Hi - Okay, having installed active sync 4.1 I ran the ROM updater (JAMin_WWE_213923_2139123_022021_shi).. at 95% the PC crashed. This has left the phone in a complete mess. All I have is a screen with a red, green and blue horizontal bands.
On the screen it says RUU - IPL 1.00 - SPL2.13
I can't seem to reset the phone.
Can anyone help me sort this out?
Many thanks in advance.
Russell
UPdate problem fixed
Hi
Turned out that the screen described was the bootloader screen (I think).
I had to resart the PC to get rid of any open connections (error 260) and then run the ROM again. This connected and updated the phone despite the fact that active sync couldn't see the phone..
Phew, been a long day!!
Cheers Russell
Press reset button+camera button bootloader mode after load this rom
RUU_Prophet_220734_2207114_024721_NVID and enjoy it...
Related
Can someone please help.
Recently I installed WM6 on my palm treo 750 and after a lot of trial and errors with various applications (each fail install resulting in a hard reset - mainly WM Live and Skype to get it to work properly. Everything worked great for about a week and yesterday everything ran really slowly, even after a hard reset.
I decide to reinstall the ROM from the memory card and that's where it's broken.
I would get the screen up as follows:
00018002
CHEEIMG.nbh - loaded
SPLASH1 - OK
bOOTLOADER - OK
GSM -
MICROP -
EXTROM -
OS -
and the progress bar only moves to about 1/20th along and stays there permanently (I left it over night last night)
I now can't get it to load at all and if I take out the memory card, it stays on the red/green/blue screen with "serial" at the bottom
Any help would be much appreciated
Fixed
The above problem fixed itself but the other day I dropped the phone again and now it's stuck back in the above post position.
I've tried using the palm recovery tool but with no luck.
Any help please :-(
broken again
The above problem fixed itself but the other day I dropped the phone again and now it's stuck back in the above post position.
I've tried using the palm recovery tool but with no luck.
Any help please :-(
solution???
did you get your fone fix again?? same problem happened here but it never worked for me!!!! maybe you might help!!
Try installing the 223 ROW from the EXE with the suggested mods to the XML config file. It may be something with your SD card.
Hi all,
my first post, am helpless with very specific problem, tried hard all night and read many threads...
After failed rom/radio update (abborded as error 114 when starting update at 0%), device got stuck in bootloader.
Found out I can only reboot device by shortly opening and closing the battery cover. Thereafter press ON-button --> reboot --> the usual T-Mobile software installs --> automatically initiated softreset again ends up in bootloader.
Only way is to take off the batt. cover again right before T-Mobile software installation. Device then works without T-Mobile Software and ROM is accessible. But still every softreset leads to bootloader screen, also the softreset after running a SpriteBackup-File etc.
Tried every ROM-Update (and even downgrades) I could find (http://www.inntalinfo.de/apboard/thread.php?id=3373), especially "MDA compact_TMDE_11301_129_11200_Ship.exe" from t-mobile.de again and again with device nicely connected to PC via ActiveSync before. Updates never exceed 0%... --> allways error 114
Do I use rong updates or is something wrong with the softreset function?? Please, how can I solve this?
MDA compact, T-Mobile
R 1.123.00
G 1337.42
D 1.13.01 GER
bootloaderscreen says v1.02
this happened to me 2 m8... glad i'm not alone... i'm just about to upgrade the rom, i think it'll work... did you do the first upgrade, the one that f-ed it up, under vista?
Hello again,
I been flashing ROMS for a while now but now I having some problems that I can't solve.
Since I installed the Laurentius26_KaiserDiamond_V10 I can't update the rom anymore. The Kaiser connects to the update, the update program confirms the connection (it checks if the battery is above 50%, confirm the previous fiirmware, etc.)
When the program shows the progress bar (On the PC) the kaiser screen blimp one time to the grey screen (the one with the progression bar) and turn back to three collors screen (in less than a second). After one or two minutes the program (on the PC) gives a erro message.
I have to reset the Kaiser but no ROM was installed
Does anyone know how to solve this problem? I'm using SPL 3.29 but I have already tried Hard SPL 3.28 and back to the 3.29 again.
Thanks
Hi there,
That happened to me too. What I had to do was to download the original rom from HTC and flash that. After, i did the usual: hard reset, remove batter, restart computer. Then I could flash
Michael
Diamond: dutty 1.8 full
Kaiser: Romeos 4.3
Check the link in My Sig.
Ta
Dave
I tried your sugestions. Tried to flash the original Orange ROM but had the same problem as the cooked ROMs. It stopped at the three colors screen.
I think myh problem is a little different from other cases here. My phone is working with the Rom it have right now. It only got stuck on the three color screen when trying to flash a new Rom. To remove the screen is just reset it (normal reset, no hard reset) and it goes back to 'normal' but with the old rom. Can't flash a new one
Also tried the mtty.exe method, but when I open the mtty it shows "CLIENT". If I push any key it shows one more "CLIENTE". after 34 "CLIENT" Messages (it shows "CLIENTCLIENTCLIENTCLIENT" it freezes...
Can someone help me please?
Thanks
Try flashing the new Hard SPL be cmonex.
http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave
Hello everyone,
I have a problem with my imate jam. When I soft rest the device it shows a screen with Serial ( V1.0 ).. and nothing happens... I don't see any progress !
then, and in order to turn on the device again, I have to take off the back cover and place it again and then press on the power button. Then, when I start the device, it goes all the way with a loading process until it shuts off by itself. for no reason. any ideas what's going on ?
one more info. I tried to update the ROM, using imate website. I downloaded the latest version available in their website, but the phone turned off in the middle of the update process, and showed USB V1.0 on the screen.
Need Help !!!
Greetings all !!!
I'm a windows mobile user....I'm using an htc p3600 trinity.
I've never had trouble updating my phone's rom, untill yesterday!!!
Usually i just connect the phone thru usb cable and use the Rom Update Utility.
But this time
I copied the 'SSPL-TRIN' file to the device and ran it from the phone.
Sadly it hanged at the red-blue-green screen. No matter how many times i tried resetting the phone(soft reset), it showed the same.
I then ran a working Rom Update Utility(RUU) and it showed the updating process from 1- 100 %.
After completion, it now shows the htc pic ( as it normally does when starting) and then it shows me only a white screen!!!
I've tried using RUU, but no use! The phone doesnt even detect up on the activesync (using win XP)
Plzzzzzz gimme advice bcos i love this phone and dont want to get another one!!!!!
If you can get to htc screen, then you can get into recovery console. Do that, then wipe data/factory reset. That should fix the problem.
Its been a while but it finally worked Alhamdulillah(praise to God)
All i needed was to get to the bootloader screen.
I installed windows mobile device center(previously known as activesync)
on my windows 7 .
I pressed and hold the 3 buttons shown in the pic attached, and it got me to
the bootloader screen( the one with red,green,blue bars).
Then i ran the official rom update for my htc p3600 (downloaded from htc's website).
And to God's grace, it started updating and i got back my phone.
If this post has helped anyone of you, plz click on 'thanks ' on this post!!
Any help on further explainations...contact or pm me!