Hi all...!
We are working in SSPL and USPL for Pharos device.With them u can Flash any Rom in your device.
And we will release in this thread as soon as possible
cheers..!
GREAT!
we are wait for it!
p.s i'm ready to be a beta-tester
p.s.s do you have WWE rom?
Syrop said:
GREAT!
we are wait for it!
p.s i'm ready to be a beta-tester
p.s.s do you have WWE rom?
Click to expand...
Click to collapse
when uspl, hard spl release.Not only WWE rom.WM6.1 with other languages in plan too
good!
i made russian wm6.1, but can't flash
i wonder why how it's work. wait for release.
Waiting for you
Waiting for you, tom.
Thank you very much!!!
great! thnx for the good work! I'd like a wwe6.1 rom (or dutch)
Will follow up with your great work.
Refuel!Refuel!Refuel! Support
七月流火 said:
Refuel!Refuel!Refuel! Support
Click to expand...
Click to collapse
euuhmmm ?? what??!!??
Any news about the WM6.1 ROM?? I hope in an Italian version
Hey tom waiting for your Rom.......
Ok,
Now another problem.
I managed to upgrade my rom. But after doing so i replace my backup and now it boots but stops in the HTC screen.
I can start it back into bootloader mode, but I cannot reflash it because of the invalid vendor ID error.
How can I fix this ?
or does anyone have the standard Dutch Rom ?
thx in advance..
Same problem here.
Screen with HTC logo freeze and can't flash cause usb connection is lost.
Problem solved.
Do hard reset and fresh Windows screen apprear
wikki said:
Problem solved.
Do hard reset and fresh Windows screen apprear
Click to expand...
Click to collapse
I did a Hard reset by keycombination....
Prob Solved as well
My Pharos is dead. after I Flash rom
After reboot it show htc logo and turn to white screen with a short sound
I can't anything after that
The sync is lost
I hard reset but everything the same
help me a.s.a.p
please
this is rom that i use
htc Pharos (3470) Official ROM 1.11.707.1 from ruchonburi
กระทู้ SSPL & USPL htc 3470 (Pharos)
DIY-1.11-1.0
http://www.pdamobiz.com/show_news.asp?NewsID=144757&PN=1
Thank
[email protected]
thiwat said:
My Pharos is dead. after I Flash rom
After reboot it show htc logo and turn to white screen with a short sound
I can't anything after that
The sync is lost
I hard reset but everything the same
help me a.s.a.p
please
this is rom that i use
htc Pharos (3470) Official ROM 1.11.707.1 from ruchonburi
กระทู้ SSPL & USPL htc 3470 (Pharos)
DIY-1.11-1.0
http://www.pdamobiz.com/show_news.asp?NewsID=144757&PN=1
Thank
[email protected]
Click to expand...
Click to collapse
try this:
turn off the phone, press and hold camera button + green button + power button until bootloader screen appears. At this point plug the usb cable and try to flash official WWE ROM...
Cross the fingers and wait..
bye
Related
hello fox
i try to update my s200 to wm6 but i think i did some thing woring i dont know what ,,, but when i start the s200 i just come scren with close i dont know what i can do to fix it
any one help and told me what is the right Rom to s200 and i how i can fix my s200
thanks for help
tryed an hard reset?
which rom did you try to install and which model phone do you have, G3 or G4
Supr said:
tryed an hard reset?
which rom did you try to install and which model phone do you have, G3 or G4
Click to expand...
Click to collapse
thank you fOR ur answe
i am sorry to ask about that but realy am new in this
i try to install wm6 that i download from here ...
and realy i dont know what is rom I Try
my mobile is QTCK S200 !!!
how i can rest hard
´Thank U
first off have to ask what is your native tongue? i can use a translater to convert to english then my answer back. anyway
to hard reset press the camara button and the comm botton together and press and release the reset. keep holding the bottons until a black screen pops up and tells you to press the green phone botton(send)
you just hard reset the phone
after you do that if that doesnt work then what you need to do is flash with the qtek nvid rom if you need i can find the links to the rom to download.
press the camara button and then press the reset holding the camara button until the 3 color screen pops up. plug in the usb cable and reflash to that rom.
