Related
this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip
Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers
has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu
A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116
actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)
...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz
Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!
Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.
We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...
it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André
sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!
Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
Hi,
I'm planning to upgrade my O2 mini to a newer firmware version.
Recently seems to have a nice 27MB Store upgrade firmware which is what I want. Would this upgrade my Radio as well ?
Please give some advise on how to upgrade, before I was trying to use the MaUpgradeUt_noID.exe with the Jam rom 1.06, but it's seems not able to detect the version of the existing and new rom version.
I'm planning to upgrade to something like listed below.
Rom version: 1.11 WWE
Radio version: 1.05
Existing version:
Rom version: 1.03.00 WWE
Rom Date: 11/01/04
Radio Verson: 1.01.00
Protocol version: 1337.38
ExtRom version: 1.03.166 WWE
Need advise on upgrade O2 mini too
Hi,
I've planned to do this to. But I've never done that before.
Please I need advices !!
Dams
Re: Need advise on upgrade O2 mini too
dams said:
Hi,
I've planned to do this to. But I've never done that before.
Please I need advices !!
Dams
Click to expand...
Click to collapse
now youre two soo... YOU need advices..
me too. hehe, now WE need advices. please..
Count me in too. needs help.
Guys,
What do you want to know?? Its a lengthy process to upgrade to the 27mb storage 1.11 ROM version but it can be done.
THe reason why you dont get a ROM version when running MaUpgradeUT_NOID is because your device should be in bootloadrer mode when running this and therefore can not read the ROM version. But the upgrade will still work.
wheres the link of these files needed for us to upgrade?
and what shud we donwload??
all files are located in the xda-developers ftp..........
WGonzales[dC said:
]wheres the link of these files needed for us to upgrade?
and what shud we donwload??
Click to expand...
Click to collapse
Here are the all the files that you guys are going to need for ROM Upgrade and Anansky 27mb Storage Mod.
FOR ROM UPGRADE
WWE QTEK S100 V1.11 ROM - http://forum.xda-developers.com/viewtopic.php?t=19932 (read the first post, download the zip.)
MaUpgradeUt_noID.exe - ftp://xda:[email protected]/Magician/MaUpgradeUt_noID.exe
WinRAR - http://www.rarlab.com/rar/wrar342.exe
READ the link http://forum.xda-developers.com/viewtopic.php?t=19932 but here is a simple walkthrough..
Make sure battery in Magician is charged and your computer is stable
Unzip the MA_Dangaard_WWE_11100_129_11100_Ship.zip
1) Use WinRAR to extract the WWE_11100xxxxx.exe (all files) to a folder,
2) Copy MaUpgradeUt_noID.exe to that folder.
3) Get Magician to bootloader mode (Camera button+ Power button +reset button), disable USB in Activesync (connection settings).
4) Plug Magician to USB cable (the magician should say USB v1.0 on the screen).
5) Now run MaUpgradeUt_noID.exe, and click next to update ROM.
6) Wait until upgrade is complete (approx. 15-20 mins) then soft reset (via reset button)
Optional 27mb Storage
Anasky big storage - ftp://xda:[email protected]/Magician/anansky/magician_os1.11wwe_bigstorage_6.zip
Ntrw.exe - ftp://xda:[email protected]/Magician/ntrw.exe
Hexeditor - ftp://xda:[email protected]/Magician/Backup tools1/hexedfull.exe
Romupdate.exe - ftp://xda:[email protected]/Magician/Backup_tools/romupdate.exe
Procedure.doc - ftp://xda:[email protected]/Magician/Backup tools1/Procedure.doc
This mod is not as simple as ROM upgrade so read this thread for more information about this Mod.
http://forum.xda-developers.com/viewtopic.php?t=20043
"WWE QTEK S100 V1.11 ROM - http://forum.xda-developers.com/viewtopic.php?t=19932 (read the first post, download the zip.) "
i couldn't d/l the file from the first post. Can i get this from other websites?
thanks!
Nutdhanai said:
WGonzales[dC said:
]wheres the link of these files needed for us to upgrade?
and what shud we donwload??
Click to expand...
Click to collapse
Here are the all the files that you guys are going to need for ROM Upgrade and Anansky 27mb Storage Mod.
FOR ROM UPGRADE
WWE QTEK S100 V1.11 ROM - http://forum.xda-developers.com/viewtopic.php?t=19932 (read the first post, download the zip.)
