[Q] Please help!! - General Questions and Answers

I own an Asus P320 WM6.1 device. In the morning, when I reset my phone, it got stuck at "welcome" screen. It just wouldn't start. I tried it several times and waited for a long time for it to load, but in vain.
I then though I might as well flash it as I had had the ROM I was using in my memory card(P320 WWE V4.15.0), but always got the "init sd download fail'. As the last resort, I thought of flashing it to WM6.5 ROM that I had used before. It flashed successfully, but now it gets stuck at the bootscreen, showing the version number. I tried flashing a couple of times with different WM6.5 P320 compatible ROMS(including hdubli's), but the result is the same.
Have I bricked my phone? My phone responds to soft reset on poke and all I can see is the asus bootscreen. Please help!!

sry my english its not so good , but have you reflash the original ?

You mean do a factory reset(cold boot)?
Well I cannot do that as I cannot start my phone. It gets stuck at the screen where it shows Asus logo with the version of the ROM currently in use. As stated before, I however tried to flash it using the latest WM6.1 ROM available on the Asus website(I had it in the root of my memory card), but got the problem of "init SD download fail".
What do I do??
Edit: I also tried hard reset. It asks me two options:
Press [Send] key to restore
Press [End] key to exit
When I press the send key(call button), I get the message "cold boot start". After a couple of seconds, the ROM version number overlaps this message, and it gets stuck.

Does no one have a solution for this? Please help. I am without a phone right now.

Related

Dutty's DualTouch v3 Final: no more boot

after some weeks of usage my tytn2 doesn't boot anymore.
after a soft reset the boot screen is the one with the ''rainbow'' (dunno the name) and, for a second, with the message ''no image file'' (or something like that).
I rebooted 5 times and now it's working.
what happened?
thanks for any hint
This is my first time (albeit, short time on this site) that I've seen this problem, sounds pretty rare. Hope someone can help you :\
woow...
have you tried to flash a new rom?
i am by no means a pro at this but if you are at the tri colored screen cant you just simply reflash?
MTTY
If you're getting stuck at the bootloader, then you'll more than likely need to search the forums for MTTY to download it and learn the proper commands to fix the issue. When it happened to me, I had to run the BOOT command and after it booted back up, I had to run HARDSPL again otherwise it would continue to go to the bootloader everytime I soft reset.
no way with mtty (can't connect... /me newbie)
I've discovered that a soft reset with usb (also ear mic) plugged into drives into a good boot.
without reveals the multicolor screen
I've now flashed hard-spl1 found here http://forum.xda-developers.com/showthread.php?t=334679 and I've tried to soft reset a lot of times.
result: always boot ok!
I hope this is the solution...

Boot Problems, Restarts in 3 colorscreen!

Hi everybody!
Been searching for this problem on google and on this forum, but i can't find an answer to this
It's like this that i've installed wm 6.5 on my prophet, everthing was fine!
The problem was when i was trying to install another keyboard layout it restarted, and then it got stuck at the "splash screen" with the Qtek logo.
I did an Hard SPL, nothing happened.
After that i tried to boot into bootloader, everything was fine, i saw the three color screen and i started to install a new clean copy of the WM 6.5..
Everything was fine, it went to 100%, but when it was at 100% the device shutdowns.
When i tried to start it again i got into the three color screen again, and after about 7 seconds it restarts, and it starts in the three color screen...
Please help me..
Please... I really want my phone to get back to normal...?
try to connect the USB and run WM5 Rom.
The same problem..
I have the same problem after try to flash rom to my 818pro.It's still reboot into 3-color screen.How can I do??
Try flash this rom: RUU_Prophet_220734_2207114_024721_NVID.exe
from: http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Michal

My Phone is stuck at loading ...

Hello all,
Im in need of some help.
Earlier today I was taking a picture and the screen kind of stuck so I has to soft reboot it.
It didnt come back up. I was left at the rainbow bootloader screen.
I tried holding the camera button down and rebooting but it didnt change anything.
I tried several different combo's of holding keys down and rebooting and it always came back to that bootloader screen.
So the next thing I did was to format my cd card and downloaded KaisDiagTest1.zip and then coppied the KAISDIAG.NBH image file from the zip on to the root of the sd card.
That worked fine and I was left at a screen saying SPL 1.00.OliNex.
Next thing I did is were I think I screwed up. I flashed it with _ATT Tilt_RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign_22.45.88.07_1.27.14.09R2_Ship.exe which is the ROM from the HTC site and I think I was only supose to use a custom ROM and now after it finished flashing the ROM it rebooted and is stuck showing loading ... on the screen.
It goes past the boot loader and is stuck at loading...
Please advise if there is anything I can do.
Cheers,
Chris
I'd advise looking @ the sticky to which has a flashin for noobs & stuck in bootloader with many ways to fix it, along with more valuable info.
Any problems post in appropriate threads rather than starting new 99% is covered.
Thread closed.

[Q] Unable to format/wipe/reset nexus s

I have a nexus s i9023, it was running well with 2.3.4 for three months. Got an OTA update for 2.3.6 two days ago, installed it.Im running stock, and the root is locked.
Everything seemed to be running fine on 2.3.6 when last night it just stopped responding and freezing. Taking battery out doesnt help, it again freezes at the colorful x logo or at the unlock screen.
I read on how to do a reset, but pressing volume down and power button gives me only a flash of blacklight (for a millisecond) and then nothing happens. tried it many times. What am I doing wrong?
Pressing volume up and power button gives me a fastboot menu, and recovery mode only gives me an exclamation mark android, then I have to take battery out again. I cannot mount the sd card or do anything else.
Any help or solution is most appreciated guys. Salute.
When you get to recovery, press again power+volume up (i think so), and you'll get some options. You can make factory reset there (as i can remember).
Also, there are many guides here on how to root and flash custom recovery via fastboot.
Check this out: http://forum.xda-developers.com/showthread.php?t=1007782
Just follow it, and when you flash custom recovery, you will be able to mount SD card, flash any ROM etc...
Good luck ...
i have the exacly same problem and i already try full wipe, install other ROM like oxygen and i cant pass the main logo... it's frozing all the time and i need pick up the battery to turn it off... :S
someone can help?

HTC Touch Pro2, Bootloader Crashed?

Hi and please help as right now I dont even have a backup phone.
I tried to install android on my phone by following the procedure from here
http://forum.xda-developers.com/showthread.php?t=1566955
I copied RHODIMG.NBH and CM7****.zip in the root of the SD card and restarted my phone with vol -, went into bootloader and installed successfully, since then my phone starts with official HTC screen and then goes black. I tried installing it again couple of times and it ended successfully but still no progress but something happened.
Current Status of the phone.
1. I can get in bootloader with vol- key but it keeps saying no image found where as I have tried putting different RHODIMG.NBH of different ROMs, even stock rom too but it just not read it.
2. Phone starts, shows HTC logo and then black screen.
3. I was running a custom ROM before with Hard-SPL bootloader, so its not stock SPL.
Please help, I would greatly appreciate....

Categories

Resources