Database Info

Ok the thing is not working

Hello I have done all the Faria tutorial and got it unlocked and IPL AND SPL 3.08, but when I tried flashing a WM6 rom the process stuck at 6% and the update program gave me a "conection failure" error and then started a step by step recovery process... I have done it and now i´m with the 3 colors screen (red green blue) but I´m trying to flash a rom to it without success. why is that? can someone help me?

you need to read this thread
http://forum.xda-developers.com/showthread.php?t=314646

I hope you weren't flashing with vista. I think it requires the shell tool.

no, no vista.
I have followed EVERY instruction in the VIPPIE: http://forum.xda-developers.com/showthread.php?t=298613 and FARIA tutorials, the problem was that when flashing it gave me a connection problem at 6% and then is not stuck in the bootloader screen. I hope my phone is not damaged since i´m in brazil. But I´ve tried several roms without success... they say problems with version OR with connection. Why can that be?

it stays a long time in "verifying the information on your PDA phone..." and then it returns those errors I´ve mentioned.

flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html

n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
thank you man!!! I will try that right away!!!

n3rxs said:
flash the stock Cingular ROM from HTC's website it will flash for you from the RBG screen
http://www.america.htc.com/support/8125/software-downloads.html
Click to expand...
Click to collapse
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??

fscussel said:
man, you are a life savier!!! worked flawlessly... now does I have to unlock the cid again or can I flash a Wm6 rom right away??
Click to expand...
Click to collapse
Once unlock...always unlocked unless you reversed the procedure.
If your flash of a custom rom fails again, your device is probably not CID unlock and you need to go thru the unlocking process again.

ok after fixing the problem with the n3rxs help I´ve flashed the Wizard Love rom to prepare to flash a WM6 rom. The Wizard love rom i´ve used has a Italian instalation program, is that right? after I installed it the cell phone keeps reestarting I can´t do anything in it, it only loops restarting... what´s that?

found the solution, had to keep the camera button pressed and then reset the device so it enters in BootLoad mode then I flashed a original cingular bios and after that upgraded to WM6 without a glitch!!

Flashing Radio ROM

I want to flash my current radio rom (1.27.12.11) to 1.27.12.17. but if i open the EXE of the file i get the flash window. and if i click update. it shows me that my current image is version 1.56.404.6 and if i want to update it to 1.00.000.0 ... so whats up? is that normal?
and is this safe to do?
i have an unbranded HTC TyTN 2

Hi
That's normal. The version number relates to the whole ROM, but as you are only flashing the radio that question and version comparison is meaningless.
Just flash and you will see the radio rom version change to the new one and everything else remains the same.
Regards
Phil

its stuck at 0%... my AS connection dissapeared.. what now?
i managed to reboot it correctly, but my AS disconnects at the colour screen... why is that?

On this topic, I want to flash this new radio also, but I don't trust Vista, my Sync connection is always doing crazy things, its my vista that toast.
So can I Flash a Radio just using the SDcard method?
And how?
Thanks
Oh, btw, HI all, my First post, and 1 month with my Kaiser!
And a noob question, whats the difference from a TouchFlo rom to a non-Touchflo?...

Hi
i managed to reboot it correctly, but my AS disconnects at the colour screen... why is that
Click to expand...
Click to collapse
ActiveSync will disconnect at the coloured screen as it isn't ActiveSync in use at that point.
You also likely need HardSPL installed, if you haven't already please see the top threads in this forum for info as to how it all works.
Regards
Phil

Well im trying to install HardSPL. but when it comes to the tricoulour screen i have to unplug and plugin back my USB. AS disconnects as it should. and RUU starts. now it says make connection trough AS.... how? i cant get it to connect anymore and i need to reset my device in order to be connected again..
*edit* nevermind it worked. just ignore and go to update and click update

I had the exact same problem with Windows Vista. Tri-colour screen and Hardspl wouldn't continue.
Everything worked until the Unplug-replug part, and thats where is all stopped.
Had to soft reset device to get it back.
Still haven't figured it out.
Question to Seniors, if my Kaiser is "Free" or "Open", do I need hardSPL?
Or is HardSPL for getting around unsigned roms?
EDIT:
Ok did some reading, and understand HardSPL a bit better now...
One problem was the USB with thought a HUB, and not directly connected. Second problem was Vista not finding some driver, needed a reboot, Strang, ... anyway.
ITs on!!!
I think I got it Flashed on my Kaiser, but how do I KNOW, is there a way to check?
Edit: Figured this out too, My TriColour is now different, the USB was up top, its not lower and it says something about SPL by pof..
Hope you have more luck Imperium, I now have Radio .17 on my Kaiser.

Hard SPL Problems

I have problems to use the Hard-Spl v1. I have a new HTC-Kaiser from T-Mobile. I start the Application HARD-SPL (I want to upgrating with Dutty´s ROM)
I run the kaiser-hardSPL.exe on Computer (PC)
I follow instructions on screen!!!!!
on the mobile i the question to start the applikation i answer Yes and then i get a with screen on the HTC Kaiser. NO tri-color-screen !!!
Please help, thx
Thomas

Thomas_Germany_Hamburg said:
I have problems to use the Hard-Spl v1. I have a new HTC-Kaiser from T-Mobile. I start the Application HARD-SPL (I want to upgrating with Dutty´s ROM)
I run the kaiser-hardSPL.exe on Computer (PC)
I follow instructions on screen!!!!!
on the mobile i the question to start the applikation i answer Yes and then i get a with screen on the HTC Kaiser. NO tri-color-screen !!!
Please help, thx
Thomas
Click to expand...
Click to collapse
From what I've read you need to remove your sim card and your microsd card then try again

There is no simcard and microsd in the htc Kaiser.
on the HTC Kaiser is the original T-Mobile software, nothing else

Perhaps your problem is related to new SPL... take a look at http://forum.xda-developers.com/showthread.php?t=349476
Cheers.

When your phone is booting up, look in the lower right corner. If you have a line that reads:
D 1.57.00.00
Then you most likely have the issue in the thread mentioned by jcespi2005. If you have:
D 1.56.00.00
Then its probably something else (as 1.56.00.00 should be able to do the HardSPL).

Why not flash the old SPL to the device then you can use Hard_SPL. I havent checked but arent there original ROM available(of course CID/carrier specific) from before 1.57.

wpbear said:
Why not flash the old SPL to the device then you can use Hard_SPL. I havent checked but arent there original ROM available(of course CID/carrier specific) from before 1.57.
Click to expand...
Click to collapse
The real problem is SSPL used to flash HardSPL is not working with this one, so you can't go back to previous SPL... don't know what shipped ROMs are out that allows flash over this SPL...but perhaps this can be a way to go...
Cheers.

The Rom of my Phone is d.1.56.00.00 !
I do a hardreset, but Hard SPL dont work!

well... for the Tilt you can't flash the "official" ROM back to the device because of an "Invalid Vendor ID", I'm not sure why this is but it just doesn't work. You can however flash the AKU0.4.4 ROM to an unmodified Tilt so the CID apparently is good on that ROM. However I've done this and it does not fix the "white screen" issue on the affected devices.

sirsycho said:
well... for the Tilt you can't flash the "official" ROM back to the device because of an "Invalid Vendor ID", I'm not sure why this is but it just doesn't work. You can however flash the AKU0.4.4 ROM to an unmodified Tilt so the CID apparently is good on that ROM. However I've done this and it does not fix the "white screen" issue on the affected devices.
Click to expand...
Click to collapse
oh well it was an idea. Another reason for me to put off the Tilt purchase.

wpbear said:
oh well it was an idea. Another reason for me to put off the Tilt purchase.
Click to expand...
Click to collapse
I might be returning mine because of this. Bummer.

Reverting to official RUU with HardSPL

I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum

flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.

Thank you sir. Greatly appreciated

flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.

One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM

flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.

Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help

wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there

I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.

ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.

This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4

smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?

this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.

Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...

Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz

Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!

angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?

hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)

Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj

HardSPL 1.24

Hi to all. Is there anyone who can help me with HardSPL my snap which shows SPL 1.24. I would like to use some of the cooked roms. Cheers.

rocksford77 said:
Hi to all. Is there anyone who can help me with HardSPL my snap which shows SPL 1.24. I would like to use some of the cooked roms. Cheers.
Click to expand...
Click to collapse
Try ookba's roms, use Auto_1.19 worked for me... If it all goes wrong as we now have a shipped rom you can fall back to SD flash as in this post:
http://forum.xda-developers.com/showpost.php?p=4872255&postcount=78

ibanyard said:
Try ookba's roms, use Auto_1.19 worked for me... If it all goes wrong as we now have a shipped rom you can fall back to SD flash as in this post:
http://forum.xda-developers.com/showpost.php?p=4872255&postcount=78
Click to expand...
Click to collapse
No, it didn't work for me. I thought by now there will be a solid solution to this. Now we are stuck with stock roms as we cannot HardSPL our devices.
SPL 1.24 is hard to hack. Anyone got any solutions??????

rocksford77 said:
No, it didn't work for me. I thought by now there will be a solid solution to this. Now we are stuck with stock roms as we cannot HardSPL our devices.
SPL 1.24 is hard to hack. Anyone got any solutions??????
Click to expand...
Click to collapse
What didnt work?
I ran the Auto_1.19, (it prompted that device wasnt connected a couple of times, then got the prompt on the device to ask if an application should be run, selected yes (using left softkey), then had to use the trackball to select yes (the screen obscures some of the prompt), then screen went black and RUU began upgrade proces..

ibanyard said:
What didnt work?
I ran the Auto_1.19, (it prompted that device wasnt connected a couple of times, then got the prompt on the device to ask if an application should be run, selected yes (using left softkey), then had to use the trackball to select yes (the screen obscures some of the prompt), then screen went black and RUU began upgrade proces..
Click to expand...
Click to collapse
When I use Auto_1.19, i press the track ball on my device, I get an Error message and asks me to send the error to microsoft.

rocksford77 said:
When I use Auto_1.19, i press the track ball on my device, I get an Error message and asks me to send the error to microsoft.
Click to expand...
Click to collapse
Try with the older version if still fails might be worth a hard reset....

Anyone knows if HardSPL for SPL 1.24 is developed yet?

HArder SPL 1.24
Yeah anyone? I have a SNAP with SPL 1.24 running WINDOWS Mobile 6.5 but I cannot for the life of me get any of the JockyW SPL's to work 1.17 or 1.19. I hate these Bloody Telstra / HTC phones, there locking them down so tightly nowdays. Not even the SDA unlocker works.. it tells me the phone is unlockable

SNAP with 1.22 Telefonica
Hi ther,
I´m running with a SNAP from Telefonica with SPL 1.22 and WM6.1 which doesn´t let me install any of the ROMS here. Not even upgrade to 6.5 of original ROM from HTC. It says 294 invalid vender ID.
I have also tried aplication unlocker.. and nothing seems to work.
A few questions... has HardSPL 1.24 been released?
Any ideas to be able to flash a new rom onto this baby...
Thanks
OkiOKi.

I have MAPL110 with SPL-1.24.0000. Successfully flashed by hspl 1.17 and
this ROM - 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.2.50.112509.

succesfully flashed spl 1.25. used hard spl 1.19 through activesync. stuck on tmo load up page then used bootloader then flashed 11.25.09 rom from there.
all went well and my wife has a newish dash for $100