Hello all,
Im in need of some help.
Earlier today I was taking a picture and the screen kind of stuck so I has to soft reboot it.
It didnt come back up. I was left at the rainbow bootloader screen.
I tried holding the camera button down and rebooting but it didnt change anything.
I tried several different combo's of holding keys down and rebooting and it always came back to that bootloader screen.
So the next thing I did was to format my cd card and downloaded KaisDiagTest1.zip and then coppied the KAISDIAG.NBH image file from the zip on to the root of the sd card.
That worked fine and I was left at a screen saying SPL 1.00.OliNex.
Next thing I did is were I think I screwed up. I flashed it with _ATT Tilt_RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign_22.45.88.07_1.27.14.09R2_Ship.exe which is the ROM from the HTC site and I think I was only supose to use a custom ROM and now after it finished flashing the ROM it rebooted and is stuck showing loading ... on the screen.
It goes past the boot loader and is stuck at loading...
Please advise if there is anything I can do.
Cheers,
Chris
I'd advise looking @ the sticky to which has a flashin for noobs & stuck in bootloader with many ways to fix it, along with more valuable info.
Any problems post in appropriate threads rather than starting new 99% is covered.
Thread closed.
Related
PLEASE HELP.
i installed chucky droid rom on my htc hd2 and it wont bring the system up. it's just stucked on "loading please wait..." and that's it, my phone is ****in useless now. i had VBN and it worked fine. how the hell i get my phone now to the previous state?
i performed a hard reset too and it didnt do ****. PLEASE HELP
an update from me ... altho i managed to get the system up with booting from SD card, i still had that chuckydroid splash screen when booting. And then after first reset of the phone i got chuckydroid screen 'loading please wait' again and booting AGAIN stucked. So i booted again from the SD card and than i figured, as my phone ringed, that i cant hear who am i talking to. Just robo voice from the other side of the line. Ok, as im in the phone, i booted (using active sync) VBNDroid-Reloaded2Alt-21913-Oct08. it did his stuff and completed. Rebooted the phone and AGAIN there is chucky screen and AGAIN it's stucked.
it practically means that phone will boot only after 1st install. Next time i soft reset its blocked again.
What the hell should i do, how to remove that screen from blocking my phone ? Task 29 ?
update : i did task 29 ... didnt help, that chucky screen is on again after it rebooted and its still blocked.
Please post in the ROM thread. Likely to get more help.
Read the flashing instructions, before flashing.
On that note thread closed.
Please follow the rules.
Hi, I've got the HTC Touch Pro (Raphael)
And I've had it in my drawer for a while becuase it broke down one morning and I just bought a new one, But I'm thinking of sorting out the problems with it now since I need an extra phone.
The main problem with it is that it locks up in boot.
If I do a normal boot it locks at the HTC logo and the "friendly dinging sound"
I was thinking of reflashing it, but since it never boots up the only flashing I can think of is through the SD card.
So i put the file "RAPHIMG.nbh" in the root folder of my SD card and booted it up using the volume button pressed to looad the loader, it swaps over to a loading screen then it just freezes here aswell.
Any ideas on to WHY this happens and HOW to solve the issue.
issue solved, I managed to get the bootloader to get to waiting mode and cet a connection to it from my windows computer and run a default ROM onto it, now I can start modding it
i couldnt help but notice this thread, im am facing the same problem, except that my phone has never been flashed before, its fully stock. how did you manage to load a ROM beyond the "Loading..." screen. i have done exactly what several guides, including the ones i found in the forum, have told me to. Neither the SD card flash, nor the Activesync flash are working.. help please?
flashing
try tsis :http://forum.xda-developers.com/showthread.php?t=540290
I've tryed this on Touch Pro and it works , but do only the driver replace on windows......don't do task 29 or else .Instal the driver bring the phone into a bootloader and flash a stock rom...
hope it will do...
Hi and please help as right now I dont even have a backup phone.
I tried to install android on my phone by following the procedure from here
http://forum.xda-developers.com/showthread.php?t=1566955
I copied RHODIMG.NBH and CM7****.zip in the root of the SD card and restarted my phone with vol -, went into bootloader and installed successfully, since then my phone starts with official HTC screen and then goes black. I tried installing it again couple of times and it ended successfully but still no progress but something happened.
Current Status of the phone.
1. I can get in bootloader with vol- key but it keeps saying no image found where as I have tried putting different RHODIMG.NBH of different ROMs, even stock rom too but it just not read it.
2. Phone starts, shows HTC logo and then black screen.
3. I was running a custom ROM before with Hard-SPL bootloader, so its not stock SPL.
Please help, I would greatly appreciate....
I have looked at multiple guides on this and other sites, googled and tried stuff and I cannot resolve this problem. Hopefully I am posting in the right place.
I took the jump and unlocked the bootloader on my Moto G first generation, XT1034 successfully. I flashed TWRP 2.8.60.xt1034.zip with adb and this was successful. Then I flashed Super SU 4.6 Update and that was successful. I got into trouble I guess when I tried to flash Cyanogenmod 12.1 nightly. I used TWRP to flash via install. The flash had an error, which unfortunately I didn't write down. I believe it was something to do with a partition. However, it looked like the flash failed. At this point and for hours I have been trying to fix the "Warning Bootloader Unlocked Loop I am stuck in.
I have been able to get into the phone and flash via adb commands. I've tried several commands suggest to fix this that I have found in forums. I have tried flashing several recoveries including an older TWRP per the method in this thread, a clockworkmod - and the original 2.8.6.0.xt1034. When I get into the phone bootloader which is available, I have not been able to access any options in recovery. Pushing the power button on recovery leads to a blank screen sometimes followed by a recovery starting or a Motorola Logo starting up and a couple times a recovery. TWRP has started a couple times, but never gets past the intro screen, where it locks up. clockworkmod (clockworkmod-6.0.4.7-falcon.img started once after flashing through adb and gave me flash options. I tried to sideload, didn't understand, went back and the recovery locked up. These recoveries no longer load at all.
Through all of this the "Warning Bootloader Unlocked" logo screen comes up after plugging into the computer (Windows 8.1).
Example, I open the phone bootloader by waiting for the phone screen to go from the "Warning Bootloader Unlocked" screen to blank - it cycles from logo to blank. If I'm quick the phone and hard boot the phone will boot into bootloader. I connect to the laptop through USB. When I toggle to recovery and hit the power button the screen goes blank, the Motorola Logo pops up, goes blank and then the "Warning Bootloader Unlocked" appears. The Laptop then seems to connect and disconnect as the Warning screen comes on and turns off.
The factory selection just goes to a blank screen.
I would really appreciate some advice on how to get the phone back to a state in which I can work with it and try again. It is very difficult wading through all of the information out there. I've learned a lot through this issue, but can't take it any further.
Thanks, Jeff
Solved - Stuck in "Warning Bootloader Is Unlocked" Loop
This resolution took many hours to figure out, but I finally got there with this guide - http://forum.xda-developers.com/showthread.php?t=2542219, this thread - http://forum.xda-developers.com/showthread.php?p=54855457#post54855457 and this thread - http://forum.xda-developers.com/gen...e-firmware-t3042687/post59139823#post59139823.
I tried RSD Lite on different computers and USB cables I could not get the device recognized. So I ended up with the MfastbootV2 method to reload stock firmware, which I found on the firmware thread above - this was big, as my phone is with Wind Mobile in Canada and the link is the right one. The only thing I picked up from a different website was to use a computer with USB 2 ports. This is what I did, but I don't know one way or the other if USB 2 was needed. .
Can't thank you hard working guys enough for the time you take to put these threads together. I'm back up and running. As a bonus, after a big clean up in the process, my phone is running fast again.
Thanks everyone.
Hello, all. So, I messed up my H1711. I'm posting here because the forum for the phone is dead, and I'd like an answer of some sort.
Anyway, while trying to reset my device back to it's last .img twrp recovery, I deleted files I shouldn't have, and now the OS is just gone. I do still have the "Fastboot & Recovery Mode" screen. If I allow the phone to boot, it goes to a black screen that only has the three buttons on the bottom of the screen, "open apps, back, home". I don't know if I have the original recovery screen or not, but twrp is gone. It's been quite some time, and I don't remember what steps to take to get to flash a stock ROM or firmware. Can someone please please point me in the right direction? Thanks for your help.
Device: Huawei H1711 / Ascend XT2
**EDIT**I forgot to mention: Phone displays AT&T & Huawei screens without getting hung up at all. I did get stock recovery to load, it went straight to downloading an update, which stuck at 5% for about ten minutes before rebooting.