Database Info

Need advise on upgrade O2 mini

Hi,
I'm planning to upgrade my O2 mini to a newer firmware version.
Recently seems to have a nice 27MB Store upgrade firmware which is what I want. Would this upgrade my Radio as well ?
Please give some advise on how to upgrade, before I was trying to use the MaUpgradeUt_noID.exe with the Jam rom 1.06, but it's seems not able to detect the version of the existing and new rom version.
I'm planning to upgrade to something like listed below.
Rom version: 1.11 WWE
Radio version: 1.05
Existing version:
Rom version: 1.03.00 WWE
Rom Date: 11/01/04
Radio Verson: 1.01.00
Protocol version: 1337.38
ExtRom version: 1.03.166 WWE

Need advise on upgrade O2 mini too
Hi,
I've planned to do this to. But I've never done that before.
Please I need advices !!
Dams

Re: Need advise on upgrade O2 mini too
dams said:
Hi,
I've planned to do this to. But I've never done that before.
Please I need advices !!
Dams
Click to expand...
Click to collapse
now youre two soo... YOU need advices..
me too. hehe, now WE need advices. please..

Count me in too. needs help.

Guys,
What do you want to know?? Its a lengthy process to upgrade to the 27mb storage 1.11 ROM version but it can be done.
THe reason why you dont get a ROM version when running MaUpgradeUT_NOID is because your device should be in bootloadrer mode when running this and therefore can not read the ROM version. But the upgrade will still work.

wheres the link of these files needed for us to upgrade?
and what shud we donwload??

all files are located in the xda-developers ftp..........

WGonzales[dC said:
]wheres the link of these files needed for us to upgrade?
and what shud we donwload??
Click to expand...
Click to collapse
Here are the all the files that you guys are going to need for ROM Upgrade and Anansky 27mb Storage Mod.
FOR ROM UPGRADE
WWE QTEK S100 V1.11 ROM - http://forum.xda-developers.com/viewtopic.php?t=19932 (read the first post, download the zip.)
MaUpgradeUt_noID.exe - ftp://xda:[email protected]/Magician/MaUpgradeUt_noID.exe
WinRAR - http://www.rarlab.com/rar/wrar342.exe
READ the link http://forum.xda-developers.com/viewtopic.php?t=19932 but here is a simple walkthrough..
Make sure battery in Magician is charged and your computer is stable
Unzip the MA_Dangaard_WWE_11100_129_11100_Ship.zip
1) Use WinRAR to extract the WWE_11100xxxxx.exe (all files) to a folder,
2) Copy MaUpgradeUt_noID.exe to that folder.
3) Get Magician to bootloader mode (Camera button+ Power button +reset button), disable USB in Activesync (connection settings).
4) Plug Magician to USB cable (the magician should say USB v1.0 on the screen).
5) Now run MaUpgradeUt_noID.exe, and click next to update ROM.
6) Wait until upgrade is complete (approx. 15-20 mins) then soft reset (via reset button)
Optional 27mb Storage
Anasky big storage - ftp://xda:[email protected]/Magician/anansky/magician_os1.11wwe_bigstorage_6.zip
Ntrw.exe - ftp://xda:[email protected]/Magician/ntrw.exe
Hexeditor - ftp://xda:[email protected]/Magician/Backup tools1/hexedfull.exe
Romupdate.exe - ftp://xda:[email protected]/Magician/Backup_tools/romupdate.exe
Procedure.doc - ftp://xda:[email protected]/Magician/Backup tools1/Procedure.doc
This mod is not as simple as ROM upgrade so read this thread for more information about this Mod.
http://forum.xda-developers.com/viewtopic.php?t=20043

"WWE QTEK S100 V1.11 ROM - http://forum.xda-developers.com/viewtopic.php?t=19932 (read the first post, download the zip.) "
i couldn't d/l the file from the first post. Can i get this from other websites?
thanks!