let it boot and make sure its usable. then upgrade to the rom of your choice. BTW what phone do you have? g3 or g4?
pen25 said:
first off have to ask what is your native tongue? i can use a translater to convert to english then my answer back. anyway
to hard reset press the camara button and the comm botton together and press and release the reset. keep holding the bottons until a black screen pops up and tells you to press the green phone botton(send)
you just hard reset the phone
after you do that if that doesnt work then what you need to do is flash with the qtek nvid rom if you need i can find the links to the rom to download.
press the camara button and then press the reset holding the camara button until the 3 color screen pops up. plug in the usb cable and reflash to that rom.
let it boot and make sure its usable. then upgrade to the rom of your choice. BTW what phone do you have? g3 or g4?
Click to expand...
Click to collapse
i try to hard rest like what u siad but is not working i dont know why mybe i need qtek nvid rom like what u said and realy i dont know what u mean by g4 and g3 ...
i have qtek s200 was working with normal sim card GMS NOT 3G
That all what i know !!!!
Thank for ur help
europsweden said:
i try to hard rest like what u siad but is not working i dont know why mybe i need qtek nvid rom like what u said and realy i dont know what u mean by g4 and g3 ...
i have qtek s200 was working with normal sim card GMS NOT 3G
That all what i know !!!!
Thank for ur help
Click to expand...
Click to collapse
when you boot it will list a series of #'s. please write them down.
ipl 1.00
spl 2.20.0000
gsm 02.47.21
os 10.2.0.8
that is what mine is. if your spl is 2.20.0000 the 0000 is g3 0001 is g4
Thank you for ur answer and help sir
when i try to open the Qtek s200 i just come screan with red and bule color
in left side Secran there is
ipl 2,10
spl 2,10
and in the right side UP There is RUU
THAT IS ALL
europsweden said:
Thank you for ur answer and help sir
when i try to open the Qtek s200 i just come screan with red and bule color
in left side Secran there is
ipl 2,10
spl 2,10
and in the right side UP There is RUU
THAT IS ALL
Click to expand...
Click to collapse
ok you upgraded the ipl and spl. there is a thread that talks about that let me find it and ill post the link to it that will explain how to fix this issue.
http://forum.xda-developers.com/showthread.php?t=307958
http://forum.xda-developers.com/showthread.php?t=307664
read both. hope this helps.
Thank u man for ur answer
where i can find this file
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_ Ship.exe
via google?
europsweden said:
Thank u man for ur answer
where i can find this file
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_ Ship.exe
Click to expand...
Click to collapse
yes i would suggest searching google. you will find several links. ntrunner can yuo confirm this will work for both g3 and g4? how would he find out if hes using a g3 or g4?
hello i dont find anytthink in google !!!
any links from here ___
im uploading the rom i used to downgrade mine back to 2.2
http://rapidshare.com/files/32855625/RUU_Prophet_220734_2207114_024721_NVID_QTEK.exe
again understand my prophet is a g3 so you need to make sure you dont have a g4 or until someone confirms this will work for either or.
pen25 said:
im uploading the rom i used to downgrade mine back to 2.2
http://rapidshare.com/files/32855625/RUU_Prophet_220734_2207114_024721_NVID_QTEK.exe
again understand my prophet is a g3 so you need to make sure you dont have a g4 or until someone confirms this will work for either or.
Click to expand...
Click to collapse
pen25
thanks u man for ur help
when i try to flash my Qtek s200 i start normal then we its come to 80% the color for upload change to read then its STOP !!11 I DONT KNOW WHAT IS THE FELLL!!!
Thank for ur help sir
europsweden said:
pen25
thanks u man for ur help
when i try to flash my Qtek s200 i start normal then we its come to 80% the color for upload change to read then its STOP !!11 I DONT KNOW WHAT IS THE FELLL!!!
Thank for ur help sir
Click to expand...
Click to collapse
i think there might be an issue with your phone version. you may need a flash for the g4. on the spl what is the complete #? you should have x.xx.xxxx in your case it should be 2.10.xxxx what is the last 4 digits? is it 0000 or 0001?
pen25 said:
i think there might be an issue with your phone version. you may need a flash for the g4. on the spl what is the complete #? you should have x.xx.xxxx in your case it should be 2.10.xxxx what is the last 4 digits? is it 0000 or 0001?
Click to expand...
Click to collapse
its 000000
europsweden said:
its 000000
Click to expand...
Click to collapse
ok. hard reset the device again. then remove the battery for a couple min. then flash with the nvid rom. follow the directions completely. hope that gets it going. if it doesnt then hopefully someone more experianced will help out.
What OS on your computer are you running?
Supr said:
What OS on your computer are you running?
Click to expand...
Click to collapse
i Run Windows Xp p SP2
i dont know why i stop when i get to 80% !!!
any one have answer plz
europsweden said:
i Run Windows Xp p SP2
i dont know why i stop when i get to 80% !!!
any one have answer plz
Click to expand...
Click to collapse
Just have some more patience! It is well known that flashing stops for a while at 80, 85, 95% and after a few minutes starts again and finish. Just give it some time!!
I setup Prophet device Rom to my Wizard G3 machine by mistake. "PDAViet 4.0.0.0.6 (mit TouchFlo(Passwort PDAVIET))" Upgrade_ROM.bat."
My machine stops in boot screen now. Windows doesn’t open. In spite of i reload its own roms, It stops on the same screen again. Windows don't open!
What should i do?
Thanks!
Current Screen;
IPL 3.08
SLP 3.08
GSM 02.19.11
""""OS 6.0.0.1"""""" I don't change.
http://img218.imageshack.us/img218/7505/picturech4.jpg
Hello,
You should flash again, from bootloader, (power button + camera button),
Then flash original rom,
after that you can flash the tnt again,
Yours Daniel,
I was tryed.
latii said:
Hello,
You should flash again, from bootloader, (power button + camera button),
Then flash original rom,
after that you can flash the tnt again,
Yours Daniel,
Click to expand...
Click to collapse
But don't run!
hasansar said:
But don't run!
Click to expand...
Click to collapse
Hey, if you will flash original WM5 rom you will be able to run it again... its not a problem of device. You just made a mistake and you can fix it by flash original WM5 rom.
After that you will be able to flash it with WM6 again
cheers!
Tnkx. I will Try Again.!
cortez said:
Hey, if you will flash original WM5 rom you will be able to run it again... its not a problem of device. You just made a mistake and you can fix it by flash original WM5 rom.
After that you will be able to flash it with WM6 again
cheers!
Click to expand...
Click to collapse
All right! if not run?..
cortez not run freeze in boot screen help meee
pls... help me ..
cortez said:
Hey, if you will flash original WM5 rom you will be able to run it again... its not a problem of device. You just made a mistake and you can fix it by flash original WM5 rom.
After that you will be able to flash it with WM6 again
cheers!
Click to expand...
Click to collapse
Whell its kind of strange. I'm dealing with this problem for quite a while! everytime after a few days i have to flash my phone. I also tried to install the original rom and afterwards I install a WM6 rom. I tried a lot of roms!
what is the bug im having:S:S
Hi.
My Problem was BatteryStatus. I checked the option "set clock after soft-reset" or something like that. This caused my wizard to freeze again and again with different roms.
Now everything works fine.
I tried to flash my kaiser today.
First I flash Hard SPL, then dutty's DualTouch v3 --> everything's fine except I would like a french WM6.
So I tried to rebuild my own Rom from HTC_TyTNII_FRA_1.56.406.5_22.45.88.07_1.27.12.17.
I try to flash my cooked Rom. Until that my kaiser is frozen on the 1rst screen showing the "smart mobility" logo in the middle of the screen and R 1.27.12.17 / G 22.45.88.07H / D 1.56.00.00 at the bottom right.
Is there any way to recover from this state?? Please help me, I know there are some masters there.
Hope for a positive answer...
n0n0
Buttons Power + Camera + SoftReset. You'll be in "Bootloader" with the three colors. And, reflash !
sorry to say but its a lost cause. your phone is trash....
I'll give you $75 for it....LOL
Just kidding. Do the above and you will be able to re-flash it. Good luck. If you have any further problems post up.
GOOD LUCK
YESSSSSSSSSS
Your the one !!!!!!!!!!!!!!!
You saved my Kaiser
Great!!!!!!!
Now I will reflash HTC Rom and forget everything about flashing!!!!!!!!
Thanks a lot
n0n0
n0n0 said:
YESSSSSSSSSS
Your the one !!!!!!!!!!!!!!!
You saved my Kaiser
Great!!!!!!!
Now I will reflash HTC Rom and forget everything about flashing!!!!!!!!
Thanks a lot
n0n0
Click to expand...
Click to collapse
Thanks to HardSPL
BOOT
Hi,my kaizer stuck in boot mode and when i try to flash i see vendor id eror!
Thanks for help!
This is a SSPL for use with esteve & pof's JumpSPL along with the HardSPL. It enables you to flash any ROM to your Pharos.
If you wanted to permanently unlock your device, the HardSPL was also available.
JumpSPL & HardSPL Instructions:
Transfer the extracted files (JumpSPL.exe & Pharos_JumpSPL.nb) to your device and execute.
Use 0x10000000 as Jump Address.
After getting the Open File Dialog, press [Camera] & [Power] like you are going to enter Boot Loader, then tab on the Pharos_JumpSPL.nb file (Pharos_JumpSPL.nb).
You will get the grey background screen, you can flash any ROM to your device at this point.
In some case, you may need to unplug and then plug the USB cable again.
If you wanted to permanently unlock your device, why not, simply flash it with the HardSPL once and you are done.
After HardSPL, you will notice your SPL version change when boot;
From SPL 1.11.0001
To SPL 1.11Mobiz
Recommended:
To make it easier, I recommend changing Button 3 (Camera) to <None> or the Camera may disturb you.
Download: Pharos_JumpSPL Rapid Share (165KB)Download: Pharos_HardSPL 1.11 Rapid Share (672KB)
Click to expand...
Click to collapse
Thank you to esteve & pof for the JumpSPL.
Thank you to Mr. Ru Chonburi who create the Pharos_JumpSPL.nb.
I am just the tester and author of this article, all work was done by Mr. Ru Chonburi of PDA Mobiz (http://www.pdamobiz.com).
Enjoy flashing ...
Great!!
Thank you
Great news,
Thanks to mr Ru Chonburi! (and to you too suracha)
so would it be possible to make a radio version that has wifi enabled (like they tried on the niki) that would be awesome!!
GREAT!
Thank you, guys!
Hard-SPL not work
[ERROR]Image File Corrupdet after flashing
Strange
Syrop said:
GREAT!
Thank you, guys!
Hard-SPL not work
[ERROR]Image File Corrupdet after flashing
Click to expand...
Click to collapse
It does work for me.
Were you in JumpSPL flashing (grey background page) when flashed the HardSPL to device? Sounds like you try to flash the HardSPL without running JumpSPL.
it does not work for me give me more instructions please!!
Grey screen
Have you seen the grey screen as result of running JumpSPL yet?
thankyou so much for the info...but it is not working for me as well as i am bit new for all this can you explain me in detail...and ya i got the grey screen as well but as i tried to flash the rom it says error and ends up.......please help me?
Re:
artoner974,brainoff
What is your spl version?
avathar behemoth said:
Great news,
Thanks to mr Ru Chonburi! (and to you too suracha)
so would it be possible to make a radio version that has wifi enabled (like they tried on the niki) that would be awesome!!
Click to expand...
Click to collapse
I Quote!!!
jarusa said:
artoner974,brainoff
What is your spl version?
Click to expand...
Click to collapse
my spl is 1.13.0000 , when i launch the RUU he say "update error" check your update utility., i've gota p3600 faman, an elfin french rom TEKKA Pointui and a pharos with a orange rom and i don't know how to flash him ,please help me if you can thx
jarusa said:
artoner974,brainoff
What is your spl version?
Click to expand...
Click to collapse
yeah great!!!!! it work fine!!!!!!
jarusa said:
artoner974,brainoff
What is your spl version?
Click to expand...
Click to collapse
My spl version is 1.11.0001 and i am trying to flash Blue_Elves_v5_ELF_4MbPP_WM6.1 to pharos but i am not being able please help me thankyou
brainoff said:
My spl version is 1.11.0001 and i am trying to flash Blue_Elves_v5_ELF_4MbPP_WM6.1 to pharos but i am not being able please help me thankyou
Click to expand...
Click to collapse
You can't flash the Elf rom to Pharos.
so which rom can i flash to my pharos can i flash........can i flash Merlot_Diamond_WWE_8MB this rom or not..........and what i have to do for flashing other roms...............please help
Hold on
brainoff said:
so which rom can i flash to my pharos can i flash........can i flash Merlot_Diamond_WWE_8MB this rom or not..........and what i have to do for flashing other roms...............please help
Click to expand...
Click to collapse
Hello brianoff,
You should wait for some times, Pharos ROM should be out very soon. To be honest, flashing a ROM builds for other model is not a good idea.
ok thankyou very much for your great support and hey can it be possible to add wifi in pharos by building another wifi radio....i was just wondering
Hi guys,
Good work.
Error here
"ERROR [270] : UPDATE ERROR The image file is corrupted. Please check your Update Utility"
Any ideia?
Error [270]
Hello wiki,
What did you flash?
Is it the HardSPL or you flashed any thing else?
It's possible to send mi the two files at [email protected]
Please
Hello People
I have installed WM6.1 Rom.
But today (i dont know why (i'm a idiot)) i wanted WM6 back, when I restart, i cant start my Phone (HTC screen... and nothing happens) the phone doesnt continue to start.
Cane someone please help me?
EDIT: Hard Reset doesnt work
EDIT2: the same problem here:
http://forum.xda-developers.com/showthread.php?t=319448
Also, My HTC S710 phone don't wanna connect to the PC.
Sorry my english, i am Dutch speaker.
Thanks
JDMHatchy said:
Hello People
I have installed WM6.1 Rom.
But today (i dont know why (i'm a idiot)) i wanted WM6 back, when I restart, i cant start my Phone (HTC screen... and nothing happens) the phone doesnt continue to start.
Cane someone please help me?
EDIT: Hard Reset doesnt work
EDIT2: the same problem here:
http://forum.xda-developers.com/showthread.php?t=319448
Also, My HTC S710 phone don't wanna connect to the PC.
Sorry my english, i am Dutch speaker.
Thanks
Click to expand...
Click to collapse
And, do you have test reflash ?
fireburned said:
And, do you have test reflash ?
Click to expand...
Click to collapse
I think not,.. how you reflash it?
JDMHatchy said:
I think not,.. how you reflash it?
Click to expand...
Click to collapse
Enter bootloader mode and reflash :
- switch off your phone, hold the camera button and connect the usb cable. If USPL was flashed you should have no problem flashing another ROM
Bye
fireburned said:
Enter bootloader mode and reflash :
- switch off your phone, hold the camera button and connect the usb cable. If USPL was flashed you should have no problem flashing another ROM
Bye
Click to expand...
Click to collapse
I See the RED - GREEN - BLUE Screen..
Look at the Wiki article on SD-Card flashing, that should be the easiest way to flash the ROM again!
Flash ROM/Radio from SD-Card
http://wiki.xda-developers.com/index.php?pagename=vox_sdcardflashing
1) Once you have all the files you need, either from the kitchen or from prepackaged ROMs (they can be extracted with WinRAR),
What Files do they mean? + where do i get these files?
=(
That just means that you have to have the ROM, either from the forum or self made through the kitchen! In your ROM there is a *.nbh file. Just follow the steps from there. The nbh is the only file you will need!
frauhottelmann said:
That just means that you have to have the ROM, either from the forum or self made through the kitchen! In your ROM there is a *.nbh file. Just follow the steps from there. The nbh is the only file you will need!
Click to expand...
Click to collapse
I have tried the SD Card Flashing, by following the instructions on the wiki. The bootloader will scan my SD card but comes up with and Invalid Certificate error and won't start the upgrade.
What now?
Dutch
Buy HTC Diamond, and never again repair what is working fine! :-D
P.S.: Sorry my English Im Czech speaker.