Database Info

How to get back to Dopod official ROM From LsvW AKU 2.3.1 ROM

any one could help me? how to get back to dopod official ROM version: 2.15.13.27 WWE from LsvW 2.3.1 ROM or just show me the link to that thread(s). i just up grade to LsvW 2.3.1 ROM and failed, now my prophet brick.

Re: How to get back to Dopod official ROM From LsvW AKU 2.3.1
zk9 said:
i just up grade to LsvW 2.3.1 ROM and failed, now my prophet brick.
Click to expand...
Click to collapse
Congratulations.

You might want to give some more info. Is your device a G3 or a G4?
Perhaps flasing it with the 2.20 qtek rom might work, because I believe LsvW uses that as a base for his modded ROM. Intructions are in that thread.
Can you still get into the bootloader? Because that's vital in reflashing the device. Bricked = when you cannot get into bootloader anymore :/
When I tried to flash with the LsvW rom my device would get stuck in bootloader and then I fixed it by upgrading with the qtek rom.
But! this will not mean this is the same on your device. So a little bit more info about where it hangs, what steps you took etc etc is better so we can help you.

RaptorRVL said:
You might want to give some more info. Is your device a G3 or a G4?
Click to expand...
Click to collapse
mine is G3 SPL 2.xx.0000
RaptorRVL said:
Can you still get into the bootloader? Because that's vital in reflashing the device.
Click to expand...
Click to collapse
first when i try to flash with LsvW 2.3.1 it stuck on bootloader with three color and i try to re flashing again with the same rom 2.3.1 and it's just black / Bricked?
FYI before flash with 2.3.1 i have tried to flash with 2.3.0 and its succeded
RaptorRVL said:
Perhaps flasing it with the 2.20 qtek rom might work, because I believe LsvW uses that as a base for his modded ROM. Intructions are in that thread.
Click to expand...
Click to collapse
still downloading the qtek rom. i will tell how it goes. tanks

I don't have any experience with G3 devices, but...
My only guess is that you might try to unlock it so you can downgrade without any problems.
I just don't have any idea how to do that (other than reading the wiki ). So maybe someone who might have been in the same situation knows and is willing to help you... Perhaps you first need to get it running again before you can unlock.
But you only have a black screen and can't get into the bootloader? That doesn't sound too good :/ Have you tried getting into the bootloader with pressing the camera button and then reset (while holding the camerabutton)? (explaination found here)
If that works there is still hope

Problem solved
RaptorRVL said:
....... Have you tried getting into the bootloader with pressing the camera button and then reset (while holding the camerabutton)? (explaination found here)
If that works there is still hope
Click to expand...
Click to collapse
Yup , it can..and then i flash qtek rom. then reflash again with LsvW 2.3.1 now it work smoothly.
Tanks RaptorRVL

That's great to hear!

Ok the thing is not working

Hello I have done all the Faria tutorial and got it unlocked and IPL AND SPL 3.08, but when I tried flashing a WM6 rom the process stuck at 6% and the update program gave me a "conection failure" error and then started a step by step recovery process... I have done it and now i´m with the 3 colors screen (red green blue) but I´m trying to flash a rom to it without success. why is that? can someone help me?

you need to read this thread
http://forum.xda-developers.com/showthread.php?t=314646

I hope you weren't flashing with vista. I think it requires the shell tool.

no, no vista.
I have followed EVERY instruction in the VIPPIE: http://forum.xda-developers.com/showthread.php?t=298613 and FARIA tutorials, the problem was that when flashing it gave me a connection problem at 6% and then is not stuck in the bootloader screen. I hope my phone is not damaged since i´m in brazil. But I´ve tried several roms without success... they say problems with version OR with connection. Why can that be?

it stays a long time in "verifying the information on your PDA phone..." and then it returns those errors I´ve mentioned.

flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html

n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
thank you man!!! I will try that right away!!!

n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??

fscussel said:
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??
Click to expand...
Click to collapse
Once unlock...always unlocked unless you reversed the procedure.
If your flash of a custom rom fails again, your device is probably not CID unlock and you need to go thru the unlocking process again.

ok after fixing the problem with the n3rxs help I´ve flashed the Wizard Love rom to prepare to flash a WM6 rom. The Wizard love rom i´ve used has a Italian instalation program, is that right? after I installed it the cell phone keeps reestarting I can´t do anything in it, it only loops restarting... what´s that?

found the solution, had to keep the camera button pressed and then reset the device so it enters in BootLoad mode then I flashed a original cingular bios and after that upgraded to WM6 without a glitch!!

SSPL, USPL Another way to flash *ANY* rom to your device!

Hi all...!
We are working in SSPL and USPL for Pharos device.With them u can Flash any Rom in your device.
And we will release in this thread as soon as possible
cheers..!

GREAT!
we are wait for it!
p.s i'm ready to be a beta-tester
p.s.s do you have WWE rom?

Syrop said:
GREAT!
we are wait for it!
p.s i'm ready to be a beta-tester
p.s.s do you have WWE rom?
Click to expand...
Click to collapse
when uspl, hard spl release.Not only WWE rom.WM6.1 with other languages in plan too

good!
i made russian wm6.1, but can't flash

i wonder why how it's work. wait for release.

Waiting for you
Waiting for you, tom.
Thank you very much!!!

great! thnx for the good work! I'd like a wwe6.1 rom (or dutch)

Will follow up with your great work.

Refuel!Refuel!Refuel! Support

七月流火 said:
Refuel!Refuel!Refuel! Support
Click to expand...
Click to collapse
euuhmmm ?? what??!!??

Any news about the WM6.1 ROM?? I hope in an Italian version

Hey tom waiting for your Rom.......

Ok,
Now another problem.
I managed to upgrade my rom. But after doing so i replace my backup and now it boots but stops in the HTC screen.
I can start it back into bootloader mode, but I cannot reflash it because of the invalid vendor ID error.
How can I fix this ?
or does anyone have the standard Dutch Rom ?
thx in advance..

Same problem here.
Screen with HTC logo freeze and can't flash cause usb connection is lost.

Problem solved.
Do hard reset and fresh Windows screen apprear

wikki said:
Problem solved.
Do hard reset and fresh Windows screen apprear
Click to expand...
Click to collapse
I did a Hard reset by keycombination....
Prob Solved as well

My Pharos is dead. after I Flash rom
After reboot it show htc logo and turn to white screen with a short sound
I can't anything after that
The sync is lost
I hard reset but everything the same
help me a.s.a.p
please
this is rom that i use
htc Pharos (3470) Official ROM 1.11.707.1 from ruchonburi
กระทู้ SSPL & USPL htc 3470 (Pharos)
DIY-1.11-1.0
http://www.pdamobiz.com/show_news.asp?NewsID=144757&PN=1
Thank
[email protected]

thiwat said:
My Pharos is dead. after I Flash rom
After reboot it show htc logo and turn to white screen with a short sound
I can't anything after that
The sync is lost
I hard reset but everything the same
help me a.s.a.p
please
this is rom that i use
htc Pharos (3470) Official ROM 1.11.707.1 from ruchonburi
กระทู้ SSPL & USPL htc 3470 (Pharos)
DIY-1.11-1.0
http://www.pdamobiz.com/show_news.asp?NewsID=144757&PN=1
Thank
[email protected]
Click to expand...
Click to collapse
try this:
turn off the phone, press and hold camera button + green button + power button until bootloader screen appears. At this point plug the usb cable and try to flash official WWE ROM...
Cross the fingers and wait..
bye

AT&T Tilt blank screen after Kaiser Sim Unlocker!

The screen remains black, blank, and does not light up, even though activesync knows the device has booted because the icon becomes green. I can't navigate any controls, though the keys do light up when I slide it, or press buttons. Screen remains blank/black.
Here is what I did to get to this state:
1) I first hard reset my Kaiser, to reset all user preferences. This I accouplished by pressing both soft keys while pressing power (if I recall correctly), then hitting the green call button. It then installed Windows Mobile fresh.
2) I then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
3) I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way.
What should I do? Did I miss something? Is this recoverable?

It also does not have any sound. Does this mean I can't unlock?
How do I flash back to the original rom?

Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.

NetTechie said:
Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.
Click to expand...
Click to collapse
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10

I have a problem... it wont go green now, I can't get activesync to go green. I wont be able to load the rom... what can I do?
[ EDIT ]
A reboot fixed this *sigh of releif*. Goes green now.

AllTheWay said:
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10
Click to expand...
Click to collapse
Ok, question: Will I use the file in Step 3 to put that on the phone? It is saying there is a file open...? I can't disable USB on the device, as the screen is blank.
[EDIT] Looks like everything I needed was in the download. I put the other ROM back on. However, I'm having a problem with activesync... When I click on Connection Settings active sync freezes up. Any ideas what to do to fix ActiveSync so I can turn off USB, without crashing ActiveSync?

Okay, I got the screen with the unlock code... only it gave me this readout:
Your Unlockcode = ........
just like that, with dots.
Is there any way to unlock a phone, if the screen goes black? I can go back to the old firmware, but this special firmware is needed I think to do the unlock, and this special firmware makes the screen go black on my model.
EDIT: On page 33 of the Kaiser unlocker topic, I found what looks like my answer. I need the AT&T 1.57 ROM, as it is compatible with this patched radio so the display will work. Unfortunately, I haven't been able to find it on this forum yet. EDIT 2: Found it, loading it on now: http://www.4shared.com/file/3857459...ULAR_WWE_157_-_Originaly_Shipped_ATT_ROM.html

Unlock worked, once I had the AT&T 1.57 version of the ROM on there. ActiveSync still freezes, but I uninstalled it for the section where I was supposed to disable USB. Installed the 1.27.12.11 radio after completing the unlock, replacing the patched radio. All finished.

Mine still showsup Blank screen
Hi,
I followed the same steps as yours :
Firstly I reset my Kaiser & then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way
Now I tried flashing
http://www.4shared.com/file/36681926...CustomRUU.html
But it didnot help (
Can you please tell me what I should be doing next..

vrramakanth said:
But it didnot help (
Can you please tell me what I should be doing next..
Click to expand...
Click to collapse
what do you mean when you say it "didn't help"?

I still get the blank screen..I am now downloading the AT&T 1.57 version .. I am hoping if I install this I will get the display and I can proceed to step 8a, 8b,..

Sorry to be short,
But did you even bother reading through the other threads with the exact same problem as you?
the problem you have is that you flashed an incompatible radio with the ROM that you are runing on the phone. You need to reflash the ROM with a rom that is compatible with the radio or reflash the radio rom to what came with the phone rom that you are running.
You should have upgraded to a 6.1 cooked rom prior to doing the SIM/CID unlock.
Flash your phone with a cooked 6.1 rom that INCLUDES the radio, and then try the CID/SIM unlocker.
my two bit.

I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html, which is the ROM that comes with this phone. Do u think this helps? Do u want me to flash 6.1 ROM instead of this?

No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).

ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..

vrramakanth said:
ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..
Click to expand...
Click to collapse
It's not a wrong question
1. Yes, that fits in
2. No, you do not need to upgrade to 6.1 before this, flashing the ROM will take care of it
hope this helps

Thanks mbarvian!!
So I am Installing the upgrade to 6.1 ROM, but do I still need to install the correct AT&T ROM that you gave me in the other thread http://forum.xda-developers.com/showthread.php?p=2452022#post2452022?
Thanks!!

Alibaba0101 said:
No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).
Click to expand...
Click to collapse
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse

vrramakanth said:
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Click to expand...
Click to collapse
Yes, now you would want to download and flash the ROM I gave you in the other thread
here's the link:
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe

I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html is this fine??

Help...Stuck on Boot screen

I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!

First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.

Thanks 4 the reply... I will have a go and see what happens.

I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????

You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.

NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????

Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?

Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.

You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash

NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...

I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !