after flashing new spl,didnt chang the spl - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

hi
i just tried to go from 3.56 to 3.29 SPL
i did everything like i all ways do but i think after everything i did
it didn't do any thing, and im still with the 3.56SPL
is their a way to chack what spl is running on my kaiser now?
(i used sspl-kais and after that i flashed the 3.29)
danny

speebman said:
hi
i just tried to go from 3.56 to 3.29 SPL
i did everything like i all ways do but i think after everything i did
it didn't do any thing, and im still with the 3.56SPL
is their a way to chack what spl is running on my kaiser now?
(i used sspl-kais and after that i flashed the 3.29)
danny
Click to expand...
Click to collapse
In the 3.* HardSPL thread there are two methods by Kyphur, try the second one - exactly as stated.
Please post any other problems in that thread.
@Mods, close this.
Ta
Dave

Closing Thread.
Please post in the corresponding/correct thread.
Thank you.

Related

Cant Revert from hardspl

I have been followingthe in structions on how to to this i just want to run l26 diamond with the correct spl so it dosent freeze i get to the sspl-kaiser part and it goes to bootloader but my pc dosent find it when i run the custom ruu??says it fails to find usb or somthing. do i have the wong original att rom im trying to use
RUU_Kaiser_CINGULAR_WWE_ with the new att spl supplied inthe reverting thread??? HELPPP please link to the other rom if i do havethe wrong one for this thanks.
jefem24 said:
I have been followingthe in structions on how to to this i just want to run l26 diamond with the correct spl so it dosent freeze i get to the sspl-kaiser part and it goes to bootloader but my pc dosent find it when i run the custom ruu??says it fails to find usb or somthing. do i have the wong original att rom im trying to use
RUU_Kaiser_CINGULAR_WWE_ with the new att spl supplied inthe reverting thread??? HELPPP please link to the other rom if i do havethe wrong one for this thanks.
Click to expand...
Click to collapse
Once you run sspl and it goes to bootloader it should show USB on the bottom. Once it says that you need to unplug and then replug your device's usb connection. Then continue to the flashing part.
jefem24 said:
I have been followingthe in structions on how to to this i just want to run l26 diamond with the correct spl so it dosent freeze i get to the sspl-kaiser part and it goes to bootloader but my pc dosent find it when i run the custom ruu??says it fails to find usb or somthing. do i have the wong original att rom im trying to use
RUU_Kaiser_CINGULAR_WWE_ with the new att spl supplied inthe reverting thread??? HELPPP please link to the other rom if i do havethe wrong one for this thanks.
Click to expand...
Click to collapse
okay if i understand correctly, u already have hardspl?
spl's r not rom specific. ur phone comes with an spl and flashing roms over ur carriers spl can and will lead to u bricking ur phone.
now if u r trying to flash hardspl than follow instructions to the "t" and post back.
lol
that one vital step got me un plugging and replugging the phone lmao
ok im at 1.93 thats the newest??? thought i read somthing about a 3.25 but it was german
is 1.93 good fro l26 diamond?
jefem24 said:
that one vital step got me un plugging and replugging the phone lmao
ok im at 1.93 thats the newest??? thought i read somthing about a 3.25 but it was german
is 1.93 good fro l26 diamond?
Click to expand...
Click to collapse
okay i will repeat that is a version of jumpspl; it has nothing to do with the rom. ROMS ARE NOT spl dependent. As long as you get hardspl onto your device (doesn't matter if you use jumpspl 1.93 or 1.5x, whichever one works) you can flash leos, dutty's, shogunmark's, kyphurs, _alex_'s anyones rom you want.
but the freezing issue is the reason i was doing all this im so confused now do i need to re hard spl my phone again to flash other roms what would be the purpose of soing what ive done then??? or are people just guessing at the stalling issue still?????
thesire said:
okay i will repeat that is a version of jumpspl; it has nothing to do with the rom. ROMS ARE NOT spl dependent. As long as you get hardspl onto your device (doesn't matter if you use jumpspl 1.93 or 1.5x, whichever one works) you can flash leos, dutty's, shogunmark's, kyphurs, _alex_'s anyones rom you want.
Click to expand...
Click to collapse
1.93 is actually a valid AT&T SPL it is the updated (although not the latest) one. So he might not be referring to jumpSPL even though there is also a version 1.93 of that (most probably based off the AT&T SPL).
jefem24 said:
but the freezing issue is the reason i was doing all this im so confused now do i need to re hard spl my phone again to flash other roms what would be the purpose of soing what ive done then??? or are people just guessing at the stalling issue still?????
Click to expand...
Click to collapse
I don't want to blow you off, but you should really go back and read the threads dealing with this to get a better understanding.. There are a few and they answer all the questions. If you are read them and still have questions or problems, post in those threads since continuing this thread is just more of the same.
jefem24 said:
but the freezing issue is the reason i was doing all this im so confused now do i need to re hard spl my phone again to flash other roms what would be the purpose of soing what ive done then??? or are people just guessing at the stalling issue still?????
Click to expand...
Click to collapse
when u mentioned 1.93 i thought u were referring to jump spl (thanks for clarrifying bengalih).
yes apparently going back to the att spl does fix freezes (can't confirm as i haven't tried) and if u need help with that post under relevant thread as bengalih suggested.
yes if u r going to flash a cooked rom u will need to reflash hardspl first.

SSPL,JUMP SPL dont work,pls help!!

Hi, I use to flash cooked roms and go back and forth with official ones together with my spl. Now that i wanted to flash hard spl again so i can use newly cooked roms i cant flash hard spl using sspl or jump spl. it doesnt show usb anymore as how it use to be..anybody pls help? is there a way to flash hard spl without the sspl or jump spl?
thanks guys.
skipperbien said:
is there a way to flash hard spl without the sspl or jump spl?
thanks guys.
Click to expand...
Click to collapse
no .. atleast not that i know of. Secondly do you currently have hardspl?? also did you try this
http://forum.xda-developers.com/showthread.php?t=396922
it has options if you don't see usb on bottom.
thesire said:
no .. atleast not that i know of. Secondly do you currently have hardspl?? also did you try this
http://forum.xda-developers.com/showthread.php?t=396922
it has options if you don't see usb on bottom.
Click to expand...
Click to collapse
i use to have hard spl sir,and went back to normal official spl,just like going back to official roms.never had a problem..all went smoothly. been running official wm6.1 htc wwe for 2 weeks now with the original spl (not hard spl). Now that i wanted to try again to hard spl and flash cooked roms safely i cant see the usb on the bottom when i do sspl or jump uspl. am i missing something sir??
check for my reply under the sticky at the top of the forum
hard spl flashing...
hello skipper, thesire, and all others,
i wanted to reiterate that you should really read the forum linked above because it has a special "force usb" version of the hard spl installation that mau very well help you.
also, we could all maybe help you a bit more if you could post your firmware/spl versions (the numbers listed at top left on bootloader, but you probably knew that already, lol) Just so we can get a better idea of your situation- the more info the better!
i do a lot of kaiser and athena rom building, I posted a few decent roms at the beginning of the year but i havent released one since... (workin on one now though) but i am not exactly the caliber of rom builder that some of these guys are ... anyways, my point is that i have been in A LOT of hairy situations like this, but persistance is the key, so if i can help in any way i will....
THEQUARTZGUY said:
hello thesire, and all others,
i wanted to reiterate that you should really read the forum linked above because it has a special "force usb" version of the hard spl installation that mau very well help you.
also, we could all maybe help you a bit more if you could post your firmware/spl versions (the numbers listed at top left on bootloader, but you probably knew that already, lol) Just so we can get a better idea of your situation- the more info the better!
i do a lot of kaiser and athena rom building, I posted a few decent roms at the beginning of the year but i havent released one since... (workin on one now though) but i am not exactly the caliber of rom builder that some of these guys are ... anyways, my point is that i have been in A LOT of hairy situations like this, but persistance is the key, so if i can help in any way i will....
Click to expand...
Click to collapse
hey genius you are replying to the wrong guy. I DID NOT make the post. The guy who did i already suggested the solution you provided (even before you did) under jockyw's hardspl thread where he posted the same exact problem ....
i have managed to get in to the bootloader to flash the hard spl,using the 1.56 ver of sspl..however,neither of all the hard spl works after that.i cant flash any of the hard spl packages. im really suprise this is happening as i have done a lot of flashing back and forth for my tytnII. oh yah,my spl is 3.29 from the official HTC WWE wm6.1
thanks for all the help..

Flashed to Rom's stop at 16% and 18% ! Help

Hello,
KAISER (o2 realease.
Trying to flash to 6.1.
Sleuth V3 stops at 18% and Lex 26 Diamond V9 @ 16% - Installed as per the excllent Sleuth guidlines.
What am I doing wrong? - Being a newbie, I have suspicions the radio needs and upgrade however - Please can someone point me in the right directions.
Have recovered using Mitty http://forum.xda-developers.com/showthread.php?t=371154
Thankyou Mitty!!
Cheers all
Paul
Have you installed Hard SPL?
Everything you need to know about flashing is here: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading start following these instructions and let us know how far you get, before you have problems.
Thanks
Dave
pretty sure he missed the hardspl! use jockeyw hardspls if you want flashing wm 6.1 olipro will also work but its recommended to use a hardspl ripped from a wm 6.1 edition
DaveShaw said:
Have you installed Hard SPL?
Click to expand...
Click to collapse
Thanks for Reply
I have been using JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS.exe - When flashing both rooms - Will study your link and let you know if missed anything
Many thanks for the assistance
Jump SPL is used for Flashing Hard SPL's only. If you have flashed Hard SPL already, then you just plug in your phone to your PC via USB and use the KaiserCustomRUU tool.
Or Flash from SD Card (Instructions in the Wiki).
Thanks
Dave
Hey bro, I had the same problem. Figured out that you need to CID unlock the phone before you flash HardSPL. Fixed it for me. Good Luck!
Vampire2800 said:
Hey bro, I had the same problem. Figured out that you need to CID unlock the phone before you flash HardSPL. Fixed it for me. Good Luck!
Click to expand...
Click to collapse
Unless I'm suffering from amnesia, HardSPL IS the method for CID Unlocking.
I know, but I had to download & run the SID/CID unlocker for the hardSPL to work.
Buggin me bugging you
Hi Guys...
Bugging me
Have unlocked using http://forum.xda-developers.com/showthread.php?t=375583
Have hard flashed http://forum.xda-developers.com/showthread.php?t=354061
No change - still sleuth stops at 18%!!????
Have also tried on 3 different PC's ! and different USB connections on each pc.
Can the experts figure this one out!!? - Have ai not CID unlocked properly it reset to series of 00000's from 02something? -
Wife not pleased now 2 am has been twice with complaints of reset of active sink noises -tradgic....
Paul aka three 2008

Stuck with OliPof SPL 1.0...

When I first got my kaiser I flashed the OliPof HardSPL v1.0 (SPL-1.0.OliPof).
I'm now trying to upgrade to a later HardSPL (3.56) and it doesn't appear to be updating, according to the rainbow-screen.
I've tried JumpSPL with no success. Any Suggestions?
Chris
edit: Solved.
how did you solve this? same problem here
jtclist said:
how did you solve this? same problem here
Click to expand...
Click to collapse
In the 2nd post in the jockyw Hard SPL Thread there are two sets of instructions, read the second set.
Ta
Dave
wow! you guys dint even use search, did you?
its in the stickies up there..spoon-fed!

olipof spl-1.0

got a bit of a problem. Got above SPL installed. Tried upgrading it to hard spl 3.29.Every time it comes to 100% but old SPL still on. Device must be CID unlocked as it has custom ROM, takes other SIM cards and has above SPL.
Tried using Jumspl 1.56, 1.93 but no luck. This also stops me of upgrading the radio on it.
Any ideas
Try flashing with an SD Card... check out the HardSPL thread created by DaveShaw, in the first post there is a really good walk through and downloads for all the files. If you can't get that to work, post in that thread please. I, and many others, check it on a regular basis to answer questions just like this.
Also, double check that you do have 1.0 Olipro, enter boot loader mode and make sure 100% that is what it says. Also, what ROM are you running? Make sure you have a 6.1 ROM if you want to flash a 6.1 SPL or Radio. And please answer all of these questions in the HardSPL roll up thread by DaveShaw that is stickied.
pjcforpres said:
Try flashing with an SD Card... check out the HardSPL thread created by DaveShaw, in the first post there is a really good walk through and downloads for all the files. If you can't get that to work, post in that thread please. I, and many others, check it on a regular basis to answer questions just like this.
Also, double check that you do have 1.0 Olipro, enter boot loader mode and make sure 100% that is what it says. Also, what ROM are you running? Make sure you have a 6.1 ROM if you want to flash a 6.1 SPL or Radio. And please answer all of these questions in the HardSPL roll up thread by DaveShaw that is stickied.
Click to expand...
Click to collapse
Said well. Closing thread.

Categories

Resources