I have a Qtek S200 and have been using the Prophet_Orange_UK_Rom. I decided this morning to revery back to my initial upgrade PDAMobiz_Prophet_WM6_V1.00 Rom. However in the middle of the update process in step 2, something happened which caused the update to fail.
No my qtek starts and gets stuck on the boot screen where you see the orange logo and IPL, SPL etc... info. When I plug the usb cable, there's no message from my computer (and no ack from activesync) but the power led shows it's charging. Any ideas as to what I can do? I've tried hardware reset several times and after saying Format is completed!, I end up with the same stuck-up boot screen.
Thanks for your big help!
done it
sorry for the bother. Was doing hardware reset with both cam and comm buttons pressed. Did not know about boot reset with comm button only...
hi, may i know what you did after you went to bootloader?
my dopod 818pro just struck at the three color screen.
pls help.
I read Wiki, reflashed ROM. Now ok.
Related
I accidently flashed a wizard rom into my G4 prophet.
THought this can work or at least should abort but it didnt....
now the bootloader appears for 1 second ( the screen with the 3 colors) then immideatly turns off by itself. this happens all the time on off. the battery is charged so its not caused of the battery. is there any way to fix the bootloader ? the device restarts before the phone is recognized as usb. No update possbile by usb at this time.
alphazero said:
I accidently flashed a wizard rom into my G4 prophet.
THought this can work or at least should abort but it didnt....
now the bootloader appears for 1 second ( the screen with the 3 colors) then immideatly turns off by itself. this happens all the time on off. the battery is charged so its not caused of the battery. is there any way to fix the bootloader ? the device restarts before the phone is recognized as usb. No update possbile by usb at this time.
Click to expand...
Click to collapse
your phone is a G3?
g4
no its a g4 it turns on 1 second then bluetooth blue and orange led flashing 1 time then turns off
Jesteeeeeeeer =)
okay i put jesters g3 image to my sdcard now it asks me if i want to boot from sdcard. if i press yes it says:
No update allowed!
JEEEEEEEEEEESTEEEEEEEEER would a g4 image fix my problem ?
could any1 of u guys host or upload a g4 image of a prophet please.
you got a cid lock I guess you have to wait for the gold card project to work.
Stuck @ splash screen
I have the G3 version, I'm stuck at the Splash screen that displays the OS, GSM, etc version with the Qtek logo. Can any one provide assistance on hoe to het to the actual 3 color page (bootscreen) to reload the OS. PDAMobiz used to provided the page for the solution but since has been removed on the steps to get past this. PLase help
I have the same problem - screen is stuck at boot-screen and does not go any further... any way to load a new ROM from an SD card?
Hi fellas, I have a I-mate Jamin (Prophet) G4
While upgrading to RUU_Prophet_220734_22-7114_024721_NVID.exe, I lost ActiveSync synchronisation. This was while it was copying the extended ROM. Now when I did the hard reset, it only shows the Qtek splash screen and doesn't do anything else. Is there any way to rescue the XDA?
Thanks!
hi...
i faced the same problem before
you need to go to bootloaded mode (press camera button and soft reset)
you will get tri colour screen...
Flash again....
it will get stuck at 85% but wait for the 100% completion.
restart...
after some weeks of usage my tytn2 doesn't boot anymore.
after a soft reset the boot screen is the one with the ''rainbow'' (dunno the name) and, for a second, with the message ''no image file'' (or something like that).
I rebooted 5 times and now it's working.
what happened?
thanks for any hint
This is my first time (albeit, short time on this site) that I've seen this problem, sounds pretty rare. Hope someone can help you :\
woow...
have you tried to flash a new rom?
i am by no means a pro at this but if you are at the tri colored screen cant you just simply reflash?
MTTY
If you're getting stuck at the bootloader, then you'll more than likely need to search the forums for MTTY to download it and learn the proper commands to fix the issue. When it happened to me, I had to run the BOOT command and after it booted back up, I had to run HARDSPL again otherwise it would continue to go to the bootloader everytime I soft reset.
no way with mtty (can't connect... /me newbie)
I've discovered that a soft reset with usb (also ear mic) plugged into drives into a good boot.
without reveals the multicolor screen
I've now flashed hard-spl1 found here http://forum.xda-developers.com/showthread.php?t=334679 and I've tried to soft reset a lot of times.
result: always boot ok!
I hope this is the solution...
Hello again,
I been flashing ROMS for a while now but now I having some problems that I can't solve.
Since I installed the Laurentius26_KaiserDiamond_V10 I can't update the rom anymore. The Kaiser connects to the update, the update program confirms the connection (it checks if the battery is above 50%, confirm the previous fiirmware, etc.)
When the program shows the progress bar (On the PC) the kaiser screen blimp one time to the grey screen (the one with the progression bar) and turn back to three collors screen (in less than a second). After one or two minutes the program (on the PC) gives a erro message.
I have to reset the Kaiser but no ROM was installed
Does anyone know how to solve this problem? I'm using SPL 3.29 but I have already tried Hard SPL 3.28 and back to the 3.29 again.
Thanks
Hi there,
That happened to me too. What I had to do was to download the original rom from HTC and flash that. After, i did the usual: hard reset, remove batter, restart computer. Then I could flash
Michael
Diamond: dutty 1.8 full
Kaiser: Romeos 4.3
Check the link in My Sig.
Ta
Dave
I tried your sugestions. Tried to flash the original Orange ROM but had the same problem as the cooked ROMs. It stopped at the three colors screen.
I think myh problem is a little different from other cases here. My phone is working with the Rom it have right now. It only got stuck on the three color screen when trying to flash a new Rom. To remove the screen is just reset it (normal reset, no hard reset) and it goes back to 'normal' but with the old rom. Can't flash a new one
Also tried the mtty.exe method, but when I open the mtty it shows "CLIENT". If I push any key it shows one more "CLIENTE". after 34 "CLIENT" Messages (it shows "CLIENTCLIENTCLIENTCLIENT" it freezes...
Can someone help me please?
Thanks
Try flashing the new Hard SPL be cmonex.
http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave
Hi everybody!
Been searching for this problem on google and on this forum, but i can't find an answer to this
It's like this that i've installed wm 6.5 on my prophet, everthing was fine!
The problem was when i was trying to install another keyboard layout it restarted, and then it got stuck at the "splash screen" with the Qtek logo.
I did an Hard SPL, nothing happened.
After that i tried to boot into bootloader, everything was fine, i saw the three color screen and i started to install a new clean copy of the WM 6.5..
Everything was fine, it went to 100%, but when it was at 100% the device shutdowns.
When i tried to start it again i got into the three color screen again, and after about 7 seconds it restarts, and it starts in the three color screen...
Please help me..
Please... I really want my phone to get back to normal...?
try to connect the USB and run WM5 Rom.
The same problem..
I have the same problem after try to flash rom to my 818pro.It's still reboot into 3-color screen.How can I do??
Try flash this rom: RUU_Prophet_220734_2207114_024721_NVID.exe
from: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Michal