PLEASE HELP.
i installed chucky droid rom on my htc hd2 and it wont bring the system up. it's just stucked on "loading please wait..." and that's it, my phone is ****in useless now. i had VBN and it worked fine. how the hell i get my phone now to the previous state?
i performed a hard reset too and it didnt do ****. PLEASE HELP
an update from me ... altho i managed to get the system up with booting from SD card, i still had that chuckydroid splash screen when booting. And then after first reset of the phone i got chuckydroid screen 'loading please wait' again and booting AGAIN stucked. So i booted again from the SD card and than i figured, as my phone ringed, that i cant hear who am i talking to. Just robo voice from the other side of the line. Ok, as im in the phone, i booted (using active sync) VBNDroid-Reloaded2Alt-21913-Oct08. it did his stuff and completed. Rebooted the phone and AGAIN there is chucky screen and AGAIN it's stucked.
it practically means that phone will boot only after 1st install. Next time i soft reset its blocked again.
What the hell should i do, how to remove that screen from blocking my phone ? Task 29 ?
update : i did task 29 ... didnt help, that chucky screen is on again after it rebooted and its still blocked.
Please post in the ROM thread. Likely to get more help.
Read the flashing instructions, before flashing.
On that note thread closed.
Please follow the rules.
Related
Hello all,
Im in need of some help.
Earlier today I was taking a picture and the screen kind of stuck so I has to soft reboot it.
It didnt come back up. I was left at the rainbow bootloader screen.
I tried holding the camera button down and rebooting but it didnt change anything.
I tried several different combo's of holding keys down and rebooting and it always came back to that bootloader screen.
So the next thing I did was to format my cd card and downloaded KaisDiagTest1.zip and then coppied the KAISDIAG.NBH image file from the zip on to the root of the sd card.
That worked fine and I was left at a screen saying SPL 1.00.OliNex.
Next thing I did is were I think I screwed up. I flashed it with _ATT Tilt_RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign_22.45.88.07_1.27.14.09R2_Ship.exe which is the ROM from the HTC site and I think I was only supose to use a custom ROM and now after it finished flashing the ROM it rebooted and is stuck showing loading ... on the screen.
It goes past the boot loader and is stuck at loading...
Please advise if there is anything I can do.
Cheers,
Chris
I'd advise looking @ the sticky to which has a flashin for noobs & stuck in bootloader with many ways to fix it, along with more valuable info.
Any problems post in appropriate threads rather than starting new 99% is covered.
Thread closed.
hi friends,
please help me out,
i am not a tech geek, when i downloaded RUU from htcdev.com for android 4.0.x, and tried to update my firmware, the process is good at the go,
and while its in the process, a small hilarious shake at the USB port failed the further prigress.
now i couldnt start my phone, nor i could recover, HTC logo comes on flashing, and boot loader screen appers when loaded, but HTC screen green logo flashes again and again, whatever option you select, nothing worked, neither recover nor factory reset.
guys please help me,
its unlocked, s on.
i didnt do a backup either!!
please, thanks.....
aadivarma said:
hi friends,
please help me out,
i am not a tech geek, when i downloaded RUU from htcdev.com for android 4.0.x, and tried to update my firmware, the process is good at the go,
and while its in the process, a small hilarious shake at the USB port failed the further prigress.
now i couldnt start my phone, nor i could recover, HTC logo comes on flashing, and boot loader screen appers when loaded, but HTC screen green logo flashes again and again, whatever option you select, nothing worked, neither recover nor factory reset.
guys please help me,
its unlocked, s on.
i didnt do a backup either!!
please, thanks.....
Click to expand...
Click to collapse
I had the same problem with the flashing htc I unplugged battery and restarted and it worked again
HOWEVER
I've just done the update and mine is coming up with the htc quietly brilliant screen which also makes a noise and then nothing happens. Factory reset didnt work
Hi,
I am sorry but could someone help me pls
I am sure you have heard about CM lock screen stopped and phone boot looping.
I am pretty new to androids and only got my one+ a month ago , My phone has become useless , it keeps rebooting after the CM lock screen problem , after reading about it i went into recovery and wiped cache , media and everything and now the phone starts and ask me to choose language and after about 3 seconds the phone reboots again.
can someone please help me , i would be very grateful.
Have a good day.
This should potentially fix your problems
I am having problems with booting up my phone. This all started when i dropped my phone, the screen seems to be looking good, it is rooted with CyanModgen 10. So when i try to boot my phone it will only show me the HTC logo white screen for a few minutes and would automatically get off, i tried to do it a lot of times but the same thing would be showing up again. I have reset all of my data and then worked on it again but the same thing would be keep repeating again and again. Please if anybody would provide me some piece of advice i'll be glad to have it from you!! because that is the only phone i want to use!!!
Are you able to boot into bootloader or recovery?
Please help, ive read almost every post about this but none seems to work for me, i was on LEGORom, and today i decided to go back to 4.0.4, the susprise was when i got stuck on the M logo(the one with the waves) its moves three times and then i just see the M logo and nothing more, im able to get into fastboot, and conect to Rsdlite, i have flashed multiple times and the problem still there, also i did a factory reset via the stock recovery and the same issue, also i did the other method to flash the tom, and also to flash only the system and nothing seemed to work out.
Please i need some help.
Something that i notice watching the how to flash via rsd lite video on youtube is that my phone doesnt show up anything in the "device properities" part, is blank but that does not stop the flashing.
Thats everything that i did today, i hope someone can help me
edit1: on my pc it shows on devices properities all N/A but still the M logo stuck
Did you wipe everything before flashing?