Database Info

Cant Revert from hardspl

I have been followingthe in structions on how to to this i just want to run l26 diamond with the correct spl so it dosent freeze i get to the sspl-kaiser part and it goes to bootloader but my pc dosent find it when i run the custom ruu??says it fails to find usb or somthing. do i have the wong original att rom im trying to use
RUU_Kaiser_CINGULAR_WWE_ with the new att spl supplied inthe reverting thread??? HELPPP please link to the other rom if i do havethe wrong one for this thanks.

jefem24 said:
I have been followingthe in structions on how to to this i just want to run l26 diamond with the correct spl so it dosent freeze i get to the sspl-kaiser part and it goes to bootloader but my pc dosent find it when i run the custom ruu??says it fails to find usb or somthing. do i have the wong original att rom im trying to use
RUU_Kaiser_CINGULAR_WWE_ with the new att spl supplied inthe reverting thread??? HELPPP please link to the other rom if i do havethe wrong one for this thanks.
Click to expand...
Click to collapse
Once you run sspl and it goes to bootloader it should show USB on the bottom. Once it says that you need to unplug and then replug your device's usb connection. Then continue to the flashing part.

jefem24 said:
I have been followingthe in structions on how to to this i just want to run l26 diamond with the correct spl so it dosent freeze i get to the sspl-kaiser part and it goes to bootloader but my pc dosent find it when i run the custom ruu??says it fails to find usb or somthing. do i have the wong original att rom im trying to use
RUU_Kaiser_CINGULAR_WWE_ with the new att spl supplied inthe reverting thread??? HELPPP please link to the other rom if i do havethe wrong one for this thanks.
Click to expand...
Click to collapse
okay if i understand correctly, u already have hardspl?
spl's r not rom specific. ur phone comes with an spl and flashing roms over ur carriers spl can and will lead to u bricking ur phone.
now if u r trying to flash hardspl than follow instructions to the "t" and post back.

lol
that one vital step got me un plugging and replugging the phone lmao
ok im at 1.93 thats the newest??? thought i read somthing about a 3.25 but it was german
is 1.93 good fro l26 diamond?

jefem24 said:
that one vital step got me un plugging and replugging the phone lmao
ok im at 1.93 thats the newest??? thought i read somthing about a 3.25 but it was german
is 1.93 good fro l26 diamond?
Click to expand...
Click to collapse
okay i will repeat that is a version of jumpspl; it has nothing to do with the rom. ROMS ARE NOT spl dependent. As long as you get hardspl onto your device (doesn't matter if you use jumpspl 1.93 or 1.5x, whichever one works) you can flash leos, dutty's, shogunmark's, kyphurs, _alex_'s anyones rom you want.

but the freezing issue is the reason i was doing all this im so confused now do i need to re hard spl my phone again to flash other roms what would be the purpose of soing what ive done then??? or are people just guessing at the stalling issue still?????

thesire said:
okay i will repeat that is a version of jumpspl; it has nothing to do with the rom. ROMS ARE NOT spl dependent. As long as you get hardspl onto your device (doesn't matter if you use jumpspl 1.93 or 1.5x, whichever one works) you can flash leos, dutty's, shogunmark's, kyphurs, _alex_'s anyones rom you want.
Click to expand...
Click to collapse
1.93 is actually a valid AT&T SPL it is the updated (although not the latest) one. So he might not be referring to jumpSPL even though there is also a version 1.93 of that (most probably based off the AT&T SPL).

jefem24 said:
but the freezing issue is the reason i was doing all this im so confused now do i need to re hard spl my phone again to flash other roms what would be the purpose of soing what ive done then??? or are people just guessing at the stalling issue still?????
Click to expand...
Click to collapse
I don't want to blow you off, but you should really go back and read the threads dealing with this to get a better understanding.. There are a few and they answer all the questions. If you are read them and still have questions or problems, post in those threads since continuing this thread is just more of the same.

jefem24 said:
but the freezing issue is the reason i was doing all this im so confused now do i need to re hard spl my phone again to flash other roms what would be the purpose of soing what ive done then??? or are people just guessing at the stalling issue still?????
Click to expand...
Click to collapse
when u mentioned 1.93 i thought u were referring to jump spl (thanks for clarrifying bengalih).
yes apparently going back to the att spl does fix freezes (can't confirm as i haven't tried) and if u need help with that post under relevant thread as bengalih suggested.
yes if u r going to flash a cooked rom u will need to reflash hardspl first.

