help me pleaseeeeeeeeeeee!!!!!!!!!!!!!!!!!!!!!!!!! - General Topics

Hello, I have a PDA Eten glofiish M810, and I have a problem now will explain it to what is
success. While performing a ROM upgrade a few days ago, the update
that fails and the PDA connected to your PC, turn off the display (display neroooo).
I try to restart it, removing battery but nothing, the buttons light up
normally but display BLACK. What the hell happened?
So I do try as hard reset, power + soft reset (anything), power + soft
reset + cam (nothing) etc etc. .... but I feel lots of hard reset the PDA is restarted
(I notice the buttons that will go off) but the display is always black. Provo
directly to install a ROM Journal (ps. when I connect the PDA to the PC, the
PC sees me quietly MS Active Sync works normally) but the bar
Progressive does not go forward remains at 0%, nothing!
I followed instructions .... Power + rec (no red button on the camera) and then go with
the pen .... for many seconds? 1 made 5 made 10 made 1 minutes did take off .....
the stylus, Dividend fingers .... NOTHING! but a screen comes out .... kind of testing
normalemte touchabile (1 for CPU, RAM 2 ....) but it is a screen type under
screen "in the sense that it is difficult to see it ... in fact I could normally
viewed over a light projected on the screen .... trying and trying again
(power-rec and stylus) screen testing no longer appears but the logo now appears
Glofish (always under the screen and view it through projected light) ... but after
ten seconds disappears ...
I upgraded directly from SD. but the result is always the same.
I know some of you help?
HELP MEEEEEEEEEEEEEEEEEEEEEEEEE pleaseeeeeeeeeeeeeeeeee !!!!!!!!!!!!!!!!!

marco221186 said:
Hello, I have a PDA Eten glofiish M810, and I have a problem now will explain it to what is
success. While performing a ROM upgrade a few days ago, the update
that fails and the PDA connected to your PC, turn off the display (display neroooo).
I try to restart it, removing battery but nothing, the buttons light up
normally but display BLACK. What the hell happened?
So I do try as hard reset, power + soft reset (anything), power + soft
reset + cam (nothing) etc etc. .... but I feel lots of hard reset the PDA is restarted
(I notice the buttons that will go off) but the display is always black. Provo
directly to install a ROM Journal (ps. when I connect the PDA to the PC, the
PC sees me quietly MS Active Sync works normally) but the bar
Progressive does not go forward remains at 0%, nothing!
I followed instructions .... Power + rec (no red button on the camera) and then go with
the pen .... for many seconds? 1 made 5 made 10 made 1 minutes did take off .....
the stylus, Dividend fingers .... NOTHING! but a screen comes out .... kind of testing
normalemte touchabile (1 for CPU, RAM 2 ....) but it is a screen type under
screen "in the sense that it is difficult to see it ... in fact I could normally
viewed over a light projected on the screen .... trying and trying again
(power-rec and stylus) screen testing no longer appears but the logo now appears
Glofish (always under the screen and view it through projected light) ... but after
ten seconds disappears ...
I upgraded directly from SD. but the result is always the same.
I know some of you help?
HELP MEEEEEEEEEEEEEEEEEEEEEEEEE pleaseeeeeeeeeeeeeeeeee !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hi am very sorry about ur device but am sure it can be fixed I dont own a device like that I have a HTC prophet but you have to post this question in the same place you read about upgrading your device am sure they have recovery steps can u post the link were u got the files and instructions to update ur device? thanks al look into it and see if there is a solution or not but you should try to hardspl your device and flash again but if ur pc cant find the device try this go to active sync settings and uncheck allow usb connections the pc should find the device also try to download the original rom for your device you can find it at the manufacture site in the download section try flashing it to your device it should help.
if not let me know and plz post the link you got everything from ok

marco221186 said:
Hello, I have a PDA Eten glofiish M810, and I have a problem now will explain it to what is
success. While performing a ROM upgrade a few days ago, the update
that fails and the PDA connected to your PC, turn off the display (display neroooo).
I try to restart it, removing battery but nothing, the buttons light up
normally but display BLACK. What the hell happened?
So I do try as hard reset, power + soft reset (anything), power + soft
reset + cam (nothing) etc etc. .... but I feel lots of hard reset the PDA is restarted
(I notice the buttons that will go off) but the display is always black. Provo
directly to install a ROM Journal (ps. when I connect the PDA to the PC, the
PC sees me quietly MS Active Sync works normally) but the bar
Progressive does not go forward remains at 0%, nothing!
I followed instructions .... Power + rec (no red button on the camera) and then go with
the pen .... for many seconds? 1 made 5 made 10 made 1 minutes did take off .....
the stylus, Dividend fingers .... NOTHING! but a screen comes out .... kind of testing
normalemte touchabile (1 for CPU, RAM 2 ....) but it is a screen type under
screen "in the sense that it is difficult to see it ... in fact I could normally
viewed over a light projected on the screen .... trying and trying again
(power-rec and stylus) screen testing no longer appears but the logo now appears
Glofish (always under the screen and view it through projected light) ... but after
ten seconds disappears ...
I upgraded directly from SD. but the result is always the same.
I know some of you help?
HELP MEEEEEEEEEEEEEEEEEEEEEEEEE pleaseeeeeeeeeeeeeeeeee !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Perhaps here is the right place to look:
http://www.eten-users.eu/index.php?showforum=42
Good luck,

orb3000 said:
Perhaps here is the right place to look:
http://www.eten-users.eu/index.php?showforum=42
Good luck,
Click to expand...
Click to collapse
You can try the solution given here http://www.eten-users.eu/index.php?showtopic=19398 and see if it works for you am still looking for others but again I sugest you post your question there since the members there know more about you device then us and can help you much faster too good luck
http://www.eten-users.eu/index.php?showtopic=19074 has some good information aswell

Related

Prophet Freez at startup...

Hello I have a very strange problem with my Prophet...
when I turn it on or do a soft-reset i must touch the display and move with the stylus on the Display all the boot-time when i donĀ“t do this my Prophet freeze at the Splash screen is that Normal ?
I have a xda Neo G4 with the Last Dopod Rom please help me anyone... sorry for my bad english and THANK YOU!!!
Did you make a HR?
Remember, you'll erase all your data. Remove the SD card and Press and hold the camara and common manager buttons at the same time, then put the stylus into the hold close to the USB connection. Still hold the mentioned button, when a dark screen become, it going to said to restore, push the green button you used to answer a call.
Your device become as factory.
cidriver said:
Did you make a HR?
Remember, you'll erase all your data. Remove the SD card and Press and hold the camara and common manager buttons at the same time, then put the stylus into the hold close to the USB connection. Still hold the mentioned button, when a dark screen become, it going to said to restore, push the green button you used to answer a call.
Your device become as factory.
Click to expand...
Click to collapse
i know how goes a hardreset Thank you no i will only know why this happens ?
I have the same problem. I only soft reset while on external power otherwise the system either hangs or I have to tap the screen often to keep it alive. I found no solution.
HELP!!!
Having the same problem here.
After hard or soft reset my prophet freezes on the screen with the spl/ipl info. This happend after I tried to install the AKU3.3.13.ASERG-us rom.
Tried everithing I know (which is not much in this area)
HELP
Try flashing with another ROM. Wm5 or wm6. We are plenty of alternatives.
reSpect
Just resetup ur Rom and other programs.... and make sure when u install any programs need to restart ur device that make restart ... and follow the steps step by step

interesting Problem.three color screen after every reboot.

I spilt some tea on my qtek s200 yesterday, and right after the spill, I unplugged the battery and dried it first with tissues and then a hair dryler .It seeed ok for a while but now I have a strange problem.Whenever I softreset the device, it sticks on the three color screen.
Softreset doesn't work at this stage so I try to hardreset the device.After I press camera+comm man+reset buttons, there is a confirmation message and then I press "yes", this is where,I think, the problem is; I can't get a format completed message and after this stage the device boots up normally.
After the spill, the camera button started to act weirdly. I open the camera app and try to shoot a photo by pressing the camera button but it doesn't react but whenever a turnoff the screen with the power button and on again it shoots a photo.
May be there is still some parts that need to be dried,so shall I dismantle it and take a look inside
If you have an idea, please have me informed.
Thanks.
To sum up the problem:
whenever I try to hardreset my ppc, it performs as a soft reset ,so,I cannot hardreset the device.
Help me please...
I wonder if one of the buttons (the camera button probably) is stuck. That would explain the entering bootloader and the inability to take a picture.
If you can get the device to boot up properly, in the settings under "System" there should be a "Clear Storage" program, that will allow you to do the same as a hard reset.
I tried that "clear storage" but that didn't work, all the same.Maybe you are right.Because when the bootloader screen came up, I tired to hardreset again,this time just pressing the comm manager button and reset the device with the stylus and it tried to hardreset but again was unable to do it.
So,i think, I should find a way to prevent the camera button from keeping pressed steadily.
Do you have an idea?
more likely the camera button have short circuited..
do u use usb cable to connect with pc .. if yes then after 3 color screen try to connect it and look if u see text at bottom left "usb" .. if its all true u can flash your ram
@sahir74,
When I connect the device on the three-color screen with the usb cable,i can see the "usb" on the bottom left.
I have no issues upgrading my qtek s200 (prophet), but when I try to hardreset, I come across a problem like this,or whenever I softreset the device, it doesn't normally boot up and just sticks at three-color screen.
Do you think a surgery can fix this problem?I am thinking about opening the device and doing something about the camera button.
All the problem arose when eye spilled a glass of tea on my s200 ,which happened exactly where the camera button is.
What ROM have you upgraded to? and, what is your devices IPL/SPL?
If you tried an official WM5 NVID ROM, then I think taking it apart and checking the connections is the only option...
Shadow 2
and I tired other roms, it seems to be a hardware problem.Anywayapart from this problem, I am using my device happily though.

SPV M3100 frozen

I know this is a bit of an old phone now, but I'm hoping someone might be able to help...
When I switch the phone on, it gets to the Windows Mobile screen and then just hangs. After a few minutes, it turns itself off.
So far, I've tried the following;
1. Soft reset
2. Hard reset
3. Remove battery, put on charge (red light), replace battery (amber light), hard reset
4. Removed battery for 2 weeks
5. Praying
6. Swearing
Does anyone have any other suggestions?
Thx
Bad Flash
Hi
You could try starting the device in bootloader in order to re-flash the ROM, or flash a new ROM. Methods for this are:
1) Press the soft reset hole button whilst holding camera button fully in.
2) Remove the battery, then re-insert it and switch the device on by pressing the power button but again ensuring the camera button is depressed fully.
3) Remove the battery and re-insert it. Don't switch the device on but plug it into a Windows PC using a USB cable whilst, you guessed it, depressing the camera button.
If you can get into bootloader (three coloured screen with some yellow writing) then you can probably reflash the device. It sounds like a software problem not a hardware problem but I could be wrong on that.
If you can't get the device into bootloader mode you have a problem that is more complicated to fix, about which I can't advice.
Best wishes
andrew-in-woking
For info
Check out these definitions:
http://forum.xda-developers.com/showthread.php?t=319077
http://forum.xda-developers.com/showthread.php?t=356299
http://forum.xda-developers.com/showthread.php?t=273831
Awaiting an update!
Cheers
andrew-in-woking
Hi,
Thanks for the reply....I couldn't get your method to bring up the bootloader to work, but tried pressing Power and OK while doing a soft reset.
This brought up a screen with 4 horizontal bars - red, green blue & white. Text at the top says;
HERM100 (text in white)
IPL-1.01
HERM100 (text in yellow)
SPL-1.04
In the white bar is the word 'Serial'
Does this sound right?
Then it just hangs on this screen - is there something else I am supposed press on the phone, or do I do something via my laptop with activesync etc?
Sorry for the additional questions, but I've never had to do this before.
Thanks
An update....
After noticing that 'No GSM' appears on the splash screen, I have now found this page which I think might answer my questions.
I'll have a go at this tonight
Reposted in the Hermes thread

Serious boot-problem - HTC HD2

Hi,
I got my HTC HD2 only a couple of weeks ago, and I already got a problem with it
The thing is, that I can't boot it up properly; when pressing the "Turn on/Turn off/hang up"-buttom, it boots by comin' up with the white screen with the green "HTC"-logo in the middle and some system information in the left buttom.
Afterwards the animation with "quietly brilliant" comes up and the Windows logo with the orange background comes up - and then it turns off and boots up again.
I've tried to...
* reset it (not hard reset - I have some contacts that I don't wanna loose).
* charge it up (I can, when the windows-logo appears, see, that the battery's full)
* pull out the battery for several hours
Please help - I'm very sad about that I used tons of money on a device, that now won't work.
Is there any way, where I can solve the problem without loosing all my contacts?
I did it!
Ok, found out that all my contacts were synch'ed with my gmail.
I hard-resetted it, and it works now.
Thanks for your help
Lol well done!
For people that dont have push/exchange contacts etc, always backup using myphone, spb, sprite or other software.
Cant tell you enough how important it is to back up, unless you like loosing everything right?
Greetz.
Boot problem..
Hello there,
I bought my HTC HD2 like 2 months ago, and the first two days it froze like thrice !
Now, suddenly i find it turned off then when i try to boot it up, it get stuck on the white screen with the green "htc" and information in red to the bottom left. It hangs there!
It did later show the following black screen with white text:
"The device is unable to boot because either you have turned off the device incorrectly or tired to install an application from untrusted source. Press Volume Up to reset your decice or press any other button to cancel. This operation will delete all your personal data and restore the device to it's factory settings"
but the thing is, i can't press anything at this stage, nothing happens....
I did try to hardware reset, charge, remove battery and put back, etc..
areej said:
Hello there,
I bought my HTC HD2 like 2 months ago, and the first two days it froze like thrice !
Now, suddenly i find it turned off then when i try to boot it up, it get stuck on the white screen with the green "htc" and information in red to the bottom left. It hangs there!
It did later show the following black screen with white text:
"The device is unable to boot because either you have turned off the device incorrectly or tired to install an application from untrusted source. Press Volume Up to reset your decice or press any other button to cancel. This operation will delete all your personal data and restore the device to it's factory settings"
but the thing is, i can't press anything at this stage, nothing happens....
I did try to hardware reset, charge, remove battery and put back, etc..
Click to expand...
Click to collapse
You tried:
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If that dont work try flashing a new rom using mtty.
If that still doesnt work I would expect it to be a hardware problem, i would send it back to htc or if without warranty take it to a Phoneshop (or open yourself), probably a wires loose or something.
Thank you for replying... but sadly no, it didn't work
I do have warranty, ill take care of that..
Thank you again.
did hard reset and returned to factory settings. all my installed applications were lost. pity.
All I wanted is to install the @#$%% russian keyboard!
ALWAYS backup first. Simple.
I am having the same issue. Nothing has been installed as far as App's go. This is straight out of the box.
Boot Screen
R 2.10.50.26
G 15.39.50.07U
D 2.13.90963 8G
I have been able to Boot it to the home screen once. But the battery is Low and When I connect it, it locks
Things done -
Hard Reset up+down+end
up
up
Battery pull
Removed SD and SIM and turned on
None have effect
Idea's ?
I have the same issue. Phone Just out of the box I can't start it. It started once but crashed, I removed battery and is gone.
Now it remains frozen with white screen and htc logo.
I tried everything reset, hard reset, all things now is charging the battery for 4 hr. Crappy phone or software.
What to do??
ktod_16 said:
I have the same issue. Phone Just out of the box I can't start it. It started once but crashed, I removed battery and is gone.
Now it remains frozen with white screen and htc logo.
I tried everything reset, hard reset, all things now is charging the battery for 4 hr. Crappy phone or software.
What to do??
Click to expand...
Click to collapse
If its brand new out of the box, id take it back and get a different one. If its second hand, see if you can get into bootloader. If you can you can then flash a stock htc rom, if not its back to the shop.
Dark Ninja said:
You tried:
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If that dont work try flashing a new rom using mtty.
If that still doesnt work I would expect it to be a hardware problem, i would send it back to htc or if without warranty take it to a Phoneshop (or open yourself), probably a wires loose or something.
Click to expand...
Click to collapse
hey can wires be the reason that hd2 cant boot up.shows green boot logo but no system information at boot and stucks there only tried every thing hard reset,custom rom,stock rom,mitty,sd method rom install..every thing...
i have the same problem But how i can Backup when phone is turned off

HTC Diamond 2 Stuck at welcome screen

Guys,
I am really in a fix. It seems my HTC Diamond 2 is stuck at the first screen (all black with HTC written in grey). I cant access my phone book and the operations are extremely slow. I have tried doing the soft restart by pressing button next to the stylus. Please help. Also as yo may have guessed I am extremely basic in my knowledge of technical stuff so please try to keep it as basic as possible. Any Kind of Help will be appreciated.
I guess you could start off with taking out your battery... But I guess you already did that?
Same Issue
Hi, I'm having the same problem described above, but worse. I have an HTC Diamond 2. It stays at the logo screen (black screen with HTC letters in white). It doesn't pass anywhere from there. I've tried using the reset button on the back near stylus, tried the hard reset (Vol Up/Down + Power key) but it doesn't respond. There's an option that "works": If I press the 'call' key + power button, it shows an update menu with the following: 1. Update Logo 2. Update OS 3. Update Eboot 4. Format User Space 5. Return; none work except for the format user space option, but it does nothing.
I've tried also from the PC but it doesn't recognize the device via USB. I downloaded Active Sync, and an update wizard from HTC.com but still no success in recognizing the device.
Please help me, I need this phone to keep working, I don't know what triggered the problem..

Categories

Resources