Nutdhanai said:
WGonzales[dC said:
]wheres the link of these files needed for us to upgrade?
and what shud we donwload??
Click to expand...
Click to collapse
Here are the all the files that you guys are going to need for ROM Upgrade and Anansky 27mb Storage Mod.
FOR ROM UPGRADE
WWE QTEK S100 V1.11 ROM - http://forum.xda-developers.com/viewtopic.php?t=19932 (read the first post, download the zip.)
MaUpgradeUt_noID.exe - ftp://xda:[email protected]a-developers.com/Magician/MaUpgradeUt_noID.exe
WinRAR - http://www.rarlab.com/rar/wrar342.exe
READ the link http://forum.xda-developers.com/viewtopic.php?t=19932 but here is a simple walkthrough..
Make sure battery in Magician is charged and your computer is stable
Unzip the MA_Dangaard_WWE_11100_129_11100_Ship.zip
1) Use WinRAR to extract the WWE_11100xxxxx.exe (all files) to a folder,
2) Copy MaUpgradeUt_noID.exe to that folder.
3) Get Magician to bootloader mode (Camera button+ Power button +reset button), disable USB in Activesync (connection settings).
4) Plug Magician to USB cable (the magician should say USB v1.0 on the screen).
5) Now run MaUpgradeUt_noID.exe, and click next to update ROM.
6) Wait until upgrade is complete (approx. 15-20 mins) then soft reset (via reset button)
Optional 27mb Storage
Anasky big storage - ftp://xda:[email protected]/Magician/anansky/magician_os1.11wwe_bigstorage_6.zip
Ntrw.exe - ftp://xda:[email protected]/Magician/ntrw.exe
Hexeditor - ftp://xda:[email protected]/Magician/Backup tools1/hexedfull.exe
Romupdate.exe - ftp://xda:[email protected]/Magician/Backup_tools/romupdate.exe
Procedure.doc - ftp://xda:[email protected]/Magician/Backup tools1/Procedure.doc
This mod is not as simple as ROM upgrade so read this thread for more information about this Mod.
http://forum.xda-developers.com/viewtopic.php?t=20043
Click to expand...
Click to collapse
finally suceeded...

Damn66
Please let us know if you have noticed any bugs/problems after upgrade.

upgrading confusion

hello,
i read so many posts on this site, that it's starting to confuse newbies.
I have a German MDA Compact, and would like to flash it with a WWE rom.
Now, i've seen some ppl suggest to use "devicedata.exe" and change the bat file etc...procedure. While others say to unzip the "upgrade.exe" and run "MaUpgradeUt_noID.exe".
Which procedure do i need to follow in order to upgrade my Mdac?
Also, which ROM image do you suggest?
thanks for your support!

I agree, totally clueless and have read so many posts and now totally confused.
Can any patient person give us a straight and simple explanation of ROM upgrading? Which ones to use, what to watch out for etc. I'm sure there's lots of people who have the same questions but don't ask.
Many thanks in advance for anyone can help.

Finally someone asks!
I upgraded my German MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130 and everything works fine right now (it was an upgrade from T-mobile).
I would like to upgrade to the 1.11 WWE Rom version and also the bigstorage version without extended ROM, but I'm afraid dong that.
Anybody experience with that?
Andre

Hello to all,
can you share me that: MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130
Thank you

John,
Normally if you get the official release from dangaard telecom, it's just an EXE file that you have to run and everything works fine.
If you get a country id error, then you need to download the MAupgrade_noid and you have to unzip the EXE file in the same folder as the MAupgrade_NOID.
Then in stead of BAUpgrade, you have to run MAupgrade_NOID

Hi there,
I uploaded my upgrade file to 1.06 German T-mobile (no simlock) to the ftp site. This works fine for my MDA Compact
MA_TMDE_10601_130_10500_Ship
See it here.
ftp://ftp.xda-developers.com/Uploads/Magician/
Andre

If its simply a MDA to MDA ROM update, you should be able to simply run the file and that should work fine, however if its a Imate / qtek / MDA German to MDA Compact its tricky stuff, but can be done.
If you are able to get hold of the required rom, you will need to extract its files and install the upgrade executable file.... easy isnt it
Ok here it goes
1. Download the Rom file
2. Right click and extract to a named folder
3. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade if you were an imate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the xda developers site.
4. Once you have this maup....noid file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In activesync, click on file and connection settings and untick the USB connection.
6. Connect the phone to the USB, and run the maupdateut_noid,
7. The upgrade wizard wil start, go through a few checks then eventually come up with the coutry Id error.
8. Run the maupgradeut_noid file again and this time it should allow you to run the wizard.
9. The process should then go through 3 stages which should last about 10 - 15 minutes.
10. When finished you should get the upgrade successful notification and a prompt to reset the device
11. Hope that helps.
12. Rgds

I like others have been confused by all the different methods and possibilities for ROM changes. I particularly am interested in the BIG ROM upgrade that gives you 27Mb more free space. However, the threads on that subject are very long and reading all the posts is confusing.
It would be great if we had a FAQ that could be a Sticky at the top of the forum. I am sure its a lot of work to compile the FAQ but it would be sad to see all the hard work in these forums not get fully utilised.
I would be hugely grateful if there was document that summarised the best methods for ROM upgrades.

on the ftp site, you need to download the procedure document, that explains everything
hth
jim

thanks a lot to all of you guys for helping me out!
this is exactly what this forum is about.

ftp
Hi, All my first post here, How do we get acess to the ftp site for the instruction to the 27 meg bigrom when i try to go to ftp it won't get me inn.
Thanks
Domingo

Help: My German O2 Mini dead

Dear all expert,
While trying to flash my German Black O2 mini from Ger to ENG. (Using MAupgrade_noID)
After some steps, the o2 mini turn black and display
"Serial V1.02"
At this time, even though I softreset or hardreset the device,
the same wording also appear and can't further boot.
I even use SD card method but the same wording still appear again.
Can any expert teach me how to rescure my device?
Thanks

Are you sure you did the SD-method right?
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available. Now do the following:
Get ntrw from this site
Get a 512 MB SD-card (maybe a 128 MB one will work, too, but I am unsure about this).
Put ntrw into C:\
Extract the RAR into C:\, which should produce C:\11301bs.nb1
Enter the following into the command line at C:\:
Code:
ntrw write 11301bs.nb1 [your SD-card drive letter, e.g. I:]
, ignore error messages
Fully load your Magician!
Disconnect your Magician from anything, especially USB
Shutdown your Magician (press power button)
Put the SD-card into the Magician
Put Magician into Bootloader-Mode (Camera+Power+Reset at once, until you have the "Serial 1.02" screen w/o backlight)
Wait some seconds for "Press power to flash" to show on screen. Do just that.
This might just work.

Thanks KK.
What's wrong is that, it seem the bootloader is dead.
WHile I input the SD card while enter into the bootloader.
The screen still display "serial V1.02" and hold it.
No further wording like "Press power to flash it" etc.
Is it the bootloader is dead?

I do not think so. Make sure you shut down the Magician before placing the SD-card with a fresh ROM-image written to it into your device. Power on into Bootloader-Mode afterwards.
Another option to check your loader is the following:
Shutdown the Magician
Go into Bootloader-Mode
Wait for "Serial 1.02" to be displayed
Connect to PC via USB. The Bootloader should display "USB" shortly after connecting. If it does not: Maybe really you managed to kill your loader.
What exactly did you do? I used the NOID-Tool too, and had absolutely no problems with it. Besides: I also have a bootloader version 1.02.

kk
While plugging the usb cable to the device , yes, it show "USB" on the screen then.
However, when I use the romupdate.exe and try extract the rom into SD card at this time. After pressing "d2s" , the device shut down at once. No words appear on the screen.
Do you know what does it mean?
Besides, can you tell me what is "NOID-Tool" ?
thanks

The NOID-Tool would be MAupgrade_noID, which you used.
I am not sure about it, but as your device does not boot into the OS anymore, it seems reasonable to assume, that the ROM in your device is not valid anymore, due to errors while flashing it in the first place.
So - if there is no valid ROM, there is nothing, which the bootloader can write onto the SD-card.
Please try the method suggested in previous postings before anything else. If all this fails, I have no further suggestions - your device might really be dead.

You can try regular upgrade insted of doing it through SD card.
Danload shipROM, extract it and use MAupgradeNOID to run ROM and that is all you should do.

kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M

kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M

Hi there!
The FTP-master kindly converted the file to ZIP format. It is now available here: ftp://xda:[email protected]/Magician/BigStorage_ROMs/DE_T-Mobile_1.13.01.zip.
Remember: I used a 512 MB SD-card to create it, so maybe it won't work with smaller ones (but I think it should, since the ROM stored within this SD-card-image is no more than 64 MB in size).

Hi KK,
I found it along with the other BS roms and feel ashamed I couldn't find them. I tried it first with my 512MB card, but the cardreader won't write the file (no question about formatting whatsoever). Tomorrow I'm going to try with my 256MB mini SD card, which I know will be written by NTRW. I'll let you if I succeeded.
Regards, M

It works for sure with my 512 MB Kingston SD-card!
Don't bother about an error at the end of the ntrw-writing process. That's absolutely normal, since it would like to make the SD-card-drive the current drive, which is not possible after the writing process, as the SD-card now contains a ROM-image instead of a valid filesystem.

Hi KK,
Didn't manage to get it flashing. I used both cards but my magician doesn't accept the image somehow. No sign of any message like 'press power to load', not on serial nor on usb connection in the bootloader. It did work before with my own dumped rom, but lost the storage than, but it did accept the rom. Now it keeps awful quiet, I copied the first bytes and all, so maybe I'll give it a try with another rom. I want to sort this problem out.
Cheers, M

nbfdec made my big storage
Hello KK,
Yesterday I tried with the steps from hlt, out of the radio 1.13 upgrade thread http://forum.xda-developers.com/viewtopic.php?t=32274. It doesn't involve any rom dumping or sd-card action whatsoever and it worked first time.Just one tool: nbfdec and a shipped rom. It is fast and simple. Thanks for your advices, hope others will try this method as well, because it is much easier than bigstorager and bytecopy etc.
M

The "no SD-card required"-method in this thread only works for shipped ROMs. The ROM i prepared is a combination of the latest german OS & Radio versions plus BigStorage, which is to my knowledge _not_ available in this combination elsewhere, and should therefore be the most up-to-date ROM usable for any german magician user with very few simple steps.
Since you require a non-german version, my ROM will not be appropriate for you, but this thread started out with a cry for help with a non-booting magician, and I thought, that my ROM-modification would be of some help here due to the simplicity in applying it and its actuality.
But be it as it may.

KK,
I had the same problem as Netmon, only bootloader and I couldn't make the sd flash. That's why I was looking for a decent rom. With the tooling found on this site I probably could turn my magacian from German to English again. Since all my storage was gone I could take the risc.
I solved my problem with the upgrade 1.13 thread and that method would have worked for Netmon to I guess, just put the magacian in bootloader connect to usb and flash with a German shipped rom or an altered version.
Anyway thanks for your time, M

Dear rilazi and all
The device has been proofed for dead by the manufacturer.
The symptom is
1) romupdate.exe can't detect the device
2) press softreset button can't reboot the device to normal screen, only display "Serial V1.02" on the screen
3) Use SD card method doesn't got any respone from the device, keep displaying "Serial V1.02"
4) Use shipped rom (with MaupgradeNo_id.exe) also can't detect the device.
I don't know whether it the V1.02 version of bootloader problem or not.
Before, I try to flash many time which it V1.01 with no problem.
So, all of the V1.02 German device (Black color Mini) should pay attention to it.

I have a bootloader v1.02, too. Absolutely no problems with flashing on my side.

Upgrade??bigStorage??extROM??help....noobie

1) Problem:
was running on 1.11 with extROM 1.03, wanted to upgrade to TMO 1.13 but there was a country id error.....so i did a hard reset and reset again b4 it run the autoconfig thing. then the extROM folder came up(which i think is the bigStorage thingy) and no more extROM. tried the upgrade again but same result...so i ran the cab files or watever u call those in the extROM folder 1 by 1. some of which i think was needed for my mini to run w/o any problem.....now extROM back running on 1.11. So how do i upgrade.
2) Queries:
if i were to clear the extROM folder by copying them into my PC/thumbdrive/CD(for safekeeping,in case something bad happens), then copy the important ones into my SD card and run them...can my mini still work?
Been playin around a little but still need a lot more to learn. Can some1 please educate me.
Thanx in advance.

hi,
There are two main thread's about upgrading to tmo 1.13
- upgrading to radio 1.13...
- tmo official 1.13...
You can find all the needed info there including a BS 1.13 rom available at the ftp & a patched shipped-rom also available on the ftp
Cheers, M

How to get a Kaiser to display Chinese ?

Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.

Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760

Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too

you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn

well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support

1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)

Thank you very much.
I'm now downloading and trying the ways you pointed out.

Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again

ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.

jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.

This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here

ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster

I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.

Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx

mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing

Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx

White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx

mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.

Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx

RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx