was working.. numbersync took the code on the phone without error.. however.. now i'm realizing it isnt really working.. when i turned the phone off, and texted, it showed my s3 phone number.. and my callerid is still botched.. i think att botched something in this whole process.. so yet another call to them needed.
Click to expand...
Click to collapse
well 5 chat people later they finally fixed the unknown callerid issue.. apparently there is an internal back end feature for numbersync regarding it set to active and on.. both toggles were on.. the rep removed the "on" and now my callerid shows my number when calling from my phone (and from the watch when watch is in solo mode too).. everything works! :laugh: