Stuck with OliPof SPL 1.0... - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

When I first got my kaiser I flashed the OliPof HardSPL v1.0 (SPL-1.0.OliPof).
I'm now trying to upgrade to a later HardSPL (3.56) and it doesn't appear to be updating, according to the rainbow-screen.
I've tried JumpSPL with no success. Any Suggestions?
Chris
edit: Solved.

how did you solve this? same problem here

jtclist said:
how did you solve this? same problem here
Click to expand...
Click to collapse
In the 2nd post in the jockyw Hard SPL Thread there are two sets of instructions, read the second set.
Ta
Dave

wow! you guys dint even use search, did you?
its in the stickies up there..spoon-fed!

Related

Noobie Hard spl question

NOt sure if this is in the right topic, but its slightly rom related.
Can someone please help a noob
I cid unlocked my phone following the topic
http://forum.xda-developers.com/showthread.php?t=375583.
all worked well, tried a couple of roms and settled on
L26 WM 6.1 Professional WWE V6a (MMS and JAVA updated) rom, seems to be working ok, certainly all my apps work.
However like a typical noob I missed out on some important reading about hard spl and how it can protect my phone from a bad flash.
Now that I've done all of the above, is it too late to go back and protect my phone with hard spl?
SPL -1.0. Olipof
thanks in advance
I think that's done automatically when you flash hard spl.
(someone correct me if i'm wrong please)
step one in that unlocker would have flashed hardspl on your device, if u skipped it then no, its not too late, you can still do it now
XtreMe_G said:
step one in that unlocker would have flashed hardspl on your device, if u skipped it then no, its not too late, you can still do it now
Click to expand...
Click to collapse
No i didnt skip step one, so I guess I'm covered.
Guys thanks for the help, much appreciated!
Just go into bootloader mode (power button + camera button + reset). If the screen shows SPL-1.0.OliPof then you are ok. If not then just reflash hardSPL.
SPL-1.0.OliPof is there in bootloader.
thanks for the help guys.!

Hard SPL from SD

Im a bit of a noob with flashing ROM's etc. Have checked through the Wiki and through forums and had no luck.
Is there any way to flash Hard SPL from an SD card? I think I have a bad USB port on my TyTN II and cant get it synched with WMDC
i think most of that stuff can be found in the wiki, head on over and check it out
woolich21 said:
Im a bit of a noob with flashing ROM's etc. Have checked through the Wiki and through forums and had no luck.
Is there any way to flash Hard SPL from an SD card? I think I have a bad USB port on my TyTN II and cant get it synched with WMDC
Click to expand...
Click to collapse
Sorry mate, not possible at the moment, jockyw2001 was working on something, but he's a busy guy.
Ta
Dave
ya man jockyw is still workin on this, up to last week, weher he posted the news in a very similar thread..
still i cant imagine how will this work.. hardspl without and supporting os.. the only way to do it is to load a temporarily os to do it.. well we will look for jockyw's invention because this will be the ultimate tool to flashing
Is there any news about Hard Spl from SD? I have big problem with my Artemis. It should be very usefull for me :-(
drastys said:
Is there any news about Hard Spl from SD? I have big problem with my Artemis. It should be very usefull for me :-(
Click to expand...
Click to collapse
This may help you.
http://forum.xda-developers.com/showthread.php?t=420683
drastys said:
Is there any news about Hard Spl from SD? I have big problem with my Artemis. It should be very usefull for me :-(
Click to expand...
Click to collapse
There is a new method been developed which does not require a Windows PC to flash hard SPL, but it is not ready yet - I'll catch up with the developer when I'm at home...
This new method should work on all HTC devices BTW. The method jocky was working on (fixing the SoftSPL to read from the SD) would have only worked on the Kaiser (a seperate fix would have been needed for the Artemis).
Thanks
Dave
parleyp said:
This may help you.
http://forum.xda-developers.com/showthread.php?t=420683
Click to expand...
Click to collapse
I missed this reply, you must have beat me to the punch
This method only works for upgrading Hard SPL via the SD card. You still need USB to get Hard SPL on there in the first place.
Ta
Dave
DaveShaw said:
There is a new method been developed which does not require a Windows PC to flash hard SPL, but it is not ready yet - I'll catch up with the developer when I'm at home...
This new method should work on all HTC devices BTW. The method jocky was working on (fixing the SoftSPL to read from the SD) would have only worked on the Kaiser (a seperate fix would have been needed for the Artemis).
Thanks
Dave
Click to expand...
Click to collapse
It sounds good! When do you think that it will ready for use on Artemis? I have big problem with my Artemis. I able to run only bootloader and anything else. It is not accept USB ... :-(
DaveShaw said:
I missed this reply, you must have beat me to the punch
This method only works for upgrading Hard SPL via the SD card. You still need USB to get Hard SPL on there in the first place.
Ta
Dave
Click to expand...
Click to collapse
I have tried to get Hard SPL on my Tilt but it gets to Progress Bar and stays at 0%. Not sure how to make it progress?
Update to the New Hard SPL flash method?
DaveShaw said:
There is a new method been developed which does not require a Windows PC to flash hard SPL, but it is not ready yet - I'll catch up with the developer when I'm at home...
This new method should work on all HTC devices BTW. The method jocky was working on (fixing the SoftSPL to read from the SD) would have only worked on the Kaiser (a seperate fix would have been needed for the Artemis).
Thanks
Dave
Click to expand...
Click to collapse
Any updates to this yet? I am hoping this might be a possible solution to the flash issues described in this thread:
http://forum.xda-developers.com/showthread.php?t=558807
joerao said:
Any updates to this yet? I am hoping this might be a possible solution to the flash issues described in this thread:
http://forum.xda-developers.com/showthread.php?t=558807
Click to expand...
Click to collapse
No sorry, I don't think much is been done with the project, last time I spoke the authors were keeping it out of the public eye.
Dave

Flashed to Rom's stop at 16% and 18% ! Help

Hello,
KAISER (o2 realease.
Trying to flash to 6.1.
Sleuth V3 stops at 18% and Lex 26 Diamond V9 @ 16% - Installed as per the excllent Sleuth guidlines.
What am I doing wrong? - Being a newbie, I have suspicions the radio needs and upgrade however - Please can someone point me in the right directions.
Have recovered using Mitty http://forum.xda-developers.com/showthread.php?t=371154
Thankyou Mitty!!
Cheers all
Paul
Have you installed Hard SPL?
Everything you need to know about flashing is here: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading start following these instructions and let us know how far you get, before you have problems.
Thanks
Dave
pretty sure he missed the hardspl! use jockeyw hardspls if you want flashing wm 6.1 olipro will also work but its recommended to use a hardspl ripped from a wm 6.1 edition
DaveShaw said:
Have you installed Hard SPL?
Click to expand...
Click to collapse
Thanks for Reply
I have been using JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS.exe - When flashing both rooms - Will study your link and let you know if missed anything
Many thanks for the assistance
Jump SPL is used for Flashing Hard SPL's only. If you have flashed Hard SPL already, then you just plug in your phone to your PC via USB and use the KaiserCustomRUU tool.
Or Flash from SD Card (Instructions in the Wiki).
Thanks
Dave
Hey bro, I had the same problem. Figured out that you need to CID unlock the phone before you flash HardSPL. Fixed it for me. Good Luck!
Vampire2800 said:
Hey bro, I had the same problem. Figured out that you need to CID unlock the phone before you flash HardSPL. Fixed it for me. Good Luck!
Click to expand...
Click to collapse
Unless I'm suffering from amnesia, HardSPL IS the method for CID Unlocking.
I know, but I had to download & run the SID/CID unlocker for the hardSPL to work.
Buggin me bugging you
Hi Guys...
Bugging me
Have unlocked using http://forum.xda-developers.com/showthread.php?t=375583
Have hard flashed http://forum.xda-developers.com/showthread.php?t=354061
No change - still sleuth stops at 18%!!????
Have also tried on 3 different PC's ! and different USB connections on each pc.
Can the experts figure this one out!!? - Have ai not CID unlocked properly it reset to series of 00000's from 02something? -
Wife not pleased now 2 am has been twice with complaints of reset of active sink noises -tradgic....
Paul aka three 2008

after flashing new spl,didnt chang the spl

hi
i just tried to go from 3.56 to 3.29 SPL
i did everything like i all ways do but i think after everything i did
it didn't do any thing, and im still with the 3.56SPL
is their a way to chack what spl is running on my kaiser now?
(i used sspl-kais and after that i flashed the 3.29)
danny
speebman said:
hi
i just tried to go from 3.56 to 3.29 SPL
i did everything like i all ways do but i think after everything i did
it didn't do any thing, and im still with the 3.56SPL
is their a way to chack what spl is running on my kaiser now?
(i used sspl-kais and after that i flashed the 3.29)
danny
Click to expand...
Click to collapse
In the 3.* HardSPL thread there are two methods by Kyphur, try the second one - exactly as stated.
Please post any other problems in that thread.
@Mods, close this.
Ta
Dave
Closing Thread.
Please post in the corresponding/correct thread.
Thank you.

PM300 can't start after HardSPL

Hi all!
I have made HardSPL with help off this topic: http://forum.xda-developers.com/showthread.php?t=332320
after flash my Prophet restarts always... i mean i can see logo and IPL/SPL version and device goes in restart... if I turn it in bootloader mode it restarts after 3-4seconds.... I have tried to take off aku for a few minuts but thats doesn't help....
What can i do to get Prophet working again???
Help please...
recharge your battery
and btw are you following a thread on HARDSPL'ing thru wizard forums?? there are some here on the prophet forums too on how to hardspl... check that out too...
recharge your battery
Click to expand...
Click to collapse
really funny....
and btw are you following a thread on HARDSPL'ing thru wizard forums?? there are some here on the prophet forums too on how to hardspl... check that out too...
Click to expand...
Click to collapse
I'm already done with hardspl. have you read my post?
i know youre done with HARDSPL but have you seen this on wiki??
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
check the third button on NOTES
i got confused coz the thread you posted and followed for HARDSPLing your device is from the Wizard Forum thread.. while there are some threads here (Prophet forum)that can teach you to how to hardspl!

Categories

Resources