MaUpgradeUt_noID.exe - ftp://xda:[email protected]a-developers.com/Magician/MaUpgradeUt_noID.exe
WinRAR - http://www.rarlab.com/rar/wrar342.exe
READ the link http://forum.xda-developers.com/viewtopic.php?t=19932 but here is a simple walkthrough..
Make sure battery in Magician is charged and your computer is stable
Unzip the MA_Dangaard_WWE_11100_129_11100_Ship.zip
1) Use WinRAR to extract the WWE_11100xxxxx.exe (all files) to a folder,
2) Copy MaUpgradeUt_noID.exe to that folder.
3) Get Magician to bootloader mode (Camera button+ Power button +reset button), disable USB in Activesync (connection settings).
4) Plug Magician to USB cable (the magician should say USB v1.0 on the screen).
5) Now run MaUpgradeUt_noID.exe, and click next to update ROM.
6) Wait until upgrade is complete (approx. 15-20 mins) then soft reset (via reset button)
Optional 27mb Storage
Anasky big storage - ftp://xda:[email protected]/Magician/anansky/magician_os1.11wwe_bigstorage_6.zip
Ntrw.exe - ftp://xda:[email protected]/Magician/ntrw.exe
Hexeditor - ftp://xda:[email protected]/Magician/Backup tools1/hexedfull.exe
Romupdate.exe - ftp://xda:[email protected]/Magician/Backup_tools/romupdate.exe
Procedure.doc - ftp://xda:[email protected]/Magician/Backup tools1/Procedure.doc
This mod is not as simple as ROM upgrade so read this thread for more information about this Mod.
http://forum.xda-developers.com/viewtopic.php?t=20043
Click to expand...
Click to collapse
finally suceeded...
Damn66
Please let us know if you have noticed any bugs/problems after upgrade.
hello,
i read so many posts on this site, that it's starting to confuse newbies.
I have a German MDA Compact, and would like to flash it with a WWE rom.
Now, i've seen some ppl suggest to use "devicedata.exe" and change the bat file etc...procedure. While others say to unzip the "upgrade.exe" and run "MaUpgradeUt_noID.exe".
Which procedure do i need to follow in order to upgrade my Mdac?
Also, which ROM image do you suggest?
thanks for your support!
I agree, totally clueless and have read so many posts and now totally confused.
Can any patient person give us a straight and simple explanation of ROM upgrading? Which ones to use, what to watch out for etc. I'm sure there's lots of people who have the same questions but don't ask.
Many thanks in advance for anyone can help.
Finally someone asks!
I upgraded my German MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130 and everything works fine right now (it was an upgrade from T-mobile).
I would like to upgrade to the 1.11 WWE Rom version and also the bigstorage version without extended ROM, but I'm afraid dong that.
Anybody experience with that?
Andre
Hello to all,
can you share me that: MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130
Thank you
John,
Normally if you get the official release from dangaard telecom, it's just an EXE file that you have to run and everything works fine.
If you get a country id error, then you need to download the MAupgrade_noid and you have to unzip the EXE file in the same folder as the MAupgrade_NOID.
Then in stead of BAUpgrade, you have to run MAupgrade_NOID
Hi there,
I uploaded my upgrade file to 1.06 German T-mobile (no simlock) to the ftp site. This works fine for my MDA Compact
MA_TMDE_10601_130_10500_Ship
See it here.
ftp://ftp.xda-developers.com/Uploads/Magician/
Andre
If its simply a MDA to MDA ROM update, you should be able to simply run the file and that should work fine, however if its a Imate / qtek / MDA German to MDA Compact its tricky stuff, but can be done.
If you are able to get hold of the required rom, you will need to extract its files and install the upgrade executable file.... easy isnt it
Ok here it goes
1. Download the Rom file
2. Right click and extract to a named folder
3. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade if you were an imate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the xda developers site.
4. Once you have this maup....noid file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In activesync, click on file and connection settings and untick the USB connection.
6. Connect the phone to the USB, and run the maupdateut_noid,
7. The upgrade wizard wil start, go through a few checks then eventually come up with the coutry Id error.
8. Run the maupgradeut_noid file again and this time it should allow you to run the wizard.
9. The process should then go through 3 stages which should last about 10 - 15 minutes.
10. When finished you should get the upgrade successful notification and a prompt to reset the device
11. Hope that helps.
12. Rgds
I like others have been confused by all the different methods and possibilities for ROM changes. I particularly am interested in the BIG ROM upgrade that gives you 27Mb more free space. However, the threads on that subject are very long and reading all the posts is confusing.
It would be great if we had a FAQ that could be a Sticky at the top of the forum. I am sure its a lot of work to compile the FAQ but it would be sad to see all the hard work in these forums not get fully utilised.
I would be hugely grateful if there was document that summarised the best methods for ROM upgrades.
on the ftp site, you need to download the procedure document, that explains everything
hth
jim
thanks a lot to all of you guys for helping me out!
this is exactly what this forum is about.
ftp
Hi, All my first post here, How do we get acess to the ftp site for the instruction to the 27 meg bigrom when i try to go to ftp it won't get me inn.
Thanks
Domingo
Hello, i have done lot of reading there about all upgrades on our Magician's.. So for everyone who is new here to this forum, there is latest update available with easy few steps to upgrade
ROM version 1.12.00 WWE
Radio version 1.13.00
Protocol version 1337.43
ExtROM version 1.12.131 WWE
It's an IMATE ROM, with CZ (Czech) customized ExtROM. so anyone who want to cook his own ROM, just
download this file > http://live61.com/mda/yourownEXT.nb1 and follow Extended ROM steps above
It's complete Dump of my device, including CE ROM, EXT ROM and RADIO STACK. This update flawlessly worked on 3 devices i had in my hands.. So I hope, it will help you with no problems. (no need to change any 440bytes and other 'hacks' found there in forum).
Install is so easy
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
2. write it on your SD card (at least 128mb) with NTRW application - "ntrw.exe write Imate_WWE_1.12_1.13_1.12.131.nb1 g:" (g: as your SD card drive letter)
3. insert SD card to MDA, and enter bootloader with CAMERA+POWER buttons together with RESET
4. after about 8 seconds you will get message with "Sections=2, press Power.." so press Power button and wait until "Checksum OK" message appears. Then reset your MDA
Thats it!
Customized Extended ROM
1. install this plugin to your Total Commander. (restart of PC needed!) http://live61.com/mda/VirtualDisk_1.30b2.rar
2. mount as an virtual image yourownEXT.nb1 file
3. make here your desired changes and unmount it
4. run WinHEX, open modified yourownEXT.nb1 (ouch.. i know, you need this.. http://sweb.cz/ftp1/WinHexSerial.txt)
5. select whole file with CTRL+A and copy to clipboard CTRL+C
6. open Imate_WWE_1.12_1.13_1.12.131.nb1 file, go to OFFSET 2C0019C and write clipboard data with CTRL+B
7. save Imate_WWE_1.12_1.13_1.12.131.nb1 and follow Install steps
If anything goes wrong, please let me know. Good luck. John
im going to try it....
(idem to tam šupnúť...)
i believe i will be able to do it, becouse i was not able to do before with dumped rom on ftp...
Hi
I made a SD card as You wrote.
When I make a HR, I have clear dark screen with "Serial" on the top and "v 1.00" on the booteom of the screen.
What is wrong?
Thanks for help.
howto
@all,
please aid a novice:
-How do I mount "your own extrom" in total commander???
-What and how can I make changes then????
Thanks in advance
kavalir said:
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
Click to expand...
Click to collapse
Recently got a M500 and trying your rom but the link posted my be dead. Can you upload it again. Thanks.
how to upgrade only Radio 1.13 ? i downloaded from ftp
MagicianRadio_1.13.00_maupgrade
currently, i using Qtek1.12ROM for o2mini..
Can i just run the setup file ? then do upgrade only radio part.
Is there a newest rom than mine ?
hi,
i just bought a mda compact with t mobile few day ago,
it look like this
ROM Version = 1.12.00 WWE
ROM Date 05/28/05
Radio version 1.12.00
Protocol version 1337.42
ExtRom 1.12.152 WWE
is anything that can be upgraded ?
and how can i get the 02 active GUI on it ?
or remove the Tmobile one ?
I did try to find the answers elswere but seam to be a tiny bit complex to find out. (probably my english
i used to be able to surf the internet over GPRS for free with the o2 payand go sim card, i still do with the 02 montly thought.
any one know more about it ?
Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too
you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn
well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support
1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)
Thank you very much.
I'm now downloading and trying the ways you pointed out.
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here
ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster
I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.
Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing
Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx
White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx
mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.
Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx
RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx