Hi everybody!
Been searching for this problem on google and on this forum, but i can't find an answer to this
It's like this that i've installed wm 6.5 on my prophet, everthing was fine!
The problem was when i was trying to install another keyboard layout it restarted, and then it got stuck at the "splash screen" with the Qtek logo.
I did an Hard SPL, nothing happened.
After that i tried to boot into bootloader, everything was fine, i saw the three color screen and i started to install a new clean copy of the WM 6.5..
Everything was fine, it went to 100%, but when it was at 100% the device shutdowns.
When i tried to start it again i got into the three color screen again, and after about 7 seconds it restarts, and it starts in the three color screen...
Please help me..
Please... I really want my phone to get back to normal...?
try to connect the USB and run WM5 Rom.
The same problem..
I have the same problem after try to flash rom to my 818pro.It's still reboot into 3-color screen.How can I do??
Try flash this rom: RUU_Prophet_220734_2207114_024721_NVID.exe
from: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Michal
Related
I have a Qtek S200 and have been using the Prophet_Orange_UK_Rom. I decided this morning to revery back to my initial upgrade PDAMobiz_Prophet_WM6_V1.00 Rom. However in the middle of the update process in step 2, something happened which caused the update to fail.
No my qtek starts and gets stuck on the boot screen where you see the orange logo and IPL, SPL etc... info. When I plug the usb cable, there's no message from my computer (and no ack from activesync) but the power led shows it's charging. Any ideas as to what I can do? I've tried hardware reset several times and after saying Format is completed!, I end up with the same stuck-up boot screen.
Thanks for your big help!
done it
sorry for the bother. Was doing hardware reset with both cam and comm buttons pressed. Did not know about boot reset with comm button only...
hi, may i know what you did after you went to bootloader?
my dopod 818pro just struck at the three color screen.
pls help.
I read Wiki, reflashed ROM. Now ok.
First it was spl 3.8. Was having trouble but could still work with the phone. Suddenly I became flashoholic. Just the same way as I flashed 50 times before, I was flashing. It all went ok. After that I'm stuck at the splash screen. Says, Format Failed. But can get into bootloader and flash roms. But that's all. No booting business.
Guess this is the end of the road, unless there is any solutiion. Any one out there?
IPL 2.20.001
SPL 3.08.001
Radio 2.47.21
OS 4.0.0.0.6 (was)
Now the mobiz step 1
i think i'm having a similiar problem with u..
flashed to SPL2.20. Everything ok..
after a few flashes, only thing i get now is the bootloader screen..
i can flash ROMs, RUU tells me its successful, but PDA just restarts and goes back to bootloader
Waaah :'( I have a most similar problem I was running pdaviet 4.0.0.6 Touch for almost 2 weeks now without a single glitch.. the phone fell on my carpet and went to bootloader screen and eversince then it has never recovered I tried a hard reset it didn't work when I was pressing the send button it did nothing I did some forum searches and tried putting back the nvid RUU and it said that the update was succesfull and the progress bar on the phone moved accordingly but it went back to the bootloader screen ... then I tried pdaviet temp rom that was in the package still no go I can tell it works somehow because the USB lights up in the bottom left when I plug the usb cable and the progress bar that moves, but I'm getting desperate IPL and SPL info is in my sig...
I can go into bootloader, flash any wm5 roms without IPL SPL. But that is all. Unless we can find a way to unlock the cid and flashback the original dopod rom, we are stuck.
anyone??? I cant use my phone at all now :'( and I didn't even re-flash it... all was working fine I just DROPPED it on a CARPET no real shock and since then it's on the bootloader screen
In my oppinion you have to send it for repair... I think it's really a phisical damage...
really no progress..
i opened a thread in the WM6 area also...
seems to be stucked at bootloader no matter what i do..
tried every single ROM, tried reflashing radio rom, tried reflashing ipl/spl, tried every RUU available..
when u guys hard reset, does it say Format is Failed ?
ice_mouton, i'm something like you.. dropped it few weeks ago.. but it still ran fine.. upgraded to PDAVIET's 4.0.0.0.6 Touch.. had no problems for the first few days of use... suddenly it refused to reset and was stuck at vendor boot screen...
after some weeks of usage my tytn2 doesn't boot anymore.
after a soft reset the boot screen is the one with the ''rainbow'' (dunno the name) and, for a second, with the message ''no image file'' (or something like that).
