hello,
i read so many posts on this site, that it's starting to confuse newbies.
I have a German MDA Compact, and would like to flash it with a WWE rom.
Now, i've seen some ppl suggest to use "devicedata.exe" and change the bat file etc...procedure. While others say to unzip the "upgrade.exe" and run "MaUpgradeUt_noID.exe".
Which procedure do i need to follow in order to upgrade my Mdac?
Also, which ROM image do you suggest?
thanks for your support!
I agree, totally clueless and have read so many posts and now totally confused.
Can any patient person give us a straight and simple explanation of ROM upgrading? Which ones to use, what to watch out for etc. I'm sure there's lots of people who have the same questions but don't ask.
Many thanks in advance for anyone can help.
Finally someone asks!
I upgraded my German MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130 and everything works fine right now (it was an upgrade from T-mobile).
I would like to upgrade to the 1.11 WWE Rom version and also the bigstorage version without extended ROM, but I'm afraid dong that.
Anybody experience with that?
Andre
Hello to all,
can you share me that: MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130
Thank you
John,
Normally if you get the official release from dangaard telecom, it's just an EXE file that you have to run and everything works fine.
If you get a country id error, then you need to download the MAupgrade_noid and you have to unzip the EXE file in the same folder as the MAupgrade_NOID.
Then in stead of BAUpgrade, you have to run MAupgrade_NOID
Hi there,
I uploaded my upgrade file to 1.06 German T-mobile (no simlock) to the ftp site. This works fine for my MDA Compact
MA_TMDE_10601_130_10500_Ship
See it here.
ftp://ftp.xda-developers.com/Uploads/Magician/
Andre
If its simply a MDA to MDA ROM update, you should be able to simply run the file and that should work fine, however if its a Imate / qtek / MDA German to MDA Compact its tricky stuff, but can be done.
If you are able to get hold of the required rom, you will need to extract its files and install the upgrade executable file.... easy isnt it
Ok here it goes
1. Download the Rom file
2. Right click and extract to a named folder
3. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade if you were an imate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the xda developers site.
4. Once you have this maup....noid file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In activesync, click on file and connection settings and untick the USB connection.
6. Connect the phone to the USB, and run the maupdateut_noid,
7. The upgrade wizard wil start, go through a few checks then eventually come up with the coutry Id error.
8. Run the maupgradeut_noid file again and this time it should allow you to run the wizard.
9. The process should then go through 3 stages which should last about 10 - 15 minutes.
10. When finished you should get the upgrade successful notification and a prompt to reset the device
11. Hope that helps.
12. Rgds
I like others have been confused by all the different methods and possibilities for ROM changes. I particularly am interested in the BIG ROM upgrade that gives you 27Mb more free space. However, the threads on that subject are very long and reading all the posts is confusing.
It would be great if we had a FAQ that could be a Sticky at the top of the forum. I am sure its a lot of work to compile the FAQ but it would be sad to see all the hard work in these forums not get fully utilised.
I would be hugely grateful if there was document that summarised the best methods for ROM upgrades.
on the ftp site, you need to download the procedure document, that explains everything
hth
jim
thanks a lot to all of you guys for helping me out!
this is exactly what this forum is about.
ftp
Hi, All my first post here, How do we get acess to the ftp site for the instruction to the 27 meg bigrom when i try to go to ftp it won't get me inn.
Thanks
Domingo
Related
Hello, i have done lot of reading there about all upgrades on our Magician's.. So for everyone who is new here to this forum, there is latest update available with easy few steps to upgrade
ROM version 1.12.00 WWE
Radio version 1.13.00
Protocol version 1337.43
ExtROM version 1.12.131 WWE
It's an IMATE ROM, with CZ (Czech) customized ExtROM. so anyone who want to cook his own ROM, just
download this file > http://live61.com/mda/yourownEXT.nb1 and follow Extended ROM steps above
It's complete Dump of my device, including CE ROM, EXT ROM and RADIO STACK. This update flawlessly worked on 3 devices i had in my hands.. So I hope, it will help you with no problems. (no need to change any 440bytes and other 'hacks' found there in forum).
Install is so easy
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
2. write it on your SD card (at least 128mb) with NTRW application - "ntrw.exe write Imate_WWE_1.12_1.13_1.12.131.nb1 g:" (g: as your SD card drive letter)
3. insert SD card to MDA, and enter bootloader with CAMERA+POWER buttons together with RESET
4. after about 8 seconds you will get message with "Sections=2, press Power.." so press Power button and wait until "Checksum OK" message appears. Then reset your MDA
Thats it!
Customized Extended ROM
1. install this plugin to your Total Commander. (restart of PC needed!) http://live61.com/mda/VirtualDisk_1.30b2.rar
2. mount as an virtual image yourownEXT.nb1 file
3. make here your desired changes and unmount it
4. run WinHEX, open modified yourownEXT.nb1 (ouch.. i know, you need this.. http://sweb.cz/ftp1/WinHexSerial.txt)
5. select whole file with CTRL+A and copy to clipboard CTRL+C
6. open Imate_WWE_1.12_1.13_1.12.131.nb1 file, go to OFFSET 2C0019C and write clipboard data with CTRL+B
7. save Imate_WWE_1.12_1.13_1.12.131.nb1 and follow Install steps
If anything goes wrong, please let me know. Good luck. John
im going to try it....
(idem to tam šupnúť...)
i believe i will be able to do it, becouse i was not able to do before with dumped rom on ftp...
Hi
I made a SD card as You wrote.
When I make a HR, I have clear dark screen with "Serial" on the top and "v 1.00" on the booteom of the screen.
What is wrong?
Thanks for help.
howto
@all,
please aid a novice:
-How do I mount "your own extrom" in total commander???
-What and how can I make changes then????
Thanks in advance
kavalir said:
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
Click to expand...
Click to collapse
Recently got a M500 and trying your rom but the link posted my be dead. Can you upload it again. Thanks.
how to upgrade only Radio 1.13 ? i downloaded from ftp
MagicianRadio_1.13.00_maupgrade
currently, i using Qtek1.12ROM for o2mini..
Can i just run the setup file ? then do upgrade only radio part.
Is there a newest rom than mine ?
hi,
i just bought a mda compact with t mobile few day ago,
it look like this
ROM Version = 1.12.00 WWE
ROM Date 05/28/05
Radio version 1.12.00
Protocol version 1337.42
ExtRom 1.12.152 WWE
is anything that can be upgraded ?
and how can i get the 02 active GUI on it ?
or remove the Tmobile one ?
I did try to find the answers elswere but seam to be a tiny bit complex to find out. (probably my english
i used to be able to surf the internet over GPRS for free with the o2 payand go sim card, i still do with the 02 montly thought.
any one know more about it ?
i've heard that WM2003 in himalaya gadget can be uprade to WM2005, it's very interesting and i going to try the uprade, but i have some question about the upgrade, my question is:
1. what's the risk during upgrading? could my device occuring some permanent error?
2. what's the consequence of this? will my device working slower? or working faster?
3. if i don't satisfy with the WM2005 can i downgrade back to the WM2003 OS?
please help me by answering my question
Response:
1. the device may fail, but you can restart the whole process entering the device in bootloader mode and upgrading (happen to me once)
2.Your device will work Faster but sometimes (at boot sequence) will be slower.
that's the price you have to pay. Other thing is there is no MMS in WM5 (dont work for me) and some camera issues, that can be fixed. But is more eye-candy than the WM2003 or 2003SE.
3. If you aint satisfied you can go back to 2003SE just putting the device in bootloader mode and then making the upgrade using a WM2003 ROM (the nbf file)
One thing: Tofclock and Buzz (thanks guys!) are working hard to bring us one stable, better and faster WM5 ROM, so be quiet and wait like me :wink:
Hi guys,
I ve also heard that after you upgrade to Wm 5.0 the phone vibratin wont work, is that true?
what else then?
:roll:
Thanks
Hi dickyw,
my vibration on my Himalaya works perfect...
Hi Guys,
Can anyone help another dumb newbie?
I upgraded my Himalaya to W2k5 OK from the O2 exe file, but I now want to downgrade to 2003 SE.
The folder I am trying to use to downgrade is WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip
Himaupgradeut.exe gives:- Error 120 Country ID error 1-1-8-n-1
HimaupgradeUt_noid.exe gives:- Error 103 ROM image file not found
XDA image tool gives me:-Unsupported file format error for NK.nbf
I have:-
Boot loader 1.06
CE image 1.72.00
Extended image 1.72.181
Radio image 1.17.00
Am I using the wrong tools, the wrong ROM or an incorrect procedure? I'm doing this for a friend so it's getting very embarassing. Any advice would be gratefully appreciated.
