Database Info

ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR

When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent

Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M

Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears

I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M

Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards

The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???

Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M

Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update

I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M

Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english

Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M

thanx
Ok thanks a lot
regards

faria_wm6 htc wizard vanilla [Technical Discussion Only]

Rom version; 2.18.0.0
Build aku 15341 aku.4.0.0.01 WWE
Ipl version ----
Spl version -----
Radio version recommended 2.19
Extended ROM version Faria v5
Htc logo
Splash screen
Page-pool-
YOU MUST HAVE A BOOTLOADE VERSION 2XXX OR ABOVE...(IPL/SPL 2.xx). also your device must be CID unlocked to avoid upgrading problems.
ROM changes
bluethoOth ftp[ NEW] FULLY WORKING
Sim card manager v 5.30 NEW
windows live 10.6.0026.1400 NEW ,THIS IS NOT BETA
PRESS and hold com manager button will toggle between vibrate and sound NEW
fixed rouge reg keys
fixed gprs workaround
Power management tweaked
voip integrated [follow this to make it work; http://forum.xda-developers.com/showthread.php?t=299950
voip button added to the com manager.
dtmf support
Default welcome restored
Added drm support [not tested]
New HTC Phone pad T9 with 16 languages
Extended_rom has been moved to windows. [for g4 support]
ussd service
Windows live/voice command –updated
Zip build; 1.11 25438
pocket XPDF
default today restored
dotfred PIMBAKCUP -in control panel settings...if you dont want it just delete the shorcut....
dotfred TASK MANAGER
Catalogue has been removed and SQL SERVER MOBILE. Why? Because there was no space left in the rom.
BT SIM ACCESS PROFILE.
Camera 3.3 fully working
Media files support added plus new gif engine
New com manager -With option to turn IR on/of!!!
All wireless’ security profiles support added
HTC X [press and old to close activated]
MMs arc-soft 3.5.1.22.c
Java v11.1.7.1023
New Sim services app [stk]
Replaced BT stereo profile with 3.3
Streaming media 2.10
Registry mods;
4 ways navigation added
File explorer set to view all files
AD2P set to DEFAULT
Different gprs icon
Wireless today plug in and redirect app
Mms folder activated
Disabled Microsoft feedback
Time zones change page activated
Disabled error reporting
Cab set to not delete after install
Time zone page on and checked
GPS icon on
Clear type on, landscape and internet explorer
Obex on
GPS com port fix
One line time in today [not lvm]
Time in all pages
Wireless 54g support added
Wireless preload status on upon boot.
if you are new to the wizard forum please start reading this ; http://forum.xda-developers.com/showthread.php?p=1184453#post1184453
Download link
This rom is a close as it can get to the original one.....a super clean rom is also in the way....
This rom is not a hack from another device.
Many thanks to mamaich BEPE AND dr.P FOR ALL THE Support and all the authors/xda of the freeware apps.... and specially.....my wife that lend her wizard to me in order to finish this rom,and for putting up with the many hours i ignored her.

The rom is based in the [REAL THING]
PLEASE DO NOT PM ME ABOUT THE ROM AS I WILL NOT ANSWER ....POST YOUR QUERIES IN THE FORUM FOR THE BENEFIT OF EVERYONE.
Please note that i had no chance of fully testing this rom because my wizard is not fully operational......this rom is intended for users to use it as a base for their own roms....
Therefore my support for this rom will be very limited.
This rom was build as a special request from jwzg and other members.
There will be a supper clean rom....for clean freaks....eheh
Also there will be an updated version of the current "real thing"
rom has been taking down due to a problem in phone settings....

................................................

Thanks for this Faria. This is a clean as I need and want it.
when someone downloads this, can they host it on www.putstuff.com? It is free and there is no download limit.
thanks

Great! I will compare with X-Plore to see witch one is the best.
THANK YOU FARIA

Wait 15 minutes
trojan9x said:
Thanks for this Faria. This is a clean as I need and want it.
when someone downloads this, can they host it on www.putstuff.com? It is free and there is no download limit.
thanks
Click to expand...
Click to collapse
I´m uploading.

Thanks papa

Extended_rom has been moved to windows. [for g4 support
Click to expand...
Click to collapse
How much space does this loose for G3 owners? Is there much work involved moving this back to the Extended_Rom?
What free space is there left.....
Andy

have just flashed
and, the *hang* at 99% is normal methinks, well with my device anyway!
its just 'customised' going to tinker with it tonight!
thank you once again faria!

Maybe delete?
ADB100 said:
How much space does this loose for G3 owners? Is there much work involved moving this back to the Extended_Rom?
What free space is there left.....
Andy
Click to expand...
Click to collapse
Can you delete it after reflashing or would it determine you hardreset another time???
By the way:
Download here: http://putstuff.putfile.com/62915/1383559

Downloaded... Thanks!

Downloading from puttyfree.
Thanks faria, been waiting for it. You're tha best.
can't wait to try it.

Another link...... http://putstuff.putfile.com/62922/5268338

ADB100 said:
How much space does this loose for G3 owners? Is there much work involved moving this back to the Extended_Rom?
What free space is there left.....
Andy
Click to expand...
Click to collapse
none....if you need to add your cabs to the extended rom edit the Config.txt that you will find in windows.
ex...
cab from windows;
CAB: \Windows\mycab.cab
Click to expand...
Click to collapse
cab from the extended rom;
CAB: \Extended_ROM\mycab.CAB
Click to expand...
Click to collapse
if you gonna cook the rom then change this in the registry;
[HKEY_LOCAL_MACHINE\Comm]
"AutoRun"="\\Windows\\autorun.exe"
"AutoRunCFG"="\\Windows\\config.txt"
Click to expand...
Click to collapse
to this;
"AutoRun"="\\Extended_ROM\\autorun.exe"
"AutoRunCFG"="\\Extended_ROM\\config.txt"
Click to expand...
Click to collapse

so far so good
So far so good (thanks for a clean rom faria...this is a perfect rom for me to start practicing cooking on). Only thing i have noticed so far is if you go into the phone settings and hit ok, it stays on that screen (only a soft reset removes it as far as i can tell. i flashed the rom again to make sure that wasnt it). can anyone replicate this?
*edit* end call button can close it.

does this clean rom also include registry wizard? and total commander?

faria said:
none....if you need to add your cabs to the extended rom edit the Config.txt that you will find in windows.
ex...
cab from windows;
cab from the extended rom;
if you gonna cook the rom then change this in the registry;
to this;
Click to expand...
Click to collapse
As always Faria, thanks for your time & effort.
Andy

Can someone pls check whether GPRS connection drop issue has been fixed? Mine drops even with 2.19 radio.

beowolf said:
does this clean rom also include registry wizard? and total commander?
Click to expand...
Click to collapse
Nope... so clean that it doesn't even have a second boot screen (The IPL/SPL screen, Mine is still TMobile )

is there a italian version of it

Another custom ROM for Tornado (Vista ROM)

Custom ROM for Tornado - Vista ROM for C600,V14
Pictures & details http://www.cnsmartphone.com/29170/viewspace-2335.html
download link: ftp://ftp.pkzn.com/Smartphone/Vista_ROM_(OS.nbf)_for_C600_V14.rar
This rom is in chinese, to change in english Start-Settings(see icon)-press 0(More), press 2(Regional Settings) - press joystick, choose UK English, restart
Applications deleted:
- all games
- java
Some application are in chinese and cannot be changed in english (CeleTask,SimMan,WM5torage)
I wonder how can i edit/create a .nbf rom (from standard rom) like this one. Anyone can help me?
BTW works fine on my C600

Hi, could you please tell me how to install this rom? i am a newbie with the cingular 2125... thanks in advanced

well is simple
Download Vista Rom, unzip it, connect your mobile to your pc (via ActiveSync), you will find in unziped Vista Rom folder a file named ROMUpdateUtility, open it and follow the steps.Is very simple
But first is recomanded to backup your device, see "The Doctor" post(s) here: http://www.modaco.com/index.php?showtopic=245662
good luck

I'm using this ROM. The joystick is better with this ROM as it was not with some others. Font is also pretty for displaying Chinese character.

No wifi
I liked this Rom until I discovered that there is no wifi control! Is it just me or is this really missing? Back to the I-Mate rom for my SP5.

What is the camera like on this rom?
Is it the same as the iphone rom?

@Lemark yes indeed joystick is better, joystick driver is the one form Orange UK AKU 2.0 i think.

bogy16 - Any chance you could upload this rom to one of the upload sites like yousendit or megaupload please?
I've tried to download it from the link and using an ftp client but I can only get about 2mb before it kicks me off!

OK,after lots of hassle and terminally slow download speeds,I've finally grabbed it.
If anybody else wants this rom
http://www2.flyupload.com/dl.php?fid=6547704

It is a pity...
GreatRom, but there is no wifi . Joystick is better but craze,ikone is beeeeeeeeeeeeeeest .Its too bad ,but must comeback to oder official ROM.
Verily,verily pity...

i don`t need wi-fi, my device does not have the hardware piece so...

Try this to show the WIFI on the Comm Manager...
Use a Registry Editor
HKLM - Software - HTC - CommManager
If there are 6 keys present..
Add a key named 7
Under the 7 key
Create a string named - Default
Value Data is - WLAN
Go to HKLM - Software - HTC - SupportedFunctions - just add 1 to current Value Data..if it's 6 then make it 7.
Wait for half a minute then reboot

You guys have to put NetCompactFrameWork into Storage Card/Program Files/NETcompactFramework/. It is provided by the Cooker in the original ROM as a separate bundle.　

Oh sorry I don't know if the guy provided NTFC bundle in the package.

Is french is aviable on this rom ?

no language french is not available, only english and chinese. meabe you can put it yourself, i don`t know

TaskManager Missing
Nice ROM. It would have been nice if it came with java though.
I installed the T9 language pack from the iPhone thread. Makes typing much easier
u can download it here
http://download.mobilnaut.cz/?id=73&akce=down
I have the Cingular 2125.
Is it possible to copy the taskmanager app from the faraday rom to this rom, 'cause I cant find the task manager.
After you load a few apps things start running very slow. Have to soft reset to clear the memory.

How to get a Kaiser to display Chinese ?

Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.

Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760

Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too

you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn

well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support

1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)

Thank you very much.
I'm now downloading and trying the ways you pointed out.

Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again

ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.

jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.

This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here

ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster

I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.

Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx

mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing

Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx

White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx

mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.

Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx

RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx

[17 march 2009] mATTE's ROM v1--try for be fast!

