Hello everyone,
I have a problem with my imate jam. When I soft rest the device it shows a screen with Serial ( V1.0 ).. and nothing happens... I don't see any progress !
then, and in order to turn on the device again, I have to take off the back cover and place it again and then press on the power button. Then, when I start the device, it goes all the way with a loading process until it shuts off by itself. for no reason. any ideas what's going on ?
one more info. I tried to update the ROM, using imate website. I downloaded the latest version available in their website, but the phone turned off in the middle of the update process, and showed USB V1.0 on the screen.
Need Help !!!
Related
I have a Black O2mini with Chinese ROM, after Upgrading to WWE, soft reset, the screen shows only white with sound "ting" like hardreset sound. It still boot but does not show on the screen. Connected to PC and I can explore my device.
Upgrade again is not be able with caution "Checking the information on your device ... please wait.... " But I wait for a long time ...
Anybody has the same problem and how to solve it? Thanks
have a Black O2mini with Chinese ROM, after Upgrading to WWE, soft reset, the screen shows only white with sound "ting" like hardreset sound. It still boot but does not show on the screen. Connected to PC and I can explore my device.
Upgrade again is not be able with caution "Checking the information on your device ... please wait.... " But I wait for a long time ...
Anybody has the same problem and how to solve it? Thanks
??????????????????????????????????????????////
Hi - Okay, having installed active sync 4.1 I ran the ROM updater (JAMin_WWE_213923_2139123_022021_shi).. at 95% the PC crashed. This has left the phone in a complete mess. All I have is a screen with a red, green and blue horizontal bands.
On the screen it says RUU - IPL 1.00 - SPL2.13
I can't seem to reset the phone.
Can anyone help me sort this out?
Many thanks in advance.
Russell
UPdate problem fixed
Hi
Turned out that the screen described was the bootloader screen (I think).
I had to resart the PC to get rid of any open connections (error 260) and then run the ROM again. This connected and updated the phone despite the fact that active sync couldn't see the phone..
Phew, been a long day!!
Cheers Russell
Press reset button+camera button bootloader mode after load this rom
RUU_Prophet_220734_2207114_024721_NVID and enjoy it...
I have a Qtek S200 and have been using the Prophet_Orange_UK_Rom. I decided this morning to revery back to my initial upgrade PDAMobiz_Prophet_WM6_V1.00 Rom. However in the middle of the update process in step 2, something happened which caused the update to fail.
No my qtek starts and gets stuck on the boot screen where you see the orange logo and IPL, SPL etc... info. When I plug the usb cable, there's no message from my computer (and no ack from activesync) but the power led shows it's charging. Any ideas as to what I can do? I've tried hardware reset several times and after saying Format is completed!, I end up with the same stuck-up boot screen.
Thanks for your big help!
done it
sorry for the bother. Was doing hardware reset with both cam and comm buttons pressed. Did not know about boot reset with comm button only...
hi, may i know what you did after you went to bootloader?
my dopod 818pro just struck at the three color screen.
pls help.
I read Wiki, reflashed ROM. Now ok.
Greetings all !!!
I'm a windows mobile user....I'm using an htc p3600 trinity.
I've never had trouble updating my phone's rom, untill yesterday!!!
Usually i just connect the phone thru usb cable and use the Rom Update Utility.
But this time
I copied the 'SSPL-TRIN' file to the device and ran it from the phone.
Sadly it hanged at the red-blue-green screen. No matter how many times i tried resetting the phone(soft reset), it showed the same.
I then ran a working Rom Update Utility(RUU) and it showed the updating process from 1- 100 %.
After completion, it now shows the htc pic ( as it normally does when starting) and then it shows me only a white screen!!!
I've tried using RUU, but no use! The phone doesnt even detect up on the activesync (using win XP)
Plzzzzzz gimme advice bcos i love this phone and dont want to get another one!!!!!
If you can get to htc screen, then you can get into recovery console. Do that, then wipe data/factory reset. That should fix the problem.
Its been a while but it finally worked Alhamdulillah(praise to God)
All i needed was to get to the bootloader screen.
I installed windows mobile device center(previously known as activesync)
on my windows 7 .
I pressed and hold the 3 buttons shown in the pic attached, and it got me to
the bootloader screen( the one with red,green,blue bars).
Then i ran the official rom update for my htc p3600 (downloaded from htc's website).
And to God's grace, it started updating and i got back my phone.
If this post has helped anyone of you, plz click on 'thanks ' on this post!!
Any help on further explainations...contact or pm me!
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help?
The experts there may be able to help.
dark112 said:
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Click to expand...
Click to collapse
So, if anyone get blank screen, but not completly as mine, you can solve it like this. I noticed that a black contrast gets a little brighter sometimes. So, I entered recovery (using power + volume down) mode and noticed there is first brighter than darker blank, so i figured out that I entered recovery mode. Previously I plugged in phone in laptop and then deleted all my files on phone and sd card and only copy original rom that I have found on official SIngapore Phicomm page. Then I turned phone, entered recovery mode, then on blind, went on any kind of update (cause usually update is 2. and 3. option, internal and external, 1. is reboot now).
So I pressed down to pick that update (i guessed) and power and repeat it 2 more times and all I could see is blank. After some time, I saw a phicomm logo.. And reminder ** don't use any Phicomm update found on any internet page cause it's all wrong**
Later I have red that it have installed wrong kernel. I hope it will be at any help!