Jocky HardSPL etc

OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks

pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
Read the SQL Questions thread in the Wiki. It will explain a lot of this to you.
In short, any HardSPL will allow you to flash, it's just the 3.* ones are more compatable with the latest WM6.1 builds.
EDIT:
Normally I'd flame you for this, but Im already flaming another noob atm That doesn't mean someone else wont flame you later.
Ta
Dave

pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
If you are able to flash a ROM onto your device, then you must have an UNLOCKED phone. For simple instructions on upgrading to the new SPL I suggest you visit the following :
http://forum.xda-developers.com/showthread.php?t=398565&highlight=step
Good luck.

Well I am sure I am gonna get flamed for this post, but here goes....
BTW "I AM NOT MOANING OR PICKING FOR AN ARGUMENT" I know this info here is given as is and appreciate the time people spend putting it all together
For the noob there is a trillion things to read here all of which lead to another trillion things which lead to ......
This phone flashing is all new to me and as I paid £434 for it I dont want to brick it, a term along with many I have never heard of before coming here.
I digress...
Anyway after reading and trying to understand it all I have flashed my phone and it works a treat and I am happy, just still in the dark about many things.
The thing is as a noob it is extremely daunting to start to read a thread, wiki etc to try to understand about a topic which diverts you to threads which divert, divert, divert so that after 3-4 diversions you foget what it was you were readiing about to start with!
And then you get to the point....I dont understand this...should I post lest I get flamed.......
So basically from a noobs point of view....everyone was a noob at some point, be gentle with us!
OK.....let the pachjo bash commence...........

Not a flame, just my way of working...
You raise some good points about the amount of info here. But like most here I managed to flash my device without posting a single new thread. If I had a problem with a step I posted there.
_Alex_ has consolodated most info into the single sticky. And there are step by step guides and FAQs on the Wiki.
I just took it one topic at a time:
*Found a ROM, said I needed HardSPL.
*Found HardSPL, installed it.
*Flashed ROM.
*No sound, found thread explaining about Radios. Flashed Radio.
*and so on.
I was (and still do) always reading thread that I found related to me learning as I go and helping where I can. I too like you knew nothing when I first joined and no one minds "noobs" asking questions in the relevant threads when they get stuck, but this is ROM development forum. All new threads should pertain to ROM "development".
Ta
Dave

you must use (aka JumpSPL )file before changing the SPL
this jumber must be in your device before flashing the new hard SPL
see hare and read carefuly :
http://forum.xda-developers.com/showthread.php?t=396922
got it from here also
http://forum.xda-developers.com/showthread.php?t=354061
cheers

Thanks guys.....am reading away and will take onboard your comments

first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.

thomassster said:
first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.
Click to expand...
Click to collapse
Yep... I shall do that!
I have gone flash crazy as I am now gonna whack on L26_KaiserDiamond_V9
I am amazed at how fast my apps are loading now I am no longer on the stock ROM!
The phone reception is better, the SRS WOW is fandabbydosey its all good for me, and I have fixed (well found the solution to at least one of my gliches also)

Few Questions After Reading the Wiki Tutorials

I have an AT&T Tilt and would like to flash the firmware to the HyperDragon III which can be found in this thread.
http://forum.xda-developers.com/showthread.php?t=397121
Following the directions in the TILT Specific Wiki, I flashed the HardSPL which was version 1.57.502.2. This was the file listed in the thread for the TILT.
Checking out the other threads in this forum, it looks like there are now HardSPL version in the 3 range like 3.07 3.28 3.29.
I'm confused if the file listed on the TILT Wiki was correct or if I actually need a different HardSPL file.
My other question is about Radio. I have read all the information about making sure that the radio on my phone will work with the rom that I would like to install.
What I cant seem to find though is how to check what radio my phone is currently using ?
Any help on this would be appreciated.
I know that answers are probably in the forum somewhere I just can't seem to find the right search string to pull it up.

Use the HardSPL found here: http://forum.xda-developers.com/showthread.php?t=396922 (this is a sticky on the ROM dev page).
Here is a guide for Radios: http://forum.xda-developers.com/showthread.php?t=393182 - basically flash a radio onto your device and test it out. Different radios will give you better/worse battery life, affect connectivity, GPS, and the like. Performance varies by region and what ROM you have installed.
Here is another link you may find useful: http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Hope this helps.

So the newer versions of the HardSPL have the same benefits as the one I installed said it did ? Such as being able to go back to older, original roms and helping to protect against bricking ?

QuantamPulse said:
So the newer versions of the HardSPL have the same benefits as the one I installed said it did ? Such as being able to go back to older, original roms and helping to protect against bricking ?
Click to expand...
Click to collapse
The 3.* versions of Hard Spl do the same as the 1.* versions - they allow you to flash cooked Roms. The 3.* have better compatability with WM6.1 than the 1.* versions, thats all.
Ta
Dave

Another question, I am trying to flash the new 3.56 HardSPL before installing the new Rom.
Do I need to use the SoftSPL even though I already have the 1.5x HardSPL installed or can I just run the update like normal.
Also, when trying to run the update like normal using the KaiserCustom RUU File, I run through the wizard and after getting my phone information it correctly shows that I currently have 1.5x, however it says that I will be updating to 1.00.000.0
Is this normal ? Or should it actually show that it is updating to 3.56 ?

yes thats normal one quick thing search for jockeys security unlocker that has saved many headaches

youtube solution
Hi, the youtube video below walks you through it
http://www.youtube.com/watch?v=ezZ-2lHi3T8&NR=1

Flash - What Went Wrong?

I've always fancied flashing my Kaiser (V1615) with a new ROM, but was always nervous because I wasn't sure of the process and didn't want to risk bricking the phone as well as all the effort needed to get everything back on it I needed. Well, a few days ago my old Kaiser met the floor and an untimely end. So I decided to take the risk and put a new ROM on it and decided on the latest Dutty WM6.1 ROM.
I read all about flashing on here and made as much sense of it as I could. Thing is, I'm very technical in general, but not very familiar with Windows Mobile or flashing. I found there was lots to read, but it was all written with an assumed level of knowledge and understanding of terminology. As a result I found it quite hard to understand. I took the plunge anyway and started, but things didn't work out as expected and I didn't understand why.
I'm not trying to be critical of all the work a lot of people have put into the documentation that is available online, it's just that when I originally approached this with zero flashing experience I found it difficult and confusing to understand. What I really needed was a concise and basic introduction to flashing. I've now been through the process and after re-reading the documentation it makes a lot more sense.
I worked out you need to run something called HardSPL before you could flash a new ROM. I'm still not sure what HardSPL does apart from CID unlock the device, but what does CID unlock mean?
I ran HardSPL v1 and it started ok, but then I ended up with a white screen. At this point I already wished I hadn't started, but no going back now. Is it known why some phones white screen? Turns out it's a common problem, so followed the instructions to recover. All was well again, but still with the original ROM.
I thought I'd be brave and stuck with it and this time tried JumpSPL1.56-KAIS instead of HardSPL as recommended on one of the tutorials. This went better and I ended up with the Tri-Color screen. I plugged my USB cable in and USB showed on screen.
Next step I thought was to flash a ROM onto the device. I ran the Dutty updater on my PC and all started ok, but when the update got to 18% I received a communication error. I tried to recover using the updater, but the same thing happened. At this point the phone wouldn't boot, so I was more than a little worried and wishing I hadn't started!
Found something that described several options for recovering from this problem. I decided to try and flash the device back to the original ROM from Vodafone. When I eventually found that ROM I ran JumpSPL again, got to the Tri-Color screen and ran the updater. This time the update completed successfully and the phone rebooted and was all working again.
I decided to leave the device as it was and started customising it myself. I'd still love to put a cooked ROM on there, especially if it helps with performance, but after the experience above I'm not very confident.
Can anyone tell me where or what went wrong? I'm going to get my old Kaiser repaired and want to try again on that phone.

My flashing routene (not ideal but it works for me)
1) run the first part of the Kaiser SIM/CID Unlocker & Changer
2) after device reboots, hold camera button and restart to check SPL
3) Flash rom/radio of choice
4) Follow HardSPL v3.07, v3.28, v3.29 and v3.56 by JockyW 's second guide "If you have problems with the above process, try this:" and flash my 3.XX SPL of choice.
Sam

Wow, I need a cuppa now
I'll go through 1 at a time... (and Sam has answered some questions already)
-CID unlock means that when the phone is loading a new device into the ROM the Carrier ID check is removed, each Mobile phone carrier has a different CID in thier OS ROMs. Unlocked means you can flash a OS ROM from any carrier or a cooked OS ROM from this site.
-The Jump SPL should only be used for replacing the SPL. Do not flash anything other than SPL's when at the Jump SPL (or SSPL). OS and Radio ROMs should be flashed from either in Windows Or By Manually Entering the Bootloaders. More info on SPL's is here: http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
-Have a look at flashing from SD Card to avoid communication problems, http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash
-The most clear instructions can be found here: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Hope this helps.
Dave

Thanks for the advice, but this is what I normally encounter when I read something on here, which is advice which no doubt makes perfect sense to the author or others experienced in flashing, but usually raises more questions than it answers in my head.
For example;
1) run the first part of the Kaiser SIM/CID Unlocker & Changer
Click to expand...
Click to collapse
What do you mean by the "first part"? The thread you've linked to doesnt really explain what I'm downloading and doing.
2) after device reboots, hold camera button and restart to check SPL
Click to expand...
Click to collapse
Ok. I get this assuming you mean the device will reboot automatically and I restart it to check the SPL version that gets shown on the boot screen, but why do I need to do this?
3) Flash rom/radio of choice
Click to expand...
Click to collapse
So at this point I can simply plug my device into my PC and run the ROM updater I've downloaded. Working out what rom/radio version to download is a minefield in its own right.
4) Follow HardSPL v3.07, v3.28, v3.29 and v3.56 by JockyW 's second guide "If you have problems with the above process, try this:" and flash my 3.XX SPL of choice.
Click to expand...
Click to collapse
I thought HardSPL needed to be run before I flashed? Also, why the different versions? Which one do I choose?

BTW, not trying to moan about everything, just posting my experiences to find out where I went wrong, but also highlight some issues hopefully other flashing newbies can relate to and authors of tutorials can draw some useful feedback from.

Only one question, do I need to CID Unlock before using Jump and HardSpl or, the Hardspl does the Supercid ?
I'm not referring about SIM since I don't care, for now
With WM6.1 - Oficiall HTC ROM
Thanks

Thanks for that one dave, on reflection i kinda missed the whole point of the thread, and as for the majority of the stuff you posted i didnt undertand that to begin with.
Also, DaveTME, if you are wanting to flash a custom rom to youre kaiser. from my experiance and from the number of times ive seen this happen. i advise against asking for reccomendations(sp?) (not saying you will but its worth saying) try a few roms out and decide from there.
Also another thing to note. if you flash to WM6.1 remember to use a 3.xx spl otherwise you'll encounter a few problems with youre device.
Sam
What do you mean by the "first part"? The thread you've linked to doesnt really explain what I'm downloading and doing.
Click to expand...
Click to collapse
download the Kaiser unlocker and run the first stage of it, the program is in the linked thread.
Ok. I get this assuming you mean the device will reboot automatically and I restart it to check the SPL version that gets shown on the boot screen, but why do I need to do this?
Click to expand...
Click to collapse
No, after the device reboots, youre given youre Rom, Protocol and Radio. if you hold the camera button and reset you'll get youre SPL displayed, youre looking for 1.01 olinex to be shown
So at this point I can simply plug my device into my PC and run the ROM updater I've downloaded. Working out what rom/radio version to download is a minefield in its own right.
Click to expand...
Click to collapse
1) Yes, just run the RUU with youre chosen rom and thats it
2) its not a minefield, just make a decision on what rom you like and flash it. theres nothing to stop you flashing another one.
I thought HardSPL needed to be run before I flashed? Also, why the different versions? Which one do I choose?
Reply With Quote
Click to expand...
Click to collapse
The 1.01 SPL will allow you to flash a cutom rom. following that you need a 3.xx SPL as they are designed for windows mobile 6.1. as for yure decision. i use 3.29, yet other users have had better sucess with 3.56. Most rom chefs will say which SPL they reccomend anyway with their rom.

-CID unlock means that when the phone is loading a new device into the ROM the Carrier ID check is removed, each Mobile phone carrier has a different CID in thier OS ROMs. Unlocked means you can flash a OS ROM from any carrier or a cooked OS ROM from this site.
Click to expand...
Click to collapse
Great. Thanks for that. Makes perfect sense now
-The Jump SPL should only be used for replacing the SPL. Do not flash anything other than SPL's when at the Jump SPL (or SSPL). OS and Radio ROMs should be flashed from either in Windows Or By Manually Entering the Bootloaders. More info on SPL's is here: http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
Click to expand...
Click to collapse
Ok. I think you mean that the SPL is a component on the device? What is the difference between HardSPL and JumpSPL?
-Have a look at flashing from SD Card to avoid communication problems, http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash
-The most clear instructions can be found here: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Hope this helps.
Dave
Click to expand...
Click to collapse
Thanks, will have a read

DaveTME said:
Ok. I think you mean that the SPL is a component on the device? What is the difference between HardSPL and JumpSPL?
Click to expand...
Click to collapse
Read the "SPL Questions" Wiki Page, it is all there and fairly clear.
Ta
Dave

What are SSPL, HSPL and Radio?

I swear I have used the Search tool, but lots of topics have HSPL in their title, and I weren't able to find any FAQ topic talking about that.
Everybody here talks about SSPL, HSPL, how to use them and so on. The only think I understood is that to flash custom roms you need HSPL, and for official roms SSPL is "enough". Could anybody tell me something more and explain me why do we need this stuff to flash a rom and not just run a .exe on the device which could do everything automatically?
I also didn't understand what the Radio is. I thought a part of the rom which manages the GSM/3G antenna, but I think I am wrong.
Thank you in advance

Black Antitoon said:
I swear I have used the Search tool, but lots of topics have HSPL in their title, and I weren't able to find any FAQ topic talking about that.
Everybody here talks about SSPL, HSPL, how to use them and so on. The only think I understood is that to flash custom roms you need HSPL, and for official roms SSPL is "enough". Could anybody tell me something more and explain me why do we need this stuff to flash a rom and not just run a .exe on the device which could do everything automatically?
I also didn't understand what the Radio is. I thought a part of the rom which manages the GSM/3G antenna, but I think I am wrong.
Thank you in advance
Click to expand...
Click to collapse
okay
spl = Secondary Program Loader. Think of this in the same sense as bios on a pc. (it sets where your system boots from, intialises sub system process etc)
sspl = soft spl (this allows you to flash another spl or hardspl).
hardspl = hard spl .. basically it allows flashing of any rom. It protects you from bricking your device. If you have a bad flash it just forces the phone to load into bootloader, from where you can flash another rom using pc or storage card to get your phone working again. Using a hardspl you can flash any carrier rom without cid unlocking your device first.
Radio = you are correct about your assumption as to what a radio does .
Now if you are flashing your carriers official rom than you don't need any of this stuff but different carriers set their cid in their roms so only phones that have their cid can flash those roms ... now if you like the wwe htc rom and want to flash it onto the tilt you will first need to hardspl your device or otherwise you won't be able to flash the rom ... it will time out with an error telling you invalid vendor id.

Many thanks! Now it is much clearer! Just one more question: why do people care so much for the radio and post their radio version to their signature? Is the radio revision so important? Why is it not just part of the rom?
Thanks again!

Black Antitoon said:
Many thanks! Now it is much clearer! Just one more question: why do people care so much for the radio and post their radio version to their signature? Is the radio revision so important? Why is it not just part of the rom?
Thanks again!
Click to expand...
Click to collapse
well radio is definitely important ... i mean if you have a uncompatible radio you will loose sound, camera, connection etc on your phone. Reason people list the radio they are using is basically to let others know what radio is working for them on the rom they have. This way if someone else doesn't know which radio to use with the rom than can use the radio they have listed. Radios are location dependant. Some radios give better reception here in states while others give better reception somewhere else in the world.
Most of the time chefs will include a radio with their rom, but some leave it out so you can choose the one that works best for you. Just a keynote to keep in mind when selecting radios is that wm6.1 roms need wm6.1 radios and wm6 roms need wm6 radios. Also DO NOT flash a radio that is intended for another device i.e a rapheal radio onto a kaiser (this will brick your device). There are exceptions to this rule. Also you should get your phone security unlocked before proceeding with flashing various kinds of radios. This will save you from getting stuck with a radio that locks itself to the device (thus rendering itself unchangeable; no matter how many times you flash another radio you will be stuck with that radio) an example of this is "the radio from hell" which alot of people in the kaiser forum got stuck with and weren't able to get rid of it until "FrankenKaiser" came along.
Hope this helps.

Thank you, it does.
Another term I read is Jump SPL. What's that?

Some poeple encounter problems trying to flash hardspl, Jump spl "jump starts" the process.
(problems like the kaiser white screen issue here)

Ok, thank you all.
Now I only have to wait for the Blackstone Hard SPL.

Black Antitoon said:
Ok, thank you all.
Now I only have to wait for the Blackstone Hard SPL.
Click to expand...
Click to collapse
aren't we all ... hold tight though they are close to getting it done.

How do you know that? In the placeholder topic there has been no update about the development status since a while.

WOW!!
Just wanted to say a HUGE thank you to thesire and joel2009 for being so extremely nice to a newbie!!! This is probably one of the first posts I have seen where a newbie doesn't get their head bitten off for asking a question. (I don't think I've ever asked a question for that very reason! LOL)
I was searching for the answer to 'what is SSPL' because I couldn't find it in the Wiki acronyms section. What a pleasant surprise! Sorry if this steers away from the topic but I just could NOT pass over this thread without saying THANKS!!!!!!!!

You wont get flamed for asking Questions in this Forum
as for the Acronyms, try here
http://forum.xda-developers.com/forumdisplay.php?f=265
more here : http://wiki.xda-developers.com/index.php?pagename=FAQ#techicalJargon
my friends, you need to master the art of searching

So I actually risked to find my skin burnt by the flame?
I didn't even know that there was a wiki/knowledge base here. Well, I actually felt somthing like that, but I completely forgot about that when searching. I searched carefully indeed, but only in the forum, and since lots of topics contain the words SPL, HSPL and so on, I was unable to find relevant results.
I'll look there next time, thank you all again.

missbizzylizzy said:
Just wanted to say a HUGE thank you to thesire and joel2009 for being so extremely nice to a newbie!!! This is probably one of the first posts I have seen where a newbie doesn't get their head bitten off for asking a question. (I don't think I've ever asked a question for that very reason! LOL)
I was searching for the answer to 'what is SSPL' because I couldn't find it in the Wiki acronyms section. What a pleasant surprise! Sorry if this steers away from the topic but I just could NOT pass over this thread without saying THANKS!!!!!!!!
Click to expand...
Click to collapse
hahaha.... why do you think i finally posted my first post after joining for 2 years. I just didn't want to tick someone off
Now i finally understood the term "SSPL & HSPL"!

how to find original SPL FOR HD2
Does anyone know where to fin dthe original 2.10 spl for hd2 so i can return it ?