hi to all.
I wanna speack about my work.
this ROM it's not ordinary ROM, you can update without flash(yes you have understand)!
the ROM mATTE's had:
-all program that you need(see pictures), all removable as you like!!!
-OVERCLOCK TO CPU
-FREE RAM 61 MB
ABOUT mATTE's:
wm6.1professional CE OS 5.2.19188(built 19188.1.0.0)
this ROM born for "replace" the UDK rom for kaiser.
I,like UDK, love fast and stable ROM, and I had created a beautiful ROM based on framework.net 3.5
CAN DO:
-quickly internet with opera mini
-full internet with Opera
-messsenger with fix
-youtube, google video etcwith WVD
-read divX with TMCMP
-play music with S2P AND WMP
-see photos with S2V and camera album
-navitate with TT6.032 or google maps and gps tools
-office 2007 and scientific calculator
-wake up with G-allarm
-icontact x more fingerfriendly contact
-lock with S2u2
-winrar for every archive
-card export for read your microSD as pen drive
-spb backup to create the backup file in .exe like mine
-java manager
-kasiser tweak
-regedit
-quick menu...never be slow...menu like windows XP or vista in your start menu
YOU CAN REMOVE EVERY OF THIS PROGRAMS AS A NORMAL CABs!!
I leave you a little tutorial to flash and upgrade my rom(upgrade by kaiser with .exe file withoup use a pc)
download this file:
http://www.megaupload.com/?d=DOWFZFW3
http://www.megaupload.com/?d=88X62IGY
http://www.megaupload.com/?d=2LZFUSUT
then:
-flash my rom mATTE's(IT'S VERY UGLY...DON'T WORRY!!)
-flash my radio KAIS_Radinly_1.64.08.21_CustomRUU
-copy mattes1o.exe on device and ignore the file Backup_20090317.exe with RADIO ROM
-run mattes1o.exe--CLICK AVANTI AVANTI AVANTI(NEXT NEXT NEXT...)
-wait after reset and perform a soft reset
KNOW BUG:MY ROM IS A MANUAL SOFT RESET ONLY, WHEN REQUEST SOFT RESET, PLS APPLY MANUALLY
USED SPL 1.0 OLIPOF
TEST ON KAIS130 V1615 VODAFONE
some scrennshot:
please pay me a beer with paypal:
mail: mark4cops at yahoo.it
donators:
next update: the used .cab files of this ROM
please post your feedback

wow, this week we've got a bunch of new chefs
congratulations mate

Soooo, can any kind soul please explain me what's this besides a standard HTC ROM (build number uknown) with a few programs (tomtom, Google maps, etc). bundled into an exe that installs them after flash?.
Hey, I can get the cabs I want and install software on my device myself.

welcome new chef....
man am i glad i have a kaiser...
umm...maybe u should have reserved some posts?

vcespon said:
Soooo, can any kind soul please explain me what's this besides a standard HTC ROM (build number uknown) with a few programs (tomtom, Google maps, etc). bundled into an exe that installs them after flash?.
Hey, I can get the cabs I want and install software on my device myself.
Click to expand...
Click to collapse
Because he take it and sharing for everyone,however....i think that is WM6.0.

this night I update all information.
the rom is wm6.1
I had a kaiser from 2 year...never tried a fast ROM like the mine! please verify if i do something wrong.
do you understand wath you must do for had my rom??
flash rom - flash radio - execute the file mattes1o.exe from kaiser
it's a "new" way to upgrade rom features without flash...
I'm here for all!

what exactly does mattes1o.exe do?

installs pharm Parn, lol kidding, Congrats dude on the first release
Peace,
Josh

mbarvian said:
what exactly does mattes1o.exe do?
Click to expand...
Click to collapse
configure your kaiser and install many programs(removeable as you want).
if you don't run mattes1o.exe you have a basic rom without programs and very ugly, if you run...you have MY ROM
in this way i can create another mattesXX.exe for upgrade program automatically, resolve bug or change skin...you must only run my future mattesXX.exe

Andre_Santarell said:
configure your kaiser and install many programs(removeable as you want).
if you don't run mattes1o.exe you have a basic rom without programs and very ugly, if you run...you have MY ROM
in this way i can create another mattesXX.exe for upgrade program automatically, resolve bug or change skin...you must only run my future mattesXX.exe
Click to expand...
Click to collapse
why not include the packages/configuration as OEM Packages? Also, how would you uninstall?

You would un-install them like regular CABs I think. As in going to Start/Settings/System/Remove Programs.

mbarvian said:
why not include the packages/configuration as OEM Packages? Also, how would you uninstall?
Click to expand...
Click to collapse
if I not include you can unistall programs as you want, and I can modify ROM without use the ROMkitchen

kaiserii101 said:
you would un-install them like regular cabs i think. As in going to start/settings/system/remove programs.
Click to expand...
Click to collapse
exactly...as you like!!

Andre_Santarell,
So there is a ROM that is a base ROM, then the .exe is one of a mass .cabs and settings installer? we as users had been asking about a program to do this may i ask what it is you use?
Sorry for all the questions
stylez.

stylez said:
Andre_Santarell,
So there is a ROM that is a base ROM, then the .exe is one of a mass .cabs and settings installer? we as users had been asking about a program to do this may i ask what it is you use?
Sorry for all the questions
stylez.
Click to expand...
Click to collapse
HI
I create a base ugly rom ultra light, then I modify all rom with programs and skins, I make a backup of my work with sbp backup 2.0 that create an .exe file.
then if you want my work you must flash my rom(ugly and light) and then run my backup file that automatically install all...YOU DON'T DO NOTTHING ELSE

Andre_Santarell said:
hi to all.
I wanna speack about my work.
this ROM it's not ordinary ROM, you can update without flash(yes you have understand)!
the ROM mATTE's had:
-all program that you need(see pictures), all removable as you like!!!
-OVERCLOCK TO CPU
-FREE RAM 61 MB
ABOUT mATTE's:
wm6.1professional CE OS 5.2.19188(built 19188.1.0.0)
this ROM born for "replace" the UDK rom for kaiser.
I,like UDK, love fast and stable ROM, and I had created a beautiful ROM based on framework.net 3.5
CAN DO:
-quickly internet with opera mini
-full internet with Opera
-messsenger with fix
-youtube, google video etcwith WVD
-read divX with TMCMP
-play music with S2P AND WMP
-see photos with S2V and camera album
-navitate with TT6.032 or google maps and gps tools
-office 2007 and scientific calculator
-wake up with G-allarm
-icontact x more fingerfriendly contact
-lock with S2u2
-winrar for every archive
-card export for read your microSD as pen drive
-spb backup to create the backup file in .exe like mine
-java manager
-kasiser tweak
-regedit
-quick menu...never be slow...menu like windows XP or vista in your start menu
YOU CAN REMOVE EVERY OF THIS PROGRAMS AS A NORMAL CABs!!
I leave you a little tutorial to flash and upgrade my rom(upgrade by kaiser with .exe file withoup use a pc)
download this file:
http://www.megaupload.com/?d=DOWFZFW3
http://www.megaupload.com/?d=88X62IGY
http://www.megaupload.com/?d=2LZFUSUT
then:
-flash my rom mATTE's(IT'S VERY UGLY...DON'T WORRY!!)
-flash my radio KAIS_Radinly_1.64.08.21_CustomRUU
-copy mattes1o.exe on device and ignore the file Backup_20090317.exe with RADIO ROM
-run mattes1o.exe--CLICK AVANTI AVANTI AVANTI(NEXT NEXT NEXT...)
-wait after reset and perform a soft reset
KNOW BUG:MY ROM IS A MANUAL SOFT RESET ONLY, WHEN REQUEST SOFT RESET, PLS APPLY MANUALLY
USED SPL 1.0 OLIPOF
TEST ON KAIS130 V1615 VODAFONE
some scrennshot:
please pay me a beer with paypal:
mail: mark4cops at yahoo.it
donators:
next update: the used .cab files of this ROM
please post your feedback
Click to expand...
Click to collapse
U telling me you can overclock the cpu?

apatcas said:
U telling me you can overclock the cpu?
Click to expand...
Click to collapse
yes I found this in wiki of kaiser
http://forum.xda-developers.com/showthread.php?t=394384
http://forum.xda-developers.com/showpost.php?p=2232922&postcount=532

Andre_Santarell said:
yes I found this in wiki of kaiser
http://forum.xda-developers.com/showthread.php?t=394384
http://forum.xda-developers.com/showpost.php?p=2232922&postcount=532
Click to expand...
Click to collapse
I thought this was debated before and concluded as making your Kaiser not very stable??

biscuits1978 said:
I thought this was debated before and concluded as making your Kaiser not very stable??
Click to expand...
Click to collapse
it was and i've tried it on MANY roms and can't tell it makes any difference other than taking up space

Hey....congrats!!!!!......um......anyone tried the new rom yet? And how's the speed?....fast I hope!!