Greetings all !!!
I'm a windows mobile user....I'm using an htc p3600 trinity.
I've never had trouble updating my phone's rom, untill yesterday!!!
Usually i just connect the phone thru usb cable and use the Rom Update Utility.
But this time
I copied the 'SSPL-TRIN' file to the device and ran it from the phone.
Sadly it hanged at the red-blue-green screen. No matter how many times i tried resetting the phone(soft reset), it showed the same.
I then ran a working Rom Update Utility(RUU) and it showed the updating process from 1- 100 %.
After completion, it now shows the htc pic ( as it normally does when starting) and then it shows me only a white screen!!!
I've tried using RUU, but no use! The phone doesnt even detect up on the activesync (using win XP)
Plzzzzzz gimme advice bcos i love this phone and dont want to get another one!!!!!
If you can get to htc screen, then you can get into recovery console. Do that, then wipe data/factory reset. That should fix the problem.
Its been a while but it finally worked Alhamdulillah(praise to God)
All i needed was to get to the bootloader screen.
I installed windows mobile device center(previously known as activesync)
on my windows 7 .
I pressed and hold the 3 buttons shown in the pic attached, and it got me to
the bootloader screen( the one with red,green,blue bars).
Then i ran the official rom update for my htc p3600 (downloaded from htc's website).
And to God's grace, it started updating and i got back my phone.
If this post has helped anyone of you, plz click on 'thanks ' on this post!!
Any help on further explainations...contact or pm me!
Related
hi all.a newbie to the pocket pc platform.when upgrading my xda2mini from r1.12 to r1.13. using various exe.methods(maupgrade.noid) as shown on this site and wiki.xda's.the exe progm seems to hanged after "checking info on phone.."stays that way even after 40-55mins(is this normal?) n now, everytime i switched on the phone,the new setup screen appears n after all the installations/customising of the phone,it reverts back to the bootloader screen.i have tried re/installing the rom several times n even trying the 'os1..shipped' but the whole process just repeats itself..Urgent advise please.. million thanks..
hi i haw such a problem. bricked my desire, and need anny suggestions :/
it happened when i tryed to push a custom framework-res.apk i did it by pushing it throu adb. it was this one "smooth-sense-1.0-1.0c.zip" from desire section. and im using "Official" Froyo HTC Sense ROM 1.0c.
after i pushed it to my desire i rebooted it and everything seemed to be ok. device loaded but when came the screen to unlock it had some google errors and restarted to load screen and booted again to lock screen and so on and so on.
so i decided to wipe all data and reinstall "Official" Froyo HTC Sense ROM 1.0c. so i did it. everything seemed to be ok, i restarted my device, it started o load, loaded to boot screen, but thats all.
so i tryed to reinstal the same rom and radio :/ when i tryed to install radio device just shuted down.
after that my desire dount even loud up to boot screen, it only turns on to white screen with HTC letters on it, and restarts.
when i turn it with volume down it turns on to recovery. when i pick up recovery and pres power button to select it it turns to that screen with red !, but when i try to turn on recovery menu from my pc with recovery-windows.bat nothing happens :/
so thats my big problem, maybe anyone could help me with it? :/
i mannaged to turn my desire back on. now it runs on android 2.1-update1 rom.
but now there is no network connection, no sd card connection and no usb connection. anny sollutions?
and one more thing. :/ i cant turn off my desire. when i turn it off, phone turns back on again :/ when conncted to usb.
sounds like you've done the USB brick. check out the thread at modaco for a solution.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
that might help you.
fixed damn it took some nerves
Hey everyone I am having some trouble with my friends HD2.
He installed HSPL3 with 2.08.hspl
Then Magldr 1.10
Then installed android 2.2 ROM
Everything worked fine, made phone calls, texts, all that except 3g didn't work but I am assuming that was because he didn't install a radio?
Now, heres where I am stuck.
He told me he used the phone for awhile without 3g.
Yesterday he turned off the phone before school and turned it on after school.
-The phone started to fail to boot up in multiple ways
-It sat at the stick together screen
-Got to MAGLDR 123456 go go go (would get stuck there sometimes)
-Got fully booted up and would search for a signal and freeze
-Or it would fully boot up and work normally until he had to restart it again
Now he told me this is what he did when he got home from school
-He opened magldr and did a usb flash
-opened bootloader and tried to reinstall android
-got two errors
-could no longer boot passed Magldr
I recommended he switched back to a shipped ROM from t-mobile it was the (3.14 update)
He told me he tried it, got to 8% and failed, and now he gets an error along the lines of:
-software update failed please try again
He gets that whenever the phone started up.
Now I said oh lord that sucks, now I have the phone.
-The phone is still on 2.08 hspl
-magldr 1.10 still installed
-Just did a USB flash
What do I do? I have tried looking at guides to install android but seeing as how there is no ROM on the phone anymore I can't do an SD install.
How do I tell if my phone is 512mb or 1024mb?
Is the phone bricked?
I currently have the Android 2.2 that my friend installed on the phone installed on this computer should I continue to use that?
recently bought an unlocked one X it was running the software number 1.85 and i was able to connect it to the pc to move my files to it ,
recently i got the ota update (2.20) and after quite a bit of research decided to let it update.
even after the update the usb feature worked, and now it doesnot work at all it only chages i have tried
holding the power button for 10 secs with phone connected to the lap,desktop, (when i did this the first time it the chhosing menu that appears on the phone showed up but the pc didnt recognise the phone)
tried different wires
checked coonect to pc settings ( set to always ask, disk drive)
installed latest drivers and htc sync
tried factory resets
unab;e to do hard reset for some reason (android logo doesnt show up) only the three lights keep blinking and go off
the phoe is fully stock and has never been rooted or flashed
all advice is much apreciated!
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help?
The experts there may be able to help.
dark112 said:
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Click to expand...
Click to collapse
So, if anyone get blank screen, but not completly as mine, you can solve it like this. I noticed that a black contrast gets a little brighter sometimes. So, I entered recovery (using power + volume down) mode and noticed there is first brighter than darker blank, so i figured out that I entered recovery mode. Previously I plugged in phone in laptop and then deleted all my files on phone and sd card and only copy original rom that I have found on official SIngapore Phicomm page. Then I turned phone, entered recovery mode, then on blind, went on any kind of update (cause usually update is 2. and 3. option, internal and external, 1. is reboot now).
So I pressed down to pick that update (i guessed) and power and repeat it 2 more times and all I could see is blank. After some time, I saw a phicomm logo.. And reminder ** don't use any Phicomm update found on any internet page cause it's all wrong**
Later I have red that it have installed wrong kernel. I hope it will be at any help!