ROM 1.06.116WWE - JAM, MDA Compact, S100 Software Upgrading

this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip

Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers

has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu

A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116

actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)

...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz

Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !

taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz

Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!

Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.

We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...

it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André

sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?

Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((

BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).

landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!

Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks

macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe

Related

German HTC Magician/MDA Compact ROM 1.13.00/1.13.129/1.12.00

New German HTC Magician/MDA Compact rom have been uploaded to Magician section on FTP.
ftp://xda:[email protected]/Magician/Shipped_ROMS/
Enjoy
Does anyone have access to windowsmobile.it?
http://www.windowsmobile.it/
05.010.2005
Available new ROM for Qtek S100
E' available in the area of download upgrade of the device new ROM for the Qtek S100. optimizes the operation of the Bluetooth of the camera and installs one new version of client the MMS. has been dawns to you, moreover, the driver of the panel touch screen and has been improved the translation of the error messages. The possessory ones of the Qtek S100 can unload the modernization after to have carried out the authentication from
___________________________________________________________
Can someone check qtek.nl for new ROM also?
Moved the files in the "Fixed" part of the ftp.....
Where have you found this ROM? A short look at the t-mobile page didn't show any news about this ROM.....
Have you noticed any improvements of the ROM?
By the way:
Do you now a way to mount the Extended ROM -File under linux?
Stefan
You can cut header from decrypted ms_.nbf file and mount it as disk image.
http://www.t-mobile.de/business/blackberry/software/1,7968,11445-_,00.html
@LumpiStefan:
http://www.t-mobile.de/downloads/blackberry/ma_tmde_11301_129_11200_ship.exe
http://www.t-mobile.de/business/blackberry/software
;-)
calvinandhobbes said:
@LumpiStefan:
http://www.t-mobile.de/downloads/blackberry/ma_tmde_11301_129_11200_ship.exe
http://www.t-mobile.de/business/blackberry/software
;-)
Click to expand...
Click to collapse
But the issue here is Blackberry. This isn't a ROM upgrade, is it???
This is a ROM update package.
Any ideas what actually happens to the rom?
Extrom looks to me like blueberry is integrated; seems to be settings for austria though. Confirmations on that?
Greetings
i just installed the new rom... works fine so far... but i'm missing something.
if a gprs connection is established, than there is no disconnect button... is there a trick to get this button back?
@tko
to sort out that problem i once found the following :
Orange_GPRS_Desconnect.sa
It`s a .cab file, once installed the disconnect works fine again!
Greetings
download here:
nice thax
This ROM upgrade works fine for me too. But I haven't installed anything from the Ext_ROM yet (on purpose).
works also quite nicely on my device, i only installed the new Camera Program from the Ext Rom, nothin' else.
BigStorage
Anybody tried to apply the BigStorage Hack with this BB-Update ?
Cheers
hrb
@hrb: You're probably unable to read... so no further sense in making it any clearer for you WITH WORDS.

New TMO Official ROM - (1.13)