Thanks, Mike
Another issue to aware of when upgrading to WM5 is that you need to also upgrade to Activesync 4.1 as 3.8 won't work any more. Given that AS can be very tempremental it may take some time to get the sync link back up and working to your satisfaction so if your data is cruitial to your work then backup, backup, backup and upgrade when you have a few days free to dedicate to ironing out any wrinkles.
Then also xbackup doesn't work in WM5 so you are left with options like buying the latest Sprint backup soiftware (now WM5 compatible) or relying upon your PC Outlook to be your "backup data" (NB I use the Outlook free "backup" util to back up my pst files on exiting Outlook as double insurance).
Regards - Mallow1
PS I upgraded and v glad I did. Had a few AS issues but eventuall got there (took a lot of reading of forums and As battles, but worth it in the end)
cnimike,
One assumes that you have unzipped the zip file first before trying to reflash? If not try that (say use winzip). Also try reading the wiki as a guide to what to do (seee link attop left of page).
You are also best o use the HimaupgradeUt_noid.exe as at least it avoids the first error (esle you'll have to edit the flash files first and recompile them which is straight forward but if you are a noobie it's a step that can be avoided by using the "...noid.exe") and if you haven't unzipped the said file doing that may well sort out your second error.
Get back to me if you need more help.
Regards - Mallow1
cnimike said:
The folder I am trying to use to downgrade is WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip
Am I using the wrong tools, the wrong ROM or an incorrect procedure? I'm doing this for a friend so it's getting very embarassing. Any advice would be gratefully appreciated.
Thanks, Mike
Click to expand...
Click to collapse
I would suggest getting a hold of Sin's merged version (details in signature) or XDA2JoJo's version. Simply flash the ROM and you are there. Elsewhere, SIN has set out the steps in the most detailed fashion you are going to see outside a software manufacturer's manual. :wink:
When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent
Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M
Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears
I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M
Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards
The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???
Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M
Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update
I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M
Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english
Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M
thanx
Ok thanks a lot
regards
Hi I am new to all this.
I have an XDA EXEC, copied the T-mobile rom all works fine...except thebusual crap GPRS/3G reception.
I was looking at installing WM6 today....
Which file is the best/most stable at the moment there are many threads with many updates etc..
What do I gain by upgrading to WM6..
I am sure I am not the only one to ask this question
I to have an xda exec looking to install WM6 it is an old one from o2 since i only hear new ones can have WM6. So please help me to obatin the right file or rom as people have called it, i have done a search and found a few things related to WM6 but not sure whats stable and right to use before bricking my xda exec.
badman112 said:
I to have an xda exec looking to install WM6 it is an old one from o2 since i only hear new ones can have WM6. So please help me to obatin the right file or rom as people have called it, i have done a search and found a few things related to WM6 but not sure whats stable and right to use before bricking my xda exec.
Click to expand...
Click to collapse
Hi there
If the instructions are followed as written, it would be quite hard to brick your device.
As a start you could try Jwright's WM6 rom version 2.02.02, works great for me & I don't have any wifi bug (I use wifi a lot).
I say it's a good starting point as it is an executable upgrade (make sure to d/l the correct one for your device) just like the OFFICIAL roms, only it installs WM6 instead of WM5.
Download that one and give it a go.
That rom is very simple to install as it is a single executable file, with the whole package contained within.
All I did was
D/L the ROM for my device (jwrights 2.02.02, locate it in the forum).
Unrar it somewhere to my pc.
Put device into bootloader mode (power,backlight & reset) a screen with no backlight appears with the words serial vx.xx (x.xx being your version of the bootloader) you may need a torch to see it.
Connect device via usb.
Execute upgrade (file that you unrared to pc)
Once finished (about 20mins or so), unplug device & perform a hard reset (both softkeys & reset until the white option screen appears) and select "Restore" from the options. I believe it's 0 (zero).
This also upgrades your radio rom to the latest V1.15.
Happy bricking!
OOPS I mean upgrading.
Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too
you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn
well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support
1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)
Thank you very much.
I'm now downloading and trying the ways you pointed out.
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here
ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster
I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.
Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing
Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx
White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx
mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.
Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx
RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx