Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help?
The experts there may be able to help.
dark112 said:
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Click to expand...
Click to collapse
So, if anyone get blank screen, but not completly as mine, you can solve it like this. I noticed that a black contrast gets a little brighter sometimes. So, I entered recovery (using power + volume down) mode and noticed there is first brighter than darker blank, so i figured out that I entered recovery mode. Previously I plugged in phone in laptop and then deleted all my files on phone and sd card and only copy original rom that I have found on official SIngapore Phicomm page. Then I turned phone, entered recovery mode, then on blind, went on any kind of update (cause usually update is 2. and 3. option, internal and external, 1. is reboot now).
So I pressed down to pick that update (i guessed) and power and repeat it 2 more times and all I could see is blank. After some time, I saw a phicomm logo.. And reminder ** don't use any Phicomm update found on any internet page cause it's all wrong**
Later I have red that it have installed wrong kernel. I hope it will be at any help!
Related
Hi there,
In total despair I am beggng for help... My Samsung seems wrecked but I can't find the right solution over here in my own country.
It does start in the download mode, and in the recovery mode.
It is extremely slow, and the S logo is broken into thousand pixels when starting. I've tried everything there was suggested but sofar no working Samsung.
When it is started after 10 min or so, it stays into Country selection and I can't touch anything, it doesn't respond.
When installing with odin, it does install the package, until media files copied, but it stucks into "can't access system/ csc/ KOR/ like that and the screen turns black,and it starts all over.
Is there somebody who can help me, anybody ??? I am not very technic and don't know very much about flashing, rebooting, etc.
Rebooting doesn't do much in recovery mode, it's still the same. please help.. I don't want to give up on my phone or is it dead ??
i have a tablet with a name oplus fab nova 3g. the manufucturer is said to be from the us.
now my problem occured last week as i was making a personalize theme for the tab. to make it more costumized i change font via font installer. the font ive used is not from font installer server. ive had change fonts for around 5 times without harm. now ive decided to rewrite the roboto for the keyboard. the font installer ask to boot. so i tap yes. now my tab booted only at the manufucturer logo. im rooted via framaroot. i am not a fan of custom roms so i dont do the stock rom backup. the tab got 2 bootups: recovery mode with fastboot mode, reboot mode, and recovery mpde options. ive tried the recpvery mode and it goes with manufucturer logo and a dead android with red triangle on its belly. ive tried pressing volume up+pwr keys but still no other option except the dead androod logo for 10mins then it will reboot. the second bootup shows the developers test. like test camera and other hardwares of the tab. all fully working. clear emmc and said formatting and goes booting back again.
so my best option is:
1. flash stock roboto font via adb but i dont know what im going to do. im new to this.
2. flash the stock rom. the prob is the makers of thr tab wont issue stock rom for us cause they said they dont support rooting.
my other question is if i flash the roboto will it fix the problem? and did anyone of you did this and succeed and passed the boot looping?
since i got only 2 options is there anyone of you got any other way to fix this before that option number 2. this tablet is just a gift from my boyfriend. its cheap but it had my sentiments. the store where he bought this is 200-300 miles away from my location and it will take 2 months before they could fix this. and that im going tovisit him a month from now. i need the tablet for gps since im a bit paranood with what happened to malaysia airline unsolved crash mystery unsolved i have to travel by plane next month to visit him. please help. i dont want to cause another harm to the tablet that will cause it bootable no more. i still can charge it. system hardwares all sound. your post is highly appreciated and sorry fpr my bad english.
Hey guys,
i have 2 from in the title mentioned device(they're both dual core versions with 512 mb ram), and flashed on both a custom rom, because the stock rom available for it and the stock rom which was on it after shipping were working badly. (slow reaction on starting/stopping applications, crashing and low available memory(ram))
But the custom rom i found for them works great, without any problem until now. (only one of them, both has the same rom, but only one of them is faulty, and i don't think so it's caused by the rom flashing)
The problem occured yesterday evening after 2 days of using after flashing the custom rom. The problem itself is, that the screen became white, fully bright white.
I tried to reboot the phone maybe it just stucked or crashed or something like that, but after reboot, on startup/bootup, i got the same white screen, which became sometimes a bit dimmer, sometimes again bright, but i think that's just the screen backlight, the background remained full white.
I tried to boot into recovery mode, the same happened.
Then i tried to boot into bootloader/fastboot mode through my pc with usb cable plugged in and in adb, i tried to log into the shell. (adb shell). That's works, i can see all the folders and files in the internal storage. Anyways, i flashed back a stock rom(system and boot img, there was nothing else in it) through adb without problem, but the problem still remained.
I think the problem is related to the screen, or some cable contact failure or maybe the gpu?
Any suggestion what could be the problem, and what can i do against it?
Thanks for your answer and help in advance.
Matt
PS: i wanted to post the links to the roms too, but i don't have enough post yet.
Ok...so I'm using the SM-N900 . I installed pakeka rI'm v6 and decided to go for Dr. Khetan rom L23. I installed it and after a while I decidedo to go back to stock so I booted into philz recovery , did a full wipe, and went into power option and selected to reboot into download mode. After that it rebooted and my phones screen went completely blank and later these "gold dust" kinda appearance came on the screen. I waited a while still same and then I took out the battery, waited for about five minutes , inserted the battery and still that same appearance , no logo screen , no recovery , no download mode, just that blank "gold dust" screen. So this time around I just booted into download mode (blindly of course) and then I pressed volume up assuming it's already in download mode since screen is blank. Opened Odin and flashed stock firmware and it was a success. After that it took about almost 10 minutes before finally the device setup screen appeared ( whewwww!) ...Since funny since then again, phone''s back to normal...but my question is,
...how did this happen?
...Has anyone experienced that before?
...What could've caused that?
...what could have been the immediate remedy in this situation?
...could it be my device problem that I need to be aware of or its just a software problem?
Please help, I need answers..
Hi there first let me say sorry for any spelling mistakes i have dyslexia and its hard for me to spot everything when i look over it so sorry
now down to buissness i have an Alcatel 4 (6) 4g from argos in the uk i think the model on the phone shows as 9001X but also shows as 9001D when you connect wondershare or other tools
i broke the screen on the device and took it to one of thoes little shops in the mall to get it fixed when there the guy told me he could root the device for you for me at the same time i thought yeh cool save me from doing it my self
when i went back to get the phone later that day it worked good in fact perfect he had rooted the device using king root and all was working good the device was working but then it suddenly rebooted out of the blue when it was led on a table
when the device started back up king root was still installed as a system app but it showed the device as not having any root access witch i thought was weird but i just left it like that while i made a few phone calls but again half way through a phone call the device restarted it self again
this time when the phone started back up it showed the pixi 4 logo and then the alcatel logo and refused to move any further its just stuck on this screen. I looked on XDA for a fix but couldnt fine anything for my model the 9001X/D i found one page that said you can format using recovery mode
i held down the power and volume up buttons and got access to the reovery menu and done a factory install and then restarted the phone but again got stuck on the alcatel screen
i sent alcatel an email asking for a stock image to flash from recovery or something but i got no email from them i then tried to use the upgrade tool from the alcatel website witch i thought would do it the phone was found and the upgrade tool started but at 2% but then i get a red error saying failed to read some ingformation check phone status but the phone is turned off as per the instuctions and nothing is on the screen
i cant find a stock image anywhere cant get the tool to work when i goto recovery and tell the phone to reboot into bootloader mode to run fastboot its never worked even when the phone was working it would simply say waiting for devices on cmd also in recovery if i enable adb still finds nothing i have no idea what i can do to get anything working or reset the phone at all
does anyone know what i can do or have an image that would work anything at all my phone only like 2 months old and i dont know what todo as the stall is no longer in the mall to go back to