I rebooted 5 times and now it's working.
what happened?
thanks for any hint
This is my first time (albeit, short time on this site) that I've seen this problem, sounds pretty rare. Hope someone can help you :\
woow...
have you tried to flash a new rom?
i am by no means a pro at this but if you are at the tri colored screen cant you just simply reflash?
MTTY
If you're getting stuck at the bootloader, then you'll more than likely need to search the forums for MTTY to download it and learn the proper commands to fix the issue. When it happened to me, I had to run the BOOT command and after it booted back up, I had to run HARDSPL again otherwise it would continue to go to the bootloader everytime I soft reset.
no way with mtty (can't connect... /me newbie)
I've discovered that a soft reset with usb (also ear mic) plugged into drives into a good boot.
without reveals the multicolor screen
I've now flashed hard-spl1 found here http://forum.xda-developers.com/showthread.php?t=334679 and I've tried to soft reset a lot of times.
result: always boot ok!
I hope this is the solution...
Hello again,
I been flashing ROMS for a while now but now I having some problems that I can't solve.
Since I installed the Laurentius26_KaiserDiamond_V10 I can't update the rom anymore. The Kaiser connects to the update, the update program confirms the connection (it checks if the battery is above 50%, confirm the previous fiirmware, etc.)
When the program shows the progress bar (On the PC) the kaiser screen blimp one time to the grey screen (the one with the progression bar) and turn back to three collors screen (in less than a second). After one or two minutes the program (on the PC) gives a erro message.
I have to reset the Kaiser but no ROM was installed
Does anyone know how to solve this problem? I'm using SPL 3.29 but I have already tried Hard SPL 3.28 and back to the 3.29 again.
Thanks
Hi there,
That happened to me too. What I had to do was to download the original rom from HTC and flash that. After, i did the usual: hard reset, remove batter, restart computer. Then I could flash
Michael
Diamond: dutty 1.8 full
Kaiser: Romeos 4.3
Check the link in My Sig.
Ta
Dave
I tried your sugestions. Tried to flash the original Orange ROM but had the same problem as the cooked ROMs. It stopped at the three colors screen.
I think myh problem is a little different from other cases here. My phone is working with the Rom it have right now. It only got stuck on the three color screen when trying to flash a new Rom. To remove the screen is just reset it (normal reset, no hard reset) and it goes back to 'normal' but with the old rom. Can't flash a new one
Also tried the mtty.exe method, but when I open the mtty it shows "CLIENT". If I push any key it shows one more "CLIENTE". after 34 "CLIENT" Messages (it shows "CLIENTCLIENTCLIENTCLIENT" it freezes...
Can someone help me please?
Thanks
Try flashing the new Hard SPL be cmonex.
http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave
I own an Asus P320 WM6.1 device. In the morning, when I reset my phone, it got stuck at "welcome" screen. It just wouldn't start. I tried it several times and waited for a long time for it to load, but in vain.
I then though I might as well flash it as I had had the ROM I was using in my memory card(P320 WWE V4.15.0), but always got the "init sd download fail'. As the last resort, I thought of flashing it to WM6.5 ROM that I had used before. It flashed successfully, but now it gets stuck at the bootscreen, showing the version number. I tried flashing a couple of times with different WM6.5 P320 compatible ROMS(including hdubli's), but the result is the same.
Have I bricked my phone? My phone responds to soft reset on poke and all I can see is the asus bootscreen. Please help!!
sry my english its not so good , but have you reflash the original ?
You mean do a factory reset(cold boot)?
Well I cannot do that as I cannot start my phone. It gets stuck at the screen where it shows Asus logo with the version of the ROM currently in use. As stated before, I however tried to flash it using the latest WM6.1 ROM available on the Asus website(I had it in the root of my memory card), but got the problem of "init SD download fail".
What do I do??
Edit: I also tried hard reset. It asks me two options:
Press [Send] key to restore
Press [End] key to exit
When I press the send key(call button), I get the message "cold boot start". After a couple of seconds, the ROM version number overlaps this message, and it gets stuck.
Does no one have a solution for this? Please help. I am without a phone right now.