Seems like T-Mobile have brought out their second maintanance release, supposedly including blackberry (jumps up and down, then realises blackberry is overhyped and overpriced).
Downloading it now from
http://t-mobile.iris-global.com/download_manager_mda_com.html
From the filename it appears the radio stack is still at 1.12, but I'll check once it's on.
Apologies if this is old news but I couldn't find any reference to it so far.
Technology hates me
Computer decided to reboot during ROM flash, feck knows why. Luckily it seems the TMO upgrade utility can restart its flashing procedure even though connection was lost.
Don't mind computer problems if they got some kind of sense to them, but randomly just restarting for the first time since I built it during the most ackward time just proves to me that computers are both evil and have a since of twisted irony.
Any improvement
Any improvement in this release?
I have been using the May update (BigStorage applied) since July fairly successfully.
I don't want to go through this if it's not worth it, so would appreciate advice from anyone who has applied it first.
Thanks
Well it's now got Blackberry support, whoopty f***in do. Also the radio version is still 1.12 so that has to be updated seperatly. In the 15min its been alive I havn't noticed any major changes but never really expected to.
Will post if I experience any problems or notice anything lifechangingly amazing about this new ROM. Would be nice if people using this ROM could do the same.
BTW anybody got a list of the ExtROM files and their comparitve uselessness? I went through the 1.12 ROM with a CAB manager but really can't be arsed this time round. Probably just install the whole lot through shear laziness. On second thoughts the BB client takes up 1.3Mb, so like f**k am i letting that onto my baby.
Hi Herman,
Why not go for BigStorage as you're not using the ext-rom. In the upgrade to radio 1.13 you can find how to do it from the shipped rom & on the ftp there's a bs 1.13 rom present, based on the Dutch TMO version so WWE, but use your own ext-rom files for specific UK settings.
Cheers, M
Cheers
Sorry, didn't really put it right. Already had the 1.13 radio downloaded and just installed it after, was no worries there. As for the BigStorage ROM, I've never particularly liked the idea, especially after reading problems people have had reverting back to the old storage configuration. I'm quite happy with my 512Mb SD card, wouldn't really use the extra space in storage anyway.
Cheers for your thoughts though mate
Ps had the new ROM up and running for few hours now, not noticed any glaring issues apart from that damn lack of BT serial ports issue but thats the radio not the OS ROM.
BigStorage
Finally gave in and overcame my fears. Applied the BigStorage hack to the latest TMO ROM as I read on here that it's reversible. Well seemed to have gone smoothly, although the increased hard reset time at the begining nearly made my heart stop.
If anyone wants I can upload the latest TMO official ship (1.13) with BigStorage hack, which doesn't need the SD card flashing method. Can do straight over USB.
Just post a msg if you want me to upload.
herman3101 said:
Seems like T-Mobile have brought out their second maintanance release, supposedly including blackberry (jumps up and down, then realises blackberry is overhyped and overpriced).
Downloading it now from
http://t-mobile.iris-global.com/download_manager_mda_com.html
From the filename it appears the radio stack is still at 1.12, but I'll check once it's on.
Apologies if this is old news but I couldn't find any reference to it so far.
Click to expand...
Click to collapse
that doesn't work with my jam ... i still can't figure out how to update my ROM.
Re: BigStorage
herman3101 said:
Finally gave in and overcame my fears. Applied the BigStorage hack to the latest TMO ROM as I read on here that it's reversible. Well seemed to have gone smoothly, although the increased hard reset time at the begining nearly made my heart stop.
If anyone wants I can upload the latest TMO official ship (1.13) with BigStorage hack, which doesn't need the SD card flashing method. Can do straight over USB.
Just post a msg if you want me to upload.
Click to expand...
Click to collapse
i would love to have that...right now im experimenting some of the roms thats available. i would like to give it a try. please upload it here or on the ftp. thanks mate.
One thing, this EXT ROM is 1.13 128 while NL EXT 113 ROM is 131. Which one we should use??
Re: BigStorage
parklife said:
i would love to have that...right now im experimenting some of the roms thats available. i would like to give it a try. please upload it here or on the ftp. thanks mate.
Click to expand...
Click to collapse
Hi parklife,
Still strugling to get it done? I gues herman3101 will upload a modified nk.nbf. Hope you succeed with it. At least I did with a patched nk.nbf. Can't upload myself for a few days as I'm not in the neighborhood of my PC. It's just me & my magician and I'm not complaining.
Cheers, M
Uploading now
Well I'm uploading the ROM up to the ftp now. I've included the updated nk.nbf as well as all the files needed to do a USB install. The files were small enough for me to think well why not. Once that's been uploaded I'll check the download section and find a link for you all.
Further to the guy who couldn't update his ROM, being kinda vague there buddy but I'll see what I can do. If you would be so kind as to follow these instructions pretty much to the letter then we should be OK:
