hi all.a newbie to the pocket pc platform.when upgrading my xda2mini from r1.12 to r1.13. using various exe.methods(maupgrade.noid) as shown on this site and wiki.xda's.the exe progm seems to hanged after "checking info on phone.."stays that way even after 40-55mins(is this normal?) n now, everytime i switched on the phone,the new setup screen appears n after all the installations/customising of the phone,it reverts back to the bootloader screen.i have tried re/installing the rom several times n even trying the 'os1..shipped' but the whole process just repeats itself..Urgent advise please.. million thanks..
Related
Hello all,
Im in need of some help.
Earlier today I was taking a picture and the screen kind of stuck so I has to soft reboot it.
It didnt come back up. I was left at the rainbow bootloader screen.
I tried holding the camera button down and rebooting but it didnt change anything.
I tried several different combo's of holding keys down and rebooting and it always came back to that bootloader screen.
So the next thing I did was to format my cd card and downloaded KaisDiagTest1.zip and then coppied the KAISDIAG.NBH image file from the zip on to the root of the sd card.
That worked fine and I was left at a screen saying SPL 1.00.OliNex.
Next thing I did is were I think I screwed up. I flashed it with _ATT Tilt_RUU_Kaiser_CINGULAR_WWE_1.62.502.0_radio_sign_22.45.88.07_1.27.14.09R2_Ship.exe which is the ROM from the HTC site and I think I was only supose to use a custom ROM and now after it finished flashing the ROM it rebooted and is stuck showing loading ... on the screen.
It goes past the boot loader and is stuck at loading...
Please advise if there is anything I can do.
Cheers,
Chris
I'd advise looking @ the sticky to which has a flashin for noobs & stuck in bootloader with many ways to fix it, along with more valuable info.
Any problems post in appropriate threads rather than starting new 99% is covered.
Thread closed.
Greetings all !!!
I'm a windows mobile user....I'm using an htc p3600 trinity.
I've never had trouble updating my phone's rom, untill yesterday!!!
Usually i just connect the phone thru usb cable and use the Rom Update Utility.
But this time
I copied the 'SSPL-TRIN' file to the device and ran it from the phone.
Sadly it hanged at the red-blue-green screen. No matter how many times i tried resetting the phone(soft reset), it showed the same.
I then ran a working Rom Update Utility(RUU) and it showed the updating process from 1- 100 %.
After completion, it now shows the htc pic ( as it normally does when starting) and then it shows me only a white screen!!!
I've tried using RUU, but no use! The phone doesnt even detect up on the activesync (using win XP)
Plzzzzzz gimme advice bcos i love this phone and dont want to get another one!!!!!
If you can get to htc screen, then you can get into recovery console. Do that, then wipe data/factory reset. That should fix the problem.
Its been a while but it finally worked Alhamdulillah(praise to God)
All i needed was to get to the bootloader screen.
I installed windows mobile device center(previously known as activesync)
on my windows 7 .
I pressed and hold the 3 buttons shown in the pic attached, and it got me to
the bootloader screen( the one with red,green,blue bars).
Then i ran the official rom update for my htc p3600 (downloaded from htc's website).
And to God's grace, it started updating and i got back my phone.
If this post has helped anyone of you, plz click on 'thanks ' on this post!!
Any help on further explainations...contact or pm me!
I own an Asus P320 WM6.1 device. In the morning, when I reset my phone, it got stuck at "welcome" screen. It just wouldn't start. I tried it several times and waited for a long time for it to load, but in vain.
I then though I might as well flash it as I had had the ROM I was using in my memory card(P320 WWE V4.15.0), but always got the "init sd download fail'. As the last resort, I thought of flashing it to WM6.5 ROM that I had used before. It flashed successfully, but now it gets stuck at the bootscreen, showing the version number. I tried flashing a couple of times with different WM6.5 P320 compatible ROMS(including hdubli's), but the result is the same.
Have I bricked my phone? My phone responds to soft reset on poke and all I can see is the asus bootscreen. Please help!!
sry my english its not so good , but have you reflash the original ?
You mean do a factory reset(cold boot)?
Well I cannot do that as I cannot start my phone. It gets stuck at the screen where it shows Asus logo with the version of the ROM currently in use. As stated before, I however tried to flash it using the latest WM6.1 ROM available on the Asus website(I had it in the root of my memory card), but got the problem of "init SD download fail".
What do I do??
Edit: I also tried hard reset. It asks me two options:
Press [Send] key to restore
Press [End] key to exit
When I press the send key(call button), I get the message "cold boot start". After a couple of seconds, the ROM version number overlaps this message, and it gets stuck.
Does no one have a solution for this? Please help. I am without a phone right now.
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help?
The experts there may be able to help.
dark112 said:
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Click to expand...
Click to collapse
So, if anyone get blank screen, but not completly as mine, you can solve it like this. I noticed that a black contrast gets a little brighter sometimes. So, I entered recovery (using power + volume down) mode and noticed there is first brighter than darker blank, so i figured out that I entered recovery mode. Previously I plugged in phone in laptop and then deleted all my files on phone and sd card and only copy original rom that I have found on official SIngapore Phicomm page. Then I turned phone, entered recovery mode, then on blind, went on any kind of update (cause usually update is 2. and 3. option, internal and external, 1. is reboot now).
So I pressed down to pick that update (i guessed) and power and repeat it 2 more times and all I could see is blank. After some time, I saw a phicomm logo.. And reminder ** don't use any Phicomm update found on any internet page cause it's all wrong**
Later I have red that it have installed wrong kernel. I hope it will be at any help!
hi everyone. I have a china android mobile (VGO TEL VENTURE V 7). I was getting the error process com.android.systemui has stopped working. I tried everything to remove this error but no success.
So in the end i decided to again flash the ROM ( i have this mobiles ROM and i have flashed it before). this time when i flashed it and restarted device, it displayed vgo tel logo, screen remained on then turned off and then after few seconds it turned on and mobile went into recovery mode. Each time i turn on device this happens. there is no fault with hardware i have checked it.
I have the video link of what happens, recorded through laptop camera. since i am new so link posting isn't allowed for me. but i can send you the link if you want it...