Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too
you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn
well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support
1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)
Thank you very much.
I'm now downloading and trying the ways you pointed out.
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here
ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster
I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.
Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing
Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx
White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx
mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.
Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx
RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx
Related
hello,
i read so many posts on this site, that it's starting to confuse newbies.
I have a German MDA Compact, and would like to flash it with a WWE rom.
Now, i've seen some ppl suggest to use "devicedata.exe" and change the bat file etc...procedure. While others say to unzip the "upgrade.exe" and run "MaUpgradeUt_noID.exe".
Which procedure do i need to follow in order to upgrade my Mdac?
Also, which ROM image do you suggest?
thanks for your support!
I agree, totally clueless and have read so many posts and now totally confused.
Can any patient person give us a straight and simple explanation of ROM upgrading? Which ones to use, what to watch out for etc. I'm sure there's lots of people who have the same questions but don't ask.
Many thanks in advance for anyone can help.
Finally someone asks!
I upgraded my German MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130 and everything works fine right now (it was an upgrade from T-mobile).
I would like to upgrade to the 1.11 WWE Rom version and also the bigstorage version without extended ROM, but I'm afraid dong that.
Anybody experience with that?
Andre
Hello to all,
can you share me that: MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130
Thank you
John,
Normally if you get the official release from dangaard telecom, it's just an EXE file that you have to run and everything works fine.
If you get a country id error, then you need to download the MAupgrade_noid and you have to unzip the EXE file in the same folder as the MAupgrade_NOID.
Then in stead of BAUpgrade, you have to run MAupgrade_NOID
Hi there,
I uploaded my upgrade file to 1.06 German T-mobile (no simlock) to the ftp site. This works fine for my MDA Compact
MA_TMDE_10601_130_10500_Ship
See it here.
ftp://ftp.xda-developers.com/Uploads/Magician/
Andre
If its simply a MDA to MDA ROM update, you should be able to simply run the file and that should work fine, however if its a Imate / qtek / MDA German to MDA Compact its tricky stuff, but can be done.
If you are able to get hold of the required rom, you will need to extract its files and install the upgrade executable file.... easy isnt it
Ok here it goes
1. Download the Rom file
2. Right click and extract to a named folder
3. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade if you were an imate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the xda developers site.
4. Once you have this maup....noid file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In activesync, click on file and connection settings and untick the USB connection.
6. Connect the phone to the USB, and run the maupdateut_noid,
7. The upgrade wizard wil start, go through a few checks then eventually come up with the coutry Id error.
8. Run the maupgradeut_noid file again and this time it should allow you to run the wizard.
9. The process should then go through 3 stages which should last about 10 - 15 minutes.
10. When finished you should get the upgrade successful notification and a prompt to reset the device
11. Hope that helps.
12. Rgds
I like others have been confused by all the different methods and possibilities for ROM changes. I particularly am interested in the BIG ROM upgrade that gives you 27Mb more free space. However, the threads on that subject are very long and reading all the posts is confusing.
It would be great if we had a FAQ that could be a Sticky at the top of the forum. I am sure its a lot of work to compile the FAQ but it would be sad to see all the hard work in these forums not get fully utilised.
I would be hugely grateful if there was document that summarised the best methods for ROM upgrades.
on the ftp site, you need to download the procedure document, that explains everything
hth
jim
thanks a lot to all of you guys for helping me out!
this is exactly what this forum is about.
ftp
Hi, All my first post here, How do we get acess to the ftp site for the instruction to the 27 meg bigrom when i try to go to ftp it won't get me inn.
Thanks
Domingo
Hello, i have done lot of reading there about all upgrades on our Magician's.. So for everyone who is new here to this forum, there is latest update available with easy few steps to upgrade
ROM version 1.12.00 WWE
Radio version 1.13.00
Protocol version 1337.43
ExtROM version 1.12.131 WWE
It's an IMATE ROM, with CZ (Czech) customized ExtROM. so anyone who want to cook his own ROM, just
download this file > http://live61.com/mda/yourownEXT.nb1 and follow Extended ROM steps above
It's complete Dump of my device, including CE ROM, EXT ROM and RADIO STACK. This update flawlessly worked on 3 devices i had in my hands.. So I hope, it will help you with no problems. (no need to change any 440bytes and other 'hacks' found there in forum).
Install is so easy
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
2. write it on your SD card (at least 128mb) with NTRW application - "ntrw.exe write Imate_WWE_1.12_1.13_1.12.131.nb1 g:" (g: as your SD card drive letter)
3. insert SD card to MDA, and enter bootloader with CAMERA+POWER buttons together with RESET
4. after about 8 seconds you will get message with "Sections=2, press Power.." so press Power button and wait until "Checksum OK" message appears. Then reset your MDA
Thats it!
Customized Extended ROM
1. install this plugin to your Total Commander. (restart of PC needed!) http://live61.com/mda/VirtualDisk_1.30b2.rar
2. mount as an virtual image yourownEXT.nb1 file
3. make here your desired changes and unmount it
4. run WinHEX, open modified yourownEXT.nb1 (ouch.. i know, you need this.. http://sweb.cz/ftp1/WinHexSerial.txt)
5. select whole file with CTRL+A and copy to clipboard CTRL+C
6. open Imate_WWE_1.12_1.13_1.12.131.nb1 file, go to OFFSET 2C0019C and write clipboard data with CTRL+B
7. save Imate_WWE_1.12_1.13_1.12.131.nb1 and follow Install steps
If anything goes wrong, please let me know. Good luck. John
im going to try it....
(idem to tam šupnúť...)
i believe i will be able to do it, becouse i was not able to do before with dumped rom on ftp...
Hi
I made a SD card as You wrote.
When I make a HR, I have clear dark screen with "Serial" on the top and "v 1.00" on the booteom of the screen.
What is wrong?
Thanks for help.
howto
@all,
please aid a novice:
-How do I mount "your own extrom" in total commander???
-What and how can I make changes then????
Thanks in advance
kavalir said:
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
Click to expand...
Click to collapse
Recently got a M500 and trying your rom but the link posted my be dead. Can you upload it again. Thanks.
how to upgrade only Radio 1.13 ? i downloaded from ftp
MagicianRadio_1.13.00_maupgrade
currently, i using Qtek1.12ROM for o2mini..
Can i just run the setup file ? then do upgrade only radio part.
Is there a newest rom than mine ?
hi,
i just bought a mda compact with t mobile few day ago,
it look like this
ROM Version = 1.12.00 WWE
ROM Date 05/28/05
Radio version 1.12.00
Protocol version 1337.42
ExtRom 1.12.152 WWE
is anything that can be upgraded ?
and how can i get the 02 active GUI on it ?
or remove the Tmobile one ?
I did try to find the answers elswere but seam to be a tiny bit complex to find out. (probably my english
i used to be able to surf the internet over GPRS for free with the o2 payand go sim card, i still do with the 02 montly thought.
any one know more about it ?
When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent
Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M
Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears
I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M
Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards
The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???
Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M
Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update
I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M
Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english
Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M
thanx
Ok thanks a lot
regards
G3:
http://rapidshare.com/files/128277343/G3_en_WMUPDAT.7z
G4:
http://rapidshare.com/files/124856283/Imat...6.1_EN.rar.html
If you are G4 version
you may use the G4_WMIPL.zip (136.2 KB)
unzip it and copy WMUPDAT.dip and WMIPL.dip
to the SD card
and press 6+power to flash it.
G3 only need one file(WMUPDAT.dip).
-----------------------------------------
如果你是G4的型号,解压附件的G4_WMIPL.zip
把WMUPDAT.dip 和 WMIPL.dip拷贝到sd卡上
按6+开机键开始刷机,G3只需要一个文件。
Thank you very much!
see you again, alechy,
Hi. Complete noob here. I have never flashed a phone before and have a few questions. The attached .zip only contains the " WMIPL.dip " file and the rapidshare link for the G4 .rar file is not working. Do I need the other file " WMUPDAT.dip " to upgrade? Is it the same file as the G3 one? Also, has anyone tried this yet? I use my SPL as my main phone and don't want to brick it.
onestoploser said:
Hi. Complete noob here. I have never flashed a phone before and have a few questions. The attached .zip only contains the " WMIPL.dip " file and the rapidshare link for the G4 .rar file is not working. Do I need the other file " WMUPDAT.dip " to upgrade? Is it the same file as the G3 one? Also, has anyone tried this yet? I use my SPL as my main phone and don't want to brick it.
Click to expand...
Click to collapse
是的,你当然需要那个WMUPDAT.dip去升级。
G3和G4是不一样的!
你可以再试试。
Alechy: Can you post your 文件名: I-MATE SPL G4 WM6.1 ROM V2 BATE2 080619.exe here? I can't read Chinese to download it from here: http://bbs.ucweb.com/redirect.php?tid=209308&goto=lastpost
Moving in
Collection of Rom's found off Chinese sites by two developers alechy and VYVVYK. Descriptions below are from the Chinese sites translated to English, so they are not mine. I have not tested them so use at your own risk!
WM5.0
Shipped WM5 downloaded from I-Mate:
http://rapidshare.com/files/131789782/ruu_spl_wwe.exe
Extracted WM5 from above shipped rom:
http://rapidshare.com/files/131789778/TF_WM5_i-mate_VER_01.09_5.1.342_15096.3.0.0_.rar
WM6.0
http://www.handsky.cn/thread-63962-1-1.html
G4WM6ROM:
(Marchese: installed via miniSD & data cable on 2nd try, defaults to Chinese with English available in Regional Settings, WMP & IE keys work, charging light works, apps unlocked, no SDHC support. This appears to be a stock WM6.0 Chinese Rom dump made flashable by alechy. Though Chinese, it has regional setting for about 12 countries. [/url]
http://www.fs2you.com/files/8a85dfcc-1912-11dd-9413-0014221b798a/
http://rapidshare.com/files/131721703/G4WM6ROM.rar
Perfect version G4WM6ROM
G4 WM6 G4 WM6 perfect version ready, add a number of useful software, modify the system
configuration, the power inside to increase the screen brightness adjustment, integration A4, Plum
input method (in the auxiliary switch inside option)
http://www.fs2you.com/files/b93560b0-1b29-11dd-a00c-00142218fc6e/
http://rapidshare.com/files/131721699/Perfect_version_G4WM6ROM.rar
End version G4WM6ROM
The update more, a lot of vvvvyky learn from the experience, and then stole a point from procedures.
Oh my goal is: Integration of the integrated software, do not have to delete the software, not with
software start-up……
TU, let me think about what this amendment it (for a perfect version of G4)
1. Camera adjustment
\my documents\my pictures The default storage location for the sd card \ my documents \ my pictures
2. Brightness from two to three
3. Integrates some commonly used software, such as flying letters, etc.
4. Extrom amended to add a few interesting comparison software
Can be installed in the annex to the optional software installation
There are still some details on the adjustment of the
5. Restore a functional Stk
6. Adds that drive high-speed SD card (not aware of no use)
This rom without major problems, will no longer update
Named special version of the end.
Download:
http://www.fs2you.com/files/a9bf7e82-2564-11dd-8b96-0014221f4662/
http://rapidshare.com/files/131789777/End_version_G4WM6ROM.rar
WM6.1
ImateSPL WM6.1 G4 by Alechy
(Marchese: installed via data cable, default English, WMP & IE keys not working (I-Mate-SPL_WMP-IE_Keys_Fix.cab), charging light not working (I-Mate-SPL_LED_Fix.cab), apps locked (spl_ApplicationUnlock.exe from PC), no SDHC support.
http://www.modaco.com/content/i-mate-spl-spl-modaco-com/269040/imate-spl-wm61-rom/
http://rapidshare.com/files/129995177/TF_WM6.1_i-mate_VER_3.01_5.2.19202_19202.1.0.0_.rar
I-Mate SPL WM6.1 ROM V2 BETA2 080619 BY VVVYKY Published
(Marchese: installed via miniSD, default Chinese but can change region to English with some Chinese, WMP & IE keys working but linked to other apps, charging light working, apps unlocked, working SDHC support!!!)
06/14 V2 BETA1 update:
Fully unlock (not because of competence certain procedures can not be installed)
I join the sliding panel display process to join the sliding panel display by adding capacity to integrate the theme palette weather procedures and related topics, such as adding. 。 . 。 . 。 . 。 .
BUG Camera frame model can not be repaired by the BUG
Camera repair procedures
4.0 MMS 4.0
HTC SDHC card integrated high-speed drives (to support more than 4 GB of memory card)
Integrated jbed 20080222 version of the j ava, such as. 。 . 。 . 。 . 。 . 。 . 。 . 。 . 。 . 。 .
The default shortcuts are as follows:
Custom integrated software keys AEBPlus2.62
Short by touch -> Task Manager
Under the touch -> File Manager
Short by music keys -> WMP player
Under the music keys -> mobile thumb drive
Short camera button -> camera
Under the camera button -> Notepad
http://rapidshare.com/files/132479312/I-MATE_SPL_G4_WM6.1_ROM_V2_Beta2_080619.exe
http://translate.google.co.uk/translate?u=http%3A%2F%2Fbbs.ucweb.com%2Fviewthread.php%3Faction%3Dprintable%26tid%3D209308&hl=en&ie=UTF8&sl=zh-CN&tl=en
G4WM6.1 ROM XIP 20202 faster! (Strongly recommended)
(Marchese: installed via miniSD, default Chinese, no English available, WMP & IE keys working but linked to other apps, charging light working, apps unlocked, no SDHC support.)
This version is still relatively good, a lot of integration software,
Shuawan not installed basic software! Strongly recommended! ! ! ! !
http://www.handsky.cn/thread-63962-1-1.html
http://www.fs2you.com/files/b874f5dc-3f69-11dd-b728-00142218fc6e/
http://rapidshare.com/files/131721701/G4WM6.1_ROM_XIP_20202_faster.rar
Imate SPL G4 WM6.1 96DPI 20080724 released
(Marchese: installed via miniSD, default Chinese, no English available, WMP & IE keys working but linked to other apps, charging light working, apps unlocked, no SDHC support.)
Repair MMS, changes to the default keyboard lock-time escalation of the letter and ucweb.
Recommendations: Close chome commonly used software (Bumei Guan)
http://www.fs2you.com/files/71838157-5935-11dd-bf1b-001143e7b41c/
http://rapidshare.com/files/132619070/Imate_SPL_G4_WM6_96DPI_20080724_by_alechy.rar
http://translate.google.co.uk/trans...d-63962-1-1.html&hl=en&ie=UTF8&sl=zh-CN&tl=en
MISC:
For after upgrading: xT9, Overclockers, network con figurer, apps & games included in shipped rom
http://rapidshare.com/files/131723239/i-mate_spl_wm6.1_after-upgrade_v1.rar
Install from SD:
http://forum.xda-developers.com/showpost.php?p=2239393&postcount=44
Wiki:
http://wiki.modaco.com/index.php/I-mate_SPL
http://translate.google.co.uk/trans...-339048-1-1.html&hl=en&ie=UTF8&sl=zh-CN&tl=en
http://amoi.it168.com/thread-339048-1-1.html
COOKING TOOLS:
http://rapidshare.com/files/131721695/WM6_ROM__32534___36753___24037___20855__Puma-T_-Cooking.rar
G4 custom templates (for cooking):
http://www.fs2you.com/files/ea94d92e-35dc-11dd-ab23-00142218fc6e/
http://rapidshare.com/files/131721698/G4_custom_templates.rar
led indicator tweak
can anybody post the reg tweak or workaround for the led.
tnx
LED Fix and WMP & IE keys Fix
dielo said:
can anybody post the reg tweak or workaround for the led.
tnx
Click to expand...
Click to collapse
The zip file contains LED info from the kitchen posted above. I created the attached cab file using the zip which works on my spl. You will need to app unlock first. Test at your own risk.
Just found the reg values for WMP & IE keys. The WMP & IE keys are much more responsive using the reg fix over AE Button Plus. Worked for mine but use at your own risk.
THANKS!!!
marchese said:
The zip file contains LED info from the kitchen posted above. I created the attached cab file using the zip which works on my spl. You will need to app unlock first. Test at your own risk.
Just found the reg values for WMP & IE keys. The WMP & IE keys are much more responsive using the reg fix over AE Button Plus. Worked for mine but use at your own risk.
Click to expand...
Click to collapse
mhan finally someone replied and gave me these nice fix...thanks mhan...
btw i still encounters some problems with alechy's rom:
1. it always hang when i access storage card thru file explorer and i only have 1gb minisd. i hope theres a fix for this.
2. typing on sms is too slow....could there be any tweak to make it faster or more responsive?
i believe the other roms are better but they are not fully in english.
thanks again mhan.
dielo said:
i believe the other roms are better but they are not fully in english.
thanks again mhan.
Click to expand...
Click to collapse
I sent alechy a pm and email requesting an English version of G4WM6.1 ROM XIP 20202 faster and add SDHC support. alechy's previous 6.1 EN rom has easy to read font and is all English, and his newest CH rom has .net 3.5.
Let us hope alechy finds some time to do this for us.
marchese said:
I sent alechy a pm and email requesting an English version of G4WM6.1 ROM XIP 20202 faster and add SDHC support. alechy's previous 6.1 EN rom has easy to read font and is all English, and his newest CH rom has .net 3.5.
Let us hope alechy finds some time to do this for us.
Click to expand...
Click to collapse
yes that woulb be really great...im having a hard time looking for language pack like in a cab for easy installation...let us hope he will do it.
Currently the Best WM6.1 English Rom for Puma_T
Install "ImateSPL WM6.1 G4 by Alechy" (Chinese sites suggest SD installation is most reliable)
Install reset.cab
Connect to a PC for apps unlock using spl_ApplicationUnlock.exe and restart phone
Install xT9 English
Install I-Mate-SPL_WMP-IE_Keys_Fix.cab
Install I-Mate-SPL_LED_Fix.cab
Install SIM network configurer
Install overclocker (max 216-220 recommended on Chinese sites)
Install I-Mate-SPL_SDHC_Patch.cab
Enjoy!
marchese said:
Install "ImateSPL WM6.1 G4 by Alechy" (Chinese sites suggest SD installation is most reliable)
Install reset.cab
Connect to a PC for apps unlock using spl_ApplicationUnlock.exe and restart phone
Install xT9 English
Install I-Mate-SPL_WMP-IE_Keys_Fix.cab
Install I-Mate-SPL_LED_Fix.cab
Install SIM network configurer
Install overclocker (max 216-220 recommended on Chinese sites)
Enjoy!
Click to expand...
Click to collapse
can you post the these cab files:
Install reset.cab
Install xT9 English
Install SIM network configurer
Install overclocker (max 216-220 recommended on Chinese sites)
thanks
I-Mate SPL SDHC Support Patch
THIS IS IT!!! Just had a coworker help me set up an account on it168.com. I tested the patch, and it worked with my 2gb Sandisk mini SD and 4gb A-Data micro SDHC with adapter. Enjoy!
http://amoi.it168.com/viewthread.php?tid=344272
dielo said:
mhan finally someone replied and gave me these nice fix...thanks mhan...
btw i still encounters some problems with alechy's rom:
1. it always hang when i access storage card thru file explorer and i only have 1gb minisd. i hope theres a fix for this.
thanks again mhan.
Click to expand...
Click to collapse
Hi dielo,
I did a FAT - Format to my MiniSD with the adapter and that solved the problem... Hope it work for you.
carlos_polanco said:
Hi dielo,
I did a FAT - Format to my MiniSD with the adapter and that solved the problem... Hope it work for you.
Click to expand...
Click to collapse
actually its working fine right now even i didnt do anything yet...
dielo said:
actually its working fine right now even i didnt do anything yet...
Click to expand...
Click to collapse
Hi Again,
That happened to me too, I thought it was fixed but if you try playing some files from the SD It will freeze your phone.
Good luck
onestoploser said:
Hi. Complete noob here. I have never flashed a phone before and have a few questions. The attached .zip only contains the " WMIPL.dip " file and the rapidshare link for the G4 .rar file is not working. Do I need the other file " WMUPDAT.dip " to upgrade? Is it the same file as the G3 one? Also, has anyone tried this yet? I use my SPL as my main phone and don't want to brick it.
Click to expand...
Click to collapse
Hi. Silly question: how to check if my SPL is G3 or G4? thanx for reply!
Indentify Version - G3 or G4
emde18 said:
Hi. Silly question: how to check if my SPL is G3 or G4? thanx for reply!
Click to expand...
Click to collapse
Two methods:
1) http://forum.xda-developers.com/showpost.php?p=2239393&postcount=44
2) Boot screen is different for G3 and G4, search around spl.modaco.com for screen shots.
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Spark_Vodafone_SPA_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo
A. Pre-Requisites
If your Tropy 7 is flashed with the ROM of the following release:
1. RUU_Spark_Vodafone_SPA_1.10.164.01_Radio_5.51.09.29_22.32.50.10U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your Tropy 7 is flashed with a different of the above 1 ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.164 i.e. with characteristic value 164
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1 ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Spark_Vodafone_SPA_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Spark_Vodafone_SPA_1.20.401.00_Radio_5.54.09.21_22.33b.50.10U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing Tropy 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your Tropy 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
I've installed this, but instead of Vodafone_SPA_1.20.401.00, I ended with Generic ROM 1.10.401.04
Links
The first link is death... The second is OK! (only 14,1MB?).
Endeavour1934 said:
I've installed this, but instead of Vodafone_SPA_1.20.401.00, I ended with Generic ROM 1.10.401.04
Click to expand...
Click to collapse
cchobbes said:
The first link is death... The second is OK! (only 14,1MB?).
Click to expand...
Click to collapse
Hi,
B.1. download link fixed
Let me know if all is ok
Regards, ansar
Update
It works perfect Ansar! A lot of thanks. My terminal is manufacture by Vodafone, but "free" (my operator is Yoigo). And it was very annoid all the branding by Vodafone. Now it desapeared... Thanks again.
Works perfectly, now it's 7.0.7389.0 without Vodafone customization (Edit: MS Zune updated it to 7.0.7390.0)
BUT like the previously posted Vodafone_SPA_1.10 version, display is still 16bit without dithering. The original ROM (Vodafone_SPA_1.09.164.06) was 32bit or maybe it had dithering everywhere except on IE.
My updated Trophy (Vodafone SPA) info:
OS: 7.0.7390.0
Firmware: 2250.09.12000.401
Hardware: 0003
Radio SW: 5.52.09.16_22.33a.50.10U
Radio HW: A.102.0.D4
Bootloader: 1.10.2250.1 (112663)
SOC: 2.2.5.0
Original version was:
OS: 7.0.7004.0
Firmware: 2250.09.10906.164
Hardware: 0003
Radio SW: 5.50.09.15_22.23.50.09U
Radio HW: A.102.0.D4
Bootloader: 1.9.2250.6
Any possibility to get the original version (1.09.164.06) to see if the problem with the display goes away?
Endeavour1934 said:
Works perfectly, now it's 7.0.7389.0 without Vodafone customization (Edit: MS Zune updated it to 7.0.7390.0)
BUT like the previously posted Vodafone_SPA_1.10 version, display is still 16bit without dithering. The original ROM (Vodafone_SPA_1.09.164.06) was 32bit or maybe it had dithering everywhere except on IE.
Any possibility to get the original version (1.09.164.06) to see if the problem with the display goes away?
Click to expand...
Click to collapse
Hi,
> Glad you also got MS NoDo update
> Display hardware is 24 bit per pixel in both models, Verizon (newer) and Spark
> Only a previous to 1.10 version of 1.08.164.02_Radio_5.50.09.18_22.24.50.09U
Regards, ansar
It don't work with my Trophy:
7.0.7008.0
2250.09.10906.166
5.50.09.15_22.23.50.09U
A.102.0.D4
1.9.2250.6(111329
2.2.5.0
Can you help me? Must i've installed before HSPL? Must it be unlocked? (If it's unlocked or not, it don't work with my trophy! )
wmplayer15 said:
It don't work with my Trophy:
7.0.7008.0
2250.09.10906.166
5.50.09.15_22.23.50.09U
A.102.0.D4
1.9.2250.6(111329
2.2.5.0
Can you help me? Must i've installed before HSPL? Must it be unlocked? (If it's unlocked or not, it don't work with my trophy! )
Click to expand...
Click to collapse
Hi,
Read more carefully section A of post #1
This is only for phones of Vodafone_SPA, Spanish operator, with characteristic value (CV) 164
Your ROM version is of CV 166, probably for a Vodafone_CH_DE operator (Austrian or Suiss Vodafone)
Regards, ansar
ansar.ath.gr said:
Hi,
> Glad you also got MS NoDo update
> Display hardware is 24 bit per pixel in both models, Verizon (newer) and Spark
> Only a previous to 1.10 version of 1.08.164.02_Radio_5.50.09.18_22.24.50.09U
Regards, ansar
Click to expand...
Click to collapse
First of all, big thanks for all these ROMs, I really appreciate your work.
Second, yes, the display is 24bit, however the images & menus are displayed in 16bit without dithering on those ROMs, except in IE which applies a dithering filter on websites.
However, ROM 1.09 and maybe previous ones, shows everything in 24bit (or maybe 16bit with dithering) everywhere except in IE, just the opposite of the newer versions.
I guess this was done on purpose to increase the overall speed of the OS (scrolling on 3rd party apps is much faster on 16bit-menus ROMs), but I'm not sure that I like giving up image quality in exchange for more speed.
I'm sorry for all the inconvenience I'm causing here, but could you post or send me a link to the Voda_SPA_1.08 version to compare?
Endeavour1934 said:
First of all, big thanks for all these ROMs, I really appreciate your work.
Second, yes, the display is 24bit, however the images & menus are displayed in 16bit without dithering on those ROMs, except in IE which applies a dithering filter on websites.
However, ROM 1.09 and maybe previous ones, shows everything in 24bit (or maybe 16bit with dithering) everywhere except in IE, just the opposite of the newer versions.
I guess this was done on purpose to increase the overall speed of the OS (scrolling on 3rd party apps is much faster on 16bit-menus ROMs), but I'm not sure that I like giving up image quality in exchange for more speed.
I'm sorry for all the inconvenience I'm causing here, but could you post or send me a link to the Voda_SPA_1.08 version to compare?
Click to expand...
Click to collapse
Hi,
It will be prepared and uploaded maybe today
Thnx for supporting
Regards, ansar
ansar.ath.gr said:
Hi,
Read more carefully section A of post #1
This is only for phones of Vodafone_SPA, Spanish operator, with characteristic value (CV) 164
Your ROM version is of CV 166, probably for a Vodafone_CH_DE operator (Austrian or Suiss Vodafone)
Regards, ansar
Click to expand...
Click to collapse
okay! Thank you! Can you send me a link with my download? i can't found it PN or here?
Sorry for my bad english, i've just 1 jear had english in my school..
wmplayer15 said:
okay! Thank you! Can you send me a link with my download? i can't found it PN or here?
Sorry for my bad english, i've just 1 jear had english in my school..
Click to expand...
Click to collapse
No NoDo available for Vodafone DE or Vodafone CH at the moment, you have to wait, and/or ask on a Vodafone_DE post, not in a Spanish one
Sorry, i don't found one for CH.. My Trophy is from swisscom.. (swisscom is operator)
i found the rom for difficult languages, but not for switzerland..
wmplayer15 said:
Sorry, i don't found one for CH.. My Trophy is from swisscom.. (swisscom is operator)
i found the rom for difficult languages, but not for switzerland..
Click to expand...
Click to collapse
Hi,
A Vodafone CH-DE ROM will be prepared and uploaded
Regards, ansar