- Hard Reset your MDA (press power button at same time as reset)
- After the selecting your time zone do a soft reset to avoid the customization process
- Plug your fresh MDA into your USB and wait for ActiveSync to bring up the connection wizard, select Guest partnership
- With your MDA still plugged in but in Guest mode just double click on the file you downloaded of T-Mobile and follow the onscreen instructions.
If you still have problems after following those steps then don't hesitate to reply but please be more specific so we don't have to guess what your issue is.
Will post a message when the BS ROM is up on the ftp
PS Well with the BigStorage ROM it obviously doesn't matter which ExtROM, but I would always go for the one from your provider so if you are with T-Mobile UK then go for their ExtROM because your guarenteed compatibility
Link to the ROM
ftp://xda:[email protected]/Uploads/Magician/WWE_TMO_1.13 Official Release with BS.zip
ftp://xda:[email protected]/Uploads/Magician/
The first is a direct link which probably won't wok because of the way I named the file and the second is a link to the folder which it is in.
I have to be honest I have no idea how to move this ROM into it's appropriate folder under Magician/BigStorage ROMs but o well. You'll find it where I've specified.
BTW the file attached is a list of my interpretations of what the 1.13 ExtROM files do. By no means conclusive or correct, its just what I've noticed them do during a stage by stage install and looking for clues inside the cabs.
herman3101,
Album & camera are bundled in the cab. That's the only flaw I noticed in your nice description.
Probably a moderator will move your file to the download section. Guess that's what happened to my BS rom as well. Thanks for uploading your files. It takes me ages to upload those files with my magician.
Good work & seems you're right on my track with decisions making for BS. Only I messed my first try completely and that's something I'm not wishing to anyone. Just waiting for the first hard-reset to finish is enough I think.
Regards, M
Re: BigStorage
oltp said:
Hi parklife,
Still strugling to get it done? I gues herman3101 will upload a modified nk.nbf. Hope you succeed with it. At least I did with a patched nk.nbf. Can't upload myself for a few days as I'm not in the neighborhood of my PC. It's just me & my magician and I'm not complaining.
Cheers, M
Click to expand...
Click to collapse
oltp, i tried your ROM, everything works fine, but it seems the clock stuck on 24 hour format, usually i can change it into 12 format just like i want it, but the Dutch ROM seems did not offer 12 hour format. But i trully appriciate your time and effort fot uploading the ROM
thanks oltp.
Re: Uploading now
herman3101 said:
- Hard Reset your MDA (press power button at same time as reset)
- After the selecting your time zone do a soft reset to avoid the customization process
- Plug your fresh MDA into your USB and wait for ActiveSync to bring up the connection wizard, select Guest partnership
- With your MDA still plugged in but in Guest mode just double click on the file you downloaded of T-Mobile and follow the onscreen instructions.
Click to expand...
Click to collapse
hey herman, thanks for the upload, i got it to work on my M500. But i would like to add something on the set up. You need to do some extra steps to avoid the the ID ERROR 120. Ok here ya go:
-Extract the rom
-edit the RUU.conf with notepad, add [CHECKCEID_TYPE]=1 on the top
-copy MaUpgradeUt_noID.exe from ftp to the extract folder
-press power, camera and rest on your magician
-plug the magician to the USB
-AND execute the MaUpgradeUt_noID.exe
-follow instuction
I waited for 4 minutes till i got my welcome mode.
for more info go check on the ampda how to's pdf file
thanks for herman3101, oltp, and ampda, now i have the perfect rom that i will keep for some time.
Hey Parklife,
Glad you finally made it. Don't think the Dutch rom is any different from the UK rom, both are 1.13 WWE TMO. Except for the ext-rom ofcourse. Managed to get my time on 'h:mm am' too with the english (us) region.
Good thing is that everyone can choose of three methods, to get this BS rom, whichever way they're feeling most comfortable ith and that has been different before.
Cheers to all of you.
Re: Uploading now
parklife said:
hey herman, thanks for the upload, i got it to work on my M500. But i would like to add something on the set up. You need to do some extra steps to avoid the the ID ERROR 120. Ok here ya go:
Click to expand...
Click to collapse
Cheers for complementing the post, didn't include it because my MDA is from TMO UK so I don't need to do that step.
PS I've been running the ROM for a little while now and it seems as stable as ever
hey, one more question for you guys...after i install the Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB, my magician clock changed into 24 hours clock format. I tried to change it into 12 hours format on regional setting - date like oltp said, but could not change it back to the 12 hours format...have you guys had the same problem? no biggies, i just not use to the format.
Parklife,
I noticed that the clock changes only after I alter the 'time style' on the time tab (sample changes immediately) go to another tab and then touch the clock on my programbar. Changing the region seems not necessary. Yesterday I fiddled a bit with the settings, now I used a more structural approach.
Cheers, M

Few question about upgrading W2K3 to W2K5

i've heard that WM2003 in himalaya gadget can be uprade to WM2005, it's very interesting and i going to try the uprade, but i have some question about the upgrade, my question is:
1. what's the risk during upgrading? could my device occuring some permanent error?
2. what's the consequence of this? will my device working slower? or working faster?
3. if i don't satisfy with the WM2005 can i downgrade back to the WM2003 OS?
please help me by answering my question
Response:
1. the device may fail, but you can restart the whole process entering the device in bootloader mode and upgrading (happen to me once)
2.Your device will work Faster but sometimes (at boot sequence) will be slower.
that's the price you have to pay. Other thing is there is no MMS in WM5 (dont work for me) and some camera issues, that can be fixed. But is more eye-candy than the WM2003 or 2003SE.
3. If you aint satisfied you can go back to 2003SE just putting the device in bootloader mode and then making the upgrade using a WM2003 ROM (the nbf file)
One thing: Tofclock and Buzz (thanks guys!) are working hard to bring us one stable, better and faster WM5 ROM, so be quiet and wait like me :wink:
Hi guys,
I ve also heard that after you upgrade to Wm 5.0 the phone vibratin wont work, is that true?
what else then?
:roll:
Thanks
Hi dickyw,
my vibration on my Himalaya works perfect...
Hi Guys,
Can anyone help another dumb newbie?
I upgraded my Himalaya to W2k5 OK from the O2 exe file, but I now want to downgrade to 2003 SE.
The folder I am trying to use to downgrade is WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip
Himaupgradeut.exe gives:- Error 120 Country ID error 1-1-8-n-1
HimaupgradeUt_noid.exe gives:- Error 103 ROM image file not found
XDA image tool gives me:-Unsupported file format error for NK.nbf
I have:-
Boot loader 1.06
CE image 1.72.00
Extended image 1.72.181
Radio image 1.17.00
Am I using the wrong tools, the wrong ROM or an incorrect procedure? I'm doing this for a friend so it's getting very embarassing. Any advice would be gratefully appreciated.
Thanks, Mike
Another issue to aware of when upgrading to WM5 is that you need to also upgrade to Activesync 4.1 as 3.8 won't work any more. Given that AS can be very tempremental it may take some time to get the sync link back up and working to your satisfaction so if your data is cruitial to your work then backup, backup, backup and upgrade when you have a few days free to dedicate to ironing out any wrinkles.
Then also xbackup doesn't work in WM5 so you are left with options like buying the latest Sprint backup soiftware (now WM5 compatible) or relying upon your PC Outlook to be your "backup data" (NB I use the Outlook free "backup" util to back up my pst files on exiting Outlook as double insurance).
Regards - Mallow1
PS I upgraded and v glad I did. Had a few AS issues but eventuall got there (took a lot of reading of forums and As battles, but worth it in the end)
cnimike,
One assumes that you have unzipped the zip file first before trying to reflash? If not try that (say use winzip). Also try reading the wiki as a guide to what to do (seee link attop left of page).
You are also best o use the HimaupgradeUt_noid.exe as at least it avoids the first error (esle you'll have to edit the flash files first and recompile them which is straight forward but if you are a noobie it's a step that can be avoided by using the "...noid.exe") and if you haven't unzipped the said file doing that may well sort out your second error.
Get back to me if you need more help.
Regards - Mallow1
cnimike said:
The folder I am trying to use to downgrade is WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip
Am I using the wrong tools, the wrong ROM or an incorrect procedure? I'm doing this for a friend so it's getting very embarassing. Any advice would be gratefully appreciated.
Thanks, Mike
Click to expand...
Click to collapse
I would suggest getting a hold of Sin's merged version (details in signature) or XDA2JoJo's version. Simply flash the ROM and you are there. Elsewhere, SIN has set out the steps in the most detailed fashion you are going to see outside a software manufacturer's manual. :wink:

ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR

When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent
Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M
Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears
I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M
Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards
The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???
Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M
Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update
I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M
Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english
Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M
thanx
Ok thanks a lot
regards

Always bootloader screen

Hi, I've a vodefone v1240 (HTC Tornado), i've tried to flash wm6 flash to it... but... i haven't super cid unlock... the flash is ok but phone always star in muticolor screen (botloader screen), i've tried to flash a lot of flashes but always get invalid vendor id or "only upgrade"... i've tried too with TyphoonNbfTool to edit nbf and change vendor id.. but always get the same mensaje ("invalid vendor id" or "only upgrade")...
How can i recover my phone? :S
Thanks
Sendoa
Determine your original CID first, to do this type:
Code:
info 2
into mtty or teratermpro and paste the output in the thread
Phil
Ahh, there you are ! Are you or duke_Stix still planning to cook some newer ROMs or remove bugs from the existing one ? We hardly see you guys around there days
i get this... what is the original CID? ¿?
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3CE40000 Bytes
HTCSVODA0504 㱍dHTCE
Cmd>
@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Changelog:
HTC Task Manager inc
HTC File Manager inc
Application Unlocked
Fixed WiFi
HTC Comm Manager inc
Removed Wireless Manager
Removed Debug Apps
Removed Marketplace
Removed Office
Removed Voice Command,
Removed Windows Update,
Added Bluetooth DUN support for TomTom compatibility
Added Bluetooth FTP protocol
Extra's (as a separate download)
Office
MMS (semi working)
HTC Clear Storage
Jeodek Java
Button fixes
xT9 (for those who prefer it over standard T9)
xT9 lang packs (split into separate languages)
TCPMP
wm5torage
VoIp
Localisations:
Polish
Czech
Russian
However at the moment I'm having issues with initflashfiles.dat, once these are sorted, it will probably be released the same day.
Back to the topic:
Ok, using typhoonnbftool v0.41 open up a tornado nbf (wm6 or official, it doesnt matter) and then edit the header data so that the Operator field reads:
Code:
VODA0504
That is your original CID
Then save the nbf and flash it to your device
Phil
done but...
Hi, i've done but... always get a "only upgrade"... only let me to reflash wm6 flash.. but it always return to bootloader screen :S what am i doing wrong? :S
Thanks anyway
Sendoa
Try adjusting the version numbers to something ridiculous like 99.99.99.99 as well
Phil
jm012a9749 said:
@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Phil
Click to expand...
Click to collapse
Hey Phil, Thanks very much for the update ! Your hard work is much appreciated here !!
Me too
I'm having the same problem as Sendoa. I flashed the WM6 ROM to my 8310but after 100% completion, the phone re-started in bootloader mode.
I can flash it again with the WM6 but the same thing happens each time (bootloader mode). I've tried to flash with several other ROMs but each time I get the "Invalid Vendor ID" error before flashing begins.
I've tried the Typhoonnbftool tool to change the header as suggested earlier in this thread but without any success. My CID is 'DNG_0501'. I'm still stuck in bootloader mode.
I'd appreciate any assistance.
Thanks,
Straker.
Sorted
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.
Solved
Thanks to all
I flash it with a cingular flash with version changed to 79.79.79.79 and operator changed to VODA0504, and work again.. then i've unlock the cid and flash wm6 flash and it is working with it
Thanks again
Wow, that's cool, means I can flash my phone to WM6 without voiding my warranty ( I still got 5 months left )
lomanasq said:
Here, here they are:
cancer awareness ribbon
Click to expand...
Click to collapse
ban this MOTHA F**&&
Straker said:
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.
Click to expand...
Click to collapse
where did you get your flash from?
typhoonnbftool is creating only 1kb file of nk.nbf
Hi,
I have the new typhoonnbftool got it from sourceforge when i try to edit headers of a Imate rom to make it for xpa swisscom v1240 with the CID "VODA0505" i get only 1kb nbf file i try lots of thinks but no luck at all.
kind regards
Fakbrenjeri
Similar problem
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?
Small nbf
Straker,
Where did you get the rom that worked?
timwb said:
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?
Click to expand...
Click to collapse
use typhoon tools 0.4.1...
ftp://ftp.xda-developers.com/Uploads/Smartphone/Tornado/Shipped_Complete_Updates/I-mate
use the rom from here..
Stuck on BootLoader
I there!
I've tried everything that I could find here and still no luck...:-\
I've an SPV C600 and when I upload the Imate ROM it stays stuck on the BootLoader.
It only works if I upload the Orange Upgrade ROM...
I can't SuperCID it, since no app as worked till now...
What can I do?
Thank you!
try this:
http://forum.xda-developers.com/showthread.php?t=285344

